Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Selected Works

Discipline
Keyword
Publication Year
Publication
File Type

Articles 1 - 30 of 2122

Full-Text Articles in Mechanical Engineering

The Use Of Sacrificial Support Structures In A Rapid Machining Process, Wutthigrai Boonsuk, Matthew C. Frank Sep 2019

The Use Of Sacrificial Support Structures In A Rapid Machining Process, Wutthigrai Boonsuk, Matthew C. Frank

Wutthigrai Boonsuk

Rapid prototyping techniques for CNC machining have been developed in an effort to produce functional prototypes in appropriate materials. One of the major challenges is to develop an automatic fixturing system for the part during the milling process. The current proposed method, sacrificial support fixturing, is similar to the support structures used in existing rapid processes, such as Stereolithography. During the machining process, the sacrificial supports emerge incrementally and, at the end of the process, are the only entities connecting the part to the stock material. In this paper, we propose methodologies for the design of sacrificial support structures for ...


Pre-Methylation Of Lignin To Improve Storage Stability Of Oil Produced By Solvent Liquefaction, Jae-Young Kim, Parinaz Hafezi-Sefat, Sarah D. Cady, Ryan G. Smith, Robert C. Brown Sep 2019

Pre-Methylation Of Lignin To Improve Storage Stability Of Oil Produced By Solvent Liquefaction, Jae-Young Kim, Parinaz Hafezi-Sefat, Sarah D. Cady, Ryan G. Smith, Robert C. Brown

Sarah Cady

In this study, we methylated hydroxyl groups (phenolic hydroxyl: Phe-OH and aliphatic hydroxyl: Aliph-OH) in soda lignin (SL) prior to solvent liquefaction to improve storage stability of the resulting oil. We investigated two methylating reagents, dimethyl sulfate (DMS) and dimethyl carbonate (DMC), for selective Phe-OH and total hydroxyl group (Phe-OH and Aliph-OH) blocking. Samples of SL, DMS-SL, and DMC-SL were depolymerized into oils under supercritical ethanol (350 °C). Both methylated lignins produced higher amounts of oils and smaller amounts of char compared to untreated SL due to suppressed charring reactions. Oil produced from SL had relatively higher functional group contents ...


Plant Disease Identification Using Explainable 3d Deep Learning On Hyperspectral Images, Koushik Nagasubramanian, Sarah Jones, Asheesh K. Singh, Soumik Sarkar, Arti Singh, Baskar Ganapathysubramanian Aug 2019

Plant Disease Identification Using Explainable 3d Deep Learning On Hyperspectral Images, Koushik Nagasubramanian, Sarah Jones, Asheesh K. Singh, Soumik Sarkar, Arti Singh, Baskar Ganapathysubramanian

Baskar Ganapathysubramanian

Background

Hyperspectral imaging is emerging as a promising approach for plant disease identification. The large and possibly redundant information contained in hyperspectral data cubes makes deep learning based identification of plant diseases a natural fit. Here, we deploy a novel 3D deep convolutional neural network (DCNN) that directly assimilates the hyperspectral data. Furthermore, we interrogate the learnt model to produce physiologically meaningful explanations. We focus on an economically important disease, charcoal rot, which is a soil borne fungal disease that affects the yield of soybean crops worldwide.

Results

Based on hyperspectral imaging of inoculated and mock-inoculated stem images, our 3D ...


Computational Finite Element Analysis Of Adaptive Gas Turbine Stator-Rotor Flow Interactions For Future Vertical Lift Propulsion, Nikita Kozak, Luis Bravo, Muthuvel Murugan, Anindya Ghoshal, Yu Yu Khine, Yuri Bazilevs, Ming-Chen Hsu Aug 2019

Computational Finite Element Analysis Of Adaptive Gas Turbine Stator-Rotor Flow Interactions For Future Vertical Lift Propulsion, Nikita Kozak, Luis Bravo, Muthuvel Murugan, Anindya Ghoshal, Yu Yu Khine, Yuri Bazilevs, Ming-Chen Hsu

Ming-Chen Hsu

The objective of this work is to computationally investigate the impact of an incident-tolerant rotor blade concept on gas-turbine engine performance under off-design conditions. Currently, gas-turbine engines are designed to operate at a single condition with nearly fixed rotor speeds. Operation at off-design conditions, such as during hover flight or during takeoff, causes the turbine blade flow to excessively separate introducing performance degradations, excessive noise, and critical loss of operability. To address these issues, the benefits of using an incidence-tolerant rotor blade concept is explored based on a novel concept that articulates the rotating turbine blade synchronously with the stator ...


