Metallurgy Commons^™

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto

Makara Journal of Technology

Potency of Thermoelectric Generator for Hybrid Vehicle. Thermoelectric Generator (TEG) has been known as electricity generation for many years. If the temperature difference occurred between two difference semi conductor materials, the current will flow in the material and produced difference voltage. This principle is known as Seebeck effect that is the opposite of Peltier effect Thermoelectric Cooling (TEC). This research was conducted to test the potential of electric source from twelve peltier modules. Then, these thermoelectric generators were applied in hybrid car by using waste heat from the combustion engine. The experiment has been conducted with variations of peltier module …

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf

Makara Journal of Technology

Magnetic field effect on CaCO3 precipitation is the key parameter in evaluating the effectiveness of Anti-scale Magnetic Treatment (AMT). The purpose of this study was to investigate magnetic fields influence on CaCO3 precipitation in high and low super-saturated CaCO3 solution by varied pH CaCO3 solution using circulation flow fluid system. The observation results in the high super saturated solution (pH 8.5) showed the increase of precipited CaCO3 in magnetized solutions compared to those in non-magnetic solution during circulation process. In the low super-saturated CaCO3 solution (pH 6.4) it was found that magnetic treatment increased CaCO3 precipitation after circulation process. In …

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman

Makara Journal of Technology

This study uses DEA solution to absorb CO2 from the gas flow through the hollow fiber membrane contactors. This study aims to evaluate the performance of hollow fiber membrane contactors to absorb CO2 gas using DEA solution as solvent through mass transfer and hydrodynamics studies. The use of DEA solution is to reduce the mass transfer resistance in the liquid phase, and on the other side, the large contact area of the membrane surface can cover the disadvantage of membrane contactors; additional mass transfer resistance in the membrane phase. During experiments, CO2 feed flows through the fiber lumens, while the …

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian

Makara Journal of Technology

Intermetallic Cu3Sn Phase Layer on Electrode’s Tip of Galvanized Resistance Spot Welding. A resistance spot welding method is commonly used in automotive industries application. In a resistance spot welding method, the copper electrode has a significant role as an electric current carrier for joining thin metal sheet. This research was focused on studying the effect of tin layer at the electrode tip for joining galvanized steel sheet. The main variable of this research is in the thickness of the intermetallic Cu3Sn layer. The result showed that the introduction of tin layer less than 1 μm in thickness on the electrode …

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Simple ML Detector for Multiple Antennas Communication System. In order to support providing broadband wireless communication services against limited and expensive frequency bandwidth, we have to develop a bandwidth efficient system. Therefore, in this paper we propose a closed-loop MIMO (Multiple-Input-Multiple-Output) system using ML (Maximum Likelihood) detector to optimize capacity and to increase system performance. What is especially exciting about the benefits offered by MIMO is that a high capacity and performance can be attained without additional frequency-spectral resource. The grand scenario of this concept is the attained advantages of transformation matrices having capability to allocate transmitted signals power suit …

Effect Of Stress Ratio On The Fatigue Behavior Of A Friction Stir Processed Cast Al-Si-Mg Alloy, S. Jana, Rajiv S. Mishra, J. B. Baumann, G. Grant

Materials Science and Engineering Faculty Research & Creative Works

The effect of friction stirs processing (FSP) on the fatigue life of a cast Al-7Si-0.6 Mg alloy at stress ratios of R = 0 and R = -1 was evaluated. Two types of specimen geometry were used for the FSPed condition, through thickness processed and partial thickness processed. at R = 0, the microstructural refinement enhanced the fatigue life by a factor of 15, whereas at R = -1 the improvement in fatigue life was 5-fold. in light of these observations, various closure mechanisms were examined. © 2009 Acta Materialia Inc.

Increase Of Heat Transfer To Reduce Build Time In Rapid Freeze Prototyping, Ming-Chuan Leu, Sriram Praneeth Isanaka, Von Richards

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Reduction of part build time in the Rapid Freeze Prototyping (RFP) process, which fabricates a 3D ice part layer-by-layer by depositing and freezing water droplets, has been achieved by increase of heat transfer. Three mechanisms have been experimentally investigated: 1) cooling the substrate, 2) use of forced convection, and 3) use of a chilling plate. Cooling the substrate is effective for parts of small heights but becomes ineffective with increase in part height. Forced convection produced desirable reduction in part build time but with the undesirable formation of frost on the built ice part. The use of chilling plate to …

Dislocation-Particle Interaction At Elevated Temperatures, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

There is a major difference in dislocation-particle interaction at low and elevated temperatures. This article will only discuss the historic development of and the current understanding of the interaction of dislocations with non-shearable particles at elevated temperatures. It will show that the understanding of repulsive-attractive transition in dislocation-particle interaction at elevated temperatures has undergone remarkable change and is at a level where a physics-Based high-temperature strengthening framework can be developed. © TMS 2009.

