Systems Engineering and Multidisciplinary Design Optimization Commons^™

Prediction Of Satellite Temperature During An Orbit Of A Cubesat, Michael Reynolds

Honors Theses

This thesis develops a thermal-simulation strategy for predicting CubeSat component temperatures, applied to Jag-Sat-1, a CubeSat developed at the University of South Alabama and deployed from the International Space Station in 2022. The orbit was reconstructed from two-line element (TLE) data using simplified general perturbations (SGP4) propagation, and spacecraft attitude was recovered from onboard gyroscope measurements. Sunlight, penumbra, and umbra intervals were computed geometrically, and the external radiative environment — direct solar, Earth infrared, and albedo heat fluxes — was modeled using orientation-dependent view factors. These time-varying fluxes drove a transient finite-element thermal simulation of the full satellite geometry in …

Noise-Optimized Routes For Air Taxi, Waleed Raza

Doctoral Dissertations and Master's Theses

Community noise is a primary barrier to the public acceptance and deployment of Advanced Air Mobility (AAM) and Urban Air Mobility (UAM) air taxi operations. This dissertation develops a coupled siting, routing, and noise optimization framework that links vertiport placement to its downstream acoustic consequences, demonstrated through a Daytona Beach case study. Candidate vertiports are screened and selected using accessibility, safety, demand, and feasibility criteria, and the selected sites form a directed network of 20 routes. Each trajectory is evaluated with a physics-based acoustic pipeline reporting Lmax, SEL, and EPNL at school, hospital, and residential receptors, showing that received exposure …

Optimal Integrated Cfd-Gnc Model For Drag-Based Reentry Dynamics, Sebastian Lopez

Doctoral Dissertations and Master's Theses

This research focuses on optimizing the control of a drag-maneuvering, Starship-class re-entry vehicle by closely integrating high-fidelity aerodynamic data derived from Computational Fluid Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time control feedback, allowing for direct analysis and optimization of vehicle stability, trajectory, and control demands throughout the re-entry process.

Building upon the work of Gaglio and Bevilacqua, this advanced CFD-GNC model introduces high-order aerodynamic effects, such as aerodynamic moments and …

System Integration And Validation Of The Cal Poly Spacecraft Attitude Dynamics Simulator Mk. Iv, Bricen S. Rigby

Master's Theses

The Cal Poly Spacecraft Attitude Dynamics Simulator (SADS) is an ongoing project that seeks to enable the simulation and validation of sensors, actuators, and control logic related to spacecraft attitude control. The SADS platform rests atop a spher- ical air-bearing device which allows for nearly frictionless rotation in all three axes. The orientation of the platform is controlled by four reaction wheels arranged in a pyramidal configuration. Over the past few years, there have been significant updates to the reaction wheel subsystem, as well as requests for a more capable central com- puter. Therefore, a new system architecture for the …

Mars Rover Wheels And Drive, Presley S. Sacavitch, Ryan W. Trevena, Dylan A. Mack, Daniel Hudak

Mechanical Engineering

Cal Poly’s Poly1Rover team, advised by Professor Rich Murray, aims to deploy four student-designed mini-Mars rovers, each equipped with a sample-tube retrieval claw, before 2030. However, the wheels of Poly1Rover’s current 6th generation rover are not ready for deployment to Mars, as they do not utilize space-grade materials, are not optimized for manufacturability, and lack sufficient spoke compliance to absorb landing and high-impact loads. This project will be developed by a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo (Cal Poly): Daniel Hudak, Dylan Mack, Presley Sacavitch, and Ryan Trevena. Next Intent is providing funding …

A Polygon Approach For Satellite Coverage Computation Problems, Caleb I. Arbreton

Master's Theses

During celestial body observation mission planning, predicted sensor coverage is a key analysis tool used by designers to inform concept of operations. It enables trade studies by applying a metric to assess how well different sensor, satellite, and constellation configurations can observe a mission's region of interest. The effectiveness of the studied components is then paramount in determining whether they are justified in the system architecture. Coverage computation becomes more difficult as sensor types and regions of interest (RoIs) deviate from simple shapes, and as problem formulations seek higher-fidelity results. These simplifications include: conical camera sensors, RoIs represented as simple, …

Development Of A Free-Floating Space Robotic Simulator, Truman: Terrestrial Robotic Unit For Multibody Analysis And Navigation, Jackson W. Cordova

