Electrical and Electronics Commons^™

Batteryless Nfc-Enabled Wireless Sensor Node: Design, Optimization, And Implementation, Rishin Patra

Dissertations, Master's Theses and Master's Reports

This thesis presents the design, construction, and testing of a batteryless Near-field communication (NFC) powered wireless sensor node intended for maintenance free, short range Internet of Things (IoT) applications. The work focuses on harvesting energy from a 13.56 MHz NFC field to power a very low-power sensing platform capa- ble of measuring temperature, pressure, and humidity without the use of batteries or wired power. The motivation behind this approach is the growing need for reliable, sustainable, and low-maintenance sensing systems that can operate in environments where battery replacement is impractical, undesirable, or environmentally costly. The prototype is built around a …

Implementing Associative Learning Using Neuromorphic Robot, Vinay Kumar Pillalamarri

Dissertations, Master's Theses and Master's Reports

Associative learning, a key cognitive process seen across the animal kingdom, enables organisms to form connections between stimuli and adapt their behaviors based on past experiences. A particularly powerful example is fear conditioning, where animals learn to associate a neutral stimulus with an aversive one, allowing them to predict and avoid potential threats. Inspired by this mechanism, this project implements associative learning on an unmanned ground vehicle (UGV) to develop adaptive behavior through neuromorphic principles. Utilizing Nengo for neural modeling, the UGV learns to associate visual (red color) and tactile (vibration) stimuli through Hebbian learning, a biologically inspired synaptic adaptation …

Developing Robust Autonomous Vehicles With Ros, Dylan J. Kangas

Dissertations, Master's Theses and Master's Reports

The demand for autonomous vehicles (AVs) is rising across both military and civilian sectors. These unmanned systems offer numerous advantages, such as improved efficiency, safety, and adaptability. Addressing this demand requires the development of resilient and versatile autonomous vehicles crucial for the transport and reconnaissance markets.

The sensory perception of autonomous vehicles of any kind is paramount to their ability to navigate and localize in their environment. Factors such as sensor noise, erroneous readings, and deliberate attacks should all be considered when developing a robust autonomous system. This work aims to quantify the degradation of sensor data which causes mapping …

Development And Verification Of Automated Fixtures For Functional Testing Of Space Grade Printed Circuit Board Assemblies, Nicholas A. Wylie

Dissertations, Master's Theses and Master's Reports

Orbion Space Technology is a developer and manufacturer of electric propulsion systems for military and commercial spacecraft. Orbion’s products include a Power Processing Unit (PPU) which is utilized for power and control of the satellite propulsion system. These PPUs are complex electro-mechanical assemblies that include multiple Printed Circuit Board Assemblies (PCBA) and are built to IPC standards. To ensure smooth fabrication and to reduce the risk of complications from in-process rework of PCBAs, comprehensive electrical functional testing at the board-level is required before higher- level assembly. Electrical functional testing provides verification of quality, workmanship, and manufacturing defects of the PCBAs. …

Self-Oscillating Induction Heater, Patrick Rice

Dissertations, Master's Theses and Master's Reports

This report develops a control system to keep an induction heater in resonance. When a metallic workpiece is inserted in the air core of the workcoil, the resonant frequency changes. Different workpiece materials affect the resonant frequency and power. This presents a problem since changing the resonant frequency of the circuit while keeping the frequency constant reduces the maximum power of the circuit. Finite element analysis is used to find the circuit parameters of the workcoil and workpiece interaction. A non-linear controller which oscillates based on the resonant frequency of an LC tank is created. Nyquist and describing function analysis …

Hardware In The Loop Implementation And Simulations Of A Wave Energy Converter Using Typhoon Hil And Speedgoat, Pranav Nair

Dissertations, Master's Theses and Master's Reports

Several studies have indicated that electricity production is the prime source of greenhouse emissions, more than flying and driving combined. Hence, over the past few decades, there has been a significant rise in the need for clean energy to achieve the targets in emissions reduction. It has been observed that the share of renewable energy sources in the percentage of total electricity production is rising, but, according to climate experts, the transition needs to speed up. Hence, it is significant to study and develop underutilized renewable energy sources.