Deformation Of Multifunctional Materials At Various Time And Length Scales: A Dic-Based Study, Behrad Koohbor Aug 2019

Deformation Of Multifunctional Materials At Various Time And Length Scales: A Dic-Based Study, Behrad Koohbor

Behrad Koohbor

The focus in the present work is to explore and characterize the underlying deformation and failure mechanisms in multifunctional materials including woven composites and polymeric foams, using full-field measurements. Attention has been especially drawn towards the challenges associated with characterizing these materials at extreme length and time scales, and investigating the advantages of full-field measurements to resolve the existing limitations. Accordingly, the current limitations in the study of dynamic deformation response of low-impedance materials are identified. An approach based on the general stress equilibrium is presented and successfully implemented to include the concurrent effects of inertia and material compressibility into ...


Locomotion Of A Cylindrical Rolling Robot With A Shape Changing Outer Surface, Michael G. Puopolo, Jamey D. Jacob, Emilio Gabino Aug 2019

Locomotion Of A Cylindrical Rolling Robot With A Shape Changing Outer Surface, Michael G. Puopolo, Jamey D. Jacob, Emilio Gabino

Michael G. Puopolo

A cylindrical rolling robot is developed that generates roll torque by changing the shape of its flexible, elliptical outer surface whenever one of four elliptical axes rotates past an inclination called trigger angle. The robot is equipped with a sensing/control system by which it measures angular position and angular velocity, and computes error with respect to a desired step angular velocity profile. When shape change is triggered, the newly assumed shape of the outer surface is determined according to the computed error. A series of trial rolls is conducted using various trigger angles, and energy consumed by the actuation ...


Viscoelastic Properties Of Shock Wave Exposed Brain Tissue Subjected To Unconfined Compression Experiments, Annastacia K. Mccarty, Ling Zhang, Sarah Hansen, William J. Jackson, Sarah A. Bentil Aug 2019

Viscoelastic Properties Of Shock Wave Exposed Brain Tissue Subjected To Unconfined Compression Experiments, Annastacia K. Mccarty, Ling Zhang, Sarah Hansen, William J. Jackson, Sarah A. Bentil

Sarah A. Bentil

Traumatic brain injuries (TBI) affect millions of people each year. While research has been dedicated to determining the mechanical properties of the uninjured brain, there has been a lack of investigation on the mechanical properties of the brain after experiencing a primary blast-induced TBI. In this paper, whole porcine brains were exposed to a shock wave to simulate blast-induced TBI. First, ten (10) brains were subjected to unconfined compression experiments immediately following shock wave exposure. In addition, 22 brains exposed to a shock wave were placed in saline solution and refrigerated between 30 minutes and 6.0 hours before undergoing ...


Development Of Optimized Phenomic Predictors For Efficient Plant Breeding Decisions Using Phenomic-Assisted Selection In Soybean, Kyle Parmley, Koushik Nagasubramanian, Soumik Sarkar, Baskar Ganapathysubramanian, Asheesh K. Singh Aug 2019

Development Of Optimized Phenomic Predictors For Efficient Plant Breeding Decisions Using Phenomic-Assisted Selection In Soybean, Kyle Parmley, Koushik Nagasubramanian, Soumik Sarkar, Baskar Ganapathysubramanian, Asheesh K. Singh

Baskar Ganapathysubramanian

The rate of advancement made in phenomic-assisted breeding methodologies has lagged those of genomic-assisted techniques, which is now a critical component of mainstream cultivar development pipelines. However, advancements made in phenotyping technologies have empowered plant scientists with affordable high-dimensional datasets to optimize the operational efficiencies of breeding programs. Phenomic and seed yield data was collected across six environments for a panel of 292 soybean accessions with varying genetic improvements. Random forest, a machine learning (ML) algorithm, was used to map complex relationships between phenomic traits and seed yield and prediction performance assessed using two cross-validation (CV) scenarios consistent with breeding ...


