Systems Engineering and Multidisciplinary Design Optimization Commons^™

Specifying Space Defense Operator Interfaces Through The Application Of Cognitive Systems Engineering And Prototyping, Justin E. Oryschak

Theses and Dissertations

The Department of Defense needs better tools to support its operators as they strive to defend its space assets. The growing sophistication of anti-satellite weapons increasingly challenges the nation’s orbital communications and surveillance infrastructure. Operators face difficulties gathering useful information and dealing with the complexity of potential enemy actions. This research applied cognitive systems engineering and ecological interface design (EID) methodologies to create a prototype space mission management tool that enhances operator situation awareness and decision-making ability. Applied cognitive task analysis interviews were used to document space operator decision-making in their domain. Model-based systems engineering was applied to integrate work …

Model Based Systems Engineering For A Venture Class Launch Facility, Walter Mcgee Taraila

Mechanical & Aerospace Engineering Theses & Dissertations

A study of Model-Based Systems Engineering (MBSE) applied to a small-lift launch facility is presented. The research uses Systems Modeling Language (SysML) products and functional diagrams to document the structure, controls, electrical power, hydraulic, safety mechanisms, software, and fluid ground systems on a launch pad. The research is motivated by the need to design complex systems with an unambiguous understanding that improves communication, quality, productivity, and reduces risk. A model is developed following the ISO/IEC-15288 technical process framework. The stakeholder requirements are defined and analyzed to provide traceability to individual systems and subsystems. An architectural design is realized and implemented …

Study Of Control Schemes For Series Hybrid-Electric Powertrain For Unmanned Aerial Systems, Darren A. Dehesa Jr

LSU Master's Theses

Hybrid-Electric aircraft powertrain modeling for Unmanned Aerial Systems (UAS) is a useful tool for predicting powertrain performance of the UAS aircraft. However, for small UAS, potential gains in range and endurance can depend significantly on the aircraft flight profile and powertrain control logic in addition to the subsequent impact on the performance of powertrain components. Small UAS aircraft utilize small-displacement engines with poor thermal efficiency and, therefore, could benefit from a hybridized powertrain by reducing fuel consumption. This study uses a dynamic simulation of a UAS, representative flight profiles, and powertrain control logic approaches to evaluate the performance of a …

Finite-Time State Estimation For An Inverted Pendulum Under Input-Multiplicative Uncertainty, Sergey V. Drakunov, William Mackunis, Anu Kossery Jayaprakash, Krishna Bhavithavya Kidambi, Mahmut Reyhanoglu

Publications

A sliding mode observer is presented, which is rigorously proven to achieve finite-time state estimation of a dual-parallel underactuated (i.e., single-input multi-output) cart inverted pendulum system in the presence of parametric uncertainty. A salient feature of the proposed sliding mode observer design is that a rigorous analysis is provided, which proves finite-time estimation of the complete system state in the presence of input-multiplicative parametric uncertainty. The performance of the proposed observer design is demonstrated through numerical case studies using both sliding mode control (SMC)- and linear quadratic regulator (LQR)-based closed-loop control systems. The main contribution presented here is the rigorous …

Pathfinding Interplanetary Bus Capability For The Cal Poly Cubesat Laboratory Through The Development Of A Phobos-Deimos Mission Concept, Alyssa M. Ralph

Master's Theses

With the rise of CubeSats and the demonstration of their many space applications, there is interest in interplanetary CubeSats to act for example as scientific investigations or communications relays. In line with the increasing demand for this class of small satellites, the Cal Poly CubeSat Lab (CPCL) seeks to develop a bus that could support an interplanetary science payload. To facilitate this, a mission concept to conduct science of the moons of Mars, Phobos and Deimos, is investigated by determining the mission needs for a CubeSat in a Phobos-Deimos cycler orbit through the development of a baseline design to meet …

Pocket Rocket: A 1u+ Propulsion System Design To Enhance Cubesat Capabilities, James M. Harper

Master's Theses

The research presented provides an overview of a 1U+ form factor propulsion system design developed for the Cal Poly CubeSat Laboratory (CPCL). This design utilizes a Radiofrequency Electrothermal Thruster (RFET) called Pocket Rocket that can generate 9.30 m/s of delta-V with argon, and 20.2 ± 3 m/s of delta-V with xenon. Due to the demand for advanced mission capabilities in the CubeSat form factor, a need for micro-propulsion systems that can generate between 1 – 1500 m/s of delta-V are necessary.