Improved Predictive Power Control Of Cdma System In Rayleigh Fading Channel, Adit Kurniawan, Iskandar Iskandar, Sayid Machdar

Makara Journal of Technology

In this paper an improved prediction-based power control is proposed for code division multiple access (CDMA) systems in Rayleigh fading channel environments. One of the most serious problems which degrades the performance of power control algorithm is the effect of feedback delay. To overcome the effect of feedback delay, power control needs to employ prediction algorithm which utilises the correlation property of the past channel samples measurements to predict the future sample values. In CDMA power control, however, the correlation property of channel measurements is destroyed because the transmit power is continuously updated for each power control interval. The prediction …

On The Performance Of Svd-Dwt Based Digital Video Watermarking Technique With Semi-Blind Detector, Tarzan Basaruddin, Della Maulidiya

Makara Journal of Technology

On the Performance of SVD-DWT Based Digital Video Watermarking Technique with Semi-Blind Detector. This paper presents a watermarking technique for digital video. The proposed scheme is developed based on the work of Ganic and Chan which took the virtue of SVD and DWT. While the previous works of Chan has the blind detector property, our attempt is to develop a scheme with semi-blind detector, by using the merit of the DWT-SDV technique proposed by Ganic which was originally applied to still image. Overall, our experimental results show that our proposed scheme has a very good imperceptibility and is reasonably robust …

Lipid Production From Microalgae As A Promising Candidate For Biodiesel Production, Arief Widjaja

Makara Journal of Technology

Recently, several strains of microalgae have been studied as they contain high lipid content capable to be converted to biodiesel. Fresh water microalgae Chlorella vulgaris studied in this research was one of the proof as it contained high triacyl glyceride which made it a potential candidate for biodiesel production. Factors responsible for good growing of microalgae such as CO2 and nitrogen concentration were investigated. It was found that total lipid content was increased after exposing to media with not enough nitrogen concentration. However, under this nitrogen depletion media, the growth rate was very slow leading to lower lipid productivity. The …

Environmental Remediation Full-Scale Implementation: Back To Simple Microbial Massive Culture Approaches, Agung Dhamar Syakti, Mohamad Yani

Makara Journal of Technology

Using bioaugmentation and biostimulation approach for contaminated soil bioremediation were investigated and implemented on field scale. We combine those approaches by culturing massively the petrophilic indigenous microorganisms from chronically contaminated soil enriched by mixed manure. Through these methods, bioremediation performance revealed promising results in removing the petroleum hydrocarbons comparatively using metabolite by product such as biosurfactant, specific enzymes and other extra-cellular product which are considered as a difficult task and will impact on cost increase.

Preparation Of Radioactive Gold Nanoparticle By Neutron Activation, Rohadi Awaludin

Makara Journal of Technology

Preparation of Radioactive Gold Nanoparticle by Neutron Activation. It was reported that gold nanoparticle could be used for cancer therapy using thermal effect. It is possible to kill cancer cells using radiation of radioisotope. Study on preparation of radioactive gold by neutron activation at central irradiation position (CIP) of G.A. Siwabessy reactor with neutron flux 1.26 x 1014 neutron s-1cm-2 has been carried out. It was revealed that a radioisotop of gold (198Au) was produced by neutron activation from natural gold. Calculation results showed that 198Au with radioactivity of 0.366 Bq, 2.93 Bq, 9.90 Bq and 23.4 Bq was produced …

Implementation Of Web Cam As Motion Detector With Directshow Interfacing, Yonatan Santoso, Iwan Setiyawan, Victor N. Papilaya

Makara Journal of Technology

Implementation of Web Cam as Motion Detector with DirectShow Interfacing. One of many ways to take control a web cam is by using DirectShow which is integrated in DirectX. DirectShow acts like an API therefore it is easier to use. Afterwards, web cam will be implemented to detect object’s motion as well as camera surveillance. The method is by comparing a reference image with other image which is taken lately. If there are differences between those image it means motion has been detected.

