Systems Engineering and Multidisciplinary Design Optimization Commons^™

Digital Twin–Oriented Certification Architecture For Advanced Air Mobility, Daniel Pleffken

International Journal of Aviation, Aeronautics, and Aerospace

Advanced Air Mobility (AAM) systems introduce certification challenges associated with distributed propulsion, increasing software reliance, and tightly coupled architectures. These characteristics evolve within regulatory environments that are still adapting to emerging vehicle concepts. While digital engineering practices are increasingly adopted during system development, certification workflows remain largely document-centric, limiting lifecycle traceability and consistent reasoning about change impacts as designs and regulatory interpretations evolve. This paper proposes a Digital Twin–oriented certification architecture that integrates regulatory knowledge, system representations, Means of Compliance (MoCs), and verification artifacts within a unified model-based environment. The architecture is organized around four elements: regulatory structuring, Model-Based Systems …

A Framework For Test Planning Of A Vision System Supporting Aerial Refueling, Jonathon K. Parry, Donald H. Costello, Michael D. M. Kutzer, Charles J. Doherty, Sarah M. Hubbard

Journal of Aviation Technology and Engineering

This essay presents a framework for evaluating a computer vision system providing perception for an uncrewed aircraft completing the automated air-to-air refueling (A3R) task. As the Department of Defense acquires capabilities that exhibit increasing levels of autonomy, the test and evaluation community must adapt the current framework to provide airworthiness officials the information required to accurately access the risks associated with the system underdoing testing. Following a brief introduction to A3R, this essay lays out a testing framework that leverages dendritic analysis and effectively deconstructs the critical issue into measurable data elements that can be used to support test and …

An Msbe–Driven Advanced Air Mobility Post–Disaster Response System, Olabode A. Olanipekun

Graduate Theses and Dissertations (2019 - present)

In this work, an overarching conceptual design model towards the realization of a proposed Advanced Air Mobility Post–Disaster Response System (AAMPDR system) was explored through the focal lenses of systems thinking (ST), socio–technical systems (STS) and model–based systems engineering (MBSE) paradigms. Initially aimed at providing intervention for casualties and aerial support to emergency rescue workers on the ground in the event of a hurricane disaster around the Gulf shore of the Mobile bay area, Mobile city, AL., the scope of this research subsequently expanded to include a global outlook. Thereafter, culminating in the development of a generalized AAMPDR system model …

An Operational Field Study: A Comparison Of Piloting Uncrewed Underwater Vehicles And Uncrewed Aircraft Systems, David Thirtyacre, Joseph Cerreta, Pete Miller, Kimberly Luthi, Jolee Thirtyacre

Publications

and operations, the ability to cross-train personnel in both Uncrewed Underwater Vehicles and Small Uncrewed Aircraft System operations has become a focal point for efficiency and workforce optimization. This study presents a comparative analysis of the operational and human factor considerations involved in piloting mini UUV and sUASs, highlighting the key similarities and differences in control methods, environmental influences, navigation, emergency procedures, and situational awareness. A qualitative experimental field study was conducted between July 2024 and October 2024, involving real-world deployments of both systems in maritime and aerial environments. Findings indicated that while UUV and sUAS operators relied on remote …

Design, Implementation, And Testing Of Spatial Disorientation Scenarios In A Modified Hexapod Motion Simulator, Jarod Hinckley, Ryan Paul, Logan Rock, Joe Conner, Jon M. Loffi

International Journal of Aviation, Aeronautics, and Aerospace

Abstract

Investigations into aviation accidents aim to identify root causes and enhance safety. Despite advancements in safety measures, technology, and education, general aviation accident rates remain stable, with loss of control identified as the leading cause. Spatial disorientation is a significant contributing factor in these incidents, accounting for approximately 10% of general aviation accidents—90% of which are fatal. Addressing spatial disorientation is increasingly critical with the emergence of Advanced Air Mobility (AAM) vehicles, a sector projected to reach a $30 billion market by 2030. While AAM is expected to transition toward full autonomy, human pilots will operate these vehicles during …

