Metallurgy Commons^™

Effect Of Elemental Additions On The Microstructure, Macrostructure, And Mechanical Properties Of Gray Iron, August E. Rautmann

College of Graduate Studies: Theses & Dissertations

Gray iron is composed primarily of an iron matrix and flake graphite, with the higher percentage of volume taken up by the iron matrix. The iron matrix is the transformation product of austenite, and this prior austenite structure is understood to affect the final grain structure. Grain structure affects the properties of a metal, with a finer structure recognized as beneficial for most properties. Thus, the refinement of austenite structure has potential in improving the material properties of gray iron. This study aims to advance the limited knowledge about the control of austenite grain size via elemental additions. Building off …

Material Extrusion 3d Printing Of Metal Alloy: Material, Methods And Application., Sihan Zhang

Electronic Theses and Dissertations

Material extrusion (MEX) additive manufacturing presents a promising pathway for producing metal components with complex geometries while avoiding the safety hazards associated with loose powder handling in conventional metal additive manufacturing processes. This dissertation investigates the development and optimization of MEX processes for aluminum alloys, addressing critical challenges in feedstock formulation, printing parameter optimization, and post-processing strategies. Three distinct approaches were explored to advance the capabilities of aluminum MEX: filament-based processing of 6061 aluminum, paste-based extrusion of 6061 aluminum, and development of a novel aluminum-magnesium-tin alloy system for space manufacturing applications. The filament-based approach successfully demonstrated the production of 6061 …

Magnetically Impelled Arc Butt Welding And Straight Tube Butt Welding Analysis Of Boiler Grade Tube Joints, Santhosh Kumar S

Theses and Dissertations

Boiler-graded tubes of T11, T12, T91, and T92 materials with a thickness of 4.5 mm thick and 44.5 mm outer diameter were selected for the Straight Tube Butt Welding process using Hot Wire (STBW-HW) and Cold Wire (STBW-CW) conditions. Moreover, the research investigates and compares the welding characteristics of dissimilar T11 and T91 boiler-graded tubes using STBW - HW & Magnetically Impelled Arc Butt (MIAB) welding techniques. Similar and dissimilar welding was performed in STBW – HW & CW conditions.

In dissimilar welding, the tensile strength was higher in the T11-T91 STBWHW joints of 663 MPa than in the T12-T92 …

Effect Of Alloying Additions On Austenite Refinement In Nickel-Alloyed Ductile Cast Irons, Adnan Adib Aahamed

College of Graduate Studies: Theses & Dissertations

The benefits associated with the application of ductile irons are significantly attributed to the control of microstructures, with refinement of austenitic matrix during solidification playing a significant role. Nickel alloyed ductile irons are attractive due to their potential for high ductility and suitability for potential high-temperature applications with stable austenitic microstructure. Refinement of austenite grain structure is thus important to enhance the mechanical properties of the alloyed ductile iron. This research investigates the impact of in-mold additions of different alloying elements on the austenite morphology and grain refinement of nickel-alloyed ductile iron along with the associated mechanical properties. A hypoeutectic …

A Novel Technique For Improved Measurement Of Graphite And Inclusions In Ductile Iron Contaminated By Boron, Chase Schroeder, Colleen Lehrer, Simon Lekakh, Laura Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The highly heterogeneous microstructure of ductile iron in casting includes graphite particles, non-metallic inclusions, microporosity, and other features, such as carbides distributed in the ferrite–pearlite matrix. Determination and comprehensive quantification of microstructural features are practically important however challenging. An advanced methodology based on an automated SEM/EDX analysis was developed and compared to the standard optical imaging method. In addition to backscattered electron contrast, sensitive to atomic number, a novel methodology added EDX data to identify and classify the multiple structural features at micron resolution thresholding. To quantify the shape of individual phases, the eight chord raster algorithms was used and …

Computational Modeling Of High Yttrium Refractory High Entropy Alloy Microstructures, Kaleb C. Ryan, Marissa M. Baker

College of Engineering Summer Undergraduate Research Program

Refractory high entropy alloys (RHEAs) are advanced metals made up of five or more principal elements in roughly equal amounts. The microstructural effects of alloying with yttrium as a principal element for RHEAs are currently not well understood. This project compared RHEA microstructures from literature with simulations using the High Entropy Alloy Predicting Software (HEAPS), which computes 10 screening criteria to predict the microstructure of a RHEA composition. The accuracy of HEAPS predictions was assessed by comparing them with experimentally validated microstructures found in literature. A combination of criteria was found to have a 95.8% accuracy rate, and a new …

Ijmc/Fef Student Research Competition: Understanding The Effect Of Boron On Graphite Nodularity And Distribution In Ductile Iron Castings, Chase Schroeder, Colleen Lehrer, Simon Lekakh, Laura Bartlett