Thermal Stability Of Clay's Galleries In Polypropylene - Clay (Montmorillonite) Nanocomposites Using Polypropylene-Gmaleic Anhydride As Compatibilizer, Sotya Astutiningsih, Pandu Lanang Kinasih, Arief Cahyo Wibowo

Makara Journal of Technology

Thermal Stability of Clay's Galleries in Polypropylene - Clay (montmorillonite) Nanocomposites using Polypropylene-g- Maleic Anhydride as Compatibilizer. Superior properties of food packaging can be achieved using nanocomposite technology. However, fabrication of this materials are complex and expensive. Long term objectives of this research is the synthesis of low cost polypropylene clay nanocomposites (PPCN) via a short-cut method known as ‘cascade engineering’. Cascade engineering principle in PPCN fabrication is performed by using compatibilizer (to enable the mixing of PP and clay) masterbatch, and PPCN in one pot process using melt mixer. This paper present the experimental results using small-angle x-ray diffraction …

Induction And Conduction Electromagnetic Waves Caused By Lightning Strike On The Low Voltage Network, Reynaldo Zoro

Makara Journal of Technology

Induction and Conduction Electromagnetic Waves Caused by Lightning Strike on the Low Voltage Network. Direct and indirect lightning strikes can disturb and induce low voltage overheadlines and it can produced overvoltage due to traveling waves along the lines. This overvoltage can damage the equipments connected to it. It was recorded that there were already a lot of damages of electronic equipments and arrestesr located inside the building of Lightning Measurement Station at Mnt. Tangkuban Perahu. Most of the overvoltage which was developed on the low voltage lines were coming from indirect lightning strike nearby due to the fact that most …

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing And Economic Analysis., Asep Handaya Saputra, Ardiansyah Ardiansyah

Makara Journal of Technology

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing and Economic Analysis. Power plant Muara Tawar will substitute the need of oil fuel to gas as form of economizing and energy conservation. The nearest supply point to fulfill natural gas needed on Muara Bekasi. So that Power Plant Company needed to develop gas pipeline infrastructure to joining the point.The purpose of this study is to create a system of gas transmission pipeline from gas supply point at Muara Bekasi to Power Plant Muara Tawar trough to offshore area. Design of gas transmission pipeline is started with technical data collection and …

Shielding Effectiveness Of Superalloy, Aluminum, And Mumetal Shielding Tapes, Cindy Suit Cheung

Master's Theses

Using MIL-HDBK-419A, MATLAB and Nomographs, Shielding Effectiveness for the Magnetic Field, Electric Field, and Plane Wave were calculated over a frequency range from 10 Hz to 1 GHz. The three shielding tapes used included superalloy, aluminum, and mumetal. Calculations for Shielding Effectiveness involve the computation of Absorption Loss, Reflection Loss, and Re-Reflection Correction Factor. From the outcome of the calculations, it was suitable to conclude that all three metals fulfill the 40 dB Shielding Effectiveness requirements for SGEMP fields for frequencies greater or equal to 1 MHz. Accordingly, all three shielding tapes provide at least 40 dB of shielding to …

The Effect Of Silicon Content On Impact Toughness Of T91 Grade Steels, Ajit K. Roy, Pankaj Kumar, Debajyoti Maitra

Mechanical Engineering Faculty Research

The impact resistance of silicon (Si)-containing modified 9Cr-1Mo steels has been investigated within a temperature regime of -40 to 440°C using the Charpy method. The results indicate that the energies absorbed in fracturing the tested specimens were substantially lower at temperatures of -40, 25, and 75°C compared to those at elevated temperatures. Lower impact energies and higher ductile-to-brittle-transition-temperatures (DBTTs) were observed with the steels containing 1.5 and 1.9 wt.% Si. The steels containing higher Si levels exhibited both ductile and brittle failures at elevated temperatures. However, at lower temperatures, brittle failures characterized by cleavage and intergranular cracking were observed for …

Corrosion Research On Rock Bolts And Steel Sets For Sub-Surface Reinforcement Of The Yucca Mountain Repository, Dhanesh Chandra, Jaak J.K. Daemen

Publications (YM)

Underground nuclear waste storage repositories generally use steels and super alloys for various structural members and storage containers. These materials are susceptible to corrosion due to seepage of water. We studied rock bolt materials for reinforcing tunnels and containment materials for storing nuclear waste materials. In general, the design of underground support materials for tunnels are mainly based on mechanical behavior of the materials, but not much was known about the interaction of the seepage YM waters with the structural members under various conditions in the tunnels. The sources of water in the Yucca Mountain (YM) repository are due to …

