Nanoscience and Nanotechnology Commons^™

Silicon Quantum Electronics, Floris A. Zwanenburg, Andrew S. Dzurak, Andrea Morello, Michelle Y. Simmons, Lloyd C. L. Hollenberg, Gerhard Klimeck, Sven Rogge, Susan N. Coppersmith, Mark A. Eriksson

Birck and NCN Publications

This review describes recent groundbreaking results in Si, Si/SiGe, and dopant-based quantum dots, and it highlights the remarkable advances in Si-based quantum physics that have occurred in the past few years. This progress has been possible thanks to materials development of Si quantum devices, and the physical understanding of quantum effects in silicon. Recent critical steps include the isolation of single electrons, the observation of spin blockade, and single-shot readout of individual electron spins in both dopants and gated quantum dots in Si. Each of these results has come with physics that was not anticipated from previous work in other …

Quest For Organic Plasmonics, Lei Gu, J. Livenere, G. Zhu, Evgenii E. Narimanov, M. A. Noginov

Birck and NCN Publications

Many photonic metamaterials and plasmonic devices, in spite of their unparalleled responses to light waves and nearly fantastic applications, suffer from absorption loss in constituent metallic components. Unfortunately, none of the known techniques aimed to conquer the absorption loss has led to a revolutionary technological breakthrough, prompting a continuing quest for efficient solutions to the loss problem. In this letter, we study optical properties of non-metallic organic plasmonic and epsilon-near-zero materials and demonstrate propagation of a surface plasmon polariton at the interface between solid organic dye and air. (C) 2013 AIP Publishing LLC.

High Precision Dynamic Alignment And Gap Control For Optical Near-Field Nanolithography, Xiaolei Wen, Luis M. Traverso, Pornsak Srisungsitthisunti, Xianfan Xu, Euclid E. Moon

Birck and NCN Publications

The authors demonstrate the use of interferometric-spatial-phase-imaging (ISPI) to control a gap distance of the order of nanometers for parallel optical near-field nanolithography. In optical near-field nanolithography, the distance between the optical mask and the substrate needs to be controlled within tens of nanometers or less. The ISPI technique creates interference fringes from checkerboard gratings fabricated on the optical mask, which are used to determine the gap distance between the mask and the substrate surfaces. The sensitive of this gapping technique can reach 0.15 nm. With the use of ISPI and a dynamic feedback control system, the authors can precisely …

Optimization Of Electroless Silver Plating Process On Fabric Surface Without Activation And Sensitization, Bo Lian Wang, Ya Ping Zhao, Zai Sheng Cai

Journal of Electrochemistry

Silver was deposited homogeneously on the surface of polyamide fabric by electroless plating without activation and sensitization. The electroless silver plating process was optimized with the orthogonal array testing strategy. It is found that the optimum conditions are the electroless plating time of 50 min with the concentrations of silver nitrate, sodium hydroxide and ammonium hydroxide being 14 g·L^-1, 6 g·L-1 and 130 mL·L^-1, respectively. The surface morphologies, compositions, and phases of fabric samples were characterized by scanning electron microscopy and energy-dispersive X-ray spectrometry (SEM-EDS), X-ray diffraction (XRD). The wear-resisting property was tested by friction fastness …

Electrochemical Nanofabrication Using Polyacrylamide Hydrogel As Soft Stamps, Wen Sun, Hai-Tao Fan, Da-Xiao Zhang, Dong-Jie Hu, Yong-Liang Zhou

Journal of Electrochemistry

The fabrication resolution of electrochemical wet stamping (E-WETS) was enhanced to several hundred nanometers from several ten micrometers by using polycarylamide gel (PAG) as soft stamps and through optimized processes. The PAG stamp was cured on a nanopatterned soft mold and soaked with 0.2 mol·L^-1 KCl solution, then contacted with a silicon wafer with gold film and applied with electric field. And the gold nanopatterns were achieved by the selective anodic dissolving, the diameter of fabricated gold spot was around 200 nm. The parameters which affected the fabrication processes have been discussed in detail.

