Metallurgy Commons^™

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Effects Of Ac Interference On Pipelines Under Cathodic Protection And Cathodic Disbondment Of Pipeline Coatings, Tanner Laughorn

Williams Honors College, Honors Research Projects

This project is split into two parts. The first revolves around AC interference on pipeline steel under cathodic protection. The corrosion rate of steel samples will be measured after they are exposed to varying levels of AC interference and cathodic protection. The results will be used to help develop new guidelines for appropriate cathodic protection of steel pipelines. The second part of this project revolves around the cathodic disbondment of pipeline coatings while under cathodic protection. The disbondment distance, electrolyte pH, and electrochemical impedance spectroscopy will be tested for multiple industry standard coatings under various conditions. The results will be …

Causational Analysis And Rectification Of Issues Concerning Scale Formation On Hot-Rolled Straight Bar Product And Its Effects On Ultrasonic Testing, Riley Mattix

Williams Honors College, Honors Research Projects

At Charter Steel's NDT Processing Plant located in Cleveland, Ohio, a concern has arisen regarding the recently implemented bar straightening and UT (Ultrasonic Testing) equipment. A substantial amount of mill scale, which is typically removed during the straightening process, is persisting on the bar’s surface throughout most of the NDT procedure. This lingering scale has been observed to flake off once inside the UT equipment, introducing unwanted noise and phantom peaks into the UT readings. Additionally, thick mill scale has been identified as a source of background interference in the received data. In contrast, bars that have been subjected to …

Corrosion Inhibitors: Mitigating The Degradation Of Rebar, Jake R. Hughes

Williams Honors College, Honors Research Projects

Our conjecture was twofold: first, that two compounds historically used as food preservatives could act as environmentally friendly inhibitors against rebar corrosion, and second, that molecular properties have a quantifiable influence on inhibition efficiency (%IE). To evaluate the two compounds, cyclic potentiodynamic polarization was used to determine corrosion current density (i_corr) and %IE. The “green” inhibitor candidates included sodium metabisulfite and ascorbic acid, which yielded maximum %IE values of -123900% and 91%, respectively. Results indicated that sodium metabisulfite is not a suitable inhibitor, while ascorbic acid showed potential to extend reinforced concrete’s design life without posing health or …

Application Of Conductivity Techniques For Interlayer Discontinuity Detection In Additively Manufactured Metal Materials, Joshua D. Newell, Riley R. Myers

Williams Honors College, Honors Research Projects

Additive manufacturing is becoming increasingly more popular and efficient. One drawback is the possibility of interlayer discontinuities forming in the material. A non-destructive technique utilizing the changing resistivity of the material as discontinuities appear was used to detect those discontinuities and was verified through additional testing of manually added through-thickness discontinuities. This technique has been proven to be useful in understanding fatigue crack growth of conventional metal and composite structures. Experimental investigation of fatigue in steel with an edge notch has been performed using these techniques to understand source and location of crack formation and growth in conventional material. Application …

Recycling Metal Chips Into Usable Materials, Alex Mortensen, Ben Mortensen

Williams Honors College, Honors Research Projects

This report entails the scope, design considerations, and plans for creating a metal chip converter into metal briquettes. The construction is a set of machines with multiple processes to make the conversion happen. The process includes washing fine metal chips, drying them off, compressing them, and melting them down into usable briquettes. This project is intended to make a simple process to recycle metal chips into usable material for reuse. The project's objective is to reduce the costs of storage and recycling waste by offering a solution to recycle it into materials the shop can reuse.

Austenitic, Duplex, And Lean Duplex Stainless Steel Critical Pitting Temperature In Simulated Concrete Environment, Bobby Giebel

Williams Honors College, Honors Research Projects

In this work, the critical pitting temperature (CPT) will be observed for a selection of austenitic (316LN and 24100) and duplex (2205), and lean duplex (2304, 2001) stainless steels in simulated concrete pore solution. To study the influence of temperature on the pitting stability of the stainless steels, three temperatures were tested: 25oC, 45oC, and 65oC for cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS). Electrochemical properties of the interfaces we studied via EIS analysis. Kinetics were studied via CPP testing. To reveal the critical pitting temperature of the stainless steels, cyclic thermammetry was used. Characterization of the pits …

Induction Brazing, Austin Squire, Scott Compton, Logan Hathaway, Michael Fleming

Williams Honors College, Honors Research Projects

Our team would like to research and explore ways of designing a portable device that uses induction heating/brazing to connect two exhaust pipes together.