Going Airborne: Kent State's Pioneering Leap Into Integrated Advanced Air Mobility, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

This proposal centers on the development of a Concept of Operations in Advanced Air Mobility (AAM). Kent State University's College of Aeronautics and Engineering is poised to pioneer the integration of drones and electric Vertical Takeoff and Landing (eVTOL) systems, bridging the gap between its campus and airport by transporting students and faculty the 3NM distance from campus to the airport and back by a UAV. Beyond a standard research initiative, this proposal signifies a groundbreaking effort to reshape the landscape of educational aeronautics and Advanced Air Mobility and Urban Air Mobility. Our overarching goal is to transcend conventional boundaries …

Developing Systems Engineering And Machine Learning Frameworks For The Improvement Of Aviation Maintenance, Fatine Elakramine

Theses and Dissertations

This dissertation develops systems engineering and machine learning models for aviation maintenance support. With the constant increase in demand for air travel, aviation organizations compete to maintain airworthy aircraft to ensure the safety of passengers. Given the importance of aircraft safety, the aviation sector constantly needs technologies to enhance the maintenance experience, ensure system safety, and limit aircraft downtime. Based on the current literature, the aviation maintenance sector still relies on outdated technologies to maintain aircraft maintenance documentation, including paper-based technical orders. Aviation maintenance documentation contains a mixture of structured and unstructured technical text, mainly inputted by operators, making them …

Utilizing The System Engineering Trade Study Analysis Method To Analyze Patient Aeromedical Evacuation, Sara Shaghaghi, Jeremy M. Slagley, Michael E. Miller, Gaiven Varshney

Faculty Publications

The US Air Force has gone through many aeromedical patient isolation transport system designs. The first designs were developed in response to the Ebola outbreak in 2014 and, more recently, the COVID-19 pandemic. The trade study analysis part of the system engineering design method was used to analyze the historic and current aeromedical patient contamination control transport systems. A trade study is a process that evaluates alternatives based upon various “-ilities”, such as reconfigurability, flexibility, durability, cost, and more, and performs a systematic analysis to aid designers in producing a ‘good’ design alternative given the large set of possible solutions. …

Drone Cage Design And Implementation To Enable Small Drone Architecture Testing, Marco Fagetti, Emily M. Suh

Undergraduate Student Works

Geometric mechanics is a dynamical formalism that allows for simultaneous treatment of rotational and translational motion without the drawbacks of attitude parameterization sets. While geometric mechanics is well suited to deal with full six degree-of-freedom motion or significant position-attitude coupling, this formalism has yet to be extensively applied to hardware systems. The broader research goals of this work aim to prove the practical viability of this theoretical framework by applying it to a class of Crazyflie drones, which are frequently used to assess Guidance, Navigation, and Control schemes. To efficiently achieve these goals, a reliable, collapsible drone cage is required …

Conceptual Design Of Fuel Dumping System In Aircraft, Naveen M. Kumar Mr., Ravi A. Kannan Be., Magesh L Be., Praveen T. Kumar Be., Vijay K. Babu Me., Prashanth Radhakrishnan Be.

International Journal of Aviation, Aeronautics, and Aerospace

Airlines release the unburned jet fuel into the atmosphere to reduce the weight of aircraft before landing. Sometimes, aircraft reach a weight more than takeoff weight while departing from the airport. Therefore, the pilot follows the ATC comment to dump fuel into the atmosphere to reduce the aircraft's weight to avoid accidents. Due to fuel dumping, an airline faces fuel consumption, loss, and several diseases affect environmental pollutants, and living things. The total fuel consumption of commercial airlines worldwide in 2021 is 57 billion gallons. If jet fuel routinely hit the ground, it would pollute water and land and damage …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Incidence Of An Astronaut Not Sealing The Pressure Garment Visor On Reentry, Cameron M. Smith, Trent Tresch

