Systems Engineering and Multidisciplinary Design Optimization Commons^™

Model Curricula: University Of Oklahoma

Online Journal of Space Communication

University of Oklahoma Aerospace Engineering

Model Curricula: Space Foundation

Online Journal of Space Communication

The Space Foundation is a national non-profit organization advancing space awareness and space education.

The Space Foundation pursues the mission of vigorously advancing civil, commercial and national security space endeavors for a brighter future and supporting educational excellence through the excitement of space.

Model Curricula: Umea University, Carol Norberg

Online Journal of Space Communication

The town of Kiruna, lying 140 kilometres above the Arctic Circle in northernSweden, has for many years been considered the ‘‘space centre’’ of Sweden.The high latitude makes Kiruna an attractive base for international spaceresearch. This paper describes the practical-oriented Space EngineeringProgram run in Kiruna by the University of Umeå. The students on theprogram benefit from the expertise of resident and visiting space scientistsand engineers. The education is the only one of its kind in Sweden.

Model Curricula: Esa Telecom Training Programme

Online Journal of Space Communication

This paper describes the content of an e-training course on satellite communications prepared under contract to ESA and now available at the ESA Telecom User Support Office website. The contract to develop this online training was led by EADS Fleximage with significant contributions from a team of subcontractors including EADS Astrium, British Telecom Exact Technologies, ENSAE/ SUP'Aero and ISU. The course is divided into five modules covering the following areas in an animated and progressive way:

• Systems and Services
• Communication Link
• Networking
• Space Segment
• Earth Segment

Model Curricula: International Space University

Online Journal of Space Communication

How to educate Space professionals able to meet the needs of the Space community and the challenges of a changing Space sector in a changing world? The International Space University (ISU) was created in 1987 to educate Space leaders using a unique approach. ISU programs are based on a "3-I" International, Interdisciplinary and Intercultural) model which was built from discussions and meetings within the world Space community to meet its evolving needs.

Model Curricula: Ohio University

Online Journal of Space Communication

Programs of Education Relating to Satellite and Space Communication in:

Telecommunication Communications Systems Management

Electrical Engineering and Computer Science

Model Curricula: George Washington University

Online Journal of Space Communication

There is a growing need for qualified engineers, scientists, technicians, marketing and sales and management personnel in the field of satellite applications and only a few universities that are actually offering undergraduate or graduate degrees in this area.

Model Curricula: Embry-Riddle Aeronautical University

Online Journal of Space Communication

Many universities have added courses and curricula related to satellites and space. A search of the Internet reveals that few of these are designated degree programs in space studies degree, rather they are traditional programs offering courses and concentrations which involve study of space and space applications from several perspectives. The Internet search also reveals a large variation in both the titles and the curricula for these programs. The author has sought to standardize definitions, identify workable program names and suggest core courses. Five programs and their core courses are outlined for consideration.

Database Of Academic Institutions: International

Online Journal of Space Communication

Institutions, research centers and professional associations around the world that do research and teach content and skills relating to satellite and space communication.

Database Of Academic Institutions: United States K-12

Online Journal of Space Communication

Institutions, research centers and professional associations in the United States that do research and teach content and skills relating to satellite and space communication at the K-12 level.

Determination Of The Feature Resolution Of Processed Image Data Via Statistical Analysis, Joseph S. Indeck, Jesus O. Mares Jr., James P. Vitarelli, Kavan Hazeli

PRC-Affiliated Research

A method is presented to determine the feature resolution of physically relevant metrics of data obtained from segmented image sets. The presented method determines the best-fit distribution curve of a dataset by analyzing a truncated portion of the data. An effective resolvable size for the metric of interest is established when including parts of the truncated dataset results in exceeding a specified error tolerance. As such, this method allows for the determination of the feature resolution regardless of the processing parameters or imaging instrumentation. Additionally, the number of missing objects that exist below the resolution of the instrumentation may be …

Determination Of The Feature Resolution Of Processed Image Data Via Statistical Analysis, Joseph S. Indeck, Jesus O. Mares Jr., James P. Vitarelli, Kavan Hazeli