Materials Science and Engineering Faculty Research & Creative Works

Ductile iron is renowned for its superior mechanical properties, higher strength, and ductility, combined with excellent castability and the economy of using a scrap melting process. The matrix structure as well as morphology and distribution of graphite nodules significantly influences mechanical properties of as-cast ductile iron. Boron contamination of the scrap supply has presented some difficulties in controlling the microstructure and mechanical properties of certain gray and ductile iron grades. In the current study, the effect of boron levels up to 95 ppm was determined on graphite nodularity and distribution in as-cast ductile iron castings as a function of section …

The Characterization And Nanomechanical Properties Of Microstructurally Complex Systems, Kerry Ann Baker

Theses and Dissertations--Chemical and Materials Engineering

Since the dawn of civilization, the use of metals has played an integral role in the evolution of human society. Over the years, and with the introduction of new engineering and science, we have learned how to combine metals to create new metallic systems. We have expanded our understanding of dealloying and chemical reactions, and, in doing so, we created nanoporous metals. Our use of metals has evolved from basic alloys such as bronze and steel to more complex alloys such as multi-principal element alloys. Nanoporous gold is an advanced metallic system that can be created through the dealloying process. …

Microstructural Investigation Of The Influence Of Geometry On The Mechanical Reliability Of Additively Manufactured Metals, Tracy Connor Varney

Theses and Dissertations--Chemical and Materials Engineering

The adoption of additive manufacturing across a wide range of fields is ever-increasing, allowing for solutions that were previously impossible to achieve. This dissertation demonstrates the wide range of macro- and micro- characterization techniques used to investigate several precipitation strengthened AM alloy systems. While AM allows for nearly unlimited design freedom, this brings along its own issues as the interplay between scan strategy and part geometry is less well known. In this work, a novel thin-wall dogbone geometry was utilized to study one type of complex geometry observed in a large portion of AM focused designs. The mechanical behavior of …

A High-Strength Precipitation Hardened Cobalt-Free High-Entropy Alloy, Matthew Luebbe, Jiaqi Duan, Fan Zhang, Jonathan Poplawsky, Hans Pommeranke, Maalavan Arivu, Andrew Hoffman, Mario Buchely, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Recent studies on precipitation-hardened high-entropy alloys (HEAs) demonstrate their high strength and thermal stability, making them promising materials for high-temperature structural applications such as nuclear reactors. However, many existing HEAs contain cobalt (Co), which is unsuitable for nuclear applications because of the long-term activation issue of Co. Co is also expensive and considered a critical material for other applications. Therefore, it is desired to exclude Co from the composition. a Co-free (Fe0.3Ni0.3Mn0.3Cr0.1)88Ti4Al8 HEA was developed and studied in this work. in contrast to previous Co-free HEAs, this alloy is close to Equi atomic in its composition and promises a more …

Physics-Based Crystal Plasticity Model For Predicting Microstructure Evolution And Dislocation Densities, Juyoung Jeong

LSU Doctoral Dissertations

This work presents three different studies investigating plastic deformation mechanisms in metals and alloys using crystal plasticity finite element (CPFE) modeling. The first study presents a new nonlocal crystal plasticity model for face-centered cubic single crystals under heterogeneous inelastic deformation. The model incorporates generalized constitutive relations that incorporate the thermally activated and drag mechanisms to cover different kinetics of viscoplastic flow in metals and describes the plastic flow and yielding of single-crystals using dislocation densities. The model is compared to micropillar compression experiments for copper single crystals and clarifies the complex microstructural evolution of dislocation densities in metals. The second …

Materials-Processing Relationships For Metal Fused Filament Fabrication Of Ti-6al-4v Alloy., Paramjot Singh

Electronic Theses and Dissertations

Additive manufacturing (AM) is at the mainstream to cater the needs for rapid tooling and small-scale part production. The metal AM of complex geometries is widely accepted and promoted in the industry. While several metal AM technologies exist and are matured to a level where expectation in terms of design and properties are possible to realize. But the metal AM suffers from the heavy expense to acquire equipment, isotropic property challenges, and potential hazards to work with loose reactive metal powder. With this motivation, the dissertation aims to develop the fundamental aspects to print metal parts with bound Ti-6Al-4V powder …

A Study On Ultrasonic Energy Assisted Metal Processing : Its Correeltion With Microstructure And Properties, And Its Application To Additive Manufacturing., Anagh Deshpande

