Systems Engineering and Multidisciplinary Design Optimization Commons^™

Nozzle Erosion Reconstruction Model For Data Analysis In Rocket Engines And Correlation With Chamber Pressure, Ryan J. Thibaudeau, Stephen A. Whitmore

Mechanical and Aerospace Engineering Student Publications and Presentations

Graphite nozzles remain the dominant choice for small hybrid and solid rocket motors operating on laboratory and university budgets, owing to their low cost, ease of machining, and rapid turnaround during iterative design campaigns. These same programs, however, must contend with the fact that graphite erodes through coupled thermochemical and mechanical mechanisms when exposed to the oxidizing species generated by high-energy propellant combustion, and the resulting throat-area growth fundamentally alters the time histories of chamber pressure, thrust, and delivered specific impulse. This paper presents a nozzle-erosion reconstruction model that extracts the time-resolved throat area from coupled thrust and chamber-pressure measurements …

Design Optimization Of Active-Stabilizing Canards For High-Powered Rockets, Simon Babcock

Senior Honors Theses

Rocket canards are a common means of stabilizing a high-powered rocket in flight by producing aerodynamic forces to correct the rocket's trajectory. The size, shape, and position of the canards relative to the rocket body determine their control effectiveness and aerodynamic efficiency – two objectives of canard design with an inverse relationship to each other. By integrating automated iterative rocket trajectory simulation with adaptive surrogate modelling, this research optimized the canard planform geometry for a high-powered rocket to maximize the canards’ control effectiveness and aerodynamic efficiency through multi-variable, multi-objective design optimization. The canard design was first parameterized into four design …

Evaluating Regularized Logistic Regression And K-Nn On Mnist Under Increasing Random Missingness, Daniel Markwei

Data Science and Data Mining

This paper investigates the effect of random missingness on the performance of regularized multinomial logistic regression and the k-nearest neighbors (k-NN) classifier for handwritten digit recognition on the MNIST dataset. In particular, we study L1-regularized (LASSO) logistic regression and L2-regularized (Ridge) logistic regression alongside k-NN. Varying percentages of random missingness were introduced into the original dataset, and each model was evaluated in terms of its classification performance. The results show that random missingness degrades the performance of all three classifiers. Overall, k-NN consistently achieves higher accuracy than both L1- and L2-regularized logistic regression across all missingness levels; however, its performance …

Gradient-Based, Post-Optimality Sensitivity Analysis With Respect To Parameters Of State Equations, Gene Hou, Jonathan Degroff

Mechanical & Aerospace Engineering Faculty Publications

Design optimization is a computational tool that can enable a designer to investigate the effectiveness of a design concept in an organized format. However, this design process requires the design variables, constraints, and objective function to be properly defined and expressed in mathematical forms. Post-optimality analysis thus becomes a necessary step to investigate different variations in the problem formulation and parameters to ensure that optimization produces a stable and trustworthy outcome. One efficient way to achieve this aim is to compute the local derivative of the optimized objective function with respect to the optimization problem parameters, such as bounds on …

Performance Of Adaptive Wingtips On A Tailless Supersonic Business Jet, Khushi Piparava

2025 Fall Honors Capstones Projects - Archive

The growing interest in supersonic business travel has renewed focus on efficient, low-drag configurations that can achieve high performance while maintaining stability and structural integrity. This research investigates the aerodynamic and structural implications of adaptive folding wingtips on a tailless supersonic business jet (SBJ) concept designed under the SkyBreaker senior design program. Using a conceptual aerodynamic model based on linearized supersonic theory, the Polhamus leading-edge suction analogy, and an empirical compression-lift correlation, the study evaluates how varying wingtip droop angles influence lift, drag, lift-to-drag ratio (L/D), and static stability. The analysis was performed parametrically in MATLAB, using geometry inputs derived …

Distributed Coherent Beamforming At 60 Ghz Enabled By Optically-Established Coherence, Drake Silbernagel, Yu Rong, Isabella Lenz, Prithvi Hemanth, Carl Morgenstern, Owen Ma, Nolan Matthews, Nadar Zaki, Kyle W. Martin, John D. Elgin, Jacob Holtom, Daniel W. Bliss, Kimberly Frey

Space Dynamics Laboratory Publications

We implement and experimentally demonstrate a 60 GHz distributed system leveraging an optical time synchronization system that provides precise time and frequency alignment between independent elements of the distributed mesh. Utilizing such accurate coherence, we perform receive beamforming with interference rejection and transmit nulling. In these configurations, the system achieves a coherent gain over an incoherent network of N nodes, significantly improving the relevant signal power ratios. Our system demonstrates extended array phase coherence times, enabling advanced techniques. Results from over-the-air experiments demonstrate a 14.3 dB signal-to-interference-plus-noise improvement in interference-laden scenarios with a contributing 13.5 dB null towards interference in …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Choosing Robust Leadership: Encompassing The Best-Of-N Model And Swarm Intelligence Optimization For Heterogeneous Multiple Autonomous Unmanned Aerial Vehicle Systems, Kudamuhandiramlage Harith Kolitha Warnakulasooriya

Shelby Hall Graduate Research Forum Presentations

Presentation slides for a presentation given at the 1st annual Shelby Hall Graduate Research Forum at the University of South Alabama.