Spontaneous Emission Rate Enhancement With Aperiodic Thue-Morse Multilayer, Ling Li, Cherian J. Mathai, Shubhra Gangopadhyay, Xiaodong Yang, Jie Gao Aug 2019

Spontaneous Emission Rate Enhancement With Aperiodic Thue-Morse Multilayer, Ling Li, Cherian J. Mathai, Shubhra Gangopadhyay, Xiaodong Yang, Jie Gao

Xiaodong Yang

The emergence of multilayer metamaterials in the research field of enhancing spontaneous emission rates has recently received extensive attention. Previous research efforts mostly focus on periodic metal-dielectric multilayers in hyperbolic dispersion region; however, the influence of lattice order in subwavelength multilayers on spontaneous emission is rarely studied. Here, we observe the stronger Purcell enhancement of quantum dots coupled to the aperiodic metal-dielectric multilayer with Thue-Morse lattice order from elliptical to hyperbolic dispersion regions, compared to the periodic multilayer with the same metal filling ratio. This work demonstrates the potential of utilizing quasiperiodic metamaterial nanostructures to engineer the local density of ...


Second-Harmonic Optical Vortex Conversion From Ws₂ Monolayer, Arindam Dasgupta, Jie Gao, Xiaodong Yang Aug 2019

Second-Harmonic Optical Vortex Conversion From Ws₂ Monolayer, Arindam Dasgupta, Jie Gao, Xiaodong Yang

Xiaodong Yang

Wavelength, polarization and orbital angular momentum of light are important degrees of freedom for processing and encoding information in optical communication. Over the years, the generation and conversion of orbital angular momentum in nonlinear optical media has found many novel applications in the context of optical communication and quantum information processing. With that hindsight, here orbital angular momentum conversion of optical vortices through second-harmonic generation from only one atomically thin WS2 monolayer is demonstrated at room temperature. Moreover, it is shown that the valley-contrasting physics associated with the nonlinear optical selection rule in WS2 monolayer precisely determines the output circular ...


Spatial Variation Of Vector Vortex Beams With Plasmonic Metasurfaces, Yuchao Zhang, Jie Gao, Xiaodong Yang Aug 2019

Spatial Variation Of Vector Vortex Beams With Plasmonic Metasurfaces, Yuchao Zhang, Jie Gao, Xiaodong Yang

Xiaodong Yang

The spatial variation of vector vortex beams with arbitrary polarization states and orbital angular momentum (OAM) values along the beam propagation is demonstrated by using plasmonic metasurfaces with the initial geometric phase profiles determined from the caustic theory. The vector vortex beam is produced by the superposition of deflected right- and left-handed circularly polarized component vortices with different helical phase charges, which are simultaneously generated off-axially by the single metasurface. Besides, the detailed evolution processes of intensity profile, polarization distribution and OAM value along the beam propagation distance is analyzed. The demonstrated arbitrary space-variant vector vortex beam will pave the ...


Orbital Angular Momentum Transformation Of Optical Vortex With Aluminum Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao Aug 2019

Orbital Angular Momentum Transformation Of Optical Vortex With Aluminum Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao

Xiaodong Yang

The orbital angular momentum (OAM) transformation of optical vortex is realized upon using aluminum metasurfaces with phase distributions derived from the caustic theory. The generated OAM transformation beam has the well-defined Bessel-like patterns with multiple designed topological charges from -1 to +2.5 including both the integer-order and fractional-order optical vortices along the propagation. The detailed OAM transformation process is observed in terms of the variations of both beam intensity and phase profiles. The dynamic distributions of OAM mode density in the transformation are further analyzed to illustrate the conservation of the total OAM. The demonstration of transforming OAM states ...