Electronic Theses and Dissertations

Additive manufacturing or 3d printing is the process of constructing a 3-dimensional object layer-by-layer. This additive approach to manufacturing has enabled fabrication of complex components directly from a computer model (or a CAD model). The process has now matured from its earlier version of being a rapid prototyping tool to a technology that can fabricate service-ready components. Development of low-cost polymer additive manufacturing printers enabled by open source Fused Deposition Modeling (FDM) printers and printers of other technologies like SLA and binder jetting has made polymer additive manufacturing accessible and affordable. But the metal additive manufacturing technologies are still expensive …

Process-Property-Microstructure Relationships In Laser-Powder Bed Fusion Of 420 Stainless Steel., Subrata Deb Nath

Electronic Theses and Dissertations

Laser-powder bed fusion (L-PBF) is an additive manufacturing technique for fabricating metal components with complex design and customized features. However, only a limited number of materials have been widely studied using L-PBF. AISI 420 stainless steel, an alloy with a useful combination of high strength, hardness, and corrosion resistance, is an example of one such material where few L-PBF investigations have emerged to date. In this dissertation, L-PBF experiments were conducted using 420 stainless steel powders to understand the effects of chemical composition, particle size distribution and processing parameters on ensuing physical, mechanical and corrosion properties and microstructure in comparison …

Microstructures And Hardness Of Tig Welded Experimental 57fe15cr25ni Steel, Parikin Parikin, Mohammad Dani, Abu Khalid Rivai, Agus Hadi Ismoyo, Riza Iskandar, Arbi Dimyati

Makara Journal of Technology

The microstructures and hardness of tungsten inert gas (TIG) welded experimental 57Fe15Cr25Ni steel were investigated through optical–scanning electron microscopy analyses and with a hardness tester, respectively. The welding process restructured the constituent atoms into regular and irregular crystal lattices. Rapid cooling of the weld metal allowed the formation of a dendritic (columnar) structure, with porous grains. By contrast, slow cooling influenced HAZ and led to the formation of grain structures. The crystal lattice became more organized and larger than other zones. Meanwhile, the base metal formed circular nets that covered large area inside thick and thin grain boundaries. The diffraction …

Evaluation Of Metallurgical And Mechanical Properties Of Alsi10mg Produced By Selective Laser Melting, Luke J. Suttey

Graduate Theses & Non-Theses

Selective laser melting (SLM) additive manufacturing (AM) of metal powders has long been a focus in the study of AM due to the possibility of weight reduction, complex shape formation, and production cost savings. Although applicable to a variety of metals SLM AM of the AlSi10Mg alloy was studied in an attempt to characterize the effect of processing parameter and build angle variation on the final microstructural, fractographic, and mechanical properties of parts produced without any thermal post-processing techniques. Research was conducted on five build angles (0°, 30°, 45°, 60°, and 90°), and three Global Energy Densities (GED) (37.15, 45.39, …

Process Development And Implementation For The Imaging Of Heat Treated A2 Steel For Consolidation Into An Atlas, Jessica Roberts

Senior Honors Projects, 2010-2019

Material processes, properties, and microstructure are interconnected, often visualized as the points of a triangle. Changing the process a material goes through will in turn change the properties and microstructure of that material. In materials research and education (specifically with metals), comparison between research or experiment results and scholarly-accepted results is important. When reading textbooks addressing different properties of metals and the process of metal treatment, images are often shown of the various microstructures associated with each property or process stage. The difficulty comes in trying to compare the stages or properties to one another; often different materials and processes …

Shape Memory Behavior Of Dense And Porous Niti Alloys Fabricated By Selective Laser Melting, Soheil Saedi

Theses and Dissertations--Mechanical and Aerospace Engineering

Selective Laser Melting (SLM) of Additive Manufacturing is an attractive fabrication method that employs CAD data to selectively melt the metal powder layer by layer via a laser beam and produce a 3D part. This method not only opens a new window in overcoming traditional NiTi fabrication problems but also for producing porous or complex shaped structures. The combination of SLM fabrication advantages with the unique properties of NiTi alloys, such as shape memory effect, superelasticity, high ductility, work output, corrosion, biocompatibility, etc. makes SLM NiTi alloys extremely promising for numerous applications.

The SLM process parameters such as laser power, …

Microstructural Evolution And Mechanical Properties Of Zn-Ti Alloys For Biodegradable Stent Applications, Zhiyong Yin

Dissertations, Master's Theses and Master's Reports

Stents made of biodegradable metallic materials are increasingly gaining interest within the biomaterials field because of their superior mechanical properties and biodegradation rates as compared to polymeric materials. Zinc and its alloys have been developed and investigated as possible candidates for biodegradable stent applications in the last five years. This study intended to formulate and characterize a new series of Zn-Ti alloys, with titanium additions of less than 1-3 wt%, with the primary objective to develop and select an alloy that meets benchmark values of mechanical properties for biodegradable stents. A series of Zn-Ti alloys was formulated through vacuum induction …

