Mechanical Engineering Commons^™

Variation Simulation Of Fixtured Assembly Processes For Compliant Structures Using Piecewise-Linear Analysis, Michael L. Stewart

Theses and Dissertations

While variation analysis methods for compliant assemblies are not new, little has been done to include the effects of multi-step, fixtured assembly processes. This thesis introduces a new method to statistically analyze compliant part assembly processes using fixtures. This method, consistent with the FASTA method developed at BYU, yields both a mean and a variant solution. The method, called Piecewise-Linear Elastic Analysis, or PLEA, is developed for predicting the residual stress, deformation and springback variation in compliant assemblies. A comprehensive, step-by-step analysis map is provided. PLEA is validated on a simple, laboratory assembly and a more complex, production assembly. Significant …

Almost Global Asymptotic Formation Stabilization Using Navigation Functions, Amit Kumar, Herbert G. Tanner

Mechanical Engineering Faculty Publications

We present a navigation function through which a group of mobile agents can be coordinated to achieve a particular formation, both in terms of shape and orientation, while avoiding collisions between themselves and with obstacles in the environment. Convergence is global and complete, subject to the constraints of the navigation function methodology. Algebraic graph theoretic properties associated with the interconnection graph are shown to affect the shape of the navigation function. The approach is centralized but the potential function is constructed in a way that facilitates complete decentralization. The strategy presented will also serve as a point of reference and …

Modeling, Fabrication, And Optimization Of Niobium Cavities Phase Iii: Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

This quarterly report provides an update to the last phase of the Modeling, Fabrication, and Optimization of Niobium Cavities. Designing the experimental setup of secondary electron emission was well underway in early summer of 2003 when funding was made available for this portion the study. By March 2004, many of the components of the experimental study reached UNLV with some assembly accomplished. The first secondary electron emission (SEE) measurement was made from the surface of a Faraday cup in September 2004. At a particular beam energy, the current measured with the Faraday cup and electrometer changed sign over a range …

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

Japanese R&D On Large-Scale Co2 Capture, Takahisa Yokoyama

Separations Technology VI: New Perspectives on Very Large-Scale Operations

The Special Report on Carbon dioxide Capture and Storage was recently accepted by IPCC (1). In the context of optimization and integration of CO2 capture and sequestration, CO2 capture is a particularly important step. This paper presents a broad overview of key issues of CO2 capture technologies in the Japanese R&D, focusing on their application to large-scale power plants.

Work Flow Policy And Within-Worker And Between-Workers Variability In Performance, Kenneth Howard Doerr, Tali Freed, Terence R. Mitchell, Chester A. Schriesheim, Xiaohua Zhou

Industrial and Manufacturing Engineering

Work flow policies are shown to induce a change in average between-workers variability (worker heterogeneity) and within-worker variability in performance times. In a laboratory experiment, the authors measured the levels of worker heterogeneity and within-worker variability under an individual performance condition, a work sharing condition, and a fixed assignment condition. The work sharing policy increased the levels of worker heterogeneity and worker variability, whereas the fixed assignment policy decreased them. These effects, along with work flow policy main effects on mean performance times and variability are examined. This article represents an initial step in understanding effects that may be important …

Trapezoidal Phase-Shifting Method For 3d Shape Measurement, Peisen S. Huang, Song Zhang, Fu-Pen Chiang

Song Zhang

We propose a novel structured light method, namely trapezoidal phase-shifting method, for 3-D shape measurement. This method uses three patterns coded with phase-shifted, trapezoidal-shaped gray levels. The 3-D information of the object is extracted by direct calculation of an intensity ratio. Theoretical analysis showed that this new method was significantly less sensitive to the defocusing effect of the captured images when compared to the traditional intensity-ratio based methods. This important advantage makes large-depth 3-D shape measurement possible. If compared to the sinusoidal phase-shifting method, the resolution is similar, but the processing speed is at least 4.5 times faster. The feasibility …

On The Equilibrium States Predicted By Second Moment Models In Rotating, Stably Stratified Homogeneous Shear Flow, Minsuk Ji, Paul A. Durbin

