Electrical and Electronics Commons^™

Developing A Bioengineered Nanoparticle For Improving Oral Absorption Of Iron Supplements., Mila Biswas

Open Access Theses & Dissertations

Iron deficiency (ID) and iron deficiency anemia (IDA) are widespread nutritional issues, affecting millions globally. Conventional iron supplements often suffer from low absorption rates and gastrointestinal side effects. We investigated β-glucan derivatives as potential carriers to enhance iron absorption and mitigate these drawbacks. This study explored a novel β-glucan-based carrier system loaded with ferrous sulfate heptahydrate. In-vitro studies demonstrated sustained iron stability for over six hours in simulated gastric fluids due to the carrier's affinity for stomach mucin. Particle size analysis and scanning electron microscopy (SEM) images confirmed this specific binding. Additionally, drug release studies revealed a pH-dependent release profile, …

Hardware Applications Of High-Speed Fault Detection Algorithms, Daniel Zintsmaster

All Theses

The growing need for a sustainable electric energy infrastructure has driven research into control, protection, and optimization of power systems. A key challenge is that the changing grid must operate at increasingly higher speeds, but many current hardware devices cannot meet these demands. This thesis focuses on power system protection, aiming to design a hardware solution that can detect and isolate faults in microseconds, ensuring faster, more reliable grid operations. The first hardware developed was for a low-voltage direct current (LVdc) microgrid, which faces challenges due to a lack of protection schemes and novel speed requirements. This thesis presents protection …

Leveraging P4 Programmable-Hardware Switches For In-Network Pmu Packet Recovery, Evan Michael Bonar

Electrical Engineering and Computer Science Undergraduate Honors Theses

Phasor Measurement Unit (PMU) systems are essential for real-time power grid monitor- ing but often face data loss due to network delays, equipment malfunctions, or transmis- sion errors. Traditional centralized recovery solutions introduce significant latency and scalability challenges. This thesis presents a P4-based in-network recovery mechanism that embeds detection and recovery directly into the data plane of P4-enabled programmable switches, significantly reducing recovery time and infrastructure complexity. Using the Aurora 610 switch, the system detects missing packets via sequence number analysis and recovers magnitudes with an efficient register-based algorithm.

Evaluation demonstrates high accuracy and low latency, achieving a mean absolute …

Three-Dimensional Environmentally Sustainable Neuromorphic Computing System Based On Natural Organic Memristor, Mohammed Rafeeq Khan

Graduate Theses and Dissertations (2019 - present)

A three-dimensional neuromorphic (3D) computing architecture based on environmentally sustainable natural organic honey memristors is proposed in this thesis. A set of comprehensive and experimental results indicate that the proposed systems exhibit remarkable inference accuracy, consistently surpassing the 90% threshold, even with different challenges such as device variations and nonlinearity. This study also considers four different conductance drift situations, the effects of analog-to-digital converter (ADC) quantization, and multiple algorithms, such as VGG8 and DenseNet-40. The deliverable of this thesis will test the stability of the proposed systems and explore their potential applications and scalability in real-world situations.

Uncovering The Light Network Load Performance Penalty Of The Network Link Outlier Factor (Nlof), Michelle Lara

Open Access Theses & Dissertations

This thesis evaluates the effectiveness of the Network Link Outlier Factor with Most Likely Link (NLOF: MLL) algorithm under varying network load conditions. Repeated simulation experiments using Mininet were conducted for four different network-wide load levels: 100 Mbps, 500 Mbps, 1 Gbps, and 5 Gbps. Using statistical inference, our experimental results indicate that NLOF: MLL is ineffective under light load conditions (i.e., 100Mbps load) due to the limited network flow data available for its learning process. This limitation highlights a key challenge in applying the algorithm to lightly loaded networks. A preliminary algorithm was proposed to address this light-load performance …

Dynamic Optimization Of Directed Energy Deposition Build Conditions Using Real-Time Monitoring Via Closed-Loop Control, Callan Herberger