Drone-Based Medication Delivery For Rural, Flood-Prone Coastal Cities, Yin-Hsuen Chen, Amro M. El-Adle, Kevin J. O'Brien, Taylor Wentworth, Heather G. Richter

Center for Geospatial Science, Education & Analytics Faculty Publications

Access to healthcare remains a critical challenge for rural populations, particularly in flood-prone coastal communities where transportation barriers limit access to essential medical services. This study evaluates the effectiveness of drone-based medication delivery in improving healthcare accessibility for vulnerable populations on Virginia’s Eastern Shore. Compared to traditional personal vehicle travel, drone delivery reduced trip times from up to 50 minutes to under 10 minutes for more than 80% of the population, including elderly patients. Using publicly available datasets, we developed two transportation vulnerability indices that incorporate age, travel time, and flood risk to prioritize patients for drone-based pharmaceutical delivery. These …

Assembly, Integration And Test, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

What is “AI&T”

• A continuous, iterative process of turning low level components into the system of hardware, software and ground tools that meet YOUR mission

• Teaching the engineering team to UNDERSTAND the system they’ve built

• It does exactly what it was designed to do, now figure out what that was…

• Verifying mechanical, electrical, data and software interfaces

• Does it fit?
• Does it talk?
• Is it on?

Command & Data Handling, Firmware & Software, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

UNP Presentation on Command & Data Handling, Firmware & Software

Integrating Satellite-Based Precipitation Analysis: A Case Study In Norfolk, Virginia, Imiya M. Chathuranika, Dalya Ismael

Engineering Technology Faculty Publications

In many developing cities, the scarcity of adequate observed precipitation stations, due to constraints such as limited space, urban growth, and maintenance challenges, compromises data reliability. This study explores the use of satellite-based precipitation products (SbPPs) as a solution to supplement missing data over the long term, thereby enabling more accurate environmental analysis and decision-making. Specifically, the effectiveness of SbPPs in Norfolk, Virginia, is assessed by comparing them with observed precipitation data from Norfolk International Airport (NIA) using common bias adjustment methods. The study applies three different methods to correct biases caused by sensor limitations and calibration discrepancies and then …

An Operational Field Study: A Comparison Of Piloting Uncrewed Underwater Vehicles And Uncrewed Aircraft Systems, David Thirtyacre, Joseph Cerreta, Pete Miller, Kimberly Luthi, Jolee Thirtyacre

Publications

and operations, the ability to cross-train personnel in both Uncrewed Underwater Vehicles and Small Uncrewed Aircraft System operations has become a focal point for efficiency and workforce optimization. This study presents a comparative analysis of the operational and human factor considerations involved in piloting mini UUV and sUASs, highlighting the key similarities and differences in control methods, environmental influences, navigation, emergency procedures, and situational awareness. A qualitative experimental field study was conducted between July 2024 and October 2024, involving real-world deployments of both systems in maritime and aerial environments. Findings indicated that while UUV and sUAS operators relied on remote …

Production Box Cost Estimating Relationships For Dod Avionics, Carla J. Cisneros, Edward D. White, Brandon M. Lucas, Jonathan D. Ritschel, Robert D. Fass, Shawn M. Valentine

Faculty Publications

The authors use historical information obtained from the Cost Assessment Data Enterprise to estimate recurring production unit cost for DoD avionics via cost estimating relationships (CERs). The specific modeled responses include mean unit cost, median unit cost, and the 100th production unit cost (T100) utilizing learning curve theory. For T100, the authors adopt both a multiplicative and an additive error for CER comparison. Recommended CERs consist of the mean unit cost and the T100 utilizing a multiplicative error. Moreover, results reveal that weight has a significant effect on cost as well as a potential underaccounting of real price change or …

A Panel Data Regression Model For Defense Merger And Acquisition Activity, Corey D. Mack, Clay Koschnick, Michael Brown, Jonathan D. Ritschel, Brandon M. Lucas

Faculty Publications

Excerpt: This paper examines the relationship between a prime contractor's financial health and its mergers and acquisitions (M&A) spending in the defense industry. It aims to provide models that give the United States Department of Defense (DoD) indications of future M&A activity, informing decision-makers and contributing to ensuring competitive markets that benefit the consumer.