Paul A. Durbin

The structural equilibrium behavior of the general linear second-moment closure model in a stably stratified, spanwise rotating homogeneous shear flow is considered with the aid of bifurcation analysis. A closed form equilibrium solution for the anisotropy tensor aij, dispersion tensor Kij, dimensionless scalar variance q2/k (S/Sθ)2, and the ratio of mean to turbulent time scale ε/Sk is found. The variable of particular interest to bifurcation analysis, ε/Sk is shown as a function of the parameters characterizing the body forces: Ω/S (the ratio of the rotation rate to the mean shear rate) for rotation and Rig (the gradient Richardson number) for …

In-Drift Natural Convection And Condensation, Stephen W. Webb, Phillip Rogers, John Del Mar, Darrell Svalstad, Cliff Howard, Ernest Hardin, Bechtel Saic Company, Llc

Publications (YM)

The Yucca Mountain repository configuration consists of waste packages stored inside of underground tunnels, or drifts. The waste packages generate heat due to radioactive decay, and moisture flows into and out of the drifts in liquid and vapor form. Heat and mass transfer within the drifts, including interaction with the surrounding rock, are potentially important processes for the performance of the repository. The present report documents models for in-drift heat and mass transfer during the post-closure period. Pre-closure, or ventilated, conditions are documented in a separate report (BSC 2004 [DIRS 169862]).

Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak

Mechanical and Aerospace Engineering Faculty Publications

Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use in terms of these major end uses.

The LEA methodology uses as few as 60 easily obtainable data points. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are developed. The statistical models are used to subdivide plant energy use into facility, space-conditioning and production-related components.

These breakdowns suggest the savings potential from …

Ole Miss Engineer 2004

Ole Miss Engineer

No abstract provided.

Layer-By-Layer Nanoassembly Combined With Microfabrication Techniques For Microelectronics And Microelectromechanical Systems, Jingshi Shi

Doctoral Dissertations

The objective of this work is to investigate the combination of layer-by-layer self-assembly with microfabrication technology and its applications in microelectronics and MEMS.

One can assemble, on a standard silicon wafer, needed multilayers containing different nanoparticles and polymers and then apply various micromanufacturing techniques to form microdevices with nanostructured elements.

Alternate layer-by-layer self-assembly of linear polyions and colloidal silica at elevated temperatures have been firstly studied by QCM and SEM. LbL self-assembly and photolithography were combined to fabricate an indium resistor. The RTA method was employed in the fabrication. Hot-embossing technique as a reasonably fast and moderately expensive technique was …

Science For Stewardship: Multidisciplinary Research On Uss Arizona, Matthew A. Russell, Larry E. Murphy, Donald L. Johnson, Timothy J. Foecke, Pamela J. Morris, Raphy Mitchell

Department of Mechanical and Materials Engineering: Faculty Publications

The National Park Service’s Submerged Resources Center and USS Arizona Memorial are conducting and coordinating research directed at understanding the nature and rate of natural processes affecting the deterioration of the USS Arizona in Pearl Harbor, Hawaii. The USS Arizona Preservation Project is designed to be multi-year, interdisciplinary and cumulative, with each element contributing to developing an overall management strategy designed to minimize environmental hazard from fuel oil release and provide the basic research required to make informed management decisions for long-term preservation. The primary project focus is toward acquiring requisite data for understanding the complex corrosion and deterioration processes …

2004 (Fall) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the fall of 2004.

The Non-Destructive And Nano-Microstructural Characterization Of Thermal-Barrier Coatings, Y. H. Sohn, B. Jayaraj, S. Laxman, B. Franke, J. W. Byeon, Anette M. Karlsson

Mechanical Engineering Faculty Publications

The durability of thermal barrier coatings (TBCs) plays an important role in the service reliability and maintainability of hot-section components in advanced turbine engines for aerospace and utility applications. Photostimulated luminescence spectroscopy (PSLS) and electrochemical impedance spectroscopy (EIS) are being concurrently developed as complimentary nondestructive evaluation (NDE) techniques for quality control and liferemain assessment of TBCs. This paper discusses recent achievements in understanding the residual stress, phase constituents, and electrochemical resistance (or capacitance) of TBC constituents—with an emphasis on the thermally grown oxide. Results from NDE by PSLS and EIS are correlated to the nano- and microstructural development of TBCs.