Open Access Theses & Dissertations

Directed Energy Deposition (DED) is an additive manufacturing process that is being rapidly adopted by industry and is well suited for the fabrication of complex components in various metal alloys. DED provides unique benefits such as design flexibility, the potential for in-situ alloying, and an open environment that allows for unobstructed monitoring within the build chamber. Despite these benefits, fully exploiting additive manufacturing's (AM) potential remains a complex task for designers. This dissertation presents a framework for controlling Directed Energy Deposition process variables through in-situ monitoring. An exploration into modifying AM build conditions through the development and implementation of a …

Chipless 3d Microfluidic Rf Sensing, Sheikh Dobir Hossain

Open Access Theses & Dissertations

Effective management of the cold chain is essential to uphold the quality and safety of products vulnerability to physical factors like temperature, humidity, pressure, etc., including perishable foods, pharmaceuticals, and vaccines. Chipless Radio Frequency Identification (RFID) sensors have become increasingly favored as a viable technology for tracking, inventory, and sensing industries due to their wireless and non-line of sight (NLOS) situations, straightforward fabrication, cost efficiency, and adaptability to challenging environmental conditions. However, there is still a need for advancements in RFID sensors to make them promise for cold chain applications. Integration of flexibility and non-volatile memory into the existing RFID …

Extracting Permittivity And Permeability Using The Position-Insensitive And Calibration-Independent Method On A Rectangular Waveguide, James Conrad Denemark

Theses and Dissertations

Classic methods for extracting material characteristics require known measurements to accurately calibrate the network analyzer. Previous work demonstrated a position-insensitive and calibration-independent (PiCi) transmission/reflection method to extract a material’s permittivity. This thesis proposes a method with the same function, manipulated to use one empty measurement and then two samples of different thicknesses. The PiCi method is first adopted for rectangular waveguide which resulted in inaccurate permittivity data when compared to the calibrated solution. Once detector mismatch corrections were applied, the PiCi method produced accurate results. Using a 2-D numerical root search, permittivity and permeability material characteristics are now successfully extracted …

Smartphone Haptics Can Uncover Differences In Touch Interactions Between Asd And Neurotypicals, Ivonne Monarca, Franceli L. Cibrian, Isabel López Hurtado, Monica Tentori

Engineering Faculty Articles and Research

Utilizing touch interactions from smartphones for gathering data and identifying digital markers for screening and monitoring neurological disorders, such as Autism Spectrum Disorder (ASD), is an emerging area of research. Smartphones provide multiple benefits for this kind of study, including unobtrusive data collection via built-in sensors, integrated haptic feedback systems, and the capability to create specialized applications. Acknowledging the significant yet understudied presence of tactile processing differences in individuals with ASD, we designed and developed Feel and Touch, a mobile game that leverages the haptic capabilities of smartphones. This game provides vibrotactile feedback in response to touch interactions and collects …

Automated Solutions For Hydroponic Plant Growth, Sydney Mcclure, Adam Lachguar

Sustainability Conference

Within the past year, Project H.O.M.E. has been focusing on the design and development of a semi-automatic hydroponic system specifically for sustaining plant life in Martian-like conditions. Given the significance of extended space-based travel, where the duration of human life in space is a crucial factor, growing food becomes imperative. This project has integrated electrical engineering and computer science, with features like automated pH testing and sensor-based evaluations. Key functionalities, including timed watering and automatic adjustments, were coded to enhance plant care. Initially, the project’s comprehensive research and strategic planning resulted in detailed blueprints and computer-aided design models for the …

Sustainable Mobility: Machine Learning-Driven Deployment Of Ev Charging Points In Dublin, Ruairí De Fréin, Alexander Mutiso Mutua Mr

Articles

Electric vehicle (EV) drivers in urban areas face range anxiety due to the fear of running out of charge without timely access to charging points (CPs). The lack of sufficient numbers of CPs has hindered EV adoption and negatively impacted the progress of sustainable mobility. We propose a CP distribution algorithm that is machine learning-based and leverages population density, points of interest (POIs), and the most used roads as input parameters to determine the best locations for deploying CPs. The objects of the following research are as follows: (1) to allocate weights to the three parameters in a $6$ km …

