Electrical and Electronics Commons^™

Wireless Coverage Using Unmanned Aerial Vehicles, Hazim Shakhatreh

Dissertations

The use of unmanned aerial vehicles (UAVs) is growing rapidly across many civilian application domains including real-time monitoring, search and rescue, and wireless coverage. UAVs can be used to provide wireless coverage during emergency cases where each UAV serves as an aerial wireless base station when the cellular network goes down. They can also be used to supplement the ground base station in order to provide better coverage and higher data rates for the users. During such situations, the UAVs need to return periodically to a charging station for recharging, due to their limited battery capacity. Given the recharging requirements, …

Impairments In Ground Moving Target Indicator (Gmti) Radar, Phuoc Doan Huu Vu

Dissertations

Radars on multiple distributed airborne or ground based moving platforms are of increasing interest, since they can be deployed in close proximity to the event under investigation and thus offer remarkable sensing opportunities. Ground moving target indicator (GMTI) detects and localizes moving targets in the presence of ground clutter and other interference sources. Space-time adaptive processing (STAP) implemented with antenna arrays has been a classical approach to clutter cancellation in airborne radar. One of the challenges with STAP is that the minimum detectable velocity (MDV) of targets is a function of the baseline of the antenna array: the larger the …

Optimizing Resource Allocation In Eh-Enabled Internet Of Things, Ali Shahini

Dissertations

Internet of Things (IoT) aims to bridge everyday physical objects via the Internet. Traditional energy-constrained wireless devices are powered by fixed energy sources like batteries, but they may require frequent battery replacements or recharging. Wireless Energy Harvesting (EH), as a promising solution, can potentially eliminate the need of recharging or replacing the batteries. Unlike other types of green energy sources, wireless EH does not depend on nature and is thus a reliable source of energy for charging devices. Meanwhile, the rapid growth of IoT devices and wireless applications is likely to demand for more operating frequency bands. Although the frequency …

Characterization Of Self-Heating Effects And Assessment Of Its Impact On Reliability In Finfet Technology, Peter Christopher Paliwoda

Dissertations

The systematically growing power (heat) dissipation in CMOS transistors with each successive technology node is reaching levels which could impact its reliable operation. The emergence of technologies such as bulk/SOI FinFETs has dramatically confined the heat in the device channel due to its vertical geometry and it is expected to further exacerbate with gate-all-around transistors.

This work studies heat generation in the channel of semiconductor devices and measures its dissipation by means of wafer level characterization and predictive thermal simulation. The experimental work is based on several existing device thermometry techniques to which additional layout improvements are made in state …

Load Balancing And Scalable Clos-Network Packet Switches, Oladele Theophilus Sule

Dissertations

In this dissertation three load-balancing Clos-network packet switches that attain 100% throughput and forward cells in sequence are introduced. The configuration schemes and the in-sequence forwarding mechanisms devised for these switches are also introduced. Also proposed is the use of matrix analysis as a tool for throughput analysis.

In Chapter 2, a configuration scheme for a load-balancing Clos-network packet switch that has split central modules and buffers in between the split modules is introduced. This switch is called split-central-buffered Load-Balancing Clos-network (LBC) switch and it is cell based. The switch has four stages, namely input, central-input, central-output, and output stages. …

Rancang Bangun Alarm Deteksi Asap Rokok Dan Kebisingan Pada Ruang Kelas Secara Otomatis Berbasis Mikrokontroler, Imas Dian Ratnasari

Elinvo (Electronics, Informatics, and Vocational Education)

Abstrak- Asap rokok dan kebisingan merupakan masalah yang sering terjadi di sekolah, sedangkan dalam penanganan masalah asap rokok dan kebisingan di sekolah belum maksimal karena belum terdapat alat yang mampu mendeteksi asap rokok sekaligus kebisingan yang diterapkan di sekolah. Pemantauan kondisi ruang kelas agar tetap kondusif perlu diadakan, maka dari itu dilakukan pengembangan alarm deteksi asap rokok dan kebisingan pada ruang kelas secara otomatis. Penelitian ini bertujuan untuk membantu guru dalam memonitoring kondisi di ruang kelas ketika ruang kelas sedang tidak ada guru. Metode penelitian yang digunakan adalah Research and Development (R&D), yang terdiri dari beberapa tahapan mulai yaitu dari …

Pengatur Suhu Dan Kelembaban Kumbung Jamur Otomatis, Aji Nugroho

Elinvo (Electronics, Informatics, and Vocational Education)

Temperature and humidity have an important role in the cultivation of oyster mushrooms to obtain optimal growth of oyster mushrooms. The optimum temperature required ranges from 24 ° C - 27 ° C and 80% - 90% humidity. The watering of mushroom kumbung should be done regularly, in order to maintain the temperature and humidity of the surrounding air, then conducted research that aims to create a tool that can regulate the temperature and humidity kumbung mushrooms automatically to facilitate farmers keep the temperature and humidity stability continuously. This automatic adjustment system uses DHT-11 sensors as air and humidity and …

Otomasi Sistem Hidroponik Dft (Deep Flow Technique) Berbasis Arduino Android Dengan Memanfaatkan Panel Surya Sebagai Energi Alternatif, Eko Agus Suprayitno Mt, Rohman Dijaya M. Kom, M. Atho㢂¬„¢Illah St

Elinvo (Electronics, Informatics, and Vocational Education)

The application of hydroponic farming methods has been widely applied by the community, the system used is still manual so that it lacks quality, both in terms of humidity and growth. For that we need a system that is able to regulate the time of watering and the provision of nutritional solutions automatically without disturbing the activity. In the design of an automatic DFT hydroponic system using an Android Arduino based solar panel. Where the solar panel system functions as a renewable energy substitute for PLN which will fill the accumulator. The accumulator filling process is equipped with a solar …

Desain Dan Implementasi Real-Time Visible Light Communication System Berbasis Bpsk, Trio Adiono, Syifaul Fuada

Elinvo (Electronics, Informatics, and Vocational Education)

Salah satu teknik multiplexing yang saat ini populer digunakan untuk aplikasi akses komunikasi cepat berbasis cahaya tampak adalah Orthogonal Frequency Division Multiplexing (OFDM). Meskipun lebih kompleks dibandingkan modulasi berbasis Pulse Time Modulation (PTM), teknik OFDM disinyalir dapat lebih menghemat bandwidth komunikasi karena membagi bandwidth lebar menjadi spektrum yang sempit (sub-carrier) dan saling overlap. Sebagai akibat, transfer data akan lebih cepat dibandingkan PTM. Pada penelitian sebelumnya, penulis telah berhasil mendesain sistem low-cost VLC dengan modulasi digital 1-PWM (3,3 kbps) dan 2-PWM (6,2 kbps). Motivasi dari penelitian ini adalah menigkatkan laju data dengan menggunakan OFDM. Modulasi binary shift-keying modulation …

Reosquido Desalinasi Metode Evaporasi Dengan Ultraviolet Berbasis Mikrokontroller, Muhammad Abdul Azis, Nuryake Fajaryati

Elinvo (Electronics, Informatics, and Vocational Education)

This research aims to create a Reosquido desalination tool for evaporation methods using a microcontroller. This tool can control the temperature to speed up the evaporation process in producing fresh water. The method applied to Reosquido desalination uses Evaporation. The first process before evaporation is the detection of temperature in sea water that will be heated using an element heater. The second process of temperature measurement is to turn off and turn on the Arduino Uno controlled heater, when the temperature is less than 80 ° then the heater is on. The third process is evaporation during temperatures between 80 …

Icing Thickness Prediction Model For Overhead Transmission Lines, Yue Ming

Theses

Failures in a large electric power system are often inevitable. Severe weather conditions are one of the main causes of transmission line failures. Using the fault data of transmission lines of Shaanxi Power Grid from 2006 to 2016, in conjunction with meteorological information, this paper analyses the relationship between the temporal-spatial distribution characteristics of meteorological disasters and the fault of transmission lines in Shaanxi Province, China.

In order to analyze the influence of micro-meteorology on ice coating, a grey correlation analysis method is proposed. This thesis calculates the grey relational between ice thickness and micro-meteorological parameters such as ambient temperature, …

Amorphous Metal Oxide Semiconductor Thin Film Transistors For Printed Electronics, Mustafa Mohammad Yousef

Theses

There is an acute market need for solution-processable semiconductor inks that can form the essential components of the printed analog and digital circuits. Currently, the industry is migrating beyond simply printing conductive metals for interconnects and embracing higher integration by printing transistors directly on the same substrate. This thesis focuses on investigating solution-processed amorphous indium gallium zinc oxide (IGZO) as a semiconducting channel layer of a field-effect transistor to enable low-cost, large-area printed electronics that are physically flexible and optically transparent. Specifically, we aim to achieve field-effect mobility exceeding 1 cm²/Vs, to overcome the limits faced in existing …

Noise And Gain Characterization Of Interband Cascade Infrared Photodetectors, Eli A. Garduño

Electrical and Computer Engineering ETDs

Infrared (IR) detectors are an enabling technology for a broad and growing list of applications including gas detection, night vision, and space-based missile warning. There are ongoing efforts in IR detector research to explore the potential of new material systems and energy band structures in addition to continuously improving their sensitivity through increasing their quantum efficiency and lowering their dark current and noise. This dissertation examines an emerging class of IR detectors known as Interband Cascade Infrared Photodetectors (ICIPs).

ICIPs contain multiple regions to facilitate the collection of photogenerated electrons and to limit unwanted dark current. Theory regarding their performance …

Basis Vector Model Method For Proton Stopping Power Estimation Using Dual-Energy Computed Tomography, Shuangyue Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Accurate estimation of the proton stopping power ratio (SPR) is important for treatment planning and dose prediction for proton beam therapy. The state-of-the-art clinical practice for estimating patient-specific SPR distributions is the stoichiometric calibration method using single-energy computed tomography (SECT) images, which in principle may introduce large intrinsic uncertainties into estimation results. One major factor that limits the performance of SECT-based methods is the Hounsfield unit (HU) degeneracy in the presence of tissue composition variations. Dual-energy computed tomography (DECT) has shown the potential of reducing uncertainties in proton SPR prediction via scanning the patient with two different source energy spectra. …

Nanopower Analog Frontends For Cyber-Physical Systems, Kenji Aono

McKelvey School of Engineering Graduate Student Theses & Dissertations

In a world that is increasingly dominated by advances made in digital systems, this work will explore the exploiting of naturally occurring physical phenomena to pave the way towards a self-powered sensor for Cyber-Physical Systems (CPS). In general, a sensor frontend can be broken up into a handful of basic stages: transduction, filtering, energy conversion, measurement, and interfacing. One analog artifact that was investigated for filtering was the physical phenomenon of hysteresis induced in current-mode biquads driven near or at their saturation limit. Known as jump resonance, this analog construct facilitates a higher quality factor to be brought about without …

Smart Iot Sprinkler System, Galib F. Rahman

Publications and Research

The average family spends more than $1000 in water costs per year. One-way water is commonly wasted in many households is via inefficient sprinkler systems for lawns. Current technology has enabled the development of automatic sprinkler systems, which can be preconfigured to operate at desired times of day and intervals. Although these systems may reduce the amount of water utilized overall, they are not weather forecast aware. In situations when rainfall is upcoming the systems still water the lawn. In this project, we plan to implement a smart sprinkler system that has full awareness of upcoming weather and take account …

Conversion Of Heat Energy From Cooling Water Of Diesel Engine To Electrical Energy Using Thermoelectric Generator, Muhammad Hasan Albana

Makara Journal of Technology

This research objective is to convert heat from the radiator fluid of a diesel engine to electrical energy by utilizing a thermoelectric generator (TEG). The TEG consists of 20 semiconductors (TE modules) and is equipped with a heat sink. The research shows that using the TEG, the heat of radiator fluid can be converted to electrical energy, although the electricity generated is small. The maximum electrical voltage generated by the TEG when modules were connected in series was 10 volts. When the TE modules were connected in parallel and series-parallel, the maximum voltages generated were 2.11 and 2.53 volts, respectively. …

Immittance Response On Carboxymethyl Cellulose Blend With Polyvinyl Alcohol- Doped Ammonium Bromide-Based Biopolymer Electrolyte, Norfatihah Mazuki, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

The blended carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) doped with various compositions of ammonium bromide (NH4Br)-based solid biopolymer electrolytes (SBEs) were prepared by using the casting method. In this present work, CMC/PVA–NH4Br SBE thin film was used to investigate the electrical conductivity via electrical impedance spectroscopy. The maximum conductivity obtained was 3.21 X 10−4 S cm−1 for sample AB20 at ambient temperature (303 K), and this result might be due to the increased number of charge carrier. A dielectric study was conducted to understand the conductivity behavior. The electrical properties have been measured as a function of frequency of …

Transition Metal Dichalcogenide For High-Performance Electrode Of Supercapacitor, Saifful Kamaluddin Muzakir, Ahmad Salihin Samsudin, Bouchta Sahraoui

Makara Journal of Technology

Molybdenum dichalcogenides have been reviewed from the perspectives of bandgap, conductivity, and oxidation states of transition metal. Researchers have concluded that a narrow-bandgap transition metal dichalcogenide with high conductivity could be achieved for the high-performance electrode of a supercapacitor.

Automated Compilation Test System For Embedded System, Mohamad Khairi Ishak, Ooi Jun Hwan, Teh Jiashen, Nor Ashidi Mat Isa

Makara Journal of Technology

Embedded system testing involves testing an integration of software and hardware. It is increasingly difficult to evaluate the functionality of each module within a short time because of the increasing number of tests required. In this paper, a novel stepwise methodology involving the use of an automated compilation test system (ACTS) is proposed, to improve the quality of testing and optimize the testing time using automation. Using the proposed method, the testing coverage can be maximized, while minimizing the manual work and testing time required. This ACTS was used to automate the test code compilation and execution for different hardware …

Activated Carbon Fixed-Bed Adsorber Design For Treating Chromium Hexavalent Wastewater, Tedi Hudaya, Velicia Rachmat

Makara Journal of Technology

Pollution caused by industrial wastewater containing heavy metals is a major issue, primarily due to its toxic nature. A cheap yet effective method to deal with such wastewater is activated carbon adsorption. The purpose of this research is to evaluate and design a fixed bed adsorber with granular activated carbon as an adsorbent to process wastewater-containing chromium hexavalent (Cr 6+). Experiments show that the Langmuir isotherm fits the equilibrium data as effectively as the Freundlich isotherm. Activated carbon used in this research is Jacobi 2000® derived from bituminous coal. The lab scale inlet volumetric flow is 100 mL/h with different …

A 2.3/3.3-Ghz Dual Band Low Noise Amplifier Using Switchable Load Inductor In 0.18-Um Cmos Technology, Taufiq Alif Kurniawan, Hsiao-Chin Chen

Makara Journal of Technology

In this paper, the dual band low noise amplifier is designed in 0.18-μm CMOS technology. By combining the proposed switchable load inductor for gain controlling and the conventional inductive source degeneration topology, narrow band gain and good impedance matching are achieved at 2.3/3.3-GHz frequency bands. The new mathematical analysis of low noise amplifier design is derived to define the component parameters of the proposed circuits. The proposed low noise amplifier exhibits gain of 17.18 dB and 15.5 dB, and noise figure of 2.67 dB and 2.52 dB at the two frequency bands, respectively.

Ascorbic Acid Degradation In Cut Lemon Packaged Using Oxygen Scavenging Active Film During Storage, Kurniawan Yuniarto, Setyo Purwanto, Bruce Ari Welt, Anang Lastriyanto

Makara Journal of Technology

Oxygen scavenging active film can be used to prevent diffusion of free oxygen due to the action of permeation mechanism. In this study, biodegradable oxygen scavenging plastic film was designed by incorporating an antioxidant agent into plasticized polylactic acid or PLA-PEG (PPLA). Butylated hydroxytoluene (BHT) was added at different concentrations into the matrix of the PPLA film using a direct casting method to produce oxygen scavenging active film. The antiradical activity of the oxygen scavenging active film was observed, which could be applied for preventing vitamin C degradation in cut lemon during storage. The antiradical activity of the active film …

The Importance Of Usability Aspect In M-Commerce Application For Satisfaction And Continuance Intention, Yassierli Yassierli, Vinsensius Vinsensius, M. S. Syed Mohamed

Makara Journal of Technology

There has been a rapid growing of m-commerce application in recent years due to the development of mobile communication technology and e-commerce business. However, only about 30% of online users, who conduct online searching, make online purchases. The low conversion rate seems to be correlated with poor usability aspect of most m-commerce applications and poor satisfaction reported by users. Research has reported that satisfaction and continuance intention in using m-commerce applications have relationships with service quality and information quality. In this study, a new model of user satisfaction and continuance intention in the context of mobile application was proposed by …

Development Of A Rapid Fatigue Life Testing Method For Reliability Assessment Of Flip-Chip Solder Interconnects, Cody Jackson Marbut

Graduate Theses and Dissertations

The underlying physics of failure are critical in assessing the long term reliability of power packages in their intended field applications, yet traditional reliability determination methods are largely inadequate when considering thermomechanical failures. With current reliability determination methods, long test durations, high costs, and a conglomerate of concurrent reliability degrading threat factors make effective understanding of device reliability difficult and expensive. In this work, an alternative reliability testing apparatus and associated protocol was developed to address these concerns; targeting rapid testing times with minimal cost while preserving fatigue life prediction accuracy. Two test stands were fabricated to evaluate device reliability …

Distance-Based Cluster Head Election For Mobile Sensing, Ruairí De Fréin, Liam O'Farrell

Conference papers

Energy-efficient, fair, stochastic leader-selection algorithms are designed for mobile sensing scenarios which adapt the sensing strategy depending on the mobile sensing topology. Methods for electing a cluster head are crucially important when optimizing the trade-off between the number of peer-to- peer interactions between mobiles and client-server interactions with a cloud-hosted application server. The battery-life of mobile devices is a crucial constraint facing application developers who are looking to use the convergence of mobile computing and cloud computing to perform environmental sensing. We exploit the mobile network topology, specifically the location of mobiles with respect to the gateway device, to stochastically …

Dc-Dc 4-Switch Buck-Boost Converter For Energy Harvesting From Elliptical Machines, Alexander C. Samietz, Gustavo Guzman

Electrical Engineering

The senior project report documents the process of replacing the network of resistors inside an elliptical machine with a DC-DC buck-boost converter. The buck-boost DC-DC converter accepts a wide input range of 5-60 Volts, with an output of 36 Volts for the most efficient use of the already available microinverter. The microinverter reclaims the lost energy and safely distributes it back to the electrical grid. The addition of this project reduces heat emissions from wasted energy and shrinks the carbon footprint of its users.

Nanosatellite Launch Data-Logger (Sync), Christopher Martin Gerdom

Master's Theses

CubeSat designers are increasingly looking to incorporate delicate structures and optics into their payloads. These delicate payloads, however, may not survive the required absolute-worst-case launch vibration testing needed for flight certification. To help address this problem, and to better match testing conditions to real-world launch environments, this thesis introduces Sync, a compact 1/4U CubeSat payload designed to collect data on the vibrations and thermal environments CubeSats experience inside a deployer on the way to orbit. This data can be used to better understand the launch environment for different vehicles, and help develop new, more realistic testing guidelines that could enable …

3d Signal Strength Mapping Of 2.4ghz Wifi Networks, Brett D. Glidden

Electrical Engineering

Many commercial businesses operate out of multi-story office buildings. These companies often use many Wi-Fi access points to set up their own wireless network. IT personnel determine proper Wi-Fi access point placement using Wi-Fi strength maps. Conventional Wi-Fi strength maps only provide a two-dimensional view representing the wireless access point's effective range. The signal quality and strength measurements do not include changing vertical elevation. Efficient network layout in a multi-story building requires a system calculating signal quality metrics in three dimensions.

This project involves designing and prototyping a system to achieve 2.4GHz Wi-Fi signal quality measurements in a three-dimensional reference …

A Novel Ultrasound Imaging Technique Using Random Signals, Anahita Khalilzadeh

Electrical Engineering Theses and Dissertations

Ultrasound imaging has been used extensively because of its benign nature and relatively low cost implementation. The most common approach for forming an image is Brightness Mode (B-Mode), which uses an array with dynamic focusing. Focus is performed through Phase Shifters that are bulky and complicated components which increases the device cost.

This research describes a new method to form an Ultrasound image, without relying on phase shifting. The proposed method offers a lower cost solution compared to the B-Mode systems and overcomes some of their inherent limitations.