Metallurgy Commons^™

Electroless And Chemical Metal Deposition On Human Tooth Enamel., Richard Doyle Christie

Masters Theses

"Initial investigations have confirmed the feasibility of depositing an adherent metal film onto tooth enamel. Such films might be used as pit and fissure sealants in preventive dentistry, with denture or orthodontic work, as an intermediate substrate with various organic or inorganic restorative materials, or other such areas. The process employs chemical solutions containing ions of the metal to be deposited and suitable reducing agent solutions.

To date, metallic copper and silver films have been plated onto teeth in vitro. The deposits are quite adherent and appear to exhibit the conductivity, crystal structure, luster, hardness, and other chemical and physical …

Variables Affecting The Rate Of Solution Of Mold Inoculants In Cast Iron, Jose Osorno Fonnegra

Masters Theses

"The purpose of this investigation was to measure the effectiveness of an inoculant alloy reacting with molten cast iron in a reaction chamber properly located in the gating system.

The chemical composition of the gray iron was held constant while several metallurgical factors were varied to produce test samples with different cementite thicknesses. These chill depths were measured as an indication of the inoculation effectiveness.

Appreciable differences in chilling tendency were observed within the different variables studied. The results indicate that pouring temperature, as well as the other variables studied, are of considerable importance when dealing with inoculation of gray …

Mechanism Of Uai3 To Uai4 Transformation, Ling Ping Lee, Hollis P. Leighly

Materials Science and Engineering Faculty Research & Creative Works

The compound, UA14, which forms during the peritectic reaction (Liquid + UA13 → UAI4), has a long needlelike shape and reveals the characteristic morphology of a fishtail when cut along the long axis. When cut perpendicular to the long axis, it shows an internal core of another phase, which has been identified as a primary aluminum solid solution. Because of the interesting relationship between the crystallographic structures of UA13 and UA14, the peculiar UA14 morphology can be explained on the basis of a proposed mechanism. The mechanism of UA13 to UA14 transformation has been identified as shear and diffusion controlled …

Corrosion And Electrochemical Behavior Of Indium And Indium-Bismuth Alloys In Hydrochloric Acid, Yar Ming Wang

Doctoral Dissertations

"The corrosion of In-Bi alloys was studied using X-ray, scanning electron microscopy, atomic absorption spectroscopy, and cyclic voltammetry techniques.

Calculated activation energy values indicated that the corrosion of In-Bi alloys was activation controlled. The effect of amine mixtures on the corrosion of In and In₂Bi (ß₁ phase) was studied. Morphological studies revealed that the porosity of the resulting physical surface structure was influential in determining the corrosion rate. In deaerated 3N HCl solutions, the selective dissolution of indium was the predominant mechanism in the corrosion of In-Bi alloys. The corrosion was always accompanied by a phase change …

Application Of Voltammetry To Copper Electrodeposition, Louis Francis Toth Jr.

Doctoral Dissertations

"A study was undertaken to determine the feasibility of using voltammetry and scanning electron microscopy techniques to characterize copper deposition from an acid-sulfate electrolyte. The main process variables investigated were temperature and addition agents (chloride ion, glue, separan or thiourea) at different concentrations, over a range of current densities. Cathodes employed were either polycrystalline titanium or copper. Some long-time copper deposits were also made using Ti cathodes and the orientations of these deposits were determined by x-ray diffraction.

Observations of copper crystals produced during voltammetry scans, on a Ti cathode, indicated that a characteristic morphology was associated with each type …

The Spheriodization Of Tool Steels., Siri Ram Rai

Masters Theses

"Four different tool steels--AISI 01, Sl, A9 and Tl5--were obtained in the 1/2-inch diameter hot rolled and air-cooled condition from the steel mill. The lower critical temperatures of these steels were determined. The spheroidization of each steel by three different spheroidizing procedures was evaluated with the use of hardness testing and metallographic techniques. Isothermal annealing completely spheroidized each steel yielding coarse carbides and low hardness. Cyclic annealing was an effective spheroidization procedure only for 01 and Tl5 steels. Hardening and tempering resulted in rather fine spheroidized structures in these steels. The total time consumed to produce the best spheroidized structures …

Phase Equilibria Near The Solidus Temperature For Iron-Rich Fe-Cu-C Alloys., Kenneth L. Metz Jr.