Multi-D Cfd Modeling Of Free-Piston Stirling Convertor At Nasa Grc, Scott D. Wilson, Rodger W. Dyson, Roy C. Tew, Mounir B. Ibrahim

Mechanical Engineering Faculty Publications

A high efficiency Stirling Radioisotope Generator (SRG) is being developed for possible use in long duration space science missions. NASA s advanced technology goals for next generation Stirling convertors include increasing the Carnot efficiency and percent of Carnot efficiency. To help achieve these goals, a multidimensional Computational Fluid Dynamics (CFD) code is being developed to numerically model unsteady fluid flow and heat transfer phenomena of the oscillating working gas inside Stirling convertors. Simulations of the Stirling convertors for the SRG will help characterize the thermodynamic losses resulting from fluid flow and heat transfer between the working gas and solid walls. …

Sagittal Plane Biomechanics Cannot Injure The Acl During Sidestep Cutting, Scott G. Mclean, Xuemei Huang, Anne Su, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Background. Knee joint sagittal plane forces are a proposed mechanism of anterior cruciate ligament injury during sport movements such as sidestep cutting. Ligament force magnitudes for these movements however, remain unknown. The need to examine injury-causing events suggests elucidation via model-based investigations is possible. Using this approach, the current study determined whether sagittal plane knee loading during sidestep cutting could in isolation injure the anterior cruciate ligament.

Methods. Experiments were performed on subject-specific forward dynamic musculoskeletal models, generated from data obtained from 10 male and 10 female athletes. Models were optimized to simulate subject-specific cutting movements. Random perturbations …

Admittance Selection For Force-Guided Assembly Of Polygonal Parts Despite Friction, Shuguang Huang, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

An important issue in the development of force guidance assembly strategies is the specification of an appropriate admittance control law. This paper identifies conditions to be satisfied when selecting the appropriate admittance to achieve force-guided assembly of polygonal parts for multipoint contact with friction. These conditions restrict the admittance behavior for each of the various one-point and two-point contact cases and ensure that the motion that results from contact reduces part misalignment for each case. We show that, for bounded friction and part misalignments, if the identified conditions are satisfied for a finite number of contact configurations and friction coefficients, …

Asymptotic Accuracy Of Geoacoustic Inversions, Michele Zanolin, Ian Ingram, Aaron Thode, Nicholas C. Makris

Michele Zanolin

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (July 1 – Sept. 30, 2004), Yingtao Jiang, Bingmei Fu

Transmutation Sciences Materials (TRP)

Dr. Jiang Ma and Mr. Xiaolong Wu worked in LANL between July 1 and Sept. 15 to conduct the experiment. Test of the corrosion of different materials in LBE was performed. The influence of the process of gas introduction to the LBE was studied. Data analysis work was performed based on accumulated data. In the same time, progress has been made in the simulation for transport in oxygen mixing, and one paper was presented in a conference. Another paper was composed and submitted to IEEE International Symposium of Circuits and Systems for the track Chemical Sensors. Preparation of a paper …

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2004 Through September 30, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted a meeting on NHI Materials and Heat Exchanger Design on Monday, May 17. Paul Pickard (Sandia National Lab) and Bill Corwin (Oak Ridge National Lab) facilitated the meeting. The purpose of the meeting was to summarize the hydrogen materials and heat exchanger requirements and priorities for UNLV staff and their collaborators to support the research proposal solicitation for the UNLV Research Foundation HTHX program. Attendance was heavier than anticipated and required a change of venue to accommodate the crowd of over 30.

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

The Benefit Of Using Simulation To Improve The Implementation Of Lean Manufacturing Case Study: Quick Changeovers To Allow Level Loading Of The Assembly Line, Jack J. Mcclellan

Theses and Dissertations

In today's competitive manufacturing environment, companies are constantly looking for ways to improve. Because of this, many companies are striving to become "lean" by implementing lean manufacturing, which is a difficult process. To aid in the implementation of lean manufacturing, simulation was used to reduce the trial-and-error period of lean manufacturing and find to optimum approach to implement the lean manufacturing principle. In this research, a case study of implementing level loading of the production schedule for BullFrog International, L.C. will be examined. To make it possible to implement level loading, the thermo-former machine at the beginning of the operations …

A Review Of Setup Practices And Procedures For Creating Ieee 802.11 Wireless Community Networks, Jae M. Theobald

