Systems Engineering and Multidisciplinary Design Optimization Commons^™

An Operational Field Study: A Comparison Of Piloting Uncrewed Underwater Vehicles And Uncrewed Aircraft Systems, David Thirtyacre, Joseph Cerreta, Pete Miller, Kimberly Luthi, Jolee Thirtyacre

Publications

and operations, the ability to cross-train personnel in both Uncrewed Underwater Vehicles and Small Uncrewed Aircraft System operations has become a focal point for efficiency and workforce optimization. This study presents a comparative analysis of the operational and human factor considerations involved in piloting mini UUV and sUASs, highlighting the key similarities and differences in control methods, environmental influences, navigation, emergency procedures, and situational awareness. A qualitative experimental field study was conducted between July 2024 and October 2024, involving real-world deployments of both systems in maritime and aerial environments. Findings indicated that while UUV and sUAS operators relied on remote …

Standardization Of Risk Classifications For Unmanned Space Vehicle Missions, Collin A. Gwaltney

Theses and Dissertations

This paper seeks to model risk classification levels (A-D) for 122 Space Vehicle programs. Models include multinomial logistic regression as well as random forest, a machine learning technique based on decision trees. We use independent variables (IVs) which are theoretically correlated to risk class for the regression and one random forest model. We then include all IVs and allow the random forest technique to use those which provide the most information on risk class before paring down the number of IVs to only 7. We show that the accuracy of predictions increases from 62% to 87% by using random forest …

Going Airborne: Kent State's Pioneering Leap Into Integrated Advanced Air Mobility, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

This proposal centers on the development of a Concept of Operations in Advanced Air Mobility (AAM). Kent State University's College of Aeronautics and Engineering is poised to pioneer the integration of drones and electric Vertical Takeoff and Landing (eVTOL) systems, bridging the gap between its campus and airport by transporting students and faculty the 3NM distance from campus to the airport and back by a UAV. Beyond a standard research initiative, this proposal signifies a groundbreaking effort to reshape the landscape of educational aeronautics and Advanced Air Mobility and Urban Air Mobility. Our overarching goal is to transcend conventional boundaries …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Utilizing The System Engineering Trade Study Analysis Method To Analyze Patient Aeromedical Evacuation, Sara Shaghaghi, Jeremy M. Slagley, Michael E. Miller, Gaiven Varshney

Faculty Publications

The US Air Force has gone through many aeromedical patient isolation transport system designs. The first designs were developed in response to the Ebola outbreak in 2014 and, more recently, the COVID-19 pandemic. The trade study analysis part of the system engineering design method was used to analyze the historic and current aeromedical patient contamination control transport systems. A trade study is a process that evaluates alternatives based upon various “-ilities”, such as reconfigurability, flexibility, durability, cost, and more, and performs a systematic analysis to aid designers in producing a ‘good’ design alternative given the large set of possible solutions. …

Co2 Based Parachute Deployment, Anthony M. S. Settlemier, Nicholas Motter

Williams Honors College, Honors Research Projects

This paper describes the design process of a CO2 based parachute deployment system for the Akronauts Rocket Design team, with particular emphasis on the selection of methodologies of deployment as well as design iteration. The objective was to create a fully mechanical system in order to replace the black powder based systems that were used previously by the team.

Emphasis was put in creating a system that would function well at higher altitudes while also preventing damage to the parachute during deployment. This system emphasizes robustness under launch conditions.

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Design And Test Of An Autonomy Monitoring Service To Detect Divergent Behaviors On Unmanned Aerial Systems, Loay Y. Almannaei

Theses and Dissertations

Operation of Unmanned Aerial Vehicles (UAV) support many critical missions in the United State Air Force (USAF). Monitoring abnormal behavior is one of many responsibilities of the operator during a mission. Some behaviors are hard to be detect by an operator, especially when flying one or more autonomous vehicles; as such, detections require a high level of attention and focus to flight parameters. In this research, a monitoring system and its algorithm are designed and tested for a target fixed-wing UAV. The Autonomy Monitoring Service (AMS) compares the real vehicle or simulated Vehicle with a similar simulated vehicle using Software …

Landing-Gear Impact Response: A Non-Linear Finite Element Approach, Tuan H. Tran

UNF Graduate Theses and Dissertations

The primary objective of this research is to formulate a methodology of assessing the maximum impact loading condition that will incur onto an aircraft’s landing gear system via Finite Element Analysis (FEA) and appropriately determining its corresponding structural and impact responses to minimize potential design failures during hard landing (abnormal impact) and shock absorption testing. Both static and dynamic loading condition were closely analyzed, compared, and derived through the Federal Aviation Administration’s (FAA) airworthiness regulations and empirical testing data.

In this research, a nonlinear transient dynamic analysis is developed and established via NASTRAN advanced nonlinear finite element model (FEM) to …

Subjectivity In Failure Mode Effects Analysis (Fmea) Severity Classification Within A Reliability Centered Maintenance (Rcm) Context, Marc Banghart, Kari Babski-Reeves, Linkan Bian, Lesley Strawderman

International Journal of Aviation, Aeronautics, and Aerospace

This research paper investigated subjectivity in the severity rating of failure modes within a risk analysis process. Although several risk analysis processes can be utilized, the study considered the application of Failure Modes Effects Analysis (FMEA) or Failure Modes Effects and Criticality Analysis (FMECA) due to its common use within the Aerospace Industry. The study investigated both differences in severity selection given varying amounts of experience as well as any association between severity selection and the provided input information. The main goal of the research was to investigate the impact of data quality on severity selection and to identify factors …

Development Of Safety Standards For Cubesat Propulsion Systems, Liam Jon Cheney

Master's Theses

The CubeSat community has begun to develop and implement propulsion systems. This movement represents a new capability which may satisfy mission needs such as orbital and constellation maintenance, formation flight, de-orbit, and even interplanetary travel. With the freedom and capability granted by propulsion systems, CubeSat providers must accept new responsibilities in proportion to the potential hazards that propulsion systems may present.

The Cal Poly CubeSat program publishes and maintains the CubeSat Design Specification (CDS). They wish to help the CubeSat community to safety and responsibly expand its capabilities to include propulsive designs. For this reason, the author embarked on the …

An Integrated Risk Analysis Methodology In A Multidisciplinary Design Environment, Katrina R. Hampton

Engineering Management & Systems Engineering Theses & Dissertations

Design of complex, one-of-a-kind systems, such as space transportation systems, is characterized by high uncertainty and, consequently, high risk. It is necessary to account for these uncertainties in the design process to produce systems that are more reliable. Systems designed by including uncertainties and managing them, as well, are more robust and less prone to poor operations as a result of parameter variability.

The quantification, analysis and mitigation of uncertainties are challenging tasks as many systems lack historical data. In such an environment, risk or uncertainty quantification becomes subjective because input data is based on professional judgment. Additionally, there are …

A Systems Engineering Approach To Environmental Risk Management: A Case Study Of Depleted Uranium At Test Area C-64, Eglin Air Force Base, Florida, Charles M. Carter, Kristina M. Fortmann, Stephen W. Hill, Robert M. Latin, Edward J. Masterson, Joseph A. Roh, Sujay R. Setlur

Theses and Dissertations

Environmental restoration is an area of concern in an environmentally conscious world. Much effort is required to clean up the environment and promote environmentally sound methods for managing current land use. In light of the public consciousness with the latter topic, the United States Air Force must also take an active role in addressing these environmental issues with respect to current and future USAF base land use. This thesis uses the systems engineering technique to assess human health risks and to evaluate risk management options with respect to depleted uranium contamination in the sampled region of Test Area (TA) C-64 …