PRC-Affiliated Research

A method is presented to determine the feature resolution of physically relevant metrics of data obtained from segmented image sets. The presented method determines the best-fit distribution curve of a dataset by analyzing a truncated portion of the data. An effective resolvable size for the metric of interest is established when including parts of the truncated dataset results in exceeding a specified error tolerance. As such, this method allows for the determination of the feature resolution regardless of the processing parameters or imaging instrumentation. Additionally, the number of missing objects that exist below the resolution of the instrumentation may be …

A Model-Based Systems Engineering Approach To E-Vtol Aircraft And Airspace Infrastructure Design For Urban Air Mobility, Heidi Selina Glaudel

Mechanical & Aerospace Engineering Theses & Dissertations

This paper serves to contribute to Model-Based Systems Engineering (MBSE) by following the NASA Systems Engineering Handbook framework for a Systems Engineering (SE) design approach to an Electric Vertical Takeoff and Landing (e-VTOL) aircraft and the incorporating airspace infrastructure. The focus of this study is, by using the MBSE model created, to capture the technical requirements definition and design intent of the vehicle and airspace inclusive of community specific knowledge derived from the Federal Aviation Administration (FAA) NextGen Urban Air Mobility (UAM) Concept of Operations (ConOps) version 1.0. The stakeholder requirements derived from the FAA UAM NextGen ConOps will form …

Cubesat Development Framework, William D. Sousa

Theses and Dissertations

AFITs Center for Space Research and Assurance (CSRA) has developed several small satellites without a detailed developmental framework in place but future work will focus on CubeSat development with the intent of managing multiple builds concurrently. With the goal of each satellite being completed in three years, a comprehensive process needs to be established. Research revealed that the Department of Defense (DoD), U.S. Air Force (USAF), and National Aeronautics and Space Administration (NASA) guidance on the acquisition and systems engineering processes require more reviews and deliverables than appropriate for CSRAs projects. The development processes from other universities divulge some aspects …

A Method For Visualizing The Structural Complexity Of Organizational Architectures, Jacob Michael B. King

Master's Theses

To achieve a high level of performance and efficiency, contemporary aerospace systems must become increasingly complex. While complexity management traditionally focuses on a product’s components and their interconnectedness, organizational representation in complexity analysis is just as essential. This thesis addresses this organizational aspect of complexity through an Organizational Complexity Metric (OCM) to aid complexity management. The OCM augments Sinha’s structural complexity metric for product architectures into a metric that can be applied to organizations. Utilizing nested numerical design structure matrices (DSMs), a compact visual representation of organizational complexity was developed. Within the nested numerical DSM are existing organizational datasets used …

A Reference Architecture For Rapid Cubesat Development, Sean R. Kelly

Theses and Dissertations

The CubeSat class of nanosatellites has lowered the barrier of entry to space and has rapidly gained popularity in recent years. To successfully design a CubeSat system in a rapid cycle conducive to academic timelines, a Reference Architecture geared towards University CubeSat development would be helpful. A Reference Architecture would speed up the development process by providing a template, capturing previous work and lessons learned from subject matter experts, providing a framework to focus on the CubeSats design rather than the fine details of modeling software. A Reference Architecture can also add functionality that student teams could use and improve …

Comparison Of Decision Analysis Methods For A Cubesat Propulsion System, Jared L. Pilcher

Theses and Dissertations

Low Earth Orbit (LEO) is becoming an increasingly congested orbital regime. As a result, propulsion systems on CubeSats are becoming a more desirable feature to provide them with collision avoidance capabilities. To date, there have been very few CubeSat launches with a propulsion system on them. Due to the relatively high cost of a propulsion system compared to the budget of small educational organizations, a decision analysis model is needed so that these organizations can make the best decision between whether to purchase a Commercial-Off-The-Shelf (COTS) product or to develop one within the organization. This research applies three decision analysis …

Modeling Situation Awareness In A Uav Scenario Using Sysml, Tommy R. Hernandez

Theses and Dissertations

The U.S. Department of Defense (DoD) is rapidly moving towards using increasingly automated systems. Unmanned Aerial Systems (UAS) will be used in contested environments where direct human control may be impossible for long stretches of time. This increase in automation brings with it challenges in maintaining resilient Situation Awareness (SA) for operators, who still need to set goals for the UAS to accomplish their missions. Simultaneously, the DoD is increasing the adoption of Model-Based Systems Engineering (MBSE) in the development of weapon systems. This thesis explores the use of SysML to model of an SA repair system for a UAS …