Application Of Laser Assisted Ultrasonic Nanocrystal Surface Modification On Aluminum And 3d Printed Titanium, Eman Hassan, Thomas Crouse

Williams Honors College, Honors Research Projects

A novel surface treatment, laser assisted ultrasonic nanocrystal surface modification (LA-UNSM), has proved effective in increasing surface hardness, and fatigue life. The objective of this research is to determine the effectiveness of this process on components created with additive manufacturing. To accomplish this, we investigated the effectiveness of LA-UNSM treatment on aluminum, a common 3d printed metal, and the effectiveness of LA-UNSM processing on 3d printed titanium. We first conducted our own literature review to assess the practicality of using this same treatment on aluminum. We then treated traditionally manufactured aluminum at varying levels of laser intensity to determine if …

Jominy Hardenability Tester Redesign, Dennis Kopacz, Shadoe Beatty, Thomas Benenati, Jared Mclean, Matthew Yokosuk

Williams Honors College, Honors Research Projects

Our project is Redesigning a Hardenability Tester. The goal of this project is to figure out how to incorporate an intensive quenching system to the current design from last years group. An intensive quench is a new system that is safer to harden steel and it hardens steel more effectively than other quenching processes. This will be achieved through testing the initial design to make sure it is able to run. After that as a group we will take this system through a design process to introduce a safe process of intensive quenching to the tester.

Jominy Hardenability Tester With In-Situ Heating, Luke Allen

Williams Honors College, Honors Research Projects

This project centers on building a Jominy Hardenability tester with In-Situ heating for the manufacturing lab at the University of Akron. A new process and setup will be designed using engineering concepts in order to make the testing more efficient and safer for the teaching and testing of metal hardness. The current Jominy testing setup has efficiency issues within the transfer of specimen from induction heater to testing rig. Our design will simplify the design by creating a test rig that removes the traveling aspect of the specimen which will limit the amount of premature cooling done and will be …

The Corrosion Behavior Of Aisi 304l Stainless Steel In Simulated Concrete Pore Solution. And A New Marketing Plan For Stainless Steel Rebars., Kenny Aronson

Williams Honors College, Honors Research Projects

The purpose of this project is to study the corrosion behavior of AISI 304L stainless steel, and to present the results for a new marketing strategy for a steel rebar manufacturer. This experiment involved the usage of cyclic potentiodynamic polarization tests to investigate the effect of chlorides on the pitting corrosion behavior of AISI 304L stainless steel in a simulated concrete pore solution with 3.5 wt.% chlorides. The results of this experiment showed that the chlorides caused a large increase in the corrosion current density of AISI 304L stainless steel indicating increased susceptibility to general corrosion and pitting corrosion. The …

Table Top Dome Tester, Travis Bernard, Sarah Kassinger, Amanda O'Reilly, Scott Salerno

Williams Honors College, Honors Research Projects

The Erichsen Cupping Test was used as a basis to design a dome tester. The intention of a dome tester is to test sheet metal material properties in all directions. This was done by clamping a piece of sheet metal and using a piston and hydraulic press to punch through the material. The force used to punch the material and the height of the deforming material can be gathered and the sheet metal properties can then be calculated. At the end of the project the team was able to successfully design and manufacture a hydraulic dome tester. However, due to …