Investigation Of Ripple-Limited Low-Field Mobility In Large-Scale Graphene Nanoribbons, M. Luisier, T. B. Boykin, Z. Ye, A. Martini, Gerhard Klimeck, N. Kharche, X. Jiang, S. Nayak

Birck and NCN Publications

Combining molecular dynamics and quantum transport simulations, we study the degradation of mobility in graphene nanoribbons caused by substrate-induced ripples. First, the atom coordinates of large-scale structures are relaxed such that surface properties are consistent with those of graphene on a substrate. Then, the electron current and low-field mobility of the resulting non-flat nanoribbons are calculated within the Non-equilibrium Green's Function formalism in the coherent transport limit. An accurate tight-binding basis coupling the sigma- and pi-bands of graphene is used for this purpose. It is found that the presence of ripples decreases the mobility of graphene nanoribbons on SiO2 below …

Growth And Electrical Characterization Of Al0.24ga0.76as/Alxga1-Xas/Al0.24ga0.76as Modulation-Doped Quantum Wells With Extremely Low X, Geoff C. Gardner, John D. Watson, Sumit Mondal, Nianpei Deng, Gabor A. Csathy, Michael J. Manfra

Birck and NCN Publications

We report on the growth and electrical characterization of modulation-doped Al0.24Ga0.76As/AlxGa1-xAs/Al0.24Ga0.76As quantum wells with mole fractions as low as x = 0.00057. Such structures will permit detailed studies of the impact of alloy disorder in the fractional quantum Hall regime. At zero magnetic field, we extract an alloy scattering rate of 24 ns(-1) per% Al. Additionally, we find that for x as low as 0.00057 in the quantum well, alloy scattering becomes the dominant mobility-limiting scattering mechanism in ultra-high purity two-dimensional electron gases typically used to study the fragile nu = 5/2 and nu = 12/5 fractional quantum Hall states. …

Quantum Coherence And Entanglement In The Avian Compass, James A. Pauls, Yiteng Zhang, Gennady P. Berman, Sabre Kais

Birck and NCN Publications

The radical-pair mechanism is one of two distinct mechanisms used to explain the navigation of birds in geomagnetic fields, however little research has been done to explore the role of quantum entanglement in this mechanism. In this paper we study the lifetime of radical-pair entanglement corresponding to the magnitude and direction of magnetic fields to show that the entanglement lasts long enough in birds to be used for navigation. We also find that the birds appear to not be able to orient themselves directly based on radical-pair entanglement due to a lack of orientation sensitivity of the entanglement in the …

Existence Of Negative Differential Thermal Conductance In One-Dimensional Diffusive Thermal Transport, Jiuning Hu, Yong P. Chen

Birck and NCN Publications

We show that in a finite one-dimensional (1D) system with diffusive thermal transport described by the Fourier's law, negative differential thermal conductance (NDTC) cannot occur when the temperature at one end is fixed and there are no abrupt junctions. We demonstrate that NDTC in this case requires the presence of junction(s) with temperature-dependent thermal contact resistance (TCR). We derive a necessary and sufficient condition for the existence of NDTC in terms of the properties of the TCR for systems with a single junction. We show that under certain circumstances we even could have infinite (negative or positive) differential thermal conductance …

Fluorescence Characterization Of Quantum Dots For Use As Biomarkers, Logan M. Grimes

Materials Engineering

Fluorescence profiles of quantum dots (QDs) were characterized to select the ideal QDs for encapsulation in phospholipids for use as biomarkers to selectively adhere to cancer cells. QDs were synthesized and extracted 0, 30, 60, and 90 seconds after precursor compounds were mixed. These extractions were isolated by extraction time. Portions from each vial were coated in a zinc sulfide shelling procedure, leaving at least half of the QD solution unshelled. These samples were characterized over four days to monitor fluctuations in fluorescence. This was done utilizing an Ocean Optics spectrometer in conjunction with Spectra Suite software. The central wavelength, …