The results show a significant relationship between efficiency and M&A spending, indicating that companies with lower efficiency tend to spend more on M&As. However, there was no significant relationship between M&A spending and a company's profitability or solvency. These results were consistent with previous research and …

Ultrashort Pulsed Laser Treatment Is Effective At Sterilizing Metal Surfaces For Planetary Protection, Kaleb Mcquillan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

To prevent forward contamination from microbes aboard spacecraft intended for exploration of solar system bodies there is a need for effective sterilization methods. However, current techniques are both time-consuming and expensive. For example, dry heat sterilization requires removal from the assembly site and several days of treatment. Furthermore, some components such as optics and electronics are not compatible with current sterilization techniques. In this thesis, a novel femtosecond laser surface processing technique for the rapid sterilization of spacecraft hardware is reported. Femtosecond lasers produce extremely high photon fluxes (10²⁹ photons/s*cm², ~0.03 J/cm²) in extremely short …

An Integrated Space Test Lexicon: A Taxonomy For The Integrated Test And Evaluation Of Space Systems, Stephen K. Tullino, Andrew S. Keys, Robert A. Bettinger, Amy M. Cox, David R. Jacques

Faculty Publications

The proposed Integrated Space Test Lexicon is intended to amalgamate the numerous definitions of integrated (IT or IT&E), development test (DT or DT&E), and operational test (OT or OT&E) into unified, service-wide definitions, aligned with the Space Test Enterprise Vision. Refining such definitions will help distill the core characteristics of these fundamental test types to first identify space system activities composing what is traditionally known as DT and OT, then to provide a means of how these activities fit into the IT paradigm and support space system development. In forging a common understanding of how DT and OT support space …

Martian Atmospheric Rover Simulation (M.A.R.S.), Matt Berard, Shelby Beddard, Alexander Brunette, Emma Conti, Collin Duke, Delaney Novak, Keelin Weaver

Aerospace, Physics, and Space Science Student Publications

While rovers have been used by various agencies to explore Mars, their travel is limited by terrain obstacles, which may prevent mission completion. Creating a vehicle equipped with both driving and flight capabilities would allow greater range of motion on extraterrestrial planets. Integrating the technology for both transportation modes into one rover allows for efficiency and advancements in technological and planetary research.

Experimental Analysis Of The Integrated High-Lift Propulsor, Robert W. Deters, Byron Ward, Shreyas Narsipur

Publications

Wind tunnel testing was conducted to evaluate the performance of the Integrated High Lift Propulsor (IHLP), a novel Distributed Electric Propulsion (DEP) system. The IHLP integrates traditional Krueger flap/slat elements with a Distributed Electric Propulsion design, enhancing high lift performance and cruise efficiency compared to conventional pylon-mounted DEP configurations. Starting from a baseline configuration determined from pretest Computational Fluid Dynamics (CFD) analyses, a parametric study was performed to determine the influence on the aerodynamic characteristics (���� , ����, and ����). The study involved variations in flap settings, slat angles, overlap, propeller tilt, and propeller position. The impact of Reynolds number, …

Communicating The Need To Communicate - Lessons Learned From Failure Point To A Need For Systems Perspectives, Calvin J. Fong, Elizabeth Matranga, Dianne J. Deturris

College of Engineering Summer Undergraduate Research Program

Failure investigation reports indicate that a systems perspective is needed to reduce failure in aerospace missions.

The failures occurred not because of a technical problem but because not enough communication was occurring.

Mechanical Design And Fabrication Of Rotating Test Stand For Supersonic Wind Tunnel, Suren I. Sanai, Sam Groom, Peter Kim, Nandeesh Hiremath

College of Engineering Summer Undergraduate Research Program

This research project focuses on the design and manufacturing of a rotating test stand for the Cal Poly Supersonic Wind Tunnel (SSWT). In order to establish essential design parameters, the project employs compressible flow isentropic relationships to calculate the Mach number within the test section and determine static pressures. This comprehensive effort integrates preliminary design and manufacturing processes, utilizing CAD designs and a range of machinery for component fabrication, while also highlighting initial testing of the rotating test stand's ability to withstand predicted aerodynamic loads. As part of the research's future work, rigorous structural stability testing and the implementation of …

Development Of User Interface And Testing Harness, Jacob Amezquita, William Albertini

College of Engineering Summer Undergraduate Research Program

No abstract provided.