Investigation On The Impact Of Loading Effect Of Fruit Juices On The Performance Of Pulsed Electric Field Generators, Devi S

Theses and Dissertations

Pulsed Electric Field (PEF) treatment is one of the efficient non-thermal food processing techniques which is being preferred as a replacement for thermal pasteurization methods. The effectiveness of PEF treatment was measured in terms of reduction in the microbial load in the food, extension of shelf life of the food and retention of nutritional properties of the food. The successful implementation of the PEF treatment depends upon various aspects such as design of pulse generator, parameters of pulse generator, shape and size of the treatment chamber and most importantly the characteristics of each food items. Design and fabrication of a …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Design And Analysis Of Optimal Energy Efficient Routing Protocols For Lifetime Maximization And Qos Enhancement In Wireless Body Area Networks, Karthikeyan S

Theses and Dissertations

In recent times, Wireless Body Area Networks (WBAN) a subsection of Wireless Sensor Networks (WSN) a promising technology for the future healthcare realm with cutting-edge technologies that can assist healthcare professionals like doctors, nurses and biomedical engineers which enables one-to-one care by implementing Tele-Medicine and Tele-Health solutions. Machine Learning (ML) and Internet of Things (IoT) enabled medical big data is the future of the healthcare sector and Medical Technology-based industries leading to applications in other sectors such as fitness tracking for commercial purposes, Sportsperson health monitoring to track their day-to-day activities and wearable devices for critical and emergency care.

Recent …

Possibility Of Applying Methods Of Analysis And Synthesis Of Linear Electrical Circuits To Some Nonlinear Circuits, Qudrat Gayratovich Abidov, Anvar Ismatullaevich Rahmatullaev, Mexrnoz Odiljonovna Gafurova

Technical science and innovation

This article discusses the possibility of applying the analysis and calculation methods used in linear electric circuits to certain nonlinear circuits. It is shown that if we abandon the quantitative criteria for the analysis and synthesis of nonlinear circuits using linear principles, some problems in nonlinear electrical engineering can be correctly solved based on linear theory. As an example, the simplest ferroresonant voltage stabilizer is considered, using the method of superposition and the equivalence of ferroresonant circuits in series and parallel connections. The electrical diagram is shown, and a formula for the stabilization coefficient is derived, representing a complex nonlinear …

Measurement Automation & Measurement System Research Endowment, Brian Bivinetto, Beneda Loya, Shiron Bendrihem

College of Engineering Summer Undergraduate Research Program

Road travel safety is always the most important issue in transportation systems. In general, several factors cause road accidents, such as human error, vehicle mechanical failure, roadway limitations (e.g. pavement, lane geometry, etc.), and inclement weather conditions. The major focus of today’s transportation developments is related to making highway transportation safer, smarter, and greener to enhance livability. Many accidents are caused when drivers lack a better understanding of the surrounding traffic conditions because the driver not only needs to control his/her vehicle but also needs to be aware of the movements of the vehicles around him/her. A driver cannot be …

Sal-E: Responsive Space Pathfinder Mission, Liam Duckworth, Berfredd Quezon

College of Engineering Summer Undergraduate Research Program

The main objective of the SAL-E mission is to grow the Cal Poly CubeSat Lab’s (PolySat) capabilities in rapid spacecraft design, as well as to provide the current generation of students with the opportunity to design, test, integrate, and communicate with a satellite. This summer we will be focusing on a few aspects of the spacecraft design and preparing our test facilities for Fall. Specifically, we will be ordering electronics boards that were designed in Spring, testing the boards as they arrive, developing software to interface with the payloads, begin integrated testing, updating the control system in our thermal vacuum …

Machine Learning-Based Stress Detection Using Smartphones And Wearable Sensors, Robert Burns, Kassandra Martinez-Mejia