By 2019, Pocket Rocket had been developed to a Technology Readiness Level (TRL) of 5 and ground tested in …

Design And Test Of An Autonomy Monitoring Service To Detect Divergent Behaviors On Unmanned Aerial Systems, Loay Y. Almannaei

Theses and Dissertations

Operation of Unmanned Aerial Vehicles (UAV) support many critical missions in the United State Air Force (USAF). Monitoring abnormal behavior is one of many responsibilities of the operator during a mission. Some behaviors are hard to be detect by an operator, especially when flying one or more autonomous vehicles; as such, detections require a high level of attention and focus to flight parameters. In this research, a monitoring system and its algorithm are designed and tested for a target fixed-wing UAV. The Autonomy Monitoring Service (AMS) compares the real vehicle or simulated Vehicle with a similar simulated vehicle using Software …

Application Of Mounting Personal Pid Voc Sensors To Small Unmanned Aircraft Systems To Aid First Responders, Cheri Marcham

Publications

Small Unmanned Aerial Systems in Emergency Response

• Current sUAS Uses
• Search and rescue
• Thermal imaging
• Evaluating structural stability
• Spread of wildfires
• Storm damage

Work-In-Progress: Augmented Reality System For Vehicle Health Diagnostics And Maintenance, Yuzhong Shen, Anthony W. Dean, Rafael Landaeta

Electrical & Computer Engineering Faculty Publications

This paper discusses undergraduate research to develop an augmented reality (AR) system for diagnostics and maintenance of the Joint Light Tactical Vehicle (JLTV) employed by U.S. Army and U.S. Marine Corps. The JLTV’s diagnostic information will be accessed by attaching a Bluetooth adaptor (Ford Reference Vehicle Interface) to JLTV’s On-board diagnostics (OBD) system. The proposed AR system will be developed for mobile devices (Android and iOS tablets and phones) and it communicates with the JLTV’s OBD via Bluetooth. The AR application will contain a simplistic user interface that reads diagnostic data from the JLTV, shows vehicle sensors, and allows users …

Three Axis Attitude Control System Design And Analysis Tool Development For The Cal Poly Cubesat Laboratory, Liam T. Bruno

Master's Theses

The Cal Poly CubeSat Laboratory (CPCL) is currently facing unprecedented engineering challenges—both technically and programmatically—due to the increasing cost and complexity of CubeSat flight missions. In responding to recent RFPs, the CPCL has been forced to find commercially available solutions to entire mission critical spacecraft subsystems such as propulsion and attitude determination & control, because currently no in-house options exist for consideration. The commercially available solutions for these subsystems are often extremely expensive and sometimes provide excessively good performance with respect to mission requirements. Furthermore, use of entire commercial subsystems detracts from the hands-on learning objectives of the CPCL by …

Design Of A Martian Communication Constellation Of Cubesats, Scott J. Pirkle

Master's Theses

Spacecraft operating on the Martian surface have used relay satellites as a means of improving communication capabilities, mainly in terms of bandwidth and availability. However, the spacecraft used to achieve this have been large spacecraft (1000s of kilograms) and were not designed with relay capability as the design priority. This thesis explores the possibility of using a CubeSat-based constellation as a communications network for spacecraft operating on the Martian surface. Brute-force techniques are employed to explore the design space of possible constellations. An analysis of constellation configurations that provide complete, continuous coverage of the Martian surface is presented. The stability …

Conceptual Design Of A South Pole Carrier Pigeon Uav, Kendrick M. Dlima

Master's Theses

Currently, the South Pole has a large data problem. It is estimated that 1.2 TB of data is being produced every day, but less than 500 GB of that data is being uploaded via aging satellites to researchers in other parts of the world. This requires those at the South Pole to analyze the data and carefully select the parts to send, possibly missing out on vital scientific information. The South Pole Carrier Pigeon will look to bridge this data gap.