One of these underutilized renewable energy sources is wave energy. It has …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Open-Source Tig-Based Metal 3d-Printing, Shane Oberloier

Dissertations, Master's Theses and Master's Reports

Metal 3-D printing has been relegated to high-cost proprietary high-resolution systems and low-resolution low-cost metal inert gas (MIG) systems. In order to provide a path to high-resolution, low-cost, metal 3-D printing, this manuscript proposes a new open source metal 3-D printer design based around a low-cost tungsten inert gas (TIG) welder coupled to a commercial open source self replicating rapid prototyper. Optimal printing parameters for the machine are acquired using a novel computational intelligence software. TIG has many advantages over MIG, such as having a low heat input, clean beads, and the potential for both high-resolution prints as well as …

Sensor Fusion And Non-Linear Mpc Controller Development Studies For Intelligent Autonomous Vehicular Systems, Ahammad Basha Dudekula

Dissertations, Master's Theses and Master's Reports

The demand for safety and fuel efficiency on ground vehicles and advancement in embedded systems created the opportunity to develop Autonomous controller. The present thesis work is three fold and it encompasses all elements that are required to prototype the autonomous intelligent system including simulation, state handling and real time implementation. The Autonomous vehicle operation is mainly dependent upon accurate state estimation and thus a major concern of implementing the autonomous navigation is obtaining robust and accurate data from sensors. This is especially true, in case of Inertial Measurement Unit (IMU) sensor data. The IMU consists of a 3-axis gyro, …

Optimal Power Flow Control Of Networked Dc Microgrids, Eddy H. Trinklein

Dissertations, Master's Theses and Master's Reports

The US military is moving toward the electrification of many weapon systems and platforms. Advanced weapon systems such as high energy radar, electro-magnetic kinetic weapons and directed energy pose significant integration challenges due to their pulsed power electrical load profile. Additionally, the weapons platforms, including ships, aircraft, and vehicles can be studied as a mobile microgrids with multiple generation sources, loads, and energy storage. There is also a desire to extend the mission profile and capabilities of these systems. Common goals are to increase fuel efficiency, maintaining system stability, and reduce energy storage size as typically required to enable pulsed …

Networked Microgrid Optimization And Energy Management, Robert S. Jane

Dissertations, Master's Theses and Master's Reports

Military vehicles possess attributes consistent with a microgrid, containing electrical energy generation, storage, government furnished equipment (GFE), and the ability to share these capabilities via interconnection. Many military vehicles have significant energy storage capacity to satisfy silent watch requirements, making them particularly well-suited to share their energy storage capabilities with stationary microgrids for more efficient energy management. Further, the energy generation capacity and the fuel consumption rate of the vehicles are comparable to standard diesel generators, for certain scenarios, the use of the vehicles could result in more efficient operation. Energy management of a microgrid is an open area of …

Testing Of Recursive And Non-Recursive Algorithms For Real-Time Phasor And Frequency Estimations In Power Systems, Dhruv Sharma

Dissertations, Master's Theses and Master's Reports

Steady-state performance of various recursive and non-recursive algorithms are tested in this report according to the test signals given in the IEEE Standard C37.118.1-2011. Phase magnitude and phase angle of the power grid signals have been estimated using Discrete Fourier Transform (non-recursive), Discrete Fourier Transform (recursive), Least Square, and Wavelet Transform Algorithms. Frequency estimation is performed using Discrete Fourier Transform, Weighted Least Square, and Zero Crossing methods. These algorithms are evaluated in LabView software and tested by generating test signals in a Simulink model. Furthermore, Total Vector Error (TVE) is calculated using dynamic test signals as per the IEEE Standard …

Study Of Obstacle Effect On The Gpsr Protocol And A Novel Intelligent Greedy Routing Protocol For Vanets, Ravikumar Chilmula

Dissertations, Master's Theses and Master's Reports

In recent years, connected vehicle technologies have been developed by automotive companies, academia, and researchers as part of Intelligent Transportation Systems (ITS). This group of stakeholders continue to work on these technologies to make them as reliable and cost-effective as possible. This attention is because of the increasing connected vehicles safety-related, entertainment, and traffic management applications, which have the potential to decrease the number of road accidents, save fuel and time for millions of daily commuters worldwide.