College of Engineering Summer Undergraduate Research Program

Stress and mental health have been considered increasing global concerns in modern society, including some of the illnesses responsible for a large proportion of comorbidities and deaths worldwide, such as depression and cardiovascular disease. Recently, smartphones, smartwatches, and smart wristbands have become an integral part of our lives and have reached widespread usage [1]. This raised the question of whether we can detect and prevent stress with smartphones and wearable sensors wirelessly. The challenge of such an approach is that the weak ECG signal is prone to errors, and the battery life of the smart devices is limited. In this …

Gratings In Optical Waveguides And Lasers, Weida Zhang

Electrical Engineering Theses and Dissertations

Gratings play a crucial role in Distributed Bragg reflector (DBR) lasers, influencing their performance and characteristics. The focus of this work is aimed at the design of DBR lasers that significantly impact the laser's spectral and temporal behavior, making it a key component in optimizing DBR laser functionality.

The SMU developed grating software, compared with commercially available photonics software, has improved accuracy and much smaller computation times. The improved accuracy and reduced computation times compared with commercial photonics software occur because commercial software is typically based on numerical methods such as finite-difference time-domain (FDTD), eigenmode expansion and beam propagation methods …

Production Box Cost Estimating Relationships For Dod Avionics, Carla J. Cisneros, Edward D. White, Brandon M. Lucas, Jonathan D. Ritschel, Robert D. Fass, Shawn M. Valentine

Faculty Publications

The authors use historical information obtained from the Cost Assessment Data Enterprise to estimate recurring production unit cost for DoD avionics via cost estimating relationships (CERs). The specific modeled responses include mean unit cost, median unit cost, and the 100th production unit cost (T100) utilizing learning curve theory. For T100, the authors adopt both a multiplicative and an additive error for CER comparison. Recommended CERs consist of the mean unit cost and the T100 utilizing a multiplicative error. Moreover, results reveal that weight has a significant effect on cost as well as a potential underaccounting of real price change or …

Dual Base Sige Is-Hbt For Use In Biosensing Applications, Liam Stephen Hayes

Master's Theses

The proposed research is for a novel SiGe-based Ion-Sensitive Dual Hetero-junction Bipolar Transistor (IS-HBT) to be used in both trans-dermal biological sensing as well as Lab-on-Chip (LOC) applications. The end goals for the device designed are two: For one, the research done for this work will be used to substantiate the claims made by Zafar et al. [1] that an HBT-style structure is better suited for biosensing application rather than a conventional Field Effect Transistor (FET) based geometries. Secondly, it provides the final element to be integrated along with a selectivity membrane, as well as with a reverse-iontophoresis system to …

Design And Implementation Of An Inverted Short Baseline Acoustic Positioning System, Jakob Frabosilio

Master's Theses

This document details the design, implementation, testing, and analysis of an inverted short baseline acoustic positioning system. The system presented here is an above-water, air-based prototype for an underwater acoustic positioning system; it is designed to determine the position of remotely-operated underwater vehicles (ROVs) and autonomous underwater vehicles (AUVs) in the global frame using a method that does not drift over time.

A ground-truth positioning system is constructed using a stacked hexapod platform actuator, which mimics the motion of an AUV and provides the true position of an ultrasonic microphone array. An ultrasonic transmitter sends a pulse of sound towards …

Gamifying Energy Management: Leveraging Lokalytica Smartmeter For Sustainable Future, Emilio Roman Perez, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The gamification of software applications has emerged as an effective strategy to enhance user engagement and promote desired behaviors. This paper explores the gamification of the Lokalytica SmartMeter application, an energy management platform that leverages data from meter readings through its users. By incorporating a challenge-based system and a points-based leaderboard, Lokalytica rewards users who reduce their energy consumption. The gamification application of Lokalytica was built using NextJS, a full-stack framework, along with Tailwind CSS and DaisyUI for UI design, MongoDB Atlas for the database, and GitHub for version control, collaboration, and tracking. This paper discusses the development process, the …

Two-Dimensional Quantum Material Identification Via Self-Attention And Soft-Labeling In Deep Learning, Xuan Bac Nguyen, Apoorva Bisht, Benjamin Thompson, Hugh O.H. Churchill, Khoa Luu, Samee U. Khan

