Electrical and Electronics Commons^™

Restorative Hand Therapy Exercise Using Iot-Based Flex Force Smart Glove, Yi Neng Chang, Mohamad Khairi Ishak, Khalid Ammar

Makara Journal of Technology

Stroke has long been a major health concern in Malaysia, with cerebrovascular disease accounting for one-third of all deaths. Patients who have had a stroke have varying degrees of movement impairment, which can be improved with physiotherapy. A smart glove system is proposed in this paper to measure and visualize patient finger flexes in real-time remotely and record these flexes for further analysis to monitor and assess patient physiotherapy sessions. The system is designed to help physiotherapists evaluate physiotherapy exercises of patients and provide detailed information regarding the rehabilitation process. This paper also includes performance analysis and data from physiotherapy …

The Magnetic Chain Mathematical Models Of A New Angular Displacement Converter With A Variable Active Area Of A Movable Core, Sultan Faizullayevich Аmirov, Ulugbek Shukhratovich Mamadaliyev, Islom Azim Ugli Karimov

Chemical Technology, Control and Management

The article develops mathematical models of the magnetic chain of new differential type angular displacement transformer converter with a variable active area of the movable core, in which the width of the movable ferromagnetic core is a function of the angular displacement of the converter. In this case, the magnetic chain of the converter, divided into three characteristic (before the mobile ferromagnetic core, ferromagnetic core and after the ferromagnetic core) sections, is considered as a magnetic chain with distributed parameters. It is established that when the magnetic resistance of the magnetic chain steel part is not taken into account, the …

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Design And Development Of A Solar Module Health Monitoring Device, Elijah Madaris, Christopher Baden, Sandip Das

Symposium of Student Scholars

Solar power has emerged as a promising renewable clean energy source and installations of solar panels are increasing sharply year after year. Monitoring the power output and health of solar panels is critically important to ensure safe and reliable operation of a solar power plant throughout its operational lifetime. In this project, we have designed and built a low-cost electronic device that is capable of measuring the electrical parameters of a solar cell or module. The device consists of a microprocessor with integrated analog-to-digital converter, a supercapacitor bank, current sense amplifier, and electromechanical relays. The microprocessor performs data acquisition through …

Portable Diffuse Reflectance Spectroscopy For Non-Invasive And Quantitative Assessment Of The Parathyroid Glands Viability During Surgery, Mark Romine, Linh Luong, Alex Moazzen, Katie Cho, Paul Lee

Symposium of Student Scholars

Portable Diffuse Reflectance Spectroscopy for Non-invasive and Quantitative Assessment of the Parathyroid Glands Viability During Surgery

Mark Romine, Linh Luong, Alex Moazzen, Katie Cho and Paul Lee

The parathyroid glands (PTGs) are responsible for the regulation of calcium levels in the blood by secreting a parathyroid hormone. This parathyroid hormone then regulates the body’s absorption, storage, and secretion of calcium, which can directly affect the way muscles and nerves operate. PTGs are often at risk of damage, or accidental removal during thyroid surgeries, because it is challenging to identify PTGs and to determine their viability. Current methods of visual inspections …

Premium Single Phase Motor For Abb Group, Daniel Johnson, Sky Friar, Jesse Willer

ATU Scholars Symposium

ABB Group is in search of a next generation premium single phase motor. An integrated drive paired to a three phase motor will allow the company to take advantage of current three phase motor automation capacity while presenting the end user with a simple, ready to use motor operating off of single phase power. This project is the design of such an integrated drive.

The drive will accept 115/230 Vac, single phase supply power and send it through a full bridge rectifying, voltage doubling circuit. This circuit will rectify the alternating current to direct current and increase the voltage to …

Discriminating Wirelesshart Communication Devices Using Sub-Nyquist Stimulated Responses, Jeffrey D. Long, Michael A. Temple, Christopher M. Rondeau

Faculty Publications

Reliable detection of counterfeit electronic, electrical, and electromechanical devices within critical information and communications technology systems ensures that operational integrity and resiliency are maintained. Counterfeit detection extends the device’s service life that spans manufacture and pre-installation to removal and disposition activity. This is addressed here using Distinct Native Attribute (DNA) fingerprinting while considering the effects of sub-Nyquist sampling on DNA-based discrimination. The sub-Nyquist sampled signals were obtained using factor-of-205 decimation on Nyquist-compliant WirelessHART response signals. The DNA is extracted from actively stimulated responses of eight commercial WirelessHART adapters and metrics introduced to characterize classifier performance. Adverse effects of sub-Nyquist decimation …

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Evaluation Of The Dynamic Vision Sensor’S Photoreceptor Circuit For Infrared Event-Based Sensing, Zinah M. Alsaad

Electrical and Computer Engineering ETDs

For space surveillance applications, neuromorphic imaging is being studied as it may perform sensing and tracking tasks with less power and downstream datalink demand. The read-out of the event-based camera is made to only be sensitive to changes in the signals it receives from the photodetector, which results in a datastream of events indicating where and when changes in illumination occur. This is in contrast to the conventional framing camera, which produces images by essentially counting the electrons produced by light incident on each pixel’s photodetector. These cameras are commercially available with siliconbased detectors for applications involving visible wavelengths. However, …

Creating A Power System For A Robot, Nolan Hays

Scholars Week

I will be describing the process of creating the power system for the robot that will be competing in the 2023 IEEE Hardware Competition.