Masters Theses

"The effect of copper on the solidification temperature of graphite-saturated iron-rich alloys was determined with the use of cooling curves. The ternary invariant temperature for the alloy was found to be 1172°c with the use of heating curves. At 1172°c, graphite, austenite, an iron rich liquid, and a copper-rich liquid are in equilibrium. The composition of the metallic phases was determined by weight gain, chemical analysis, and the electron microprobe. In addition, the composition of the iron-rich liquid was calculated from thermodynamic data. Isothermal sections of the iron-rich corner of the system were constructed for several temperatures in the range …

A Microscopy Study Of Lead Sinter, Thomas J. O'Keefe, C. Bennett, E. R. Cole

Materials Science and Engineering Faculty Research & Creative Works

Samples of up-draft sinters produced at three different Missouri lead smelters were studied, to determine the chemical phases present, as a first step toward a more complete understanding of the lead blast furnace operation. The sinters seemed to be basically similar, and all the results reported are from samples from one smelter (Herculaneum smelter, St. Joe Minerals). Analytical tools used included the electron microprobe and scanning electron microscope with a non-dispersive X-ray spectrometer attachment Major phase that were positively identified are metallic lead, lead sulfide and zinc ferrite. The predominant lead phase was tentatively identified as a lead oxide-silicate compound. …

The Morphology Of Cellular Precipitation In Magnesium Rich Magnesium-Aluminum Alloys, Jyong Shi Cho

Doctoral Dissertations

"The morphology of cellular precipitation in a Mg-9wt. %AI alloy has been investigated by light and electron microscopy. A study of the early stages of the cellular precipitation process indicated that cellular precipitate structure forms in Mg-Al alloys by Fournelle and Clark mechanism. "Replacive" motion indicative of the Tu and Turnbull mechanism for cellular precipitation was not seen"--Abstract, page 1.

A Study Of The Feasibility In Obtaining The Kinetics Of Various Ordering Phenomena Of The Iron Aluminum System Utilizing The Mössbauer Effect, Lloyd Rollan Chapman

Masters Theses

"The determination of the kinetics of ordering for various ordering phenomena of the Iron-Aluminum system utilizing exclusively the Mössbauer effect technique is shown to be infeasible for all but a highly restrictive consideration from experimental as well as theoretical evidence. Also, the possible use of the Mössbauer effect for the analysis of other ordered systems is discussed.

An alternative method for the acquisition of the needed information utilizing diffraction and Mossbauer techniques is presented recognizing the need for a computer fitting analysis of the complex Mössbauer effect spectra. However, at this stage of investigation, no experimental work has been performed …

Detection Of Impurities In Zinc Sulfate Electrolytes By Cyclic Voltammetry Techniques., Bruce Alan Lamping

Masters Theses

"A cyclic voltammetric technique has been developed for quantitatively detecting the presence of active chemical species present in zinc sulfate electrolytes. The experimental apparatus consisted of a pyrex "H" cell, an Al cathode encased in a Teflon holder, a carbon anode and a mercurous sulfate reference electrode. Voltammograms were obtained from industrial, purified neutral leach solution (Cominco Ltd., Trail, B.C.) acidified to give a final concentration of 0.77 M Zn⁺⁺, 1 M H₂SO₄. The polarization curves were then evaluated and used as a reference standard to compare with results obtained when various organic and …

Kiss Gating In Sand-Cast Aluminum Alloys., Michael Lynn Holt

Masters Theses

"This thesis describes the optimum conditions necessary for the production of macrosound plate castings of sand-cast aluminum alloys by the kiss gating process. Castings of alloys of different freezing ranges in the Al-Si-Cu system (alloys 195, 319, 380, and 384) were produced and examined visually to evaluate the effectiveness of various gating systems and superheats on the production of macrosound castings.

For the aluminum alloys used in this investigation, the optimum conditions leading to the production of macrosound castings without the use of risers are one or a combination of the following: (l) wider freezing ranges; (2) pressurized gating systems; …

Effect Of Nodule Count And Cooling Rate On The Matrix Of Nodular Iron., Subrata Sen Gupta

Masters Theses

"The objective of this investigation was to establish the relationship between the nodule count, the matrix structure, and the cooling rate through the eutectoid in nodular iron. The chemical composition of the nodular iron was held constant while various inoculation methods, inoculants, and mold designs, including chills, were used to vary the solidification time and cooling rate through the eutectoid range. This produced variations in both the matrix structure and the nodule count.