Propose Of Architecture Design For Early Warning System With Space And Terrestrial Infrastructure, Akihiko Nishino

CESUN Conference

The purpose of this research is to design an architecture of early warning system with Global Navigation Satellite System (GNSS) and terrestrial infrastructure for improving a coverage of disaster information dissemination. In the proposed architecture, segments and information flow are identified in order to introduce an early warning system to target areas where there are no such kinds of public alert distribution. It can be adapted worldwide by combining GNSS satellite and terrestrial infrastructure. At the beginning of disaster, information will be sent from the agency via GNSS to terrestrial infrastructure, widely used such as a siren and a public …

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh

Progress in Scale Modeling, an International Journal

For decades, traditional scale-modeling techniques have been relying on first-principles models (FPMs). FPMs have been used to find non-dimensional numbers (PIs) and identify normalized underlying forces and energies behind the phenomenon in focus. The two main challenges with FPM-based PIs extraction are finding the relevant PIs and proper correlations between PIs. The emergence and surge of data-driven modeling (DDM) provide a new opportunity to leverage experimental data in model development across scales/plants. In this paper, first, the two mentioned issues in PIs development will be elaborated to reveal the gap, and second, a new insight into scale modeling and similarity …

Tooling Design Modeling For Composite Fuselage Of Beechcraft King Air 250 Using Catia, Miazor Fidelis Ekom

Journal of Aviation Technology and Engineering

Aircraft’s constant operation in tough conditions necessitates the need for structural components of high strength yet low weight. Composite materials are being used as an alternative to conventional aluminum alloys because of their competitive strength-to-weight and stiffness-to-weight ratios. In this paper, the detailed design procedure of a light-aircraft composite material fuselage tooling in three dimensions is shown. In its operation, the layup tools provide a surface for the composite part which is the correct shape of the part and is stable through the cure cycle, and also providing a means of indexing the part for the next manufacturing operation. This …

Hybrid Models As Transdisciplinary Research Enablers, Andreas Tolk, Alison Harper, Navonil Mustafee

Computational Modeling & Simulation Engineering Faculty Publications

Modelling and simulation (M&S) techniques are frequently used in Operations Research (OR) to aid decision-making. With growing complexity of systems to be modelled, an increasing number of studies now apply multiple M&S techniques or hybrid simulation (HS) to represent the underlying system of interest. A parallel but related theme of research is extending the HS approach to include the development of hybrid models (HM). HM extends the M&S discipline by combining theories, methods and tools from across disciplines and applying multidisciplinary, interdisciplinary and transdisciplinary solutions to practice. In the broader OR literature, there are numerous examples of cross-disciplinary approaches in …

Spacecraft Informatics, K. L. Yung, Lida Xu, Chris Zhang

Information Technology & Decision Sciences Faculty Publications

No abstract provided.

The Kentucky Re-Entry Universal Payload System (Krups): Orbital Flight, James Tyler Nichols

Theses and Dissertations--Mechanical and Aerospace Engineering

Due to the uniqueness of atmospheric entry environments, ground facilities cannot accurately replicate re-entry conditions. Consequently, scientists primarily rely on numerical models to predict these conditions and inform Thermal Protection System (TPS) designs. These models often lack flight validation, which is necessary for increasing their fidelity. Thus, there is a substantial need to obtain such data to advance modeling capabilities.

The Kentucky Re-entry Universal Payload System (KRUPS) is an adaptable test-bed for scientific experimentation with initial application to TPS. This vehicle was designed at the University of Kentucky to serve as an inexpensive means of obtaining validation data to enhance …

Structural Optimization Of Space Transit Vehicle Concept, Hercules, James Philip Rogers

Theses and Dissertations--Mechanical and Aerospace Engineering

STRUCTURAL OPTIMIZATION OF SPACE TRANSIT VEHICLE CONCEPT, HERCULES:

A COMPARATIVE STUDY OF STRUCTURAL OPTIONS

Hercules is a vehicle concept developed by NASA Langley's Vehicle Analysis Branch to satisfy the need for sustainable transit between Earth, the moon, and Mars. Hercules features unprecedented abort capabilities and mission flexibility to aid in NASA's Mars campaign. By utilizing modern software to perform structural analysis and optimization for a large selection of stiffened panel concepts, beam concepts, and materials trends in the structural optimization emerge. These trends will be invaluable for the design of future spacecraft needed to fulfill similar roles.