Theses and Dissertations

IEEE 802.11 wireless networking equipment has made it possible to bridge the last mile for new broadband internet service providers. Inexpensive wireless networking equipment and high gain antennas enable high speed internet delivery at a fraction of the cost of installing or upgrading land lines for cable or DSL services. Based on this research, a guide of general practices and procedures is proposed for designing, installing, and maintaining a reliable wireless community area network. Included tests have provided performance results for several types of wireless antennas (including wire grid parabolic dishes, Yagi and Vagi styles, and echo backfire), wireless bridges, …

Numerical Simulations In Electro-Osmotic Flow, Joseph S. Tenny

Theses and Dissertations

The developing flow field in a parallel plate microchannel, induced by wall motion, has been modeled numerically. This type of flow simulates the physical driving mechanism that exists in electro-osmotically generated flow with large channel diameter-to-Debye length ratios (Z). The physics of the flow field were compared between the moving wall model (MWM) and electro-osmotic flow (EOF) at Reynolds numbers of 1 and 1800, and Z > 2500. Also, Z-values between 50 and 500 were studied to investigate the accuracy of the MWM. Results show that for Z-values greater than 100 the MWM shows good agreement with EOF.

The dynamics of …

An Open Architecture For Versatile Machine And Actuator Control, Michael Scott Baxter

Theses and Dissertations

Automatic control technology increases usability, reliability and productivity in manufacturing, transportation, and climate control. There are many additional areas of modern life that could benefit through automatic control; however, current automation components are too expensive or aren't sufficiently flexible. For example, the cost of current commercial motion control components precludes their use in an average home. This thesis describes an automatic control methodology that is low cost and is flexible enough for a wide variety of control applications. Typical applications could include:

- Home lighting, security and appliances

- Commercial building heating, ventilation and air conditioning

- Industrial machine tool …

Performance And Applications Of Gossamer Wind Solar Powered Ceiling Fans, Florida Solar Energy Center

FSEC Energy Research Center®

Ceiling fans provide a cooling breeze, reduce temperature stratification and improve thermal comfort. Ceiling fans save energy in homes by improving thermal comfort, which results in changes to the thermostat set-point or reduced use of air conditioning.

Microscale Simulation Of Martensitic Microstructure Evolution, Valery I. Levitas, Alexander V. Idesman, Dean L. Preston

Valery I. Levitas

A new model for the evolution of multivariant martensitic microstructure in single crystals and polycrystals is developed. In contrast with Landau-Ginzburg models, which are limited in practice to nanoscale specimens, this new scale-free model is valid for length scales greater than 100 nm and without an upper bound. It is based on a thermodynamic potential in the volume fractions of the martensitic variants that exhibits an instability resulting in microstructure formation. Simulated microstructures in elastic single crystals and polycrystals under uniaxial loading are in qualitative agreement with those observed experimentally.

Electrostatic Radio Frequency (Rf) Microelectromechanical Systems (Mems) Switches With Metal Alloy Electric Contacts, Ronald A. Coutu Jr.

Theses and Dissertations

RF MEMS switches are paramount in importance for improving current and enabling future USAF RF systems. Electrostatic micro-switches are ideal for RF applications because of their superior performance and low power consumption. The primary failure mechanisms for micro-switches with gold contacts are becoming stuck closed and increased contact resistance with increasing switch cycles. This dissertation reports on the design, fabrication, and testing of micro-switches with sputtered bi-metallic (i.e., gold (Au)-on-Au-(6.3at%)platinum (Pt)), binary alloy (i.e., Au-(3.7at%)palladium (Pd) and Au-(6.3at%)Pt), and ternary alloy (i.e., Au-(5at%)Pt-(0.5at%)copper (Cu)) contact metals. Performance was evaluated, in-part, using measured contact resistance and lifetime results. The micro-switches with …

A Tightly-Coupled Ins/Gps Integration Using A Mems Imu, Jonathan M. Neu

Theses and Dissertations

Micro-Electro-Mechanical Systems (MEMS) technology holds great promise for future navigation systems because of the reduced size and cost of MEMS inertial sensors relative to conventional devices. Current MEMS devices are much less accurate than standard inertial sensors, but they can still be useful. In this thesis, data was recorded from an inexpensive MEMS inertial measurement unit and integrated with GPS measurements using a tightly-coupled Kalman filter. The overall goal of this research is to investigate the usefulness of MEMS sensors for a small, real-time, low-cost INS/GPS integration. A golf cart was used to collect dynamic data, along with a commercial …