Coordinated Location And Capacity Planning Of Fast Charging Stations For Electric Vehicles Using Multi Objective Approach, Asna Madathodika

Dissertations

With the growing concerns on the energy depletion and CO₂ emissions, electric vehicles (EVs) have marked a new paradigm in the transport sector. Installation of publicly accessible charging stations (CS), namely fast CSs are crucial for the large-scale deployment of EVs. However, randomly placing CSs without prior research affect EV owners, CS operators and grid operators. For instance, the location and size of charging stations affect the accessibility and convenience of EV users since users prefer charging stations that are easier to access without much traffic congestion in road networks. At the same time station should offer good service …

Capturing Maximum Photovoltaic Power With Machine Learning: Maximum Current Prediction, Mppt Methodology, And Adjustable Ml-Based Controller, Zahi Mohamed Mohamed

Dissertations

The primary aim of this doctoral thesis is to examine the potential application of machine learning (ML) in optimizing Maximum Power Point Tracking (MPPT) and devising a flexible ML-based controller for photovoltaic (PV) systems. The lack of MPPT mechanisms leads to fixed voltage and current points for PV modules, resulting in substantial power loss when environmental conditions vary. The limitations of conventional and enhanced MPPT methods, as well as finding an alternative controller to classical Proportional-Integral (PI) controllers, have spurred the search for substitute approaches to maximize PV power. To address these limitations, this thesis proposes using ensemble ML techniques, …

Pvpbc: Privacy- And Verifiability-Preserving E-Voting Based On Permissioned Blockchain, Muntadher Sallal, Ruairí De Fréin, Ali Malik

Articles

Privacy and verifiability are crucial security requirements in e-voting systems and combining them is considered to be a challenge given that they seem to be contradictory. On one hand, privacy means that cast votes cannot be traced to the corresponding voters. On the other hand, linkability of voters and their votes is a requirement of verifiability which has the consequence that a voter is able to check their vote in the election result. These two contradictory features can be addressed by adopting privacy-preserving cryptographic primitives, which at the same time as achieving privacy, achieve verifiability. Many end-to-end schemes that support …

Unsupervised Learning Algorithm For Noise Suppression And Speech Enhancement Applications, Abdullah Zaini Alsheibi

Electronic Theses and Dissertations

Smart and intelligent devices are being integrated more and more into day-to-day life to perform a multitude of tasks. These tasks include, but are not limited to, job automation, smart utility management, etc., with the aim to improve quality of life and to make normal day-to-day chores as effortless as possible. These smart devices may or may not be connected to the internet to accomplish tasks. Additionally, human-machine interaction with such devices may be touch-screen based or based on voice commands. To understand and act upon received voice commands, these devices require to enhance and distinguish the (clean) speech signal …

Assessing Hardware Security Threats Posed By Hardware Trojans In Power Electronics, Quinn Kinzie

All Theses

This study investigates the threat of hardware Trojans (HTs) in power electronics applications, a rising concern due to the growing demand for cost-effective embedded solutions in power systems. With the supply chain for electronic hardware devices expanding globally, particularly to low-cost foundries in foreign locations, there is an increasing risk of HT attacks. While there has been extensive research on HTs in computer applications, little consideration has been given to their threat in power electronics. This study demonstrates the effectiveness of a power electronics HT by implementing a novel HT design into a gate drive circuit. Additionally, the research proposes …

Design Of A Miniaturized Cubesat Tt&C Patch Antenna, Thomas A. Butterick

Theses and Dissertations

This effort explored the design of miniaturized rectangular microstrip patch antennas for application as a telemetry, tracking, and control (TT&C) on a CubeSat. The motivation for this research was the Grissom-P CubeSat mission planned by AFIT. The TT&C antenna selected for the mission exceeded the allotted size by over a factor of two. The studies performed included analyses of simply reducing aperture size, altering substrate permittivity, and layered approaches to antenna miniaturization. The primary approach to miniaturization was based on a virtually shorted patch antenna. Other approaches included an edge-shorted, slotted patch and the use of corner truncations for improved …

