Geological Engineering Commons^™

A Field Validation Of Dam Indexing Methods In Mississippi, Steven Thomas Fox

Electronic Theses and Dissertations

Indexing methods are applied to dam inventories throughout the United States to assist in prioritizing resources to maintain aging dam structures. Three published indexing methods and one proposed method were applied to 24 dams through Mississippi. The majority of dams in Mississippi have little to no information concerning the performance records or design specifics of a given dam. Field assessments were conducted to determine the physical condition of each dam, identify potentially deficiencies at dams, and calculate a consequence in the event of a dam failure. The results of the four indexing methods will be compared and advantages and disadvantages …

Characterization Of The Engineering Properties And Economic Potential Of The Transitional Clay Unit Of The Ripley Formation, Northeast Mississippi, Richard Christopher Wheeler

Electronic Theses and Dissertations

Expansive soils, throughout Mississippi and the U.S., have long been a source of problems within the engineering and construction industries, leading to billions of dollars in damage annually. Along with being a source of problems, the clays throughout Mississippi are also of economic importance, being mined for a variety of uses. In this study, the engineering properties of the transitional clay facies of the Ripley Formation are studied, to characterize the swell potential of the transitional clay, and to assist with the evaluation of the possible commercial uses of the soil. The transitional clay is an Upper Cretaceous unit characterized …

Visual Inspection And Ground Penetrating Radar Investigation Of The Historical Pulaski County Poor Farm Cemetery, Ibrahim E. Ahmed

Masters Theses

"This thesis is a comprehensive summary of the geotechnical investigation of the Historical Pulaski County Poor Farm Cemetery, southeast Waynesville, Missouri. This research demonstrates that unmarked graves in an abandoned historical cemetery can be located using visual site inspection and ground penetrating radar techniques.

During the course of these investigations, multiple visual site inspections of Pulaski County Poor Farm Cemetery were conducted and ground penetrating radar data were acquired. Based on the visual site inspections and the interpretation of ground penetrating radar data, a total of one-hundred and fifty-one (151) graves were identified; eighty-seven (87) of the graves were mapped …

Waterjet Injection Of Powdered Activated Carbon For Sediment Remediation, Chris J. Redell

Masters Theses

"In situ sediment remediation through waterjet-activated carbon amendment delivery is an innovative means to mitigate the dangers posed by hydrophobic organic compounds. Ease of use and applicability to inundated environments makes this technique valuable. This work made feasible low-pressure injections of a 15% (by dry weight) carbon/water slurry through a pulsating piston pump waterjet. The project fabricated nozzle tips and a unique injection apparatus comprising a quantitative system for the evaluation of bench scale models. Based on a series of iterative processes, injections of carbon were analyzed for depth and concentration. Injections varied in duration and they were made into …

Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While the Techniques and Technologies Associated with Contaminated Sediment Remediation Are Relatively Mature, There Are Several Issues Associated with These Practices that Make Them Unattractive. the Inability of Currently Used Mechanical Mixing Implements to Place Amendments in Aqueous Environments and their Intrusive Behavior toward Benthic Communities Are Just Two Examples of a Necessity for an Improved Delivery Method. Waterjets May Be a Viable Option for Placement of Particulate Remediation Amendments, Such as Activated Carbon and Granular Iron, at Depth. a Custom Waterjet Nozzle and Injection System Has Been Fabricated by the Authors to Examine This Delivery Concept. the Developed Injection …

Using Conditional Probability To Predict Solar-Powered Pump-And-Treat Performance, Erica RenéE Collins

Masters Theses

"Green and sustainable remediation can be further environmentally friendly by using renewable energy systems in place of utility-provided power. This project includes the installation of a single-axis tracking photovoltaic (PV) array at a former dry cleaning site that is undergoing remediation under the Missouri Department of Natural Resources (MODNR) Dry cleaning Environmental Response Trust (DERT) Fund program. The PV array provided power to a positive displacement piston pump that extracted ground water from a 15 m deep monitoring well. The tetrachloroethene (PCE)-contaminated ground water was treated using granular activated carbon (GAC) units prior to discharge to the local publicly owned …

Source Attribution And Interannual Variability Of Arctic Pollution In Spring Constrained By Aircraft (Arctas, Arcpac) And Satellite (Airs) Observations Of Carbon Monoxide, J. A. Fisher, D. J. Jacob, M. T. Purdy, M. Kopacz, P. Le Sager, Shiliang Wu, Et. Al.