Microstructures And Properties Of Sintered Cu–Mos2/Cu Functional Gradient Materials, Aiqin Wang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study On The Impact Abrasive Wear Of New Super-High Manganese Steel, Wenyan Wang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Effect Of Er On Microstructure And Electrochemical Performance Of Al–Zn–In Anode, Zhengbing Xu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Void Closure And The Sensitivity Analysis Of The Process Parameters During Forging Of Large Steel Ingot, Bo Jiang, Yazheng Liu, Jianlin Sun, Guanglei Liu, Zhilin Wang, Zhigang Zhao

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Weld Thermal Simulation Of Crmov With Pwht In Type Iv Region, Bin Xu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Effect Of Preliminary Heat Treatment On Change In Microstructure Of Brass Cuzn36 During Pressing In Equal Channel Step Matrix, Irina Volokitina, Georgy Kurapov

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Slm Processing-Microstructure-Mechanical Property Correlation In An Aluminum Alloy Produced By Additive Manufacturing, Bryce Abstetar

Graduate Theses & Non-Theses

Additive manufacturing has become a highly researched topic in recent years all over the world. The current research evaluates the merits of additive manufacturing based on the mechanical, microstructural, and fracture properties of additive manufactured AlSi10Mg test specimens. The additive manufactured build plates consisted of tensile and fatigue test specimens. They were printed in the 0°, 30°, 60°, and 90° orientations relative to the build platform. Tensile and dynamic fatigue tests were conducted followed by microstructural characterization and fracture analysis. A wrought 6061 T6 aluminum alloy was also tested for comparison. Tensile tests revealed similar ultimate tensile strengths for all …

Coercivity Enhancement And Gamma Phase Avoidance Of Alnico Alloys, Li Zhang

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The promotion of social progress requires greater levels of energy efficiency, quality and productivity. However, these developments usually come at the cost of the environment. Green technologies such as electric vehicles, wind turbine and solar panels are ironically overshadowed by supply limitations and high prices of rare earth elements. Therefore, it is important to find alternative materials to replace those that contain critical elements. Alnico alloys show high magnetization, high Curie temperature (800°C) and good corrosion resistance, making it one of the best candidates to replace neodymium-based magnets used in electric vehicles.

In this thesis, methods controlling shape anisotropy and …

Cryogenic Processing Of Al 7050-T7451 Alloy For Improved Surface Integrity, Bo Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Al 7050-T7451 alloy with good combinations of strength, stress corrosion cracking resistance and toughness, is used broadly in the aerospace/aviation industry for fatigue-critical airframe structural components. However, it is also considered as a highly anisotropic alloy as the crack growth behavior along the short transverse direction is very different from the one in the long transverse direction, due to the inhomogeneous microstructure with the elongated grains distributed in the work material used in the sheet/plate applications. Further processes on these materials are needed to improve its mechanical and material properties and broaden its applications.

The material with ultra-fine or nano …

Processing Of Al-12si-Tnm Composites By Selective Laser Melting And Evaluation Of Compressive And Wear Properties, Konda Prashanth, Sergio Scudino, Anil Chaubey, Lukas Löber, Pei Wang, Hooyar Attar, Frank Schimansky, Florian Pyczak, Jürgen Eckert

Research outputs 2014 to 2021

Al-12Si (80 vol%)-Ti52.4Al42.2Nb4.4Mo0.9B0.06 (at.%) (TNM) composites were successfully produced by the selective laser melting (SLM). Detailed structural and microstructural analysis shows the formation of the Al6MoTi intermetallic phase due to the reaction of the TNM reinforcement with the Al-12Si matrix during SLM. Compression tests reveal that the composites exhibit significantly improved properties (∼140 and ∼160 MPa higher yield and ultimate compressive strengths, respectively) compared with the Al-12Si matrix. However, the samples break at ∼6% total strain under compression, thus showing a reduced plasticity of the composites. Sliding wear tests were carried out for both the Al-12Si matrix and the Al-12Si-TNM …

Thermal Processing And Mechanical Properties Of Beta Phase Titanium Alloys For Biomedical Applications, Ethan Wood

Graduate Theses & Non-Theses

The past few decades have seen an increase in the use of beta titanium alloys as structural biomaterials. Their combination of excellent mechanical properties, corrosion resistance and biocompatibility, along with a lower Young’s modulus than stainless steel, cobalt-chromium and commercially pure titanium make the beta titanium alloys ideal biomaterials. This work evaluates the use of three beta titanium alloys for biomedical applications. Three beta titanium alloys, Ti 15-3-3-3, Ti SP-700 and Ti Beta-C, underwent thermal processing to optimize mechanical properties. The alloys were subjected to tensile testing, hardness testing, fatigue testing, optical microscopy and SEM fracture analysis in order to …