Systems Engineering and Multidisciplinary Design Optimization Commons^™

System Integration And Validation Of The Cal Poly Spacecraft Attitude Dynamics Simulator Mk. Iv, Bricen S. Rigby

Master's Theses

The Cal Poly Spacecraft Attitude Dynamics Simulator (SADS) is an ongoing project that seeks to enable the simulation and validation of sensors, actuators, and control logic related to spacecraft attitude control. The SADS platform rests atop a spher- ical air-bearing device which allows for nearly frictionless rotation in all three axes. The orientation of the platform is controlled by four reaction wheels arranged in a pyramidal configuration. Over the past few years, there have been significant updates to the reaction wheel subsystem, as well as requests for a more capable central com- puter. Therefore, a new system architecture for the …

Orbital Maneuvers And Interplanetary Trajectory Design Via Reinforcement Learning, Roberto Cuéllar Rangel

Doctoral Dissertations and Master's Theses

This dissertation investigates the application of reinforcement learning (RL) to the design and optimization of low-thrust spacecraft trajectories, with an emphasis on autonomy, adaptability, and robustness in the presence of system uncertainties and unmodeled perturbations. Classical approaches to low-thrust trajectory design are predominantly grounded in optimal control theory, which relies on the availability of precise dynamical models and often requires problem-specific reformulation and solver tuning. While optimal control methods offer high accuracy under deterministic conditions, their sensitivity to stochastic disturbances and computational limitations in highly nonlinear or uncertain environments pose significant challenges for future autonomous space missions.

To address these …

Theory And Algorithms To Learn, Propagate, And Exploit Uncertainty For Stochastic Optimal Control Of Dynamical Systems, Vignesh Sivaramakrishnan

Electrical and Computer Engineering ETDs

Non-Gaussian uncertainty frequently arises in learning and control problems involving stochastic dynamical systems, particularly in autonomous vehicles, UAVs, satellites, and robotics. In this dissertation, we propose a new framework that leverages characteristic functions that provides a frequency-domain representation of random variables. The dissertation is structured into three key areas. First, we address model-based stochastic optimal control for linear systems with non-Gaussian noise, demonstrating that characteristic functions can be used to enforce chance constraints and control systems toward desired distributions. Second, we explore data-driven stochastic control, utilizing empirical characteristic functions to handle systems with unknown disturbances. In addition, we derive several …

External Runtime Execution Monitoring Of A Cyber Physical System Via Trace Interfaces, Peter Vaughan Truslow

Theses and Dissertations

In the past two decades, Unmanned Aerial Systems have progressed from expensive military hardware or one-off custom builds, to include off-the-shelf drones that can be purchased for a rather affordable price and flown by nearly anyone. As the technology and performance have improved, the door is opened to applications that require operation in environments where the consequences for failure are high, such as operating in the navigable airspace or in urban environments, or with human passengers. This requires a great deal of trust in the reliability and integrity of the control systems of the aircraft. A method of monitoring the …

Crazyflie 2.1 Quadcopter Nonlinear System Identification, Nhat V. Nguyen, Hope Storro, John Plimpton

2023 Symposium

Quadcopters (quad) are used widely in many industries with crucial applications such as infrastructure inspection or package delivery. The Crazyflie 2.1 quad from Bitcraze provides an excellent platform for research and development. In this project, our goal is to perform system identification on the Crazyflie to propose a complete model. A gray box method is explored, which includes leveraging the parameters that are already known, to develop a set of equations. Through theory, simulations, and measurements, a complete quadcopter model is developed.

On-Board Artificial Intelligence For Failure Detection And Safe Trajectory Generation, Eduardo Morillo

Doctoral Dissertations and Master's Theses

The use of autonomous flight vehicles has recently increased due to their versatility and capability of carrying out different type of missions in a wide range of flight conditions. Adequate commanded trajectory generation and modification, as well as high-performance trajectory tracking control laws have been an essential focus of researchers given that integration into the National Air Space (NAS) is becoming a primary need. However, the operational safety of these systems can be easily affected if abnormal flight conditions are present, thereby compromising the nominal bounds of design of the system's flight envelop and trajectory following. This thesis focuses on …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Developing A Uas-Deployable Methane Sensor Using Low-Cost Modular Open-Source Components, Gavin Demali

Williams Honors College, Honors Research Projects

This project aimed to develop a methane sensor for deployment on an unmanned aerial system (UAS), or drone, platform. This design is centered around low cost, commercially available modular hardware components and open source software libraries. Once successfully developed, this system was deployed at the Bath Nature Preserve in Bath Township, Summit County Ohio in order to detect any potential on site fugitive methane emissions in the vicinity of the oil and gas infrastructure present. The deliverables of this project (i.e. the data collected at BNP) will be given to the land managers there to better inform future management and …