Master's Theses

This work describes the development of a 3 Degree-of-Freedom (DOF) robotic manipulator for use on a free-floating planar air-bearing vehicle. The system developed aims to serve as a foundation for future space robotics research at the California Polytechnic State University (Cal Poly)’s Space Robotics Laboratory. Systems doc- umentation describes conceptual operation and architecture of the proposed system: Terrestrial Robotic Unit for Multibody Analysis and Navigation (TRUMAN). The key operation of TRUMAN is to study a self launch maneuver of a free-floating ve- hicle including 4 distinct phases: launch off a fixed rail, coast, reorientation using manipulator motion, and capture of …

Spaceotter: A Floating Spacecraft Simulator Air Bearing Vehicle For Hardware-In-The-Loop Experiments And Research, Alexander Debartolo

Master's Theses

Growing interest in nanosatellites has increased demand for accessible ground-testing methods, which have historically been expensive and restricted. Floating Spacecraft Simulators (FSS), built around Air Bearing Vehicles (ABVs), address this gap by approximating a zero-gravity, friction-minimized environment suitable for testing spacecraft control systems, robotics, and propulsion on the ground.

This thesis presents the design, realization, and initial performance characterization of the Space Optically Tracked Testbed for Experiments and Research (SpaceOTTER) ABV, developed for the Cal Poly Space Robotics Lab. SpaceOTTER is the first step toward emulating the 3 degree of freedom (3-DOF) planar dynamics of a simulated spacecraft and is …

Hamster: Hybrid-Actuated Mobile Spherical Terrain Exploration Rover, Winnie Gao

Master's Theses

The expansion of space exploration to increasingly challenging planetary environments requires mobility systems capable of extreme traversal capabilities and operational reliability. This thesis presents the design, development, and testing of a low-cost Hybrid-Actuated Mobile Spherical Terrain Exploration Rover (HAMSTER) intended for use on a planetary surface exploration mission. HAMSTER uses a pendulum-based actuation method for steering and an actuated internal shaft to propel the vehicle forward. The internal structure includes a two-tiered central case composed of the navigation control module, accelerometer, motor controller, primary DC motor, battery, voltage regulators, Raspberry Pi, pendulum servo motor, and drive shafts. Additive manufacturing through …

A2s Uplink Latency Minimization For Wildfire Monitoring Systems Using Mbse And Stochastic Modeling, Luis Giovanni Wang

Master's Theses

Wildfire response depends on how quickly a detection reaches the people who act on it, and the slowest remaining step is often the link that carries an alert from a remote sensing platform to a satellite. This thesis models the latency of that link, the Air-to-Space uplink, for a wildfire-monitoring UAV that carries a Starlink terminal and sends an ALERT packet to a serving Low Earth Orbit satellite. The uplink is difficult to predict because both the UAV and the satellite move, and because the wildfire environment degrades the channel at the moment the data matters most.

The thesis uses …

Design And Optimization Of A Bluff Body For Energy Harvesting Of Transverse Galloping Induced By Low-Speed Wind Using Bernstein Polynomial Equations, Youssef Wael Abdelmoneim

Theses and Dissertations

In this thesis, a computational framework is proposed for optimizing the aerodynamic shape of bluff bodies used in galloping-based wind energy harvesters. The system targets low-wind speed environments, where normal wind turbines are not effective, offering a potential alternative to batteries used for powering small electronic devices such as wireless sensors. The design relies on the galloping effect, where airflow around a bluff body induces transverse oscillations that drive an energy conversion mechanism. To generate efficient bluff body geometry, the Class-Shape Transformation (CST) method is used to define a wide range of candidate shapes with minimal design parameters. These shapes …

Lunar Manufacturing Systems And The Role Of Additive Recycling Technologies, Camille A. Newman

Honors Theses

Renewed international interest in sustained lunar exploration has created a growing demand for technologies to support long-duration space exploration. Part of the recent Artemis missions and the Moon to Mars initiative is to improve key mission capabilities and fill critical gaps necessary to sustain lunar habitation. Waste management, recycling systems, and manufacturing systems have been identified as critical technologies that need further development before a sustained mission is possible. This thesis explores the feasibility of an additive manufacturing and recycling system designed to process plastic waste generated during extended lunar habitation. Initial research focused on existing manufacturing and recycling technologies …