Manipulating Transverse Photovoltage Across Plasmonic Triangle Holes Of Symmetry Breaking, Marjan Akbari, Jie Gao, Xiaodong Yang Aug 2019

Manipulating Transverse Photovoltage Across Plasmonic Triangle Holes Of Symmetry Breaking, Marjan Akbari, Jie Gao, Xiaodong Yang

Xiaodong Yang

The transverse photo-induced voltages generated by the photon drag effect under normally and obliquely incident circularly polarized light across the plasmonic symmetry-breaking isosceles-triangle holes and right-triangle holes have been characterized. It is observed that the sign of transverse photovoltage flips when the incident circular polarization is switched for both types of plasmonic triangle holes. However, the unbalanced photovoltage between two circular polarizations is achieved across the plasmonic right-triangle holes, compared to the balanced photovoltage in the plasmonic isosceles-triangle holes. Such manipulation of the sign and the amplitude of transverse photovoltage is enabled by the broken symmetries of the electric and ...


Optical Transportation And Accumulation Of Microparticles By Self-Accelerating Cusp Beams, Weiwei Liu, Xiaodong Yang, Jie Gao Aug 2019

Optical Transportation And Accumulation Of Microparticles By Self-Accelerating Cusp Beams, Weiwei Liu, Xiaodong Yang, Jie Gao

Xiaodong Yang

Most of the self-accelerating beams have monotonous single-channel bending structures, which greatly limit their applications in many fields such as microscopic imaging and particle manipulation. In this paper, the self-accelerating cusp beams with variable numbers of multichannel bending structures are generated to demonstrate the optical transportation and accumulation of micrometer polystyrene particles. The transportation velocity and optical force profiles of the microparticles moving along the bending channels of cusp beams are analyzed. Parallel particle transportation and particle accumulation manipulation from all the bending channels are further demonstrated. These results will inspire a lot of promising applications for self-accelerating beams especially ...


Generation Of Nondiffracting Vector Beams With Ring-Shaped Plasmonic Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao Aug 2019

Generation Of Nondiffracting Vector Beams With Ring-Shaped Plasmonic Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao

Xiaodong Yang

Nondiffracting Bessel, Mathieu, and Weber vector beams are generated by using ring-shaped plasmonic geometric metasurfaces. The nondiffracting vector beam is produced by the superposition of two off-axis right-handed and left-handed circularly polarized nondiffracting scalar beams described by the Whittaker integral, which are simultaneously generated by a single metasurface with the ring-shaped phase profile. The polarization states of the generated nondiffracting vector beams are analyzed by the Stokes parameters and the orbital angular momentum states are measured by the beam interference. In addition, the selfhealing properties of nondiffracting vector beams are further demonstrated, showing that not only the beam profiles but ...


A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, And Material Testing For Component Remanufacturing, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou Aug 2019

A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, And Material Testing For Component Remanufacturing, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou

Frank W. Liou

Metallic components can gain defects such as dents, cracks, wear, heat checks, deformation, etc., that need to be repaired before reinserting into service for extending the lifespan of these parts. In this study, a hybrid process was developed to integrate reverse engineering, pre-repair processing, additive manufacturing, and material testing for the purpose of part remanufacturing. Worn components with varied defects were scanned using a 3D scanner to recreate the three-dimensional models. Pre-repair processing methods which include pre-repair machining and heat-treatment were introduced. Strategies for pre-repair machining of defects including surface impact damage, surface superficial damage and cracking were presented. Pre-repair ...


Fabrication Of Alcocrfeni High-Entropy Alloy Coating On An Aisi 304 Substrate Via A Cofe₂Ni Intermediate Layer, Wenyuan Cui, Sreekar Karnati, Xinchang Zhang, Elizabeth Burns, Frank W. Liou Aug 2019

Fabrication Of Alcocrfeni High-Entropy Alloy Coating On An Aisi 304 Substrate Via A Cofe₂Ni Intermediate Layer, Wenyuan Cui, Sreekar Karnati, Xinchang Zhang, Elizabeth Burns, Frank W. Liou

Frank W. Liou

Through laser metal deposition, attempts were made to coat AlCoCrFeNi, a high-entropy alloy (HEA), on an AISI 304 stainless steel substrate to integrate their properties. However, the direct coating of the AlCoCrFeNi HEA on the AISI 304 substrate was found to be unviable due to cracks at the interface between these two materials. The difference in compositional change was suspected to be the source of the cracks. Therefore, a new transition route was performed by coating an intermediate layer of CoFe2Ni on the AISI 304 substrate. Investigations into the microstructure, phase composition, elemental composition and Vickers hardness were ...