Effects Of Calibration Errors On Dropped-Channel Polarimetric Synthetic Aperture Radar, Jacob C. Morrison

Theses and Dissertations

Compressed Sensing (CS) is a mathematical technique that can be applied to sparse data sets to allow for sub-Nyquist sampling. DCPCS is a CS technique that recovers the signal from unmeasured polarisation channels due to antenna crosstalk coupling the information onto the remaining channels. DCPCS reduces data storage/transmission and receiver hardware requirements. This thesis examines the robustness of DCPCS to calibration errors on the antenna crosstalk matrix. Although the antenna design problem is relaxed to a large region of acceptable crosstalk values, very accurate calibration may be required in a monostatic radar. This thesis also looks at the importance of …

Robust Feature Matching For Visual-Based Aerial Navigation Using Registered Imagery, Luis Montenegro

Theses and Dissertations

This work leverages the SIFT detector along with known robust feature matching techniques for vision-aided sUAS navigation solutions. The proposed algorithm focuses on a sufficient number of features extracted, their quality and their distribution.

Classifying Open-Air Target Measurements Using Simulation-Trained Convolutional Neural Networks, Matthew M. Rofrano

Theses and Dissertations

This research focuses on the development of machine learning networks that can identify and classify airborne targets using their radar cross section response. Simulation and measurement data for five targets was collected using Altair's CadFEKO software, and the Air Force Institute's Compact Radar Range. Three machine learning models were trained using simulation data, and evaluated using the collected measurement data. Variability is introduced to the training data by applying random gaussian noise to simulation results. Gaussian noise is added to the measurement data prior to evaluation in-order to model "hostile noise jamming." Network performance is measured against a baseline performance …

Comparison Of Federated Kalman Filter And Autonomous Resilient Management Of All-Source Sensors (Armas) Framework For Fault Detection And Exclusion, Flavio Fernandes

Theses and Dissertations

In recent times, there is a great demand for resilient and robust PNT solutions. Current navigation systems rely heavily on GNSS to provide this solution. This dependence is a major concern and therefore it is prudent to use additional aids to provide the best solution possible. However, traditional methods to address this need require a nontrivial number of Kalman filters to maintain a fault-free solution. The federated filter approach provides an attractive alternative to the current solutions. In this thesis, we examine the use of the federated filter design to address this need in today’s integrated navigation systems. We compared …

Detection And Identification Of Covert Devices Using Infrared And Stacked Optics Detection, Michael A. Reyneke

Theses and Dissertations

This work investigates stacked optics detection methodologies to successfully detect and identify observational systems with a cyber-physical sensing tool, ODIN (Observational Device Identification Network). ODIN successfully detected the presence of stacked optics and LiDAR systems using night-vision devices with a 96.32% average accuracy rating, both overt and covertly placed, with objective lens diameters ranging from 17 mm to 50 mm at distances between 1 m to 5 m with and without commonly employed anti-reflective countermeasures. ODIN provides a foundation for counter- measure capabilities of NIR devices and stacked optical systems in stationary environments. Additionally, a pilot study on smartphone LiDAR …

Optimal Energy Management For Off-Grid Hybrid Renewable Energy Systems, Owdean M. Suwi

Tanzania Journal of Engineering and Technology (TJET)

A photovoltaic (PV)/wind/battery/Generator-Set hybrid power system's energy dispatch is discussed in this research, along with the ideal solution. The optimization model enables the hybrid power system's generating devices to share power appropriately. The main goals are to minimize fuel consumption and costs and maximize the usage of Renewable Energy Sources (RES). The proposed simulation plan succeeds in lowering fuel costs because the diesel generator only kicks on at night and in the early morning when the energy from RES is insufficient to supply the load. The load is supplied with power, and the battery is charged throughout the day, when …

Development Of Solar Pv Systems For Mini-Grid Applications In Tanzania, Seleman Mayanjo

Tanzania Journal of Engineering and Technology (TJET)

Access to electricity offers great benefits to development through the provision of reliable and efficient energy sources in the country. Majority of the population living in the remote and rural areas of developing countries mostly sub-Saharan Africa are not supplied with electricity. Although the governments through their electricity companies put their effort to extends the grid distribution networks to remote and rural areas still the coverage were not sufficiently enough due to growing demands for safe and reliable electricity. However, solar as a source of energy remains the least utilized energy source in many countries including Tanzania. Solar Photovoltaic (PV) …

Studying Dielectric Losses Of Serially Combined Silicone Rubber And Epoxy Resin, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