Galvanic Corrosion In Aluminum/Steel Joints, Maegan Saul

Williams Honors College, Honors Research Projects

As car manufacturers seek to use lighter weight materials, aluminum is being more commonly used in the construction of vehicles. However, the strength of steel cannot be matched and both metals are necessary, leading to the joining of dissimilar metals. This connection of different metals leads to a galvanic coupling and subsequent corrosion of the less noble metal. This project aims to observe the corrosion and galvanic coupling behavior of aluminum alloys and carbon steel so that a model may be produced which can accurately predict the expected responses of the metals in various environments. Better, more accurate modeling of …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Interfacial Corrosion Of Copper And The Formation Of Copper Hydroxychloride, Mary Teague, Shengxi Li, Hongbo Cong

Williams Honors College, Honors Research Projects

Electrical circuitry is an industry, among many others, heavily using the element of copper. Ensuring the mechanical integrity of Cu is crucial, especially in salt environments, for the multifaceted composition of circuits. 4N NaCl solution (equilibrium concentration in ~84% RH) simulated this three-phase system. Rectangular Cu samples were partially immersed in both ambient and continuous lab air sparging atmospheres to understand waterline corrosion of the metal. Open circuit potentials (OCP) were continuously taken during the immersion testing for a maximum of 5 days. A scanning electron microscopy (SEM) equipped with an energy dispersive X-ray spectrometer (EDS), Raman spectroscopy, and 3-D …

Design Of Shape-Conforming Nosecone For Optimal Fluid Flow From Transonic To Supersonic Range, Anna Tombazzi

Williams Honors College, Honors Research Projects

Modern flight vehicles, such as rockets, missiles, and airplanes, experience a force caused by forebody wave drag during the flight. This drag force is induced when the frontal point of each vehicle breaks the pressure wave during flight. Efforts to reduce this wave drag force to improve flight efficiency include modifying the nosecone profile of the flight vehicles to lower the drag force.

This project revolved around creating a design to make the transformation of nosecone shapes from a ¾ Parabolic profile to a ½ Power Series profile possible, mid-flight. Using a novel nosecone assembly, shape memory alloys (SMAs) and …

Pitting Corrosion Of 410 Stainless Steel In Hcl Solutions, Paul D. Krell

Williams Honors College, Honors Research Projects

410 stainless steel (SS) is a material used in HCl services, such as distillation column trays in oil refineries. Unlike other alloys, however, the oil refining industry lacks a good reference for the corrosion rate of 410 SS at the varying HCl concentrations and temperatures the material might experience as trays in crude unit distillation columns. The goal of this project is to fill that knowledge gap. The corrosion behavior of 410 SS in HCl environments of pH 0.50, 1.25, 2.25, 3.25, and 4.25 at temperatures of 38, 52, 79, and 93°C was investigated using several methods. Cyclic potentiodynamic polarization …

Oxidation Resistance Of Nanocrystalline 316l Stainless Steel Processed By High Pressure Torsion, Kevin J. Meisner

Williams Honors College, Honors Research Projects

High Pressure Torsion (HPT) is a materials processing method used to refine the grain size of metallic materials through the application of simultaneous axial and torsional strain. HPT is reported to result in nanocrystalline structure, which the current scientific literature suggests may improve the high temperature oxidation resistance by enhancing diffusion of solutes, particularly Cr, to the surface to form a protective external oxide scale. If oxidation resistance is improved, this possibly allows the use of 316L in oxidizing environments where more expensive alloys are typically used. However, the influence of grain refinement to nanoscale on various properties have been …

The Examination Of Stress Corrosion Cracking In High Strength Carbon Steel Through Combined Mechanical-Electrochemical Testing, Jacob Sines

Williams Honors College, Honors Research Projects

Through the analysis of materials and environments seen in industry a better understanding of the fundamentals behind degradation mechanisms can be observed. The scope of this project was to better understand the fundamentals behind the degradation of high strength pipeline steels in a lab setting to simulate an environment seen in industry. Specifically the degradation mechanisms of high and nearly neutral pH stress corrosion cracking were examined in environments that simulated oil and gas pipelines buried in soil. Experimentation was carried out utilizing X65 carbon steel specimen, a Gamry potentiostat, a CORTEST proof ring, a CORTEST slow strain rate machine, …