On The Feasibility Of Tailoring Copper-Nickel Functionally Graded Materials Fabricated Through Laser Metal Deposition, Sreekar Karnati, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk Aug 2019

On The Feasibility Of Tailoring Copper-Nickel Functionally Graded Materials Fabricated Through Laser Metal Deposition, Sreekar Karnati, Yunlu Zhang, Frank W. Liou, Joseph William Newkirk

Frank W. Liou

In this study, pulse‐width modulation of laser power was identified as a feasible means for varying the chemical gradient in copper—nickel‐graded materials. Graded material deposits of 70 wt. %. copper‐30 wt. %. nickel on 100 wt. %. nickel and vice versa were deposited and characterized. The 70/30 copper—nickel weight ratio in the feedstock powder was achieved through blending elemental copper and 96 wt. %. Ni—Delero‐22 alloy. At the dissimilar material interface over the course of four layers, the duty cycle of power was ramped down from a high value to optimized deposition conditions. This change was ...


Accelerated Freezing Due To Droplet Pinning On A Nanopillared Surface, Rachel Bohm, Mohammad Rejaul Haque, Chuang Qu, Edward C. Kinzel, Amy Rachel Betz Aug 2019

Accelerated Freezing Due To Droplet Pinning On A Nanopillared Surface, Rachel Bohm, Mohammad Rejaul Haque, Chuang Qu, Edward C. Kinzel, Amy Rachel Betz

Edward C. Kinzel

The freezing process is significantly influenced by environmental factors and surface morphologies. At atmospheric pressure, a surface below the dew and freezing point temperature for a given relative humidity nucleates water droplets heterogeneously on the surface and then freezes. This paper examines the effect of nanostructured surfaces on the nucleation, growth, and subsequent freezing processes. Microsphere Photolithography (MPL) is used to pattern arrays of silica nanopillars. This technique uses a self-assembled lattice of microspheres to focus UV radiation to an array of photonic jets in photoresist. Silica is deposited using e-beam evaporation and lift-off. The samples were placed on a ...


Pore Elimination Mechanisms During 3d Printing Of Metals, S. Mohammad H. Hojjatzadeh, Niranjan D. Parab, Wentao Yan, Lianyi Chen Aug 2019

Pore Elimination Mechanisms During 3d Printing Of Metals, S. Mohammad H. Hojjatzadeh, Niranjan D. Parab, Wentao Yan, Lianyi Chen

Lianyi Chen

Laser powder bed fusion (LPBF) is a 3D printing technology that can print metal parts with complex geometries without the design constraints of traditional manufacturing routes. However, the parts printed by LPBF normally contain many more pores than those made by conventional methods, which severely deteriorates their properties. Here, by combining in-situ high-speed high-resolution synchrotron x-ray imaging experiments and multi-physics modeling, we unveil the dynamics and mechanisms of pore motion and elimination in the LPBF process. We find that the high thermocapillary force, induced by the high temperature gradient in the laser interaction region, can rapidly eliminate pores from the ...


Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen Jul 2019

Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen

Carmen Gomes

A multi-step approach is described for the fabrication of multi-layer graphene-based electrodes without the need for ink binders or post-print annealing. Graphite and nanoplatelet graphene were chemically exfoliated using a modified Hummers’ method and the dried material was thermally expanded. Expanded materials were used in a 3D printed mold and stamp to create laminate electrodes on various substrates. The laminates were examined for potential sensing applications using model systems of peroxide (H2O2) and enzymatic glucose detection. Within the context of these two assay systems, platinum nanoparticle electrodeposition and oxygen plasma treatment were examined as methods for improving sensitivity. Electrodes made ...


Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen Jul 2019

Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen

Jonathan C. Claussen

A multi-step approach is described for the fabrication of multi-layer graphene-based electrodes without the need for ink binders or post-print annealing. Graphite and nanoplatelet graphene were chemically exfoliated using a modified Hummers’ method and the dried material was thermally expanded. Expanded materials were used in a 3D printed mold and stamp to create laminate electrodes on various substrates. The laminates were examined for potential sensing applications using model systems of peroxide (H2O2) and enzymatic glucose detection. Within the context of these two assay systems, platinum nanoparticle electrodeposition and oxygen plasma treatment were examined as methods for improving sensitivity. Electrodes made ...


Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen Jul 2019

Stamped Multilayer Graphene Laminates For Disposable In-Field Electrodes: Application To Electrochemical Sensing Of Hydrogen Peroxide And Glucose, Loreen R. Stromberg, John A. Hondred, Delaney Sanborn, Deyny Mendivelso-Perez, Srikanthan Ramesh, Iris V. Rivero, Josh Kogot, Emily Smith, Carmen Gomes, Jonathan C. Claussen

Emily Smith

A multi-step approach is described for the fabrication of multi-layer graphene-based electrodes without the need for ink binders or post-print annealing. Graphite and nanoplatelet graphene were chemically exfoliated using a modified Hummers’ method and the dried material was thermally expanded. Expanded materials were used in a 3D printed mold and stamp to create laminate electrodes on various substrates. The laminates were examined for potential sensing applications using model systems of peroxide (H2O2) and enzymatic glucose detection. Within the context of these two assay systems, platinum nanoparticle electrodeposition and oxygen plasma treatment were examined as methods for improving sensitivity. Electrodes made ...


Computational Cardiovascular Flow Analysis With The Variational Multiscale Methods, Kenji Takizawa, Yuri Bazilevs, Tayfun E. Tezduyar, Ming-Chen Hsu Jul 2019

Computational Cardiovascular Flow Analysis With The Variational Multiscale Methods, Kenji Takizawa, Yuri Bazilevs, Tayfun E. Tezduyar, Ming-Chen Hsu

Ming-Chen Hsu

Computational cardiovascular flow analysis can provide valuable information to medical doctors in a wide range of patientspecific cases, including cerebral aneurysms, aortas and heart valves. The computational challenges faced in this class of flow analyses also have a wide range. They include unsteady flows, complex cardiovascular geometries, moving boundaries and interfaces, such as the motion of the heart valve leaflets, contact between moving solid surfaces, such as the contact between the leaflets, and the fluid–structure interaction between the blood and the cardiovascular structure. Many of these challenges have been or are being addressed by the Space–Time Variational Multiscale ...


Bulk-Explosion-Induced Metal Spattering During Laser Processing, Cang Zhao, Qilin Guo, Xuxiao Li, Niranjan Parab, Kamel Fezzaa, Wenda Tan, Lianyi Chen, Tao Sun Jul 2019

Bulk-Explosion-Induced Metal Spattering During Laser Processing, Cang Zhao, Qilin Guo, Xuxiao Li, Niranjan Parab, Kamel Fezzaa, Wenda Tan, Lianyi Chen, Tao Sun

Lianyi Chen

Spattering has been a problem in metal processing involving high-power lasers, like laser welding, machining, and recently, additive manufacturing. Limited by the capabilities of in situ diagnostic techniques, typically imaging with visible light or laboratory x-ray sources, a comprehensive understanding of the laser-spattering phenomenon, particularly the extremely fast spatters, has not been achieved yet. Here, using MHz single-pulse synchrotron-x-ray imaging, we probe the spattering behavior of Ti-6Al-4V with micrometer spatial resolution and subnanosecond temporal resolution. Combining direct experimental observations, quantitative image analysis, as well as numerical simulations, our study unravels a novel mechanism of laser spattering: The bulk explosion of ...


Developing A Workflow To Integrate Tree Inventory Data Into Urban Energy Models, Farzad Hashemi, Breanna L. Marmur, Ulrike Passe, Janette R. Thompson Jun 2019

Developing A Workflow To Integrate Tree Inventory Data Into Urban Energy Models, Farzad Hashemi, Breanna L. Marmur, Ulrike Passe, Janette R. Thompson

Farzad Hashemi

Building energy simulation is of considerable interest and benefit for architects, engineers, and urban planners. Only recently has it become possible to develop integrated energy models for clusters of buildings in urban areas. Simulating energy consumption of the built environment on a relatively large scale (e.g., such as a neighborhood) will be necessary to obtain more reliable results, since building energy parameters are influenced by characteristics of the nearby environment. Therefore, the construction of a 3-D model of urban built areas with detail of the near-building environment should enhance simulation approaches and provide more accurate results. This paper describes ...