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun

LSU New Orleans Theses and Dissertations

In this work, the data analysis of oscillating flapping fins is conducted for mathematical model. Data points of heave and surge force obtained by the CFD (Computational Fluid Dynamics) for different geometrical kinds of flapping fins. The fin undergoes a combination of vertical and angular oscillatory motion, while travelling at constant forward speed. The surge thrust and heave lift are generated by the combined motion of the flapping fins, especially due to the carrier vehicle’s heave and pitch motion will be investigated to acquire system identification with CFD data available while the fin pitching motion is selected as a function …

Aether, Thomas Cameron, Kristine Colton, Daren Childers

Electrical Engineering

Aether is a RC-style autonomous air vehicle that utilizes GPS positioning along with a wireless communication system to achieve a computer-controlled flight.

This report will incorporate the acquisition, design, integration, implementation and testing phases of the UAV development. Furthermore a discussion of troubleshooting as well as improvements for future projects will be included.

Stochastic Optimal Control In Nonlinear Systems, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Stochastic control is an important area of research in engineering systems that undergo disturbances. Controlling individual states in such systems is critical. The present investigation is concerned with the application of the stochastic optimal control strategy developed by To (2010) and its implementation as well as providing computed results of linear and nonlinear systems under stationary and nonstationary random excitations. In the strategy the feedback matrix is designed based on the achievement of the objectives for individual states in the system through the application of the Lyapunov equation for the system. Each diagonal element in the gain or associated gain …

Towards A Metric For The Assessment Of Safety Critical Control Systems, Oscar R. Gonzalez, Jorge R. Chavez-Fuentes, W. Steven Gray

Electrical & Computer Engineering Faculty Publications

There is a need for better integration of the fault tolerant and the control designs for safety critical systems such as aircraft. The dependability of current designs is assessed primarily with measures of the interconnection of fault tolerant components: the reliability function and the mean time to failure. These measures do not directly take into account the interaction of the fault tolerant components with the dynamics of the aircraft. In this paper, a first step to better integrate these designs is made. It is based on the observation that unstable systems are intrinsically unreliable and that a necessary condition for …

Performance Analysis And Validation Of A Recoverable Flight Control System In A Simulated Neutron Environment, Hong Zhang, W. Steven Gray, Oscar R. Gonzalez

Electrical & Computer Engineering Faculty Publications

This paper introduces a class of stochastic hybrid models for the analysis of closed-loop control systems implemented with NASA's Recoverable Computer System. Such Recoverable Computer Systems have been proposed to insure reliable control performance in harsh environments. The stochastic hybrid models consist of either a stochastic finite-state automaton or a finite-state machine driven by a Markov input, which in turn drives a switched linear discrete-time dynamical system. Their stability and output tracking performance are analyzed using an extension of the existing theory for Markov jump-linear systems. For illustration, a stochastic hybrid model is used to calculate the tracking error performance …

Fundamentals Of Linear State Space Systems, John Bay

Electrical and Computer Engineering Faculty Scholarship

This book addresses two primary deficiencies in the linear systems textbook market: a lack of development of state space methods from the basic principles and a lack of pedagogical focus. The book uses the geometric intuition provided by vector space analysis to develop in a very sequential manner all the essential topics in linear state system theory that a senior or beginning graduate student should know. It does this in an ordered, readable manner, with examples drawn from several areas of engineering. Because it derives state space methods from linear algebra and vector spaces and ties all the topics together …

Comparison Of System Identification Techniques For The Dexterous Orbital Servicing System (Doss), Allan Terrence Morris

Electrical & Computer Engineering Theses & Dissertations

The major contribution of system identification is the development of analytical models of a system. Many identification techniques can adequately describe the input and output map. One of the challenges of these techniques is to correctly infer from the measured data the characteristics of the individual, contributing components producing a more accurate system model.

In this thesis linear, dynamic, multivariable state-space models for three joints of the Dexterous Orbital Servicing System (DOSS) are identified. DOSS is a representative space station manipulator at the NASA Langley Research Center. The dynamic models of the manipulator will first be estimated by applying nonparametric …

Design And Implementation Of Fuzzy Logic Controllers. Thesis Final Report, 27 July 1992 - 1 January 1993, Osama A. Abihana, Oscar R. Gonzalez

Electrical & Computer Engineering Faculty Publications

The main objectives of our research are to present a self-contained overview of fuzzy sets and fuzzy logic, develop a methodology for control system design using fuzzy logic controllers, and to design and implement a fuzzy logic controller for a real system. We first present the fundamental concepts of fuzzy sets and fuzzy logic. Fuzzy sets and basic fuzzy operations are defined. In addition, for control systems, it is important to understand the concepts of linguistic values, term sets, fuzzy rule base, inference methods, and defuzzification methods. Second, we introduce a four-step fuzzy logic control system design procedure. The design …