Journal of Human Performance in Extreme Environments

Audiovisual records of a Project Mercury pilot’s activities during an orbital flight indicate that his visor was left open during reentry and descent to the sea surface, phases of flight during which cabin pressure loss was to be mitigated by suit pressurization; however, the suit could not have been pressurized with the visor open. Thus, for a presently unknown reason, a critical safety step—sealing the visor and making a pressure suit integrity test before reentry—was overlooked in this flight. Later, Space Shuttle flights were carried out with visors unsealed for much of the launch and landing phases, with the false …

The Application Of Signal Detection Theory Principles To Aircraft Certification, John M. Maris Ph.D, Alexander V. Ilyin Ph.D

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents the application of Signal Detection Theory (SDT) concepts to the certification of optional systems that provide operational or system safety benefits. The method and analysis yield quantitative requirements for the system performance that account for the risks and benefits of the potential system. This is in contrast to the standard certification approach which only focuses on Failure Conditions, and does not examine potential system benefits. A case study of an aircraft spotter on an electronic moving map illustrates that substantial safety improvements may be achieved even with the relatively low levels of software reliability associated with Commercial …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Landing-Gear Impact Response: A Non-Linear Finite Element Approach, Tuan H. Tran

UNF Graduate Theses and Dissertations

The primary objective of this research is to formulate a methodology of assessing the maximum impact loading condition that will incur onto an aircraft’s landing gear system via Finite Element Analysis (FEA) and appropriately determining its corresponding structural and impact responses to minimize potential design failures during hard landing (abnormal impact) and shock absorption testing. Both static and dynamic loading condition were closely analyzed, compared, and derived through the Federal Aviation Administration’s (FAA) airworthiness regulations and empirical testing data.

In this research, a nonlinear transient dynamic analysis is developed and established via NASTRAN advanced nonlinear finite element model (FEM) to …

Determination Of Takeoff And Landing Distances Using An Ipad Performance Application For The Diamond Da40, Tyler A. Babb, Christina Hiers

International Journal of Aviation, Aeronautics, and Aerospace

All pilots are required to calculate aircraft performance parameters prior to flight. This includes takeoff and landing distances. Traditionally, pilots in training have planned for takeoff and landing performance using paper charts provided by the manufacturer. However, professional pilots use devices such as Flight Management Systems (FMS), Electronic Flight Bag (EFB) applications, or on-board performance computers (OPC) to make such calculations. During primary flight training, student pilots could make performance calculations with proper software, similar to the method they will typically use at the professional level. Recently an iPad application was released which can calculate numerous performance parameters for specific …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Standardization Of Human-Computer-Interface For Geo-Fencing In Small Unmanned Aircraft Systems, David Thirtyacre, Robert Brents, Michael Goldfein, David Hunter, B. Terwilliger

Publications

The use of small unmanned aircraft systems (sUAS) has increased significantly in the past year. Geographic fencing (geo-fencing) is software built into most medium-cost consumer sUAS. This software is typically used to limit the altitude above launch point, the flight distance from the transmitting controller, and/or restrict flight inside a no-fly zone. While the concept of a geo-fence is simplistic, the human-computer-interface (HCI) varies drastically among platforms, and even between software iterations on the same platform. This research examines the HCI of three popular consumer-level sUAS with regard to geo-fencing. The software procedures and human interface for the DJI Inspire-1, …

A Technology Survey Of Emergency Recovery And Flight Termination Systems For Uas, Richard Stansbury, Wesley Tanis, Timothy Wilson

Publications

For safe flight in the National Airspace System (NAS), either under the current interim rules or under anticipated longer-term regulatory guidelines facilitating unmanned aircraft system (UAS) access to the NAS, the UAS must incorporate technologies and flight procedures to ensure that neither people nor property in the air, on the ground, or on or in the water are endangered by the failure of an onboard component, by inappropriate unmanned aircraft (UA) response to pilot commands, or by inadvertent entry by the UA into prohibited airspace. The aircraft must be equipped with emergency recovery (ER) procedures and technologies that ensure that …