The Carrier Pigeon will be a small unmanned aerial vehicle that will carry a 30 TB solid-state hard drive …

Design, Validation, And Verification Of The Cal Poly Educational Cubesat Kit Structure, Nicholas B. Snyder

Master's Theses

In this thesis, the development of a structure for use in an educational CubeSat kit is explored. The potential uses of this kit include augmenting existing curricula with aspects of hands on learning, developing new ways of training students on proper space systems engineering practices, and overall contributing to academic capacity building at Cal Poly and its collaborators. The design improves on existing CubeSat kit structures by increasing accessibility to internal components by implementing a modular backplane system, as well as adding the ability to be environmentally tested. Manufacturing of the structure is completed with both additive (Fused Deposition Modeling …

Nonlinear Least Squares 3-D Geolocation Solutions Using Time Differences Of Arrival, Michael V. Bredemann

Mathematics & Statistics ETDs

This thesis uses a geometric approach to derive and solve nonlinear least squares minimization problems to geolocate a signal source in three dimensions using time differences of arrival at multiple sensor locations. There is no restriction on the maximum number of sensors used. Residual errors reach the numerical limits of machine precision. Symmetric sensor orientations are found that prevent closed form solutions of source locations lying within the null space. Maximum uncertainties in relative sensor positions and time difference of arrivals, required to locate a source within a maximum specified error, are found from these results. Examples illustrate potential requirements …

Arizona Hyperloop: The Fifth Mode Of Transportation, Eleanor Pahl, Matthieu Rada

Discovery Day - Prescott

Arizona Hyperloop is a coalition between Embry-Riddle Aeronautical University and Arizona State University students competing in Elon Musk’s annual SpaceX Hyperloop Pod Competition. Hyperloop is the proposed “Fifth Mode of Transportation” - coined “a cross between a Concorde, a rail gun, and an air hockey table.” A hyperloop pod levitates and travels at nearly the speed of sound inside a vacuum tube, which eliminates air resistance. Musk hosts the annual competition to university students to encourage the evolution of urban transportation. The goal is to design, build, and race the fastest prototype pod at SpaceX’s mile-long test track in Hawthorne, …

Sae Aero West Heavy Lift Competition Team - Eaglenautics, Anthony Pirone, Evan Stuart, Jessica Millard, Nathaniel Scott

Discovery Day - Prescott

ERAU’s SAE Aero Design West Competition team encourages students of all majors who have an interest in the design of heavy-lift cargo and passenger aircraft to design, build, and fly a large RC aircraft to meet a new set of regulations each competition year. Since the team, Eaglenautics, was founded in 2017 it has successfully been to competition once in April 2019 in California. The team’s aircraft flew 4 out of 5 flight rounds, passed all technical inspections, and is now on display in ERAU’s Aero-Fab in the AXFAB. The 2020 competition requirements are unique in that the cargo’s weight-to-volume …

An Argument Against Satellite Resiliency: Simplicity In The Face Of Modern Satellite Design, Dax Linville, Robert A. Bettinger

Faculty Publications

The US Air Force and the wider US government rely heavily on space-based capabilities in various orbital regimes to project national security and sovereignty. However, these capabilities are enabled by the design, launch, and operation of satellites produced with a design methodology that favors large, monolithic, and technologically exquisite space systems. Despite the ability for these satellites to provide enduring and resilient capabilities, they suffer from a woefully long acquisition process that debilitates any prospect of rapid satellite reconstitution in the event of a space war.