The nodule count has a power relationship with the percent pearlite in the matrix at fixed cooling rates: Percent pearlite = K (Nodule count)^-n where the …

Magnetostrictive Aftereffects In A Dilute 50fe-50ni-C Alloy, Raj N. Master

Masters Theses

"Crystallographically equivalent interstitial sites are energetically equivalent when the host crystal is free of any fields. This situation is shown in Fig. Pl from which it may be appreciated that the difference of the free energy of the "crystal" with an interstitial "I" located in "x" and "y" sites, respectively, is equal to zero. This energy equivalence of the various interstitial sites is destroyed when the host crystal is subjected to fields such as strain fields, magnetization fields or a combination of both as may be appreciated from Figs. P2 through P4. In this case, the interstitials will preferentially occupy …

Film Formation On Anodically Polarized Lead, H. Vaidyanathan, Ram A. Narasagoudar, Thomas J. O'Keefe, William Joseph James, James W. Johnson

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Electronic Contribution To The Entropy Of Solution, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Magnetostrictive Aftereffect In A Dilute 50fe-50ni-C Alloy, Raj Master, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Esca Characterization Of Flotation Products From A Lead-Zinc-Copper Concentrator On The New Lead Belt Of Southeast Missouri., Kevin Leroy Purdy

Masters Theses

"Electron spectroscopy for chemical analysis (ESCA) was used to determine the surface characteristics of products from an operating Pb-Zn-Cu concentrator on the New Lead Belt of southeast Missouri and pure galena and sphalerite samples treated with flotation reagents in concentrations similar to those used in the mills. The emphasis was on the action of surface modifiers such as Na₂Cr₂O7, starch, SO₂, CuSO₄ and NaCN in sphalerite flotation and in the galena-chalcopyrite separation. The objective of the investigation was to monitor the relative oxidation states of the mineral and reagent constituents and correlate these …

Amine Flotation Of Feldspar From Magnetite Concentrate., Gary William Hudiburgh Jr.

Masters Theses

"The gangue in some magnetite ore bodies contains feldspar; the alkali content of the feldspar reduces the usefulness of these iron ores. One method of decreasing the feldspar content in magnetite concentrate is froth flotation.

The amine flotation of feldspar from magnetite concentrate was investigated using zeta potential measurements, Hallimond tube flotation tests and laboratory-scale flotation tests. The zeta potential of various feldspars (microcline, albite, anorthite, oligoclase and anorthoclase) were determined as a function of pH; the point of zero charge ranged from pH 1.4 to 2.5. Hallimond tube flotation tests using two amine reagents were conducted on the feldspars. …

Explosive Metal Forming, Braulio Antonio Tovar

Graduate Research Papers

This study will be concerned with investigating the development of equipment and instructional materials to teach a unit of explosive metal forming in a high school Industrial Arts class. The study will be specifically concerned with: (1) dies and dies blanks for explosive forming, (2) physical phenomena such as velocity, pressure forces, etc., generated in the explosion, (3) technical and laboratory activity content regarding explosion forming, and (4) to prepare a final written report.

Precipitation Of Carbon From Martensite In Ductile Iron, Devendra Ratilal Majmundar

Masters Theses

"Since metallographic studies of quenched and tempered cast iron have indicated that the carbon might precipitate directly as graphite rather than as carbides which are found in steels, this investigation used the Debye-Scherrer x-ray diffraction technique to examine electrolytically extracted residues from quenched and tempered ductile cast iron samples to determine if cementite was present. The precipitation of carbon in quenched samples of this ductile cast iron was found to be similar to the precipitation process in steels. Cementite was identified during the early stages of the tempering process when the tempering temperature was 800 degrees F, 900 degrees F, …

Prebainitic Phenomena In Aisi 86b80 And 0.8c-5.3ni Steels, Chung Lim

Doctoral Dissertations

"An ultrasonic investigation shows that the prebainitic kinetics of AISI 86B80 and 0.8C-5.3Ni steels follow t^2/3 and or t¹ time laws in the lower bainite temperature region. The data analysis indicates that these kinetics signal carbon segregation to dislocations. The simple time laws are interrupted at the bainite start time. It is shown that at this time the carbon depleted regions around dislocations transform martensitically. The lower bainite reaction is thus initiated by the formation of supersaturated ferrite through carbon segregation and the subsequent local martensitic transformation"--Abstract, page iii.