Vehicular Ad-Hoc Network (VANET), which is a subgroup of Mobile Ad-Hoc Network (MANET), is being developed and implemented in vehicles as the critical …

Development Of Open Source Software And Hardware Tool-Chains For Novel Electronics, Shane Oberloier

Dissertations, Master's Theses and Master's Reports

3-D printing technologies have become widely adopted and have spurred innovation and efficiency across many markets. A large contributor to the success of 3-D printing are open source, low cost electronics. On-site circuit manufacturing, however, has not become as widely utilized as 3-D printing. This project attempts to address this problem by proposing and demonstrating an open source circuit board milling machine which is inexpensive, easily manufactured, and accurate. In three interdependent sub-projects, this thesis defines a standard method for designing open source hardware, the design of the bespoke circuit mill, and explores an application of the mill for novel …

Cyber-Based Contingency Analysis And Insurance Implications Of Power Grid, Zhiyuan Yang

Dissertations, Master's Theses and Master's Reports

Cybersecurity for power communication infrastructure is a serious subject that has been discussed for a decade since the first North American Electric Reliability Corporation (NERC) critical infrastructure protection (CIP) initiative in 2006. Its credibility on plausibility has been evidenced by attack events in the recent past. Although this is a "very high impact, rare probability" event, the establishment of quantitative measures would help asset owners in making a series of investment decisions. First, this dissertation tackles attackers' strategies based on the current communication architecture between remote IP-based (unmanned) power substations and energy control centers. Hypothetically, the identification of intrusion paths …

Energy Storage Control And Requirements For Inverter-Based Microgrids, Mehrzad Mohammadi Bijaieh

Dissertations, Master's Theses and Master's Reports

The intermittent nature of distributed renewable sources such as wind or solar requires integration of energy storage systems. In this dissertation a distributed form of the Hamiltonian Surface Shaping and Power Flow Control (HSSPFC) method is used to determine the energy storage requirements of three-phase inverter-based microgrids. The overall control is appropriate to be integrated into a hierarchical control system. As the primary control, a novel dq droop control sets the local references and is supported by a level-zero Hamiltonian controller which includes energy storage feed-forward and feedback, and an inverter feed-forward controls. Here, the energy storage element performs as …

Implantable Wireless Sensor Networks: Application To Measuring Temperature For In Vivo Detection Of Infections, Praharsh Madappaly Veetil

Dissertations, Master's Theses and Master's Reports

It is has been proven that infection in the body cause a local temperature increase due to localized inflammation. Therefore, a method to provide early diagnostic or long-term tracking of this infection will provide great benefits to patients with diabetic foot ulcers or sickle cell disease, and those receiving hemodialysis where they suffer from a weakened immune system. The goal of this project is to develop an implantable wireless temperature sensor based on a wireless sensor network system for monitoring infections in situ. The analog signals from the thermistors are digitized and wirelessly transmitted to a computer with an ez430-rf2500 …

Second-Life Battery Electrochemical Impedance Spectroscopy Modeling And Application To A Residential System, Busra Ovali

Dissertations, Master's Theses and Master's Reports

This study presents the modeling of a used hybrid electric vehicle battery (also called second life battery), and its design and simulation for a standalone residential photovoltaic system. For this purpose, the battery was tested through capacity and electrochemical impedance spectroscopy tests (EIS). These tests were done with variable temperatures (0ºC, 15ºC and 30ºC), and results were used to fit an equivalent impedance circuit. This model was used to incorporate a second life battery to a PV system, which was simulated by using daily irradiance and load data for Tucson (AZ) under most various month (May).

Heterogeneous Multi-Sensor Fusion For 2d And 3d Pose Estimation, Hanieh Deilamsalehy

Dissertations, Master's Theses and Master's Reports

Sensor fusion is a process in which data from different sensors is combined to acquire an output that cannot be obtained from individual sensors. This dissertation first considers a 2D image level real world problem from rail industry and proposes a novel solution using sensor fusion, then proceeds further to the more complicated 3D problem of multi sensor fusion for UAV pose estimation.

One of the most important safety-related tasks in the rail industry is an early detection of defective rolling stock components. Railway wheels and wheel bearings are two components prone to damage due to their interactions with the …

Minimum Time Control Of Paralleled Boost Converters, Shishir Patel

Dissertations, Master's Theses and Master's Reports

Demand for electrification is booming in both, traditional and upcoming generations of technological advancements. One of the constituent blocks of these electrified systems is Power conversion. Power conversion systems are often constructed by paralleling multiple power converter blocks for high performance and reliability of overall system. An advanced control technique is developed with an aim to optimize system states of heterogeneous power converters within minimum time while maintaining feasible stress level on individual power converter blocks. Practical implementation of real-time controller and performance improvement strategies are addressed. Experimental results validating high performance control scheme, and sensitivity analysis of system states …

Investigation Of The Use Of 3-D Printer Platform As Building Block For Rapid Design Of Research And Manufacturing Tool, Handy Chandra

Dissertations, Master's Theses and Master's Reports

This thesis attempts to show how an open source 3-D printer platform, the self replicating rapid prototype (RepRap), could be used to accelerate the development of research and manufacturing tools. Two projects are shown as examples, both utilizing components of the 3-D printer platform.