Student Learning And Retention Using A Flight Training Device: A Case Study, Adeel Khalid

National Training Aircraft Symposium (NTAS)

Student learning and retention as a function of the mode of teaching is analyzed in this study. Different groups of students receive information about aircraft flight operations either via lecture, through directed study, a combination of the two or through a pre-recorded flight demonstration video. Their level of learning is assessed by evaluating how well they fly an aircraft and perform a predefined mission using a flight simulator. Scores of different groups are compared qualitatively and quantitatively and students are surveyed after the flight. It is hypothesized that students that learn through watching a demonstration video and have the ability …

A Reference Architecture For Cubesat Development, Luke J. Farrell

Theses and Dissertations

Developing a space vehicle is a complex and detailed process, and while CubeSats are smaller and more accessible than traditional satellites the design process is relatively unchanged. Creating a viable space vehicle design requires detailed analysis of a set of mission needs in order to define the mission, with this need set used to then create the specific mission requirements. These requirements are used to formulate a concept of operations, and then move into developing a physical system for executing the mission. The successful production of CubeSats within an organization is contingent upon the accurate execution of the general CubeSat …

The Impact Of Changing The Size Of Aircraft Radar Displays On Visual Search In The Cockpit, Justin R. Marsh

Theses and Dissertations

Advances in sensor technology have enabled our fighter aircraft to find, fix, track, target, engage (F2T2E) at greater distances, providing the operator with more data within the battlefield. Modern aircraft are designed with larger displays while our legacy aircraft are being retrofitted with larger cockpit displays to enable display of the increased data. While this modification has been shown to enable improvements in human performance of many cockpit tasks, this effect is often not measured nor fully understood at a more generalizable level. This research outlines an approach to comparing human performance across two display sizes in future F-16 cockpits. …

Development, Test And Evaluation Of Autonomous Unmanned Aerial Systems In A Simulated Wide Area Search Scenario: An Implementation Of The Autonomous Systems Reference Architecture, Katherine E. Cheney, David D. King

Theses and Dissertations

The implementation and testing of autonomous and cooperative unmanned systems is challenging due to the inherent design complexity, infinite test spaces, and lack of autonomy specific measures. These challenges are limiting the USAF's ability to deploy and take advantage of tactical and strategic advantages offered by these systems. This research instantiates an Autonomous System Reference Architecture (ASRA) on a Wide Area Search (WAS) scenario as a test bed for rapid prototyping and evaluation of autonomous and cooperative systems. This research aims to pro- vide a framework to evaluate the system’s ability to achieve mission and autonomy objectives, develop reusable autonomous …

A System Architecture For Phased Development Of Remote Suas Operation, Eric Ashley

Master's Theses

Current airspace regulations require the remote pilot-in-command of an unmanned aircraft systems (UAS) to maintain visual line of sight with the vehicle for situational awareness. The future of UAS will not have these constraints as technology improves and regulations are changed. An operational model for the future of UAS is proposed where a remote operator will monitor remote vehicles with the capability to intervene if needed. One challenge facing this future operational concept is the ability for a flight data system to effectively communicate flight status to the remote operator. A system architecture has been developed to facilitate the implementation …

Design Of Banner Tow Mechanism For Bush Plane, Kyle Ciarrone, Ivan Martin, Rishabh Gadi, Tyler Brandt

Williams Honors College, Honors Research Projects

The 2019-2020 AIAA DBF objective was to design, build, and test a banner-towing bush plane that carries wooden passengers and luggage. Senior members on the team undertook the creation of the banner tow mechanism subsystem as their senior design project on behalf of the design team due to the challenge of its mechanical design and the aerodynamic considerations regarding its placement and enclosure aboard the aircraft. The competition as well as access to campus resources were canceled due to COVID-19, so full testing and integration of the mechanism was not achieved. However, the engineering design process was experienced from the …

The Use Of Polyvinyldene Fluoride (Pvdf) Films For Pressure Measurement, Patrick Smith

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Atv Dynamics And Pediatric Rider Safety, James T. Auxier Ii

Theses and Dissertations--Biomedical Engineering

It has been observed through numerous academic and governmental agency studies that pediatric all-terrain vehicle ridership carries significant risk of injury and death. While no doubt valuable to safety, the post-hoc approach employed in these studies does little to explain the why and how behind the risk factors. Furthermore, there has been no prolonged, widespread, organized, and concerted effort to reconstruct and catalog the details and causes of the large (20,000+) number of ATV-related injuries that occur each year as has been done for road-based motor vehicle accidents. This dissertation takes the opposite approach from a meta-analysis and instead examines …