Fatigue Of Friction Stir Welded Lap Joints With Sealants, Kenneth Doering

Masters Theses

"A lack of understanding of corrosion fatigue in friction stir welded aluminum joints prevents friction stir welding from being implemented in aerospace applications. Fatigue testing reveals a 60-75% reduction in the fatigue life of friction stir welded aluminum lap joints immersed in 3.5% NaCl solution (corrosion fatigue) compared with that of lap joints tested in ambient air. The loss in fatigue life is attributed to accelerated fatigue cracking due to hydrogen environment embrittlement. Two polymer sealant candidates are investigated: silicone rubber and nylon-11. Both sealant candidates can be applied prior to welding and seal the faying surface gaps in lap …

The Effect Of Near-Surface Metallurgy On The Machinability Of Cast Iron, William Dewey Peach

Masters Theses

"The increasing performance and durability of cutting tool inserts have created metallurgical challenges for production foundries to produce near-net shaped castings within strict dimensional tolerances. In order for foundries to take full advantage of the increased cutting speed capabilities, it becomes necessary to reduce machining allowances and produce much more stable casting surfaces. To accomplish this, a better understanding of the complex microstructures formed within the first 0.120 in. (3 mm) of the mold/metal interface (as-cast surface) is necessary. The goal of the work presented here was to examine the microstructures formed in the near-surface region of gray iron castings, …

An Analysis Of Silver Candlesticks From A Casting Point Of View: Originals, Copies, Forgeries, Jaromir Audy, Emil Evin

Research outputs pre 2011

Collecting silver artefacts has traditionally been a very popular hobby. Silver is addictive, therefore the number of potential collectors and investors appears to grow each year. Unfortunately, increases in the interest and buying potentials resulted in a number of forgeries manufactured and introduced to the open antique market. The items such as early silver candlesticks dictate a very high price, for many high quality fakes show very good appearances and matching similarities with originals. Such copies are traditionally manufactured by casting using the original items as patterns. Small details and variances in design features, position and shape of hallmarks, including …

Fracture Toughness, Crack-Growth-Rate And Creep Studies Of Alloy 276, Joydepp Pal

UNLV Theses, Dissertations, Professional Papers, and Capstones

Austenitic nickel-base Alloy 276 had been proposed to be a candidate structural material within the purview of the nuclear hydrogen initiative program. A mechanistic understanding of high temperature tensile deformation of this alloy has already been presented in an earlier investigation. The current investigation has been focused on the evaluation of crack-growth behavior, fracture toughness, stress-corrosion-cracking and creep deformation of this alloy as functions of different metallurgical and mechanical variables. The results of crack-growth study under cyclic loading indicate that this alloy exhibited greater cracking tendency with increasing temperature at a constant load ratio (R). However, the effect of temperature …

Effects Of Mechanical And Metallurgical Variables On Creep, Fracture Toughness And Crack Growth Behavior Of Alloy 617, Muhammad Hasibul Hasan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nickel base Alloy 617 has been identified to be a suitable structural material for heat exchanger applications in both hydrogen and electricity generation using nuclear heat. A maximum operating temperature of 950°C has been specified by department of energy (DOE) for both applications to achieve a maximum possible efficiency. Therefore, an extensive investigation has been pursued to evaluate time-dependent-deformation (Creep) of this alloy as functions of temperature and applied load. The results indicate that this alloy exhibited severe creep deformation, characterized by development of an instantaneous tertiary creep region at 850 and 950°C under applied stresses corresponding to its 35% …

Spectroscopic Investigation Of Palladium-Copper Bimetallic Systems For Pem Fuel Cell Catalysts, Timo Hofmann

UNLV Theses, Dissertations, Professional Papers, and Capstones

One of the main barriers to commercialization of polymer electrolyte membrane fuel cells systems is cost, which is largely due to the need of platinum (Pt)-containing catalysts. In this thesis we investigate bimetallic systems consisting of a base metal (copper) and a noble metal (palladium) that, as an alloy on the nanoscale, mimic the electronic properties that make Pt desirable as a catalyst.

We present a detailed investigation of the electronic structure of carbon-supported Pd/Cu nanoparticle catalysts, model bilayer thin film systems, alloys, and various metal reference samples. We have investigated the valence band structure of the catalysts using a …

Preliminary Investigation Of Metallurgical Structure And Mechanical Properties Of Cast Iron With High Aluminum Content, Pavel Bizyukov

Dissertations and Theses @ UNI

The problem addressed in this study analyzed various properties of cast iron with high aluminum content. This grade of cast iron was projected for use in the automotive industry. The benefits provided with high aluminum content are lower specific gravity and relatively inexpensive source materials with the potential of achieving high temperature properties.

The purpose of the study was to select suitable source materials and determine an effective melting technique, to investigate metallurgical structure and mechanical properties at given chemical composition, and, finally, to provide elaborate results.

The design of the experiment included the following steps: (a) selection and preparation …