Electrical Engineering and Computer Science Faculty Publications and Presentations

Detecting two-dimensional (2D) materials in silicon chips presents a significant challenge in the field of quantum machines due to the difficulty of data collection. Specifically, among thousands of flakes, not all flakes are useful or well-annotated, resulting in noisy and hard samples within the dataset, which challenges the deep neural network (DNN) to learn. To address this problem, we propose a novel method for identifying quantum 2D flakes even when there is a high rate of missing annotations in the input images. In particular, we first propose a new mechanism for automatically detecting false negative flakes that are missing annotations. …

Electromagnetic Theory And Applications, 2nd Edition, Nicholas Madamopoulos, George Kliros

Open Educational Resources

This book intends to provide both the fundamentals of Electromagnetics but also some practical applications of the concepts covered. Having taught electromagnetics for several years, the authors feel that many times the field of electromagnetics comes as “old” and often times students do not appreciate the concepts and their importance in everyday applications. The authors intend to accompany the EM concepts with life applications. Hence, students may see the direct impact of the knowledge they acquire through the study of the field of electromagnetics and better appreciate the field.

Performance Evaluation And Integration Of Distortion Mitigation Methods For Fisheye Video Object Detection, John Benedict Du, Gian Paolo Mayuga, Maria Leonora Guico

Electronics, Computer, and Communications Engineering Faculty Publications

The distortion observed in fisheye cameras has proven to be a persistent challenge for numerous state-of-the-art object detection algorithms, instigating the development of various techniques aimed at mitigating this issue. This study aims to evaluate various methods for mitigating distortion in fisheye camera footage and their impact on video object detection accuracy and speed. Using Python, OpenCV, and third-party libraries, the researchers modified and optimized said methods for video input and created a framework for running and testing different distortion correction methods and object detection algorithm configurations. Through experimentation with different datasets, the study found that undistorting the image using …

Investigations On Structure-Related Properties Of Organic Inorganic Hybrid Materials For Multifunction, Anu Ranjani E Ms

Theses and Dissertations

Two-dimensional (2D) hybrid halide perovskites have become a versatile material in diverse applications like optoelectronics, lighting and display, magnetism, etc. These materials are often termed as layered hybrid halide perovskites (LHHPs) due to their unique structure with alternate organic and inorganic layers. The presence of insulating organic layers separates the inorganic perovskite slabs, creating a quantum-confined architectural configuration. This unique configuration endows these materials with a spectrum of distinctive functionalities, encompassing photovoltaics, lighting and displays, second harmonic generation, optical limiting, ferroelectricity, and ferromagnetism. The exceptional attribute is that a single LHHP can respond autonomously to external stimuli, such as changes …

Degradation Study Of Single Crystal Barium Titanate Capacitors Under Harsh Environment, Menglin Wang

Electrical Engineering Theses and Dissertations

Capacitors are critical for voltage source converter functionality. DC-link capacitors are known to have reliability issues. Resistance degradation at high temperatures is one of the primary failure modes in capacitors. The overall goal of this program is to improve the understanding of high voltage breakdown and resistance degradation in high dielectric constant inorganic ceramic capacitors, using single crystal BaTiO₃ as a model system to understand the impact and control of oxygen vacancy migration to maximize the long-term reliability of high voltage inorganic multi-layer ceramic capacitors, which allows higher frequency operation, reducing the size and cost of passive components in …

Development Of A Nephelometer For Characterization Of Calcium Oxalate Crystal Concentrations Within Solution, Conrad Small

Electrical Engineering Theses and Dissertations

The prevalence of kidney stones has been steadily increasing over the last 30 years, affecting both men and women across all age groups. This rise is largely attributed to lifestyle changes associated with technological advancements, such as more sedentary lifestyles, dietary shifts towards more processed foods, and an increased incidence of metabolic diseases like diabetes. Despite the growing prevalence of kidney stones, the methods for early detection have remained relatively unchanged. Current testing involves collecting urine samples over a 24-hour period and sending them to a lab for microscopic and dipstick analysis. This process provides a comprehensive overview of urine …

Design Of