Metallurgy Commons^™

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Study Thermodynamics Of The Magnetite Sulfidation In Copper Smelting Processes, A S. Khasanov, Q T. Ochildiyev, B T. Berdiyarov, Sh T. Khojiev, S T. Matkarimov

Technical science and innovation

The article discusses the problem of reducing the amount of magnetite in the impregnation of copper in the slag generated after the conversion process in copper production in the furnace to reduce slag. Accordingly, a method of lowering magnetite by sulfidation has been proposed, using elemental sulfur as a local and relatively inexpensive sulfiding-reducing agent. The mechanism of chemical phenomena occurring in the interaction regions of magnetite and elemental sulfur has been developed. Based on the mechanism of chemical reactions produced, each chemical reaction that occurs in the process is analysed from a thermodynamic point of view. According to the …

Functionally Magnetic Gradient Copper-Nickel Material Fabricated Via Directed Energy Deposition, Vy Tran Phuong Nguyen

Graduate Theses, Dissertations, and Problem Reports

Functionally gradient materials (FGMs) of CuSn10 and Inconel 718 were fabricated via a hybrid directed energy deposition (DED) system. The objective of the present thesis is to determine the feasibility of manufacturing CuSn10 and Inconel 718 FGMs via DED and investigate the physical and mechanical properties and the microstructures of the resulting FGMs. The physical tests comprised of conductivity and Seebeck coefficient measurements. The microstructure analysis and mechanical testing include microscopic imaging, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and hardness test. In addition, compressive strength test was performed to analyze the interface bonding behaviors.

The Effect Of Mass Transport On Deposit Quality In Copper Electrowinning, Joseph Bauer

Doctoral Dissertations

"Roughness and nodulation of copper electrodeposits depend strongly on mass transfer conditions of copper ions to the electrode surface. Mass transfer properties in electrowinning electrolytes were first characterized. The effective diffusivity of cupric ion was measured with a rotating disk electrode in CuSO₄-H₂SO₄ electrolytes at temperatures relevant to electrowinning, with and without additives. Adding 20 mg L^-1 of chloride ion increased the measured diffusion coefficient, but commercial smoothing additives had little effect. An empirical formula to predict cupric diffusivity was generated for later use in mass transport modeling.

Boundary layer thickness information for commercial …

Voltammetric Investigation Of Xanthate Chemisorption On A Chalcopyrite Surface, Jesse Lynn Bowden

Graduate Theses & Non-Theses

Cyclic Voltammetry experiments have been conducted on copper, iron, and chalcopyrite (CuFeS2) and compared to mass-balanced EH-pH Diagrams. Potassium ethyl xanthate (KEX) was added to solution and additional voltammetry experiments were performed to determine the surface chemistry reactions of flotation collector in solution with these minerals. The ultimate goal of this research was to investigate the possibility of xanthate chemisorption onto the chalcopyrite mineral surface. Results of the copper mineral testing confirm previous literature studies and corroborate published isotherm data. Results of the iron mineral testing showed changes in surface reactions with the addition of potassium ethyl xanthate to solution, …

Understanding Impurities In Copper Electrometallurgy, Paul Laforest

Masters Theses

"This work involves examining two industrial reports of methods to handle impurities in copper electrowinning and electrorefining. The first part evaluates the addition of Hydrostar, Cyquest N-900, DXG-F7, and Guartec EW to copper electrowinning electrolyte to affect MnO₂ deposition on coated titanium anodes (CTAs). The second part examines the effects of anode chemistry and thiourea addition on the ductility of electrorefined copper starter sheet.

In part one, a laboratory cell was used to simulate a short cycle electrowinning cell via chronopotentiometric operation with an IrO₂-Ta₂O₅ CTA at 40⁰C. A cyclic voltammetric sweep was applied …

Coating Material Interaction On Metal Substrate By Application Of Plasma Spraying, Ajit Behera

Ajit Behera

In this paper, Fly-ash+quartz+illmenite with weight percentage ratio: 60:20:20, is deposited on mild steel and copper substrates by atmospheric plasma spraying at various operating power level ranging from 11 to 21 kW. The properties of the coating depend on the interaction of coating powder with plasma, operating condition and the process parameters. The coating quality and behavior depends on Coating surface & interface morphology are studied with Scanning Electron Microscope. For Mild Steel the adhesion strength has varied from 3.5MPa to 6.56MPa and for Mild steel a maximum of 6.56MPa at the power level of 21 kW. In plasma spraying, …

Processing And Characterization Of Plasma Spray Coating By Using Industrial Waste And Low-Grade Ore, Ajit Behera

Ajit Behera

No abstract provided.