The first project is to develop an instrument capable of performing automated large-area four-point probe measurements. A modified RepRap 3-D Printer with a four-point probe in place of the 3-D printer head is utilized as a precision positioning platform. The printer together with custom designed measurement circuit and software performs automated measurement on multiple points on …

A Testbed Design For Monitoring The Long-Term Spatial-Temporal Dynamics Of Underwater Acoustic Channels, Krishna Chaitanya Poduru

Dissertations, Master's Theses and Master's Reports

The underwater acoustic network testbed helps to validate the theoretical results and bridge the gap between experimental results. Characterizing and modeling the spatial-temporal dynamics of underwater acoustic channels is essential to developing efficient and effective physical-layer communication algorithms and network protocols. This work dedicates to designing a testbed system to measure the spatial-temporal dynamics of underwater acoustic channels. The collected measurements will shed insights into the spatial-temporal correlation of underwater acoustic channels and will be used to evaluate the theoretical algorithms that are designed to model the spatial-temporal dynamics and to exploit the spatial-temporal dynamics for more efficient and effective …

Hardware Design And Integration And Software Programming For Optical Elastography, Nima Taherkhani

Dissertations, Master's Theses and Master's Reports

The elastic and viscoelastic properties of skin are a reflection of its health. Measurement of these elastic properties can be used as the indicator of various pathologies. The measurement concept in our works is to mechanically stimulate the skin with a low frequency pneumatic force using non-invasive means of deflecting the skin and use laser speckle to study the elasticity of the skin.

The goal of this work was to develop a setup for in vivo optical elastography of skin. This setup includes an electro-mechanical device which is able to deliver a sinusoidal pneumatic stimulus equivalent to 10 grams of …

A Fault Tolerant, Data Fusion System For Navigation Applications To A Ducted Fan Vtol Uav, Jian Lu

Dissertations, Master's Theses and Master's Reports

A Fault Tolerant, Data Fusion (FTDF) algorithm for a Ducted Fan Unmanned Aerial Vehicle (DFUAV) Navigation System is presented. The algorithm have two parts: Gradient Descent (GD) for the Attitude and Heading Reference System (AHRS) and an Interacting Multiple Model (IMM) for position estimation. The GD methodology was designed to fuse the gyroscope, accelerometer, and geomagnetic sensors. The IMM algorithm is able to identify and compensate for multiple sensors data failures. There are three parts in the presentation.

Firstly, system identification and the Allan Variance method is used to build dynamic models and noise models for multiple Sensors and Actuators. …

Modeling, Simulation And Control Of Hybrid Electric Vehicle Drive While Minimizing Energy Input Requirements Using Optimized Gear Ratios, Sanjai Massey

Dissertations, Master's Theses and Master's Reports

This project was conducted to analyze (model and simulate) and optimize an electric motor based drive system to propel a typical passenger vehicle in an urban driving environment. Although there are many HEV and EV type systems on the market today, this paper chose the Toyota Prius HEV system as a baseline using a brushless AC motor.

Although a vehicle can be driven many ways, a more standardized Urban Dynamometer Driving Schedule, UDDS, was chosen to simulate real driving conditions. This schedule is determined by the US Environmental Protection Agency, EPA, and is intended to represent the city driving conditions …

Blind Area Target Aiming System And Preference Selection Training System Design, Zhine Kang

Dissertations, Master's Theses and Master's Reports

A cyber-physical system (CPS) is a system of leveraging computational elements controlling physical entities that is widely applied in our daily life for all kinds of purpose. It helps us build smart devices and make life become much easier. In this report, two projects were designed to show the idea that how cyber-physical system works in human daily life. The first project is designed for personal security, especially for one of the most dangerous job: security service. It helps user defend his back while he/she is in a tough situation while he or she is alone. First there will be …

3d Printing, Open-Source Technology And Their Applications In Research, Chenlong Zhang

Dissertations, Master's Theses and Master's Reports

Open-source software received tremendous success as it drives down the cost of software and expand the distribution. Open-source hardware, as part of the open-source movement, has just risen into public attention for its potential to further drive down the cost of all kinds of manufacturing goods and reshape the manufacture chain. In this report we explores the history, development and the future of open-source hardware project, summarizing the opportunities, challenges and possible solutions. 3D printing is demonstrated as a booster to assist open-source hardware’s development. Low-cost 3D printer enables at-home and in-time fabrication, the download-print-use-improve-distribute cycle is established to encourage …