The structural optimization …

Quantum Safety Metrics Framework For Commercial Unmanned Aircraft Operators, Tracy L. Lamb, Nathan A. Phillips, Trong Van Nguyen

International Journal of Aviation, Aeronautics, and Aerospace

Commercial unmanned aircraft systems continue to increase in applications and diversity; however, mishaps and accidents erode safety, investment return, and efficiency. Most unmanned aircraft accidents are preceded by leading indicators; the ability to forecast and quantify these may provide increased safety and profitability. This mixed-method research study used a non-experimental parallel convergence approach with multiple instruments, multiple-case study n = 22, and one exemplar case design to develop a quantum safety metric program. This study used a combination of previously validated methods as development instruments, including; the HFACS, STAMP, 'Sierra Scale,' and Accident Prevention Effort equations. The study extended the …

Internet Of Things 36-Rotor Multicopter For Ionizing Radiation Surveying, Svetoslav Zabunov, Garo Mardirossian, Rositsa Miteva, Todor Kunchev

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an Internet of things 36-rotor unmanned aerial vehicle suitable for radiological surveying of buildings and facilities. The design of the 36-rotor multicopter platform is disclosed. The aircraft is used as a testbed for a lightweight gamma/beta/neutron ionizing radiation sensor closely coupled with the autopilot of the multirotor aircraft. A prototype of the drone and sensor was developed and initial tests were conducted. Test results are presented with data from measuring different radiation sources. The proposed novel design is compared to existing work and advantages to the latter were established.

Influence Of The Inherent Safety Principles On Quantitative Risk In Process Industry: Application Of Genetic Algorithm Process Optimization (Gapo), Mehdi Jahangiri, Abolfazl Moghadasi, Mojtaba Kamalinia, Farid Sadeghianjahromi, Sean Banaee

Community & Environmental Health Faculty Publications

Inherent safety (IS) refers to a set of measures that enhance the safety level of processes and equipment, rendering additional equipment and/or add-ons. The early design phase of processes is suited best for implementation of IS strategies as some of such strategies either are impossible to be implemented at the operation phase or substantially increase costs. The purpose of this study is to present a new approach called genetic algorithm process optimization (GAPO), by which processes can be made inherently safer even at the operation phase. This study simulates the IS principle, assessing its impact on quantitative risk and the …

Design And Testing Of A Feed-Forward Control System For Deployable Vortex Generators Dependent On Angle Of Attack, Solomon B. Whitmire, Christopher J. Chapanar, Kirklin M. Anderson, Nickalus R. Amon, Daniel W. Chech

Williams Honors College, Honors Research Projects

A vortex generator (VG hereafter) is a common feature of an aircraft wing that disturbs the flow on the leading edge of the wing, thus energizing the boundary layer and reducing flow separation. For an aircraft experiencing flow separation, VGs can increase the lift-to-drag ratio of the wing and prevent stall; however, if flow separation isn’t an issue, the unnecessary frontal area of the VGs has the potential to produce parasitic drag. This study seeks to determine whether the use of a deployment system can improve the performance of VG’s by raising or lowering them depending on the angle of …

Multidisciplinary And Multi-Objective Optimal Design Of A Cascade Control System For A Flexible Wing With Embedded Control Surfaces Having Actuator Dynamics, Christopher Stephen Greer

Theses, Dissertations and Capstones

A multidisciplinary and multi-objective optimization approach that integrates the design of the control surfaces’ sizes, active control systems, and estimator for an aircraft’s wing with three control surfaces is developed. Due to its attractive stability robustness properties, a control system based on the LQR (Linear Quadratic Regulator) is built for each control surface. The geometrical parameters of the control surfaces such as the span wise and chord lengths, the design details of the LQR penalty matrices, and the locations of the estimator poles are tuned by a widely used multi-objective optimization algorithm called NSGA-II (Non-dominated Sorting Genetic Algorithm). Four objectives …