Michigan Tech Publications, Part 1

We use aircraft observations of carbon monoxide (CO) from the NASA ARCTAS and NOAA ARCPAC campaigns in April 2008 together with multiyear (2003–2008) CO satellite data from the AIRS instrument and a global chemical transport model (GEOS-Chem) to better understand the sources, transport, and interannual variability of pollution in the Arctic in spring. Model simulation of the aircraft data gives best estimates of CO emissions in April 2008 of 26 Tg month−1 for Asian anthropogenic, 9.4 for European anthropogenic, 4.1 for North American anthropogenic, 15 for Russian biomass burning (anomalously large that year), and 23 for Southeast Asian biomass burning. …

Testing Of Interactions Between Coal Ash Leachates And Rock Materials For Mine Backfill Evaluations, Colin R. Ward, David French, Leanne Stephenson, Ken Riley, Zhongsheng Li

Coal Combustion and Gasification Products Journal Archive

A series of laboratory-based leaching tests has been developed to evaluate the chemical interaction between ash, water and different mine-site rock materials, as a basis for assessing the potential environmental impact of using coal ash as backfill in coal mines. Two different test protocols were used: a two-stage serial batch testing program in which leachate from representative ash samples were allowed to interact separately with relevant rock materials under laboratory conditions, and a single-stage mixed batch testing program in which 50:50 mixtures of the same ashes and rock samples were extracted with water following a similar procedure to leaching tests …

Chemistry Of Coal And Coal Combustion Products From Kentucky Power Plants: Results From The 2007 Sampling, With Emphasis On Selenium, James C. Hower, Thomas L. Robl, Gerald A. Thomas, Shelley D. Hopps, Margaret Grider

Coal Combustion and Gasification Products Journal Archive

Kentucky produced over 8 Mt of coal combustion products (CCPs) in 2006, with 30% of the CCPs being utilized, a significant increase from our 1996 and 2001 surveys. As much of the increase is related to increased utilization of flue-gas desulfurization (FGD) gypsum, the increased production of FGD gypsum coincident with the commissioning of new FGD units and the saturation of the (currently) weak market for new construction, the percentage of utilization may decrease by the time of the next planned survey (2011). The concentration of volatile trace elements in the feed coal and in the pulverizer reject, while associated …

An Investigation Of The Behavior Of Raw Calcareous Fly Ash In Mortar Mixtures, Ioanna Papayianni, Eleftherios K. Anastasiou

Coal Combustion and Gasification Products Journal Archive

The behavior of unprocessed calcareous fly ash in cement mortar mixtures is often questionable and unpredictable and that is one of the difficulties in confining these fly ashes within the limits of standards. This work aims at correlating the material characteristics with its behavior in mortar mixtures. An effort is made to understand how three of the reactive constituents; lime (CaO), silica (SiO2), and sulfates (SO3), affect strength and volume stability. Two raw calcareous fly ashes of different composition emanating from the Ptolemaida area, Greece, were systematically tested to define their profile as cementitious agents that could be incorporated in …

Coal Fired Power Station Ash Products And Eu Regulation, Lindon K.A. Sear

Coal Combustion and Gasification Products Journal Archive

The UK has a long history of the use of coal fired power station ash products in a range of applications in construction. These range from use in concrete as a cementitious material through to its use as a fill material in embankments. While there have been no environmental problems associated with these uses, environmental regulations emanating from the European Union (EU) are increasingly impacting on the use of these materials. Unfortunately it is not a single set of regulations that are being applied, but three separate and apparently disconnected initiatives; these are Registration, Evaluation and Authorisation of Chemicals (REACH), …

Enriched Coal Ash Utilization For Augmenting Production Of Rice Under Acid Lateritic Soil, S. Karmakar, B.N. Mittra, B.C. Ghosh

Coal Combustion and Gasification Products Journal Archive

The use of industrial wastes such as fly ash (FA) or rice husk ash (RHA), along with paper factory sludge (PFS), farmyard manure (FYM), and chemical fertilizers (CF), under integrated nutrient management, was studied in acid lateritic soil on rice. Application of combined fertilization sources increased growth, yield attributes, and yield (up to 92.3 and 9.7% over control and CF, respectively) of wet season rice. The uptake of N, P, K, Ca, Mg, Fe, Mn, Zn, Cu, and Co was increased under combined fertilization sources. The study also indicated that such integrated plant nutrition system improved physico-chemical properties of soil …

Erosive Wear In Pipelines At Pneumatic Conveying Of Fine Silicon-Containing Materials, Viacheslav Y. Putilov, Vijay K. Agarwal, Irina V. Putilova

Coal Combustion and Gasification Products Journal Archive

Erosive wear is a major operational problem in conveying of hard abrasive bulk materials like silica sand, fly ash, coal dust, etc., in pneumatic conveying systems. Erosion results in emergency downtime of pneumatic conveying installations of ash and slag removal and dust-preparation systems at TPPs caused by holes in pipelines. That leads to worsening of technical, economic, and ecological parameters of thermal power plants as a whole. In MPEI, a model of estimating erosion of rectilinear and curvilinear sections of pneumatic conveying pipelines has been developed. To validate the estimating model developed in the MPEI, experimental investigations in the Indian …

Evaluation Of The Variables That Influence Mercury Capture In Solid Sorbents, M. Antonia Lopez-Anton, Patricia Abad-Valle, Mercedes Diaz-Somoano, M. Rosa Martinez-Tarazona