Toward Adjoint-Based Aeroacoustic Optimization For Propeller And Rotorcraft Applications, Ramiz Ö. Içke, Oktay Baysal, Andy Moy, Leonard V. Lopes, Beckett Zhou, Boris Diskin

Mechanical & Aerospace Engineering Faculty Publications

The goal of the present project is to build a multidisciplinary, rapid, robust, and accurate computational tool to optimize wing-mounted propeller designs. The full Farassat’s formulation F1A for aeroacoustic analysis is implemented in the open-source software SU2. This extension enables the prediction of far-field noise generated by moving sources. The formulation is verified, for a stationary and rotating sphere in a wind tunnel and for a tiltrotor in forward flight, by comparing the acoustic predictions of SU2 with the predictions computed by NASA’s aeroacoustics code ANOPP2. The algorithmic differentiation capability of SU2 provides discretely consistent, adjoint-based sensitivity analysis for this …

Developing A Uas-Deployable Methane Sensor Using Low-Cost Modular Open-Source Components, Gavin Demali

Williams Honors College, Honors Research Projects

This project aimed to develop a methane sensor for deployment on an unmanned aerial system (UAS), or drone, platform. This design is centered around low cost, commercially available modular hardware components and open source software libraries. Once successfully developed, this system was deployed at the Bath Nature Preserve in Bath Township, Summit County Ohio in order to detect any potential on site fugitive methane emissions in the vicinity of the oil and gas infrastructure present. The deliverables of this project (i.e. the data collected at BNP) will be given to the land managers there to better inform future management and …

Configuration Management Challenges Of Model Based Systems Engineering On Multiple Variant Aircraft Fleets, David R. Zubowski

Journal of Aviation/Aerospace Education & Research

Naval Air Systems Command (NAVAIR) is moving from traditional Systems Engineering (SE), focusing on managing documentation, to Model Based Systems Engineering (MBSE), focusing on a system model (All Partners Access Network, n.d.). As NAVAIR transitions to an MBSE standard, controlling the Configuration Management (CM) of a fleet of a single series of aircraft in varying states of engineering change incorporations will be critical. Traditional systems engineering and configuration management are both text document focused disciplines that have existed since the end of World War II. The method chosen to conduct the research was by performing a case study on MBSE …

A B-Spline-Based Generative Adversarial Network Model For Fast Interactive Airfoil Aerodynamic Optimization, Xiaosong Du, Ping He, Joaquim R.R.A. Martins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Airfoil aerodynamic optimization is of great importance in aircraft design; however, it relies on high-fidelity physics-based models that are computationally expensive to evaluate. In this work, we provide a methodology to reduce the computational cost for airfoil aerodynamic optimization. Firstly, we develop a B-spline based generative adversarial networks (BSplineGAN) parameterization method to automatically infer design space with sufficient shape variability. Secondly, we construct multi-layer neural network (MNN) surrogates for fast predictions on aerodynamic drag, lift, and pitching moment coefficients. The BSplineGAN has a relative error lower than 1% when fitting to UIUC database. Verification of MNN surrogates shows the root …

Applications Of Polynomial Chaos-Based Cokriging To Aerodynamic Design Optimization Benchmark Problems, Jethro Nagawkar, Leifur Leifsson, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this work, the polynomial chaos-based Cokriging (PC-Cokriging) is applied to a benchmark aerodynamic design optimization problem. The aim is to perform fast design optimization using this multifidelity metamodel. Multifidelity metamodels use information at multiple levels of fidelity to make accurate and fast predictions. Higher amount of lower fidelity data can provide important information on the trends to a limited amount of high-fidelity (HF) data. The PC-Cokriging metamodel is a multivariate version of the polynomial chaos-based Kriging (PC-Kriging) metamodel and its construction is similar to Cokriging. It combines the advantages of the interpolation-based Kriging metamodel and the regression-based polynomial chaos …