Effect Of Moisture Absorption On The Sinter Quality Of Central Solenoid (Cs) Coil Pack, Zeshaan Sher Mohammed

Masters Theses

Fusion energy has been said to be the solution to all the world’s energy problems. The International Thermonuclear Experimental Reactor (ITER) is the flagship project to demonstrate the feasibility of fusion energy. The Central Solenoid (CS), an important component of the reactor, is needed to induce plasma current, initiate, ramp-up, ramp-down, and sustain plasma in a very controlled manner. In order to achieve this, the CS coil packs must be manufactured under controlled conditions. The CS conductor is an advanced cable-in-conduit Nb3Sn superconductor. The CS cable will be made in long continuous sections but with thousands of meter of cable …

Copper Converter: Basic Research Testing With A Plastic Model Converter And Four Types Of Refractories, Arthur C. Bigley Jr.

Bachelors Theses and Reports, 1928 - 1970

In recent years there has appeared an increasing number of papers on converting operations as related to thermodynamics. This approach is a powerful, potential tool. However, the development of new ideas and changes must rely on accurate basic information.

Secondary Recrystallization In Copper, James E. Thompson

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to study the conditions under which secondary recrystallization will take place in copper. The variables considered were the time annealing, the temperature of annealing, and the degree of cold work undergone by the specimen before it was subjected to the heat treatment.

Stress-Induced Martensite Transformation In An Alloy Of The Copper-Aluminum-Nickel System, Gary D. Alexander

Bachelors Theses and Reports, 1928 - 1970

It was intended that the alloy be thoroughly investigated for martensite transformation that would make the alloy "super-elastic," but due to the many difficulties that arose this was not possible. Attempts to grow a single crystal from the cast alloy were not successful because of the difficulties that were encountered with the Kanthal resistance furnace (referred to later). Consequently, the growing of the single crystal was abandoned and the alloy was tested in the poly-crystalline form.

Electrolytic Refining Of Copper By The Series System, Jerome Yopps

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis investigation was to determine the characteristics of the series system of electrolytic refining of copper.

The Application Of Amalgam Metallurgy To Copper, Barry J. Hansen

Bachelors Theses and Reports, 1928 - 1970

The object of this investigation is the application of "Amalgam Metallurgy" to the extraction of copper from its ores. "Amalgam Metallurgy" as defined by Hohn is the use of liquid mercury in the extraction of metals. The ore under study was from the Kelly Mine in Butte, Montana and contains about 1.0% copper of which about 0.1% is acid soluble.

Effect Of Recovery On The Recrystallized Grain-Size Of High Purity Aluminum, Rodney L. Helterline

Bachelors Theses and Reports, 1928 - 1970

When a cold-worked metal is annealed, it’s physical properties hange as a result of a new grain structure. The annealing treatment is divided into three stages according to the changes that occur in the distorted metal: (1) recovery, (2) recrystallization, and (3) grain growth.

The Application Of Electric Energy To The Metallurgy Plants In Montana, Edwin J. Duncan

Bachelors Theses and Reports, 1928 - 1970

Since the year 1800, metallurgy has been affiliated with electricity. In fact, the two industries have grown side by side, being naturally dependent upon each other and having a parallel growth.

The Construction And Operation Of A Universal Specimen Mount With Protective Lead Shield For The Purpose Of Determining Pole Figures Using The Schulz-Decker Transmission Technique, Richard L. Fausner

Bachelors Theses and Reports, 1928 - 1970

It was the purpose of this study to construct a universal mount, to construct a protective lead shield, to operate the instrument, and to provide a pole figure using the transmission method of Schulz and Decker. There are at present several lengthy x-ray methods of determining the grain orientation of metals. These methods are mainly photographic. In order to provide a rapid means of obtaining the necessary information concerning the grain orientation of a metal, a universal mount was constructed.

Host Rocks And Gangue Minerals Associated With Copper Deposits In Plutonic Igneous Rocks, Richard D. Montgomery

Bachelors Theses and Reports, 1928 - 1970

All of the information on the various districts has come directly from published reports. The investigation was suggested by Mr. Forbes Robertson. The geographical extent of the deposits was confined to the western United States. Many of these deposits are of the disseminated porphyry type. A few of the de­posits, such as at Butte, Montana, were of the fissure vein type.

The Effect Of Manganese On The Age Hardening Of Aluminum-Copper Alloys, Keith P. Burgess

Bachelors Theses and Reports, 1928 - 1970

It is known that age-hardening occurs in alloys of the solid solution type containing a hardening constituent, of a metal or metallic compound which is more soluble in the solvent phase at higher tempertures than at lower temperatures.