Use Of Automated Machine Guidance Within The Transportation Industry, David J. White, Charles T. Jahren, Pavana Vennapusa, Caroline Westort, Ahmad A. Alhasan, Yelda Turkan, Fangyu Guo, John Hannon, Adam Dubree, Tulio Sulbaran Jun 2019

Use Of Automated Machine Guidance Within The Transportation Industry, David J. White, Charles T. Jahren, Pavana Vennapusa, Caroline Westort, Ahmad A. Alhasan, Yelda Turkan, Fangyu Guo, John Hannon, Adam Dubree, Tulio Sulbaran

Caroline Westort

Automated machine guidance (AMG) links sophisticated design software with construction equipment to direct the operations of construction machinery with a high level of precision, and improve the speed and accuracy of the construction process. AMG technology has the potential to improve the overall quality, safety, and efficiency of transportation project construction. This research project was undertaken to study AMG implementation barriers and develop strategies for effective implementation of AMG technology in construction operations. Early in the research effort, an expert contact group was established to obtain perspectives from agencies, contractors, designers, and equipment manufacturers. An AMG workshop was conducted to ...


Crowdsourcing Image Analysis For Plant Phenomics To Generate Ground Truth Data For Machine Learning, Naihui Zhou, Zachary D. Siegel, Scott Zarecor, Nigel Lee, Darwin A. Campbell, Carson M. Andorf, Dan Nettleton, Carolyn J. Lawrence-Dill, Baskar Ganapathysubramanian, Jonathan W. Kelly, Iddo Friedberg Jun 2019

Crowdsourcing Image Analysis For Plant Phenomics To Generate Ground Truth Data For Machine Learning, Naihui Zhou, Zachary D. Siegel, Scott Zarecor, Nigel Lee, Darwin A. Campbell, Carson M. Andorf, Dan Nettleton, Carolyn J. Lawrence-Dill, Baskar Ganapathysubramanian, Jonathan W. Kelly, Iddo Friedberg

Dan Nettleton

The accuracy of machine learning tasks critically depends on high quality ground truth data. Therefore, in many cases, producing good ground truth data typically involves trained professionals; however, this can be costly in time, effort, and money. Here we explore the use of crowdsourcing to generate a large number of training data of good quality. We explore an image analysis task involving the segmentation of corn tassels from images taken in a field setting. We investigate the accuracy, speed and other quality metrics when this task is performed by students for academic credit, Amazon MTurk workers, and Master Amazon MTurk ...


Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen Jun 2019

Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen

Jonathan C. Claussen

Porous carbon is becoming an important and promising high-surface area scaffold material for various energy-based applications including catalysis. Here we demonstrate the growth of urchin-like platinum nanoparticles (PtNPs) on carbon monoliths derived from basswood that work as catalysts for micro underwater vehicle (MUV) propulsion via H2O2 decomposition. The carbon monoliths were constructed of natural basswood that was carbonized in argon (Ar) and subjected to a subsequent CO2 activation process that rendered the material into a hardened 3D porous activated carbonized wood (ACW) with inner channel voids measuring 10-70 μm in diameter. The PtNP nanourchins (500 nm or less in total ...


Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen Jun 2019

Porous Wood Monoliths Decorated With Platinum Nano-Urchins As Catalysts For Underwater Micro-Vehicle Propulsion Via H2o2 Decomposition, Bolin Chen, Ahmed Gsalla, Anand Gaur, Yu Hui Lui, Xiaohui Tang, Jason Geder, Marius Pruessner, Brian J. Melde, Igor L. Medintz, Behrouz Shafei, Shan Hu, Jonathan C. Claussen

Shan Hu

Porous carbon is becoming an important and promising high-surface area scaffold material for various energy-based applications including catalysis. Here we demonstrate the growth of urchin-like platinum nanoparticles (PtNPs) on carbon monoliths derived from basswood that work as catalysts for micro underwater vehicle (MUV) propulsion via H2O2 decomposition. The carbon monoliths were constructed of natural basswood that was carbonized in argon (Ar) and subjected to a subsequent CO2 activation process that rendered the material into a hardened 3D porous activated carbonized wood (ACW) with inner channel voids measuring 10-70 μm in diameter. The PtNP nanourchins (500 nm or less in total ...