Premartensitic Elasticity Of Fe-Ni Invars, Bryce Linn Shriver

Doctoral Dissertations

"The premartensitic temperature dependence of ultrasonic wave propagation in Fe-30 pct Ni polycrystals and Fe-32 pct Ni single crystals was measured by using a continuous wave technique. As the temperature was lowered to within 10°C of the M_s, a nonlinear decrease of the relative shear velocity was observed. This effect is related to dislocation stacking fault instabilities which may trigger the martensitic phase transformation. In addition, the single crystals show a frequency dependence of the shear elastic constant C' well above the M_s. The dispersion is believed to be caused by fluctuations in the anisotropic molecular …

The Effect Of Gating On Soundness Of Al-Alloy Permanent Mold Castings, Dinesh Shantilal Patel

Masters Theses

"This thesis describes the step by step approach to the design of a gating system for the production of sound plate castings in permanent molds. Castings of different thicknesses were produced, utilizing various gating systems, and examined radiographically to evaluate the effectiveness of these gating systems in the production of sound castings. A gating system which allows metal to enter the mold cavity with no turbulence and which establishes proper temperature gradients in the casting will produce sound permanent mold castings"--Abstract, page ii.

A New And Direct Process For The Reduction Of Lead Sulfide, Rolando Oscar Fernandez

Masters Theses

"The direct reduction of lead sulfide concentrates by iron was investigated. An oxygen-bearing flux was shown to be a necessary ingredient for complete reduction of the concentrate. The effects of time and temperature on lead recovery were studied. Only a trace amount of sulfur dioxide is evolved during reduction, which is in agreement with thermochemical calculations"--Abstract, page ii.

Powder Metallurgy, Harold L. Street

Graduate Research Papers

The purpose of the study is (1) to investigate pertinent literature and industries for the purpose of learning how the powder metallurgy process is carried out; (2) to construct a set of dies to press metal powder; (3) to use this equipment to press and sinter specimens; (4) to develop a unit of study on powder metallurgy suitable for use in an introductory metal class.

Photo Chemical Milling, Terry R. Smith

Graduate Research Papers

This study is concerned with the techniques used in the production of metal parts by the use of photofabrication. Included will be a research of the historical background of the industry, and the production processes used by the photofabrication industry that apply to this project. Information will include careers, education, current status of the industry, as well as methods for implementing the processes into the industrial arts curriculum.

Thermal Expansion Of Nickel And Iron, And The Influence Of Nitrogen On The Lattice Parameter Of Iron At The Curie Temperature, Jinn-Wen Hwang

Masters Theses

"By precise X-ray measurements, the lattice parameter of pure nickel (Fisher Co., reagent grade) was found to be 3.52389 Å at 25ºC. At the same temperature, the lattice parameters of iron samples were found to be: 2.86621 Å, 2.86624 Å and 2.86614 Å for purities of 99.999%, 99.985% and 99.9%, respectively. By measuring high angle back reflection lines, the linear coefficients of thermal expansion of both nickel and iron were precisely determined. Both, high purity nickel and iron, exhibited anomalies in their expansion coefficients near their Curie points. This is in agreement with some of the previously reported data. Some …

The Morphology Of The Cellular Precipitation Reaction In A Pb-3.0 Wt% Sn Alloy, Federico Sequeda Osorio

Masters Theses

"The complete development of the cellular precipitation structure at selected grain boundaries in a Pb-3.0 wt% Sn alloy during aging at 34°C and 23°C was investigated by light microscopy. The cellular structure in this alloy consists of lamellae of solute depleted lead solid solution and lamellae of ß tin precipitate. The cellular precipitation reaction begins by local migration of a grain boundary with concomitant grain boundary precipitation of ß tin. The grain boundary bows around the ß tin grain boundary precipitates which then begin to lengthen in the direction of boundary migration thus forming the precipitate lamellae of the cell. …

Dissolution Potentials And Activation Energies Of Insb Single Crystals, Martin E. Straumanis, Lih Da Hu

Materials Science and Engineering Faculty Research & Creative Works

The rest (or corrosion) and dissolution potentials of InSb single crystals in HC1 were determined. There is no potential difference (within error limits) between the inverse {111} faces in pure HC1. A difference of up to 44 mV and more develops as soon as the InSb electrode is anodically dissolved. The potential becomes less noble in the sequence In{111}, {100}, {110}, Sb{111}. The Tafel relationship is observed over three decades of current density. With additions of FeCl3, FeCl2, K3Fe(CN)6, K4Fe(CN)6, H2C4H4O6 to 2N HC1, the anodic potentials of both inverse {111} faces are shifted to more active values; the e'H …