Leveraging Information Theory And Ecological Network Analysis To Monitor Communication Networks In A Student Aerospace Team, Christine Sessions

Doctoral Dissertations and Master's Theses

Effective communication is a critical component of successful collaboration in group projects and team settings. However, systematically tracking and analyzing team communications can be challenging, especially in complex, multi-member teams such as those found in the aerospace industry. This paper explores an information-theoretic approach that leverages encoding techniques and graph theory to analyze communication networks within a university’s multi-year, student-led cubesat design project (Project COMET). By utilizing Shannon Entropy as a measure of information flow, encoding communication patterns, and analyzing Ecological Network Analysis parameters, this research aims to understand how an Embry-Riddle Aeronautical University student project team evolves over the …

Manned Exploration Of Satellites Of The Outer Planets: An Analysis Of Current Technologies And A Discussion Of Advancements Required, Joshua Carson Meador

Theses and Dissertations

The Solar System’s outer planets have many satellites, some of which are known to be the most likely places to find extraterrestrial life in our celestial backyard. Multiple scientific missions have been sent to glean information from these satellites, yet the possibility of a manned expedition has long been exclusive to science fiction stories. This paper intends to collect and analyze the current state of space travel technology to explore the feasibility of such a mission with modern technology and to discuss which future advancements should be the focal point for making such missions a reality. To begin, data on …

Range Extension Of Electric Propulsion General Aviation Aircraft Using Solar Technology, Mary Kathryn Shultz

Theses and Dissertations

Alternative propulsion technologies in aviation have been a long-time topic of interest as operators aim to bypass growing fuel prices and meet environmental sustainability requirements set globally. Research regarding alternative propulsion technologies is primarily centered around marginally improving efficiency of combustion systems or large-scale implementation of novel technologies. This research evaluates the feasibility of implementing solar-integrated propulsion for general aviation aircraft to extend range through a comparison of full-electric, hybrid solar, and internal combustion engine propulsion systems. This evaluation of existing technology by range analysis indicates that hybrid solar‑electric propulsion is viable primarily for short‑range training and recreational aircraft, rather …

Instrumentation And Control Of A Novel Device To Simulate A Hypersonic Environment, Andrew Marcello

Doctoral Dissertations and Master's Theses

The hypersonic flow regime poses several challenges regarding the design of hypersonic vehicles. Among them is the massive energy and economic expense associated with ground- testing evaluation of material responses within this extreme environment. In order to provide a low-cost, rapid option for preliminary material analysis within hypersonic applications, a novel device is under production to replicate this environment on the surface of these materials. This device has been designed to work in conjunction with Argonne National Laboratory (ANL) Advanced Photo Source (APS) synchrotron, to allow for in-situ characterization of ablation and oxidation on the sample surface.

To achieve this, …

Artificial Intelligence In Human Spaceflight Safety-Critical Systems: A Requirements Framework For Ai-Enabled Computer-Based Control Systems, Liz Bosch

Doctoral Dissertations and Master's Theses

Currently, there is no governing standard that addresses the safe integration of AI into computer-based control systems (CBCS) in human spaceflight. The computer-based control expectations of those safety-critical systems on the International Space Station (ISS) are captured in SSP 50038, Computer-Based Control System Safety Requirements, with one caveat: the standard was not designed with AI applications in mind. SSP 50038 does not cover the probabilistic behavior, opacity, and training-data dependency of modern AI/ML systems. The objectives of this work is to develop an AI taxonomy relevant to safety characteristics (determinism, transparency, data dependency, failure predictability), systematically map AI characteristics against …

Evaluating Runtime Monitoring For Reinforcement Learning-Based Flight Control, Andrew Zubyk

Doctoral Dissertations and Master's Theses

Ensuring safety in adaptive flight controls systems is an ongoing challenge in aviation, especially as advancements in artificial intelligence and machine learning (AI/ML) trend upwards. Reinforcement learning is becoming more common in aerospace applications due to the ability to improve these models through training.  While models such as reinforcement learning enable controllers to learn complex behaviors from interaction with the environment, their unpredictability in novel or disturbed conditions raises severe concerns in safety-critical domains. This research investigates the integration of runtime monitoring, a real-time assurance technique, with reinforcement learning-based flight controllers to ensure safety and reliability during flight. By supervising …

A Scalable Iteration Of The Horizon Simulation Framework Using Multithreading Techniques, Jason E. Beals

Master's Theses

The Horizon Simulation Framework (HSF) occupies a unique space in the modern aerospace modeling landscape, enabling flexible, modular modeling of mission-level agent behavior through an object-oriented, hierarchical design. HSF's hallmark breadth-first search scheduling algorithm explores a "multiverse" of possible mission execution pathways, enabling exhaustive evaluation of schedule combinations against user-defined heuristics.