The Benefication Of A Low-Grade, Montana Scheelite Ore, Walter G. Parker

Bachelors Theses and Reports, 1928 - 1970

The increasing importance of tungsten as an industrial metal and the recent discoveries of extensive deposits of low-grade tungsten ores in Montana led to the investigation which is reported in this paper. The purpose of this investigation was to determine if a saleable concentrate could be obtained from one of these low-grade, Montana scheelite ores.

Variation Of Induction And Hysteresis Curves For The Heusler Alloy, Cu2mna1, Ford W. Knight

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation is to determine the fundamental magnetic characteristics of induction and hysteresis, for the alloy Cu₂MnAl. This is a ternary, ferromagnetic Heusler alloy. The problem is not only to determine these characteristics for the alloy as-cast but to heat treat it and observe the manner in which different heat treat­ments affect these two fundamental magnetic characteristics.

The Effect Of Ferric Iron Upon The Current Efficiency And The Deposition Of Copper In The Electrowinning Of Copper From Copper Sulphate Solutions, James L. Owings

Bachelors Theses and Reports, 1928 - 1970

In the hydrometallurgy of copper, probably the most widely used method for the precipitation of copper is by electrolysis using insoluble anodes. The process is similar in many respects to the electrolytic refining of copper; one of the main differences is the use of insoluble anodes in electrowinning as compared to the use of impure copper anodes in electrorefining. Impurities, however, are common to both processes. The nature of these impurities differ and the problem of purifying the electrolyte is also different.

The Effect Of Iron Upon The Electrowinning Of Copper With An Amalgam Electrode, John A. Alexander

Bachelors Theses and Reports, 1928 - 1970

Current commercial use of the mercury cathode cell is limited to two types of electrolytic sodium cells-­the Castner cell and the Sorenson cell. Mercury as a cathode medium has also found application in polarographic analysis, a method of a simultaneous quantitative and qualitative analysis of several metal components of solution.

An Investigation Of The Hardening Properties Of Some Alpha Copper Indium Alloys, Charles W. Mcpherson

Bachelors Theses and Reports, 1928 - 1970

Precipitation hardening alloys has assumed a major role in modern da^y development of alloys. In his search for stronger, harder materials, the metallurgist has often been limited by the cost of metals which posses the needed properties.

The Electrolytic Purification Of An Impure Cadmium Sulfate Solution With A Cell Utilizing A Mercury Cathode And A Lead Anode, W. D. Mcmaster

Bachelors Theses and Reports, 1928 - 1970

Cadmium is produced solely as a by-product and all cadmium of commerce is obtained from zinc ores. It is a rare occurrence when zinc deposits are found which do not contain some cadmium.

Polarographic Analysis Applied To Metallurgical Solutions And Products, Donald W. Johnson

Bachelors Theses and Reports, 1928 - 1970

The polarograph has been applied to a large number of chemical and metallurgical analyses, and is especially applicable to solution control analysis and to the deter­mination of minute quantities of ions in the presence of large amounts of other ions.

Vacuum Distillation Of Zinc And Cadmium From Zinc Leach Purification Cake, Stiles R. Slosson

Bachelors Theses and Reports, 1928 - 1970

The term "vacuum distillation" is used to des­cribe the process employed when certain elements are separated either from their mother compounds or from one another by distilling them under reduced atmos­pheric pressure.

Ferromagnetic Alloys In The System Cu-Mn-Zn, W. Michael Yim

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation is to determine whether ferromagnetic alloys exist in the ternary sys­tem Cu-Mn-Zn analogous to the other Heusler alloys. The work in this thesis is a preliminary investi­gation on these alloys using a common metallographic re­search technique and augmented with X-ray methods.

Mineralization Of The Bonanza Mine, H. M. Callaway

Bachelors Theses and Reports, 1928 - 1970

The Bonanza mine of the Emery mining district in Powell County is on the largest veins in the area, and is developed to a depth of 680 feet by an incline shaft following the dip of the structure. Sulfide ores carrying gold and silver values are mined throughout the area which is easily accessible by road from Deerlodge, Montana, ten miles west of the district.

An Investigation Into The Precipitation Of Copper From Mine Water By Cupric Copper Reduction, And The Subsequent Precipitation Of Copper As Cuprous Chloride, Jack T. Gentry

Bachelors Theses and Reports, 1928 - 1970

The objective of this thesis is to determine the possibility of applying a different method to the re­covery of the copper dissolved in the Butte mine waters, and thereby precipitate a purer cement copper with greater efficiency and less iron consumption.