Utilizing The System Engineering Trade Study Analysis Method To Analyze Patient Aeromedical Evacuation, Sara Shaghaghi, Jeremy M. Slagley, Michael E. Miller, Gaiven Varshney

Faculty Publications

The US Air Force has gone through many aeromedical patient isolation transport system designs. The first designs were developed in response to the Ebola outbreak in 2014 and, more recently, the COVID-19 pandemic. The trade study analysis part of the system engineering design method was used to analyze the historic and current aeromedical patient contamination control transport systems. A trade study is a process that evaluates alternatives based upon various “-ilities”, such as reconfigurability, flexibility, durability, cost, and more, and performs a systematic analysis to aid designers in producing a ‘good’ design alternative given the large set of possible solutions. …

Strengthening Urban Resilience: Understanding The Interdependencies Of Outer Space And Strategic Planning For Sustainable Smart Environments, Ulpia-Elena Botezatu, Olga Bucovetchi, Adrian V. Gheorghe, Radu D. Stanciu

Engineering Management & Systems Engineering Faculty Publications

The conventional approach to urban planning has predominantly focused on horizontal dimensions, disregarding the potential risks originating from outer space. This paper aims to initiate a discourse on the vertical dimension of cities, which is influenced by outer space, as an essential element of strategic urban planning. Through an examination of a highly disruptive incident in outer space involving a collision between the Iridium 33 and Cosmos 2251 satellites, this article elucidates the intricate interdependencies between urban areas and outer space infrastructure and services. Leveraging the principles of critical infrastructure protection, which bridge the urban and outer space domains, and …

Critical Space Infrastructure: A Complex System Governance Perspective, Adrian V. Gheorghe, James C. Pyne, Joseph Sisti, Charles B. Keating, Polinpapilinho F. Katina, William Edmonson

Engineering Management & Systems Engineering Faculty Publications

This paper examines the applicability of Complex System Governance (CSG) to advance the Critical Space Infrastructure field (CSI). CSI encompasses space related hardware, workforce, environment, facilities, and businesses that are necessary for societal well-being. CSI is increasing in importance as more societal serving systems are becoming dependent on CSI to operate. Given this increasing dependence on CSI, societal sectors are increasingly at risk should something go wrong with CSI upon which they depend. CSI has been developing is a fragmented way and lacks coherent organization. CSG is focused on design, execution, and evolution of system functions that provide for communications, …

To The Moon: Strategic Competition In The Cislunar Region, Shawn M. Willis

Faculty Publications

China’s advancing space capabilities, particularly in the cislunar region, call for increased cislunar space domain awareness on the part of the United States. US military and civilian decisionmakers must take into account the full scope of China’s cislunar plans and capabilities as the military builds space strategies and future force designs. The United States must also increase near-term investments that support more robust cislunar space domain awareness.

Spacecraft Systems & Navigation, Christopher Vanacore

Student Works

This textbook is steered towards higher educational course entailed in Commercial Space Operations. This textbook will be covering in detail Orbital Satellites, and Spacecraft. These topics are discussed according to their application, design, and environment. The power system, shielding and communication systems are reviewed along with their missions, space, environment and limitations. Any vehicle, whether manned or unmanned, intended for space travel is a spacecraft. A spacecraft's required systems and equipment depend on the information it will acquire and the tasks it will perform. Although their levels of sophistication vary widely, they re all subject to the harsh conditions of …

Ground Support Equipment (Gse) Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

About this Presentation

• This presentation was developed as a “taste” of the area of GSE
• There are lots of resources that can be found about GSE and how it should be used
• While I have tried to cover a lot of ground in this presentation, the GSE required for your mission will vary depending on your application
• My intent is to start the thinking process of how to design, develop, and execute GSE elements of your program so that you have a successful mission

Smart Manufacturing—Theories, Methods, And Applications, Zhuming Bi, Lida Xu, Puren Ouyang

Information Technology & Decision Sciences Faculty Publications

(First paragraph) Smart manufacturing (SM) distinguishes itself from other system paradigms by introducing ‘smartness’ as a measure to a manufacturing system; however, researchers in different domains have different expectations of system smartness from their own perspectives. In this Special Issue (SI), SM refers to a system paradigm where digital technologies are deployed to enhance system smartness by (1) empowering physical resources in production, (2) utilizing virtual and dynamic assets over the internet to expand system capabilities, (3) supporting data-driven decision making at all domains and levels of businesses, or (4) reconfiguring systems to adapt changes and uncertainties in dynamic environments. …

Ground Station Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Ground Components

Two primary subsystems

•Ground Station(s)

•  May be your own or commercial
• Includes radio(s), antenna(s), rotor, etc.
• Heavily intertwined with satellite communications system
• Influences link budget

•Ground data system

• Your command, control, and telemetry interface
• Operator facing tools
• Front end processor
• Includes computer(s), networking equipment, displays, software tools, etc.
• Directly links to your ground station via network

•Additional ground subsystems could include:

• Payload ground (i.e. optical ground terminal)
• Space comm networks (i.e. Iridium)