As aerospace systems become increasingly complex, HSF faces critical challenges in establishing verifiable, deterministic behavior. The framework's core scheduling algorithm had not undergone systematic validation, leaving questions about temporal consistency, state management correctness, and reproducibility across different program executions. Furthermore, the exponential growth of schedule combinations creates computational bottlenecks …

Flexible Fault-Tolerant Multi-Die Fpga-Based Architectures For Varying Space Environments, Yosof Ali Seif El Din Ali Maklad

Theses and Dissertations

It is well-known fact that spacecraft’s electronic components operate in an extreme harsh and varying space environments, beside changing orbit or passing through Van Allan Belts during orbital course results of radiation levels change. This thesis focuses on SRAM-based FPGA systems on-board of such spacecrafts, that are commonly utilized in space applications’ critical applications due to their capabilities and flexibility to reconfigure, since these systems are vulnerable to frequent negative impacts of ionizing radiation, thus inducing soft and hard errors leading to disastrous failures that could jeopardize the entire spacecraft. The soft errors’ effects are frequent yet can be mitigated, …

Torque-Based Detection And Isolation Of Bucket-Specific Load Variations In A Continuous Bucket Ladder Excavator, Mason R. Krause

Dissertations, Master's Theses and Master's Reports

Understanding how cutter geometry, material, and operating conditions influence excavation performance is critical for the design of lunar surface systems operating in regolith environments. This work presents a torque-based methodology for detecting and quantifying bucket-specific load variations in a continuous bucket ladder excavator. A nine-bucket excavator was constructed to record drivetrain torque while operating in a regolith simulant over multi-day test periods. Each bucket featured a unique combination of cutting edge material and geometry. A method was developed to separate the continuous torque data into individual excavation events, enabling identification of individual bucket interactions. Analysis of the resulting event-based dataset …

Students For The Exploration And Development Of Space (Seds) Air Brake Subsystem: High-Altitude Autonomous Apogee Modulator System For High-Powered Rockets (Haamshr), Camden J. Maclean, Matthew Wharton, Nick Revis, Colin Guido

Honors Theses and Capstones

The objective of this project was to research, design, fabricate, and analyze an autonomous apogee modulation air brake system for the University of New Hampshire (UNH) Students for Exploration and Development of Space (SEDS) high-powered rocket as competitors in the Friends of Amateur Rocketry – Oxidizers Uninhibited Tournament (FAR-OUT) competition.

This air brake system would be developed with considerations for full autonomy, structural reliability, and repeatable deployment. The design would also be easily integrated into the existing high-powered rocket airframe and mechanically simple to increase reliability and practical functionality. The final design would be evaluated using finite element analysis simulation …

Lunar Regolith Densometer, Liam Lee, Vincent Innocenzi

Williams Honors College, Honors Research Projects

Testing of extraterrestrial rovers is a growing concern as lunar exploration as an industry is becoming increasingly commercialized. Currently, the way rover testing is conducted is on a soil regolith which is already available. The structure of the soil, however, is harmful to humans and requires a full bunny suit and respirator to be worn during the conduction of the experiment. This limitation, along with the expensive price tag, prevents college university students and companies from establishing a rover test area in labs. The goal of the overall project is to create a safer testing environment by mimicking the soil-to-tire …

Large Telescope Mount For Long Exposure Photos, Payne M. Landis, Anna J. Gray

Williams Honors College, Honors Research Projects

When viewing the stars through a telescope, it is common that the object you are viewing drifts out of view. Many amateur astronomers seek to capture long exposure images of the stars, planets, and galaxies with commercially available sky tracking telescope mounts. The complication is that these telescope mounts are both incredibly expensive and have low weight limits. These issues limit accessibility to these products based on the telescope. For each person, telescope parameters determine the amount of light and magnification that can be viewed, which then determines exposures time for adequate photo results. The options on the market for …

Automated Soil Resetting System For Extraterrestrial Regolith Simulation, Parker W. Brennan, Anthony C. Daniels

Williams Honors College, Honors Research Projects

This project focuses on designing an automated soil resetting system for extraterrestrial regolith simulation. The system will prepare a regolith simulant testbed to a desired, repeatable density, enabling reliable wheel–terrain testing for planetary rover research. Manual soil preparation currently exposes testers to hazardous particulates and produces inconsistent results.