Coal Combustion and Gasification Products Journal Archive

Newly obtained results on mercury retention in fly ashes and activated carbons during coal combustion are compared with previous findings. The influence of different variables on mercury capture, including the composition and nature of the sorbents, the composition of the flue gas and the mercury species in gas phase is investigated. Coal-fired utility boilers are currently the largest single-known source of mercury emissions. According to the USEPA’s Information Collection Request (ICR), on average, only 40% of the mercury entering a coal-fired power plant is captured, while 60% is emitted into the atmosphere. Several solid materials, including activated carbons, are considered …

Mechanical Performance Of Pavement Geomaterials Stabilized With Fly Ash In Field Applications, Lin Li, Tuncer B. Edil, Craig H. Benson

Coal Combustion and Gasification Products Journal Archive

This paper describes an evaluation of the mechanical performance of fly ash stabilized materials. Soft clay soil, asphaltic recycled pavement material (RPM), and road-surface gravel (RSG) were stabilized using Class C and off-specification fly ashes to create working platforms or stabilized base courses for construction of flexible and rigid pavements at six sites in Wisconsin and Minnesota. California bearing ratio (CBR), resilient modulus (Mr) tests, and unconfined compression (qu) tests were conducted on the subgrade soil, RPM, and RSG alone and on mixtures prepared in the field and the laboratory to evaluate improvements in bearing resistance and stiffness. Fly ash …

Manufactured Coal Ash Aggregates For Aqueous Tnt Sorption, Sangchul Hwang, Victor Hernandez

Coal Combustion and Gasification Products Journal Archive

No abstract provided.

Mineralogy And Leaching Characteristics Of Coal Ash From A Major Brazilian Power Plant, Luis F.O. Silva, Colin R. Ward, James C. Hower, Maria Izquierdo, Frans Waanders, Marcos L.S. Oliveira, Zhongsheng Li, Rachel S. Hatch, Xavier Querol

Coal Combustion and Gasification Products Journal Archive

The feed coals, fly ashes and bottom ashes collected from seven different units in a major Brazilian PF power plant have been subjected to comprehensive mineralogical, geochemical, and petrographic studies, to investigate the links between feed coal and ash characteristics. Ashes from two of the units were collected while the coal was being co-fired with oil as part of the boiler start-up procedure, allowing the impact of oil co-firing on ash characteristics also to be evaluated. High proportions of unburnt carbon and high proportions of retained sulphur were found in the fly ashes produced during oil co-firing, probably reflecting less …

Precipitation Of Germanium From Coal Fly Ash Leachates, Fatima Arroyo, Constantino Fernandez-Pereira, Pilar Coca

Coal Combustion and Gasification Products Journal Archive

The valorization of a coal gasification fly ash was studied by leaching the fly ash using different aqueous solutions followed by the subsequent precipitation of the germanium solubilized from the ash. Experimental investigations were focused on the precipitation of a germanium2catechol (CAT) complex with cetyl trimethyl ammonium bromide (CTAB). The influences of pH and amounts of CTAB and CAT on the precipitation yield were investigated. To this aim, a central composite rotatable design and ANOVA Design Expert 7.0.3 Wiley software were employed for experimental design and analysis of the results. Thus, the independent and combined effects of pH, CAT/Ge and …

The Effect Of Drag-Reducing Additives On The Rheological Properties Of Fly Ash-Water Suspensions At Varying Temperature Environment, H.K. Naik, M.K. Mishra, Rao Karanam U.M.

Coal Combustion and Gasification Products Journal Archive

Fly ash transportation and disposal is a major problem in India. Presently fly ash is being transported as lean slurry in pipe lines requiring about 80 to 85% of water which, in turn, consumes more energy input. The objective of the present study is to evaluate the rheological characteristics of fly ash slurry at varying temperatures with and without an additive to facilitate smooth flow in the pipelines. Six fly ash slurry samples were prepared from the fly ash obtained from a thermal power plant situated in the southern part of India. The main constituents of the slurry were fly …

Waste Stabilization/Solidification (S/S) Of Eaf Dust Using Fly Ash-Based Geopolymers. Influence Of Carbonation On The Stabilized Solids, Y. Luna Galiano, C. Fernandez Pereira, J. Vale

Coal Combustion and Gasification Products Journal Archive

The effect of the curing in a carbonated ambient of the solids obtained after the stabilization/solidification (S/S) of metallurgical waste using geopolymerization technology is described in this paper. The electric arc furnace (EAF) dust to stabilize contains hazardous metals such as Pb, Cd, Cr, or Zn. Different geopolymeric agents such as potassium hydroxide, potassium silicate, metakaolin, and blast furnace slag have been used. Mixtures of EAF waste with these geopolymeric materials and class F fly ash as main silica and alumina source have been processed. Samples were submitted to an accelerated carbonation test. Compressive strength tests and different leaching tests …