High voltage outdoor insulation systems are conventionally ceramics and glass with several advantages, such as proven in the field, excellent dielectric properties, durability, and long life. However, they are heavy, attract vandals and break easily, and they can lose their dielectric properties easily when subjected to high voltage transients, arcing, and surges. To curb this, polymer insulators are used because they have excellent dielectric properties, such as those of ceramics and glass, with the added advantages that they do not break easily and recover their lost dielectric properties after any electrical transients. Therefore, this paper investigates the dielectric properties of …

Comparison Of On-Line Partial Discharge Detection Techniques For High Voltage Power Cable Joints And Terminations, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Cable joints and terminations play a vital role in providing dependable electrical connection, mechanical support and physical safeguard. These provide electrical stress control to shielded power cables. Despite their usefulness, they suffer from partial discharges (PD) because of enhanced voltage stress, moisture ingress and poor workmanship (during installation). Therefore, it is necessary to undertake on-line PD detection to determine their state. Some of these techniques are capacitive coupler (CC); acoustic emission (AE); and high frequency current transducer (HFCT). This article presents a literature review of these techniques based on the cost, availability, and applicability. The comparative analysis is also provided …

Semiconductor Devices, Sheila D. Hill Pe

KSU Distinguished Course Repository

3 Class Hours, 0 Laboratory Hours, 3 Credit Hours Prerequisites: CHEM 1211, CHEM 1211L, EE 1000
This course effectively applies the knowledge of chemistry and physics to understand the operating principles of various semiconductor devices. The course covers topics starting from the fundamental concepts of atomic and crystal structure, crystal growth, impurity doping and energy bands to the in-depth device operation and quantitative analysis of p-n junction diode, metal-semiconductor contacts and Schottky diode, BJTs and MOSFETs. Also fundamental operating principles of optoelectronic devices such as, LEDs and photodiodes are discussed. Simple device simulation components reinforces the understanding of various critical …

Zno Varistors – The Ideal Microstructure And Characteristics, And Methods Investigated And Developed To Achieve These, Maura Kelleher

Books/Book Chapters

ZnO-Bi2O3-Sb2O3 varistors have been extensively studied since their discovery 5 decades ago. Their function in protecting increasingly sensitive electronic components by absorbing random surges of energy is even more important today. Also, the metal oxides from which they are made from are becoming even more precious. Their electrical characteristics are highly dependent on their microstructural characteristics which are highly dependent on their composition and methods used. The purpose of this article is to explain the ideal microstructure required to obtain the ideal electrical characteristics, the powder preparation methods investigated and developed to achieve it, and some future directions are outlined.

Comparing The Iwl-Mvm-Rs And Minstrel-Ht Rate Adaptation Algorithms Under Different Local Error Conditions, Luhan Wang, Mark Davis

Conference papers

WLAN technology has grown rapidly and now provides increasingly reliable and fast wireless connectivity. A number of Rate Adaptation Algorithms (RAAs) which are designed to select the optimal line rate according to the channel conditions have been proposed. Iwl-Mvm-Rs RAA which is implemented in the Intel wireless chips and Minstrel-HT RAA which is implemented in the Linux kernels are two such well known algorithms. Many existing papers evaluate these two algorithms with regard to device mobility and signal fading. However, the causes of frame errors can be divided into two categories: weak signal reception and collisions. Therefore, in this paper, …

Simultaneous Measurement Of Gas Pressure And Temperature Using A Microbubble Resonator Combined With An Fbg, Ketan Dong, Ke Tian, Chuanzhen Zhao, Huibin Li, Jibo Yu, Angzhen Li, Xiaoling Sun, Elfed Lewis, Gerald Farrell, Pengfei Wang

Conference Papers

We propose and demonstrate a microbubble resonator combined with a fiber Bragg grating (FBG) for simultaneous measurement of gas pressure and temperature. The approach used allows for very close proximity (<200 >μm) between the FBG and the microbubble resonator. The microbubble resonator is fabricated in a section of hollow-core fiber (HCF), spliced to a single-mode fiber (SMF) with a pre-inscribed FBG to form a single-ended open structure. Fresnel reflection from the HCF cleaved end means that broadband light is reflected backwards in the same direction as the Bragg wavelength from the FBG. A tapered fiber couples the reflected broadband light …

Towards Explainable Ai Using Attribution Methods And Image Segmentation, Garrett J. Rocks

Honors Undergraduate Theses

With artificial intelligence (AI) becoming ubiquitous in a broad range of application domains, the opacity of deep learning models remains an obstacle to adaptation within safety-critical systems. Explainable AI (XAI) aims to build trust in AI systems by revealing important inner mechanisms of what has been treated as a black box by human users. This thesis specifically aims to improve the transparency and trustworthiness of deep learning algorithms by combining attribution methods with image segmentation methods. This thesis has the potential to improve the trust and acceptance of AI systems, leading to more responsible and ethical AI applications. An exploratory …