The proposed system will integrate mechanical and control elements to reset the soil bed safely and efficiently. A combination of raking and vibrational methods will be explored, with feedback sensors and automation to achieve target density control. The research will proceed through literature review, benchtop experimentation, prototype design, and full-scale testing over …

Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno

Dissertations, Master's Theses and Master's Reports

The Artemis Missions aim to establish a sustained human presence on the Moon, requiring In-Situ Resource Utilization (ISRU) of water-ice deposits in permanently shadowed regions. Two critical capabilities must be developed to enable ISRU at scale: prospecting instruments that can characterize the spatial distribution and geotechnical properties of icy regolith in situ, and excavation systems that can extract hardened icy regolith efficiently. This dissertation addresses both needs through the development and testing of a Percussive Heated Cone Penetrometer (PHCP) for geotechnical prospecting and a chain trencher excavator for icy regolith mining.

The PHCP was developed across eight design iterations and …

Orbital Reliable Printed Circuit Boards, Thomas Maxwell Starnes, Keegan Blake Jordan, Ian Griffith, Grant Monroe Pesqueira, Vishal Navin Patel

Senior Design Project For Engineers

Deep Interstellar Solutions is proposing a device to produce custom, serviceable printed circuit boards (PCBs) in low Earth orbit. This technology uses blank PCBs that are laser-etched and prepared for electrical components, then stored in the module. This method of PCB production allows for rapid repairs or prototyping without the need for subsequent resupply missions. By implementing this technique, future missions will achieve greater autonomy, sustainability, and resource efficiency. The goal of this development is to pioneer the creation of custom circuitry for use in deep-space missions where resupply is neither cost-effective nor timely.

Tradespace Exploration For Multiple Collaborative Vehicles, Mrunal Deshmukh

All Theses

Modern military operations demand systems that adapt to uncertain, rapidly changing missions across diverse terrains. Traditional single-platform vehicle design is insufficient for such complexity. This research introduces a hierarchical tradespace exploration framework for designing and evaluating families of heterogeneous ground vehicles under a System-of-Systems (SoS) architecture. The framework treats vehicle design as a co-optimization problem, where a “parent” vehicle (e.g., a Squad Multipurpose Equipment Transport) coordinates specialized “child” vehicles for reconnaissance, amphibious tasks, terrain traversal, and stealth missions. Unlike conventional approaches that optimize vehicles individually, this study emphasizes collaborative performance, resource sharing, and adaptability at the family level. Central to …

Understanding Policy Transfer Under Decomposition And Coordination: Sequential Reinforcement Learning With Relaxation-Based Feasibility Control, Aannand Lal

All Theses

This thesis investigates how decomposition and coordination (D&C) choices influence exploration, learning, and transfer in reinforcement learning (RL) based design frameworks. A unified methodology is developed to evaluate generality under decomposition and to demonstrate sequential coordination on a representative physical task. The generality study holds the underlying physics constant while varying problem presentation - specifically scalarization weights, objective orientations, and feasibility handling. A train-evaluate matrix is constructed in which each trained policy is assessed across all alternative decompositions. Set-based diagnostics quantify generality through exact-match identity, Jaccard similarity of distinct feasible states, total feasible coverage, and Pareto-front quality. Results show that …

Orbital Maneuvers And Interplanetary Trajectory Design Via Reinforcement Learning, Roberto Cuéllar Rangel

Doctoral Dissertations and Master's Theses

This dissertation investigates the application of reinforcement learning (RL) to the design and optimization of low-thrust spacecraft trajectories, with an emphasis on autonomy, adaptability, and robustness in the presence of system uncertainties and unmodeled perturbations. Classical approaches to low-thrust trajectory design are predominantly grounded in optimal control theory, which relies on the availability of precise dynamical models and often requires problem-specific reformulation and solver tuning. While optimal control methods offer high accuracy under deterministic conditions, their sensitivity to stochastic disturbances and computational limitations in highly nonlinear or uncertain environments pose significant challenges for future autonomous space missions.

To address these …