Spin-Valley Lifetimes In A Silicon Quantum Dot With Tunable Valley Splitting, C. H. Yang, A. Rossi, R. Ruskov, N. S. Lai, F. A. Mohiyaddin, S. Lee, C. Tahan, Gerhard Klimeck, A. Morello, A. S. Dzurak

Birck and NCN Publications

Although silicon is a promising material for quantum computation, the degeneracy of the conduction band minima (valleys) must be lifted with a splitting sufficient to ensure the formation of well-defined and long-lived spin qubits. Here we demonstrate that valley separation can be accurately tuned via electrostatic gate control in a metal-oxide-semiconductor quantum dot, providing splittings spanning 0.3-0.8 meV. The splitting varies linearly with applied electric field, with a ratio in agreement with atomistic tight-binding predictions. We demonstrate single-shot spin read-out and measure the spin relaxation for different valley configurations and dot occupancies, finding one-electron lifetimes exceeding 2 s. Spin relaxation …

Application Of Quantum Dots Onto Glass Wafers As A Feasibility Test For The Spectral Down Conversion Of Uv Light For Solar Cells, Anthony Fong

Materials Engineering

Quantum dots have the ability to convert high energy photons into multiple lower energy photons. Down conversion of such high energy photons from sources such as UV light can be beneficial for applications on solar cells which waste much of the energy in the form of thermalization. To test this theory, a solar cell was hooked up to an Amprobe Solar Analyzer and tests were run to compare power output with and without the presence of quantum dots. Additionally, quantum dots were spin coated onto a glass wafer to determine its adhesion ability. Spectrometer readings were taken of the wafer …

Atmospheric Pressure He-Air Plasma Jet: Breakdown Process And Propagation Phenomenon, Asma Begum, Mounir Laroussi, Mohammad Rasel Pervez

Electrical & Computer Engineering Faculty Publications

In this paper He-discharge (plasma jet/bullet) in atmospheric pressure air and its progression phenomenon has been studied experimentally using ICCD camera, optical emission spectroscopy (OES) and calibrated dielectric probe measurements. The repetitive nanosecond pulse has applied to a plasma pencil to generate discharge in the helium gas channel. The discharge propagation speed was measured from the ICCD images. The axial electric field distribution in the plasma jet is inferred from the optical emission spectroscopic data and from the probe measurement. The correlation between the jet velocities, jet length with the pulse duration is established. It shows that the plasma jet …

Thickness-Shear And Thickness-Twist Vibrations Of Circular At-Cut Quartz Resonators, Huijing He, Jiashi Yang, Qing Jiang

Department of Mechanical and Materials Engineering: Faculty Publications

Exact solutions for free vibration frequencies and modes are obtained for thickness-shear and thickness-twist vibrations of unelectroded circular AT-cut quartz plates governed by the two-dimensional scalar differential equation derived by Tiersten and Smythe. Comparisons are made with experimental results and the widely-used perturbation solution by Tiersten and Smythe under the assumption of weak in-plane anisotropy. Our solution is found to be much closer to the experimental results than the perturbation solution . For the frequency of the fundamental thickness- shear mode, the error of the perturbation method is 0.4549%, significant in resonator applications.

Cross-Plane Thermoelectric Transport In P-Type La0.67sr0.33mno3/Lamno3 Oxide Metal/Semiconductor Superlattices, Pankaj Jha, Timothy D. Sands, Philip Jackson, Cory Bomberger, Tela Favaloro, Stephen Hodson, Joshua Zide, Xianfan Xu, Ali Shakouri

Birck and NCN Publications

The cross-plane thermoelectric transport properties of La0.67Sr0.33MnO3 (LSMO)/LaMnO3 (LMO) oxide metal/semiconductor superlattices were investigated. The LSMO and LMO thin-film depositions were performed using pulsed laser deposition to achieve low resistivity constituent materials for LSMO/LMO superlattice heterostructures on (100)-strontium titanate substrates. X-ray diffraction and high-resolution reciprocal space mapping indicate that the superlattices are epitaxial and pseudomorphic. Cross-plane devices were fabricated by etching cylindrical pillar structures in superlattices using inductively, this coupled-plasma reactive-ion etching. The crossplane electrical conductivity data for LSMO/LMO superlattices reveal a lowering of the effective barrier height to 223 meV as well as an increase in cross-plane conductivity by …

Direct Pulsed Laser Crystallization Of Nanocrystals For Absorbent Layers In Photovoltaics: Multiphysics Simulation And Experiment, Martin Y. Zhang, Qiong Nian, Yung Shin, Gary J. Cheng

Birck and NCN Publications

Direct pulsed laser crystallization (DPLC) of nanoparticles of photoactive material-Copper Indium Selenide (nanoCIS) is investigated by multiphysics simulation and experiments. Laser interaction with nanoparticles is fundamentally different from their bulk counterparts. A multiphysics electromagnetic-heat transfer model is built to simulate DPLC of nanoparticles. It is found smaller photoactive nanomaterials (e.g., nanoCIS) require less laser fluence to accomplish the DPLC due to their stronger interactions with incident laser and lower melting point. The simulated optimal laser fluence is validated by experiments observation of ideal microstructure. Selectivity of DPLC process is also confirmed by multiphysics simulation and experiments. The combination effects of …

Photonically Excited Electron Emission From Modified Graphitic Nanopetal Arrays, Patrick T. Mccarthy, Scott J. Vander Laan, David B. Janes, Timothy S. Fisher

Birck and NCN Publications

Efficient electron emission for energy conversion requires a low work function and a stable emitter material. The work function of graphene-based carbon materials can decrease significantly by intercalation with alkali metals, thus increasing their emission current. In this work, electron emission from potassium-intercalated carbon nanosheet extensions grown on electrode graphite is investigated. These petal-like structures, composed of 5-25 layers of graphene, are synthesized using microwave plasma chemical vapor deposition. Samples are intercalated with potassium, and a hemispherical energy analyzer is used to measure the emission intensity caused by both thermal and photonic excitation. The emission from the potassium-intercalated structures is …

Nanomaterials For Biological Applications: Drug Delivery And Bio-Sensing, Hui Ma

LSU New Orleans Theses and Dissertations

The idea of utilizing nanomaterials in bio-related applications has been extensively practiced during the recent decades. Magnetic nanoparticles (MPs), especially superparamagnetic iron oxide nanoparticles have been demonstrated as promising candidates for biomedicine. A protective coating process with biocompatible materials is commonly performed on MPs to further enhance their colloidal and chemical stability in the physiological environment. Mesoporous hollow silica is another class of important nanomaterials that are extensively studied in drug delivery area for their ability to carry significant amount of guest molecules and release in a controlled manner.

In this study, different synthetic approaches that are able to produce …

Structural Modification Of Graphene Sheets To Create A Dense Network Of Defect Sites, Mei-Xian Wang, Qi Liu, Zhe-Fei Li, Hong-Fang Sun, Eric A. Stach, Jian Xie

Birck and NCN Publications

Pt/graphene composites were synthesized by loading platinum nanoparticles onto graphene and etched at 1000 degrees C in a hydrogen atmosphere. This results in the formation of a dense array of nanostructured defect sites in the graphene, including trenches, nanoribbons, islands, and holes. These defect sites result in an increase in the number of unsaturated carbon atoms and, consequently, enhance the interaction of the CO2 molecules with the etched graphene. This leads to a high capacity for storing CO2; 1 g of the etched samples can store up to 76.3 cm(3) of CO2 at 273 K under ambient pressure.

Nanowire Metal-Insulator-Metal Plasmonic Devices, Joseph W. Haus, Li Li, Cong Deng, Nkorni Katte, Michael Scalora, Domenico De Ceglia, Maria Antonietta Vincenti

Electro-Optics and Photonics Faculty Publications

In this paper we theoretically study the responsivity of Metal-Insulator-Metal nanostructures to light illumination over a broad wavelength band (1 - 25 microns) and we examine the role of a local field enhancement and electrostatic field on the responsivity.