Electrical and Electronics Commons^™

Analysis And Design Of A 2-Bit Millimeter-Wave Reconfigurable Intelligent Surface And Investigation Of Fss-Assisted Angular Stability, Max Spalek

Master's Theses

Millimeter-Wave (mm-wave) technology utilizes high frequency spectrum and can deliver multi-gigabit speeds, ultra-low latency, and massive bandwidth capacity. However, this technology is rather new and many technical challenges remain. On the other hand, Reconfigurable Intelligent Surfaces (RIS) have emerged as promising structures for controllable electromagnetic wavefront manipulation in wireless communication systems. This thesis presents the design of a 2-bit RIS unit-cell element operating throughout the 30–34 GHz mm-wave band, where the structure was progressively refined from an initial resonating geometry toward a grounded reflective RIS configuration. The proposed structure utilizes PIN-diode switching states to produce four discrete reflected phase states …

Data-Driven Physical-Layer Optimization For Rf And Optical Communications: Transmitarray Metasurfaces, Contextual-Bandit Mud, And Coherent Optical Links, Chengtao M. Xu

Doctoral Dissertations and Master's Theses

This dissertation studies three physical-layer optimization problems that share a common difficulty: the forward model, whether an electromagnetic solver or a statistical channel model, is either too expensive to evaluate at design scale or too unstable to hold across a single processing block. The first two problems are treated in their own right, as problems in antenna design and in multi-user detection over time-variant channels; the third carries the methodology onto a coherent optical link, where size, weight, and power constraints make a small-satellite deployment the natural target.

The antenna work targets a tri-layer pixelated unit cell fabricated on Avient …

Condition Monitoring Of Induction Motor Using Motor Current Signature Analysis, Francis Ikechukwu Obianke, Joseph Okhaifoh, Benjamin Akinloye

Al-Bahir

Induction machines serve as the cornerstone and driving force of modern manufacturing and production systems. This research aims to monitor and analyse the operating performance of induction motors using motor current signature analysis (MCSA). MCSA is employed to process the current signal of a motor into a frequency spectrum, known as the current signature by applying the Fast Fourier Transform (FFT) algorithm. The underlying principle is that vibration generated in a motor is closely related to the changes of the magnetic field density, and the induced voltage varies with the stator current.

A simulation model replicating the behaviour of an …

Nanomagnet Based Reservoir Computing And Quantum Control, Fahim F. Chowdhury

Theses and Dissertations

Conventional CMOS scaling has driven remarkable advances in computing but faces increasing physical and energy constraints, motivating alternative computing paradigms that integrate memory and computation while improving energy efficiency. Nanoscale magnetic systems offer a promising platform for such approaches because their intrinsic nonlinear dynamics and localized magnetic fields can support both classical and quantum information processing. This thesis investigates nanomagnetic systems for physical reservoir computing and, with primary emphasis, for localized quantum control of spin qubits.

The first part explores dipole-coupled nanomagnet arrays as physical reservoirs. Micromagnetic simulations demonstrate nonlinear dynamical behavior with high short-term memory and parity-check capacity, enabling …

Early-Time/High-Frequency Electromagnetic Induction Sensing For Minimal-Metal And None-Metallic Subsurface Targets, Michele Louise Maxson

Dartmouth College Ph.D Dissertations

Conventional electromagnetic induction (EMI) systems operate within the quasi-static regime, where measurements are dominated by conduction currents and are primarily sensitive to highly conductive targets and bulk soil properties. As a result, these systems exhibit limited sensitivity to low-conductivity and layered media, such as permafrost, composite materials, and minimum-metal landmines, where diagnostically relevant information resides in early-time/high-frequency electromagnetic responses, generally above 100 kHz. This limitation reflects a mismatch between conventional EMI system design and the underlying target physics, restricting the ability of standard EMI approaches to resolve fine-scale non-metallic subsurface structure.

In this thesis, I investigate early-time/high-frequency sensitivity as a …

Experimental Validation Of Optical Wireless Communication And Power Transfer For Uav Applications, Fnu Dhruv

UNF Graduate Theses and Dissertations

Unmanned Aerial Vehicles (UAVs) have revolutionized emergency response, disaster assessment, and search-and-rescue operations. However, their operational efficacy is fundamentally constrained by limited battery endurance and the susceptibility of traditional radio-frequency communication to disruption in adverse weather. To address these limitations, this thesis proposes and experimentally validates a novel architecture integrating Free-Space Optical (FSO) communication with Simultaneous Lightweight Information and Power Transfer (SLIPT). This system utilizes a split-beam configuration to concurrently enable high-bandwidth data transmission and optical energy harvesting to replenish the UAV's battery pack. The research was conducted in three progressive phases. Initially, system feasibility was established through rigorous optical …

Series Resonant Converters With Medium Voltage Sic Mosfets For Electric Aircraft Applications, Xinyuan Du

Graduate Theses and Dissertations

To develop high-performance high- power-density MV power converters, the emerging silicon carbide (SiC) devices are more attractive than their silicon (Si) counterparts, since the fast switch frequency brought by the SiC can effectively reduce the volume and weight of the filter components and thus increase the converter power density. From the converter topology perspective, with the MV dc distribution, the single stage isolated dc/dc converter are suitable for next-generation electric aircraft system due to soft switching and high power density. In this work, comprehensive static and dynamic characterizations were conducted for the latest 6.5 kV silicon carbide (SiC) MOSFETs from …

Computational Methods For Complex Electromagnetic Geometries And Media, Edgar Bustamante

Open Access Theses & Dissertations

Additive manufacturing has enabled electromagnetic devices with increasingly complex geometries, but existing numerical tools remain limited in their ability to model and design such structures. This dissertation presents two major advancements that address these restrictions in the finite-difference frequency-domain method (FDFD) and the spatially-variant lattice algorithm (SVLA). These two numerical methods provide a foundation for future exploration in the simulation, optimization, and realization of next-generation electromagnetic devices. First, a general bianisotropic FDFD formulation based on the vector wave equation is presented that enables practical modeling of metamaterials using effective medium homogenized parameters rather than explicitly resolving subwavelength metamaterial features. The …

Design And Performance Analysis Of A Frequency-Reconfigurable Rectangular Patch Antenna With Dual-Slot Defected Ground Structure For Gsm Band, Sara Abdelbaset, Ashraf Khalaf, Amr Hussien, Ahmed A. Kabeel

Journal of Engineering Research

In this paper, an innovative frequency-tunable rectangular patch antenna is presented, featuring interlaced circular and U-shaped narrow slots, combined with a rectangular-shaped defected ground structure (DGS). This design is specifically developed to produce radiation patterns similar to those of traditional dipole antennas. The integration of the rectangular DGS with three RF varactor diodes, along with two equivalent microstrip conductors, enables a tunable operating frequency band that ranges from 1.08 GHz to 1.7 GHz, achieving a total bandwidth of 0.62 GHz. The DC biasing network connected to the three RF varactor diodes is utilized to finely tune and adjust the resonance …

Emerging Applications On Reconfigurable Computing Platforms, Zhenyu Xu

All Dissertations

Security and high-performance computing have become two of the most critical demands in modern technology. The increasing complexity of digital systems, the need for real-time processing, and the emergence of sophisticated cyber threats require computing solutions that balance computational power with adaptability and security. Reconfigurable computing platforms, particularly Field-Programmable Gate Arrays (FPGAs), offer a promising solution to these challenges by combining flexibility with hardware acceleration. Many new applications have emerged with the developing of reconfigurable platforms.

FPGAs can be utilized in two primary directions: as control and high-precision measurement units for security-sensitive applications, and as accelerators capable of outperforming GPUs …

Generative Ai For 3d Printed Antenna Design, Jennifer Ann Chavez

Open Access Theses & Dissertations

This research explores the integration of generative artificial intelligence (AI) with a physics-informed particle swarm optimizer (PSO) to develop 3D printable microstrip patch antennas. A neural network was trained on a dataset of microstrip patch antenna geometries and their corresponding performance metrics: return loss and gain. The PSO used a fitness function prioritizing low return loss in potential antennas, eventually yielding novel antenna geometries with parasitic components. 3D printing constraints were also hard coded into the framework, thus preventing any geometries being generated that cannot be fabricated. When simulated using Ansys HFSS, the AI generated microstrip patch antennas exceeded the …

Power-Beaming: Wireless Energy Transfer Using Lasers, Spencer L. Barnett

ATU Scholars Symposium

The objective of the project is to implement a wireless energy transfer system utilizing laser technology. This system involves modulating the laser’s beam profile and spatial distribution through precise optical manipulation. The energy transmitted by the laser is captured by a photovoltaic array, commonly referred to as a solar panel, which is engineered to convert incident photons into direct current (DC) electrical power. The current challenge is to develop a reliable wireless energy transfer mechanism capable of operating over extended distances, thereby overcoming the constraints imposed by wired connections, particularly in environments where wiring is impractical, such as in space. …

A 0.18 Μm Cmos 40 Ghz Miniaturized Coupled-Line Coupler With Enhanced Directivity, Elsayed Ibrahim Elsaidy, Amr H. Hussein Prof.Dr., Mustafa M. Abd Elnaby Prof. Dr., Anwer S. Abd El-Hameed Dr.

Journal of Engineering Research

No abstract provided.

Characterization And Modeling Of Polyphase Machines And Power Conditioning Components, Nathan Lockhart

Electrical Engineering Dissertations - Archive

Microgrid power configurations have become increasingly prevalent in recent power systems due to the rise of power electronic energy generation, energy storage, and the many diverse electrical demands. Microgrids offer numerous advantages over traditional power electronic networks, which rely on large rotating generators to supply power over extensive distances to multiple users. Remote power grids are particularly beneficial for smaller networks that may be isolated or have unique power requirements, often incorporating energy storage to enhance operational flexibility. Advances in power electronics, such as medium voltage DC distribution, are enhancing the reliability, redundancy, and integration capabilities of isolated microgrids.

To …

Photonic Crystal Devices For Chip Scale Sensing Systems, Yudong Chen

Electrical Engineering Dissertations - Archive

This thesis investigates the design and integration of photonic crystal (PC) structures for compact, high-performance optical platforms, with a focus on applications in gas sensing, on-chip lasers, and flat optics. Chapter 1 introduces the fundamental principles of PC design and simulation, highlighting their potential to replace bulky components in micro-gas chromatography (µGC) systems through miniaturization and integration. Chapter 2 explores PC-based nanobeam lasers, including the Lambda-Scale Embedded Active-Region Photonic Crystal (LEAP) laser, which demonstrates strong optical confinement and energy-efficient operation, with energy consumption as low as 8 fJ/bit. These laser designs are evaluated for their suitability in low-power, high-speed on-chip …

Characterization Of Dc Arc Flash Events Generated By Electrochemical Energy Storage, Nicolaus E. Jennings

Electrical Engineering Dissertations - Archive

The increasing rise in the use of electrochemical energy storage (ECES) like in the form of valve regulated lead acid (VRLA) batteries, lithium-ion (Li-ion) batteries, electric double layer capacitors (EDLC), and metalized film, oil filled capacitors prompt new challenges concerning electric worker safety. The primary safety hazards associated with ECES are electric shock and arc flash. The electric shock hazard is well understood to the extent where it is known what potential and exposure duration will cause levels of pain and ultimately fatality. Various personal protective equipment (PPE) like insulating gloves allow electric workers to perform maintenance with sufficient protection …

Vector Estimation For Continuous Tracking Of Observed Radio Signals (V.E.C.T.O.R.) Lunar Navigation System, Dimitry Melnikov, Evan Bartel, Andrew Burrier, Goran Gjorgievski

Williams Honors College, Honors Research Projects

NASA's Artemis program requires precise navigation capabilities to establish the first sustained presence on the lunar surface. However, as launches bring necessary orbital infrastructure, the Artemis program will face a critical period during which reliable lunar navigation is not possible. To address this challenge, the V.E.C.T.O.R. system tracks assets, such as rovers and astronauts, as User Terminals relative to a pre-existing cell tower, or Base Station. To do so, the system leverages existing Base Station hardware to calculate the location of User Terminals in conjunction with existing communications infrastructure.

Simulated Efficiency Of A Modified Bmw I3 Traction Motor Operating As An Isolated Dc-Dc Converter, Shayne Taylor

Graduate Research Theses & Dissertations

Battery electric vehicles are currently fighting to have any advantage over internal combustion engine powered vehicles to reduce global transportation greenhouse gas emissions. Electric motors are typically deemed as the largest source of loss in many vehicles but have recently become more efficient on average than the AC-DC converter used to charge the vehicle. This paper investigates the potential for a dual three phase electric traction motor based on a BMW i3 electric vehicle traction motor to take the place of an isolated DC-DC converter, an important part of the AC-DC converter. This electric machine in simulations produced a similar …

Chipless 3d Microfluidic Rf Sensing, Sheikh Dobir Hossain

Open Access Theses & Dissertations

Effective management of the cold chain is essential to uphold the quality and safety of products vulnerability to physical factors like temperature, humidity, pressure, etc., including perishable foods, pharmaceuticals, and vaccines. Chipless Radio Frequency Identification (RFID) sensors have become increasingly favored as a viable technology for tracking, inventory, and sensing industries due to their wireless and non-line of sight (NLOS) situations, straightforward fabrication, cost efficiency, and adaptability to challenging environmental conditions. However, there is still a need for advancements in RFID sensors to make them promise for cold chain applications. Integration of flexibility and non-volatile memory into the existing RFID …

Gratings In Optical Waveguides And Lasers, Weida Zhang

Electrical Engineering Theses and Dissertations

Gratings play a crucial role in Distributed Bragg reflector (DBR) lasers, influencing their performance and characteristics. The focus of this work is aimed at the design of DBR lasers that significantly impact the laser's spectral and temporal behavior, making it a key component in optimizing DBR laser functionality.

The SMU developed grating software, compared with commercially available photonics software, has improved accuracy and much smaller computation times. The improved accuracy and reduced computation times compared with commercial photonics software occur because commercial software is typically based on numerical methods such as finite-difference time-domain (FDTD), eigenmode expansion and beam propagation methods …

Electromagnetic Theory And Applications, 2nd Edition, Nicholas Madamopoulos, George Kliros

Open Educational Resources

This book intends to provide both the fundamentals of Electromagnetics but also some practical applications of the concepts covered. Having taught electromagnetics for several years, the authors feel that many times the field of electromagnetics comes as “old” and often times students do not appreciate the concepts and their importance in everyday applications. The authors intend to accompany the EM concepts with life applications. Hence, students may see the direct impact of the knowledge they acquire through the study of the field of electromagnetics and better appreciate the field.

Parallel Communications In Single-Core Optical Fibers Utilizing Spatial Domain Multiplexing And Wavelength Division Multiplexing, Mingxuan Tu

Theses and Dissertations

This endeavor proposes a hybrid parallel optical communication architecture in single-core fibers combining WDM in O-band (1270 nm, 1310 nm, 1310 nm, and 1330 nm) and two-channel SDM. The proposed architecture applies carefully designed delays in each propagating channel to achieve synchronization and, therefore, realizes parallel transmission in single-core fibers without the help of Serializer/De-serializers (SerDes). A mathematical model of SDM, calculations on delays between each optical channel, simulation of the hybrid architecture, experimental setup, and the testing and analysis of channel performance have been provided. A design of a photonic integrated circuit based on thin film lithium niobate electro-optic …

Design Of High Efficiency Doherty Power Amplifier, Kobi G. Kelly, Severin Pindell

Electrical Engineering

The project includes design and fabrication of a high efficiency power amplifier for a student design competition held at International Microwave Symposium (IMS) 2023. Efficient power amplifiers are critical for base station communication requiring efficient use of available power. The final design optimizes power added efficiency (PAE) and linearity. The amplifier will operate at 2.45 GHz. Competitive PAE above 50%, and C/I above 30 dB is achieved by leveraging a Doherty class amplifier using accurate discrete CGH4006P transistor models to simulate an efficient and linear design. Unique design features include optimal transistor bias point selection and power split ratios between …

Design And Characterization Of A Broadband Rf Switch Utilizing Surface Mount Devices, Daniel Bracamontes

Master's Theses

High frequency solid-state switches are critical elements in communication systems, radio frequency (RF) systems and instrumentation. Key parameters to an RF switch include insertion loss while on and off-state isolation. Power handling and linearity are important to consider for a cost-effective construction. This becomes a design challenge into K-band frequencies as components required need to be small, dielectric losses and transmission lines need to be physically matched for proper isolative and through states. This thesis presents a novel single pole eight throw (SP8T) hybrid design composed of commercially available surface mount technology solutions to achieve high isolation and low insertion …

Low Noise Amplifier For 5ghz Wi-Fi Applications On 22nm, Harshdeep Singh

Electrical Engineering Undergraduate Honors Theses

More devices than ever are being used to connect to the internet via Wi-Fi than ever before. This creates the demand for improving Wi-Fi standards and wireless transceivers. On of the most important stages of a Wi-Fi receiver is the low noise amplifier (LNA), this is because it is the very first stage after the antenna receives the signal. The LNA is responsible for boasting the incoming signal while adding a low amount of noise to boast the signal enough to make it receptible to the rest of the receiver system. This study sought to design an inductively degenerated common …

4-Channel Spatially Multiplexed Communication System In Single-Core Optical Fibers, Ce Su

Theses and Dissertations

This dissertation delves into exploring and advancing spatial domain / space division multiplexing (SDM) technologies within single-core optical fibers, a frontier in optical fiber communications poised to meet the burgeoning global demand for data transmission. At the heart of this research is the pursuit to significantly enhance the capacity and efficiency of optical fiber communication systems without necessitating additional fiber infrastructure. This work unveils a new paradigm in optical fiber communications characterized by a pioneering 4-channel SDM system through a meticulous process encompassing theoretical modeling, computational simulations, design innovations, and rigorous experimental validations. Theoretical contributions include the development of refined …

Intelligent Millimeter-Wave System For Human Activity Monitoring For Telemedicine, Abdullah K. Alhazmi, Mubarak A. Alanazi, Awwad H. Alshehry, Saleh M. Alshahry, Jennifer Jaszek, Cameron Djukic, Anna Brown, Kurt Jackson, Vamsy P. Chodavarapu

Electrical and Computer Engineering Faculty Publications

Telemedicine has the potential to improve access and delivery of healthcare to diverse and aging populations. Recent advances in technology allow for remote monitoring of physiological measures such as heart rate, oxygen saturation, blood glucose, and blood pressure. However, the ability to accurately detect falls and monitor physical activity remotely without invading privacy or remembering to wear a costly device remains an ongoing concern. Our proposed system utilizes a millimeter-wave (mmwave) radar sensor (IWR6843ISK-ODS) connected to an NVIDIA Jetson Nano board for continuous monitoring of human activity. We developed a PointNet neural network for real-time human activity monitoring that can …

Exponential Fusion Of Interpolated Frames Network (Efif-Net): Advancing Multi-Frame Image Super-Resolution With Convolutional Neural Networks, Hamed Elwarfalli, Dylan Flaute, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Convolutional neural networks (CNNs) have become instrumental in advancing multi-frame image super-resolution (SR), a technique that merges multiple low-resolution images of the same scene into a high-resolution image. In this paper, a novel deep learning multi-frame SR algorithm is introduced. The proposed CNN model, named Exponential Fusion of Interpolated Frames Network (EFIF-Net), seamlessly integrates fusion and restoration within an end-to-end network. Key features of the new EFIF-Net include a custom exponentially weighted fusion (EWF) layer for image fusion and a modification of the Residual Channel Attention Network for restoration to deblur the fused image. Input frames are registered with subpixel …

Semiconductor Photonic Crystal Surface Emitting Lasers For High Power, High Brightness And High Speed Applications, Chhabindra Gautam

Electrical Engineering Dissertations - Archive

Photonic Crystal Surface Emitting Laser (PCSEL) is the promising third generation semiconductor laser technology as it addresses the challenges of the conventional semiconductor lasers (EEL/VCSEL) by providing single mode high power output with good beam quality (thus high brightness). The large area in plane coupling resulting from the multiple Bragg’s diffraction conditions in the periodic 2D photonic crystal cavities in the lasing cladding region leads to single mode operation over very large area. By model design engineering, such in plane lasing cavity can leak the light out of the plane, which result in surface emission. The ability to scale the …

Reinventing Integrated Photonic Devices And Circuits For High Performance Communication And Computing Applications, Venkata Sai Praneeth Karempudi

Theses and Dissertations--Electrical and Computer Engineering

The long-standing technological pillars for computing systems evolution, namely Moore's law and Von Neumann architecture, are breaking down under the pressure of meeting the capacity and energy efficiency demands of computing and communication architectures that are designed to process modern data-centric applications related to Artificial Intelligence (AI), Big Data, and Internet-of-Things (IoT). In response, both industry and academia have turned to 'more-than-Moore' technologies for realizing hardware architectures for communication and computing. Fortunately, Silicon Photonics (SiPh) has emerged as one highly promising ‘more-than-Moore’ technology. Recent progress has enabled SiPh-based interconnects to outperform traditional electrical interconnects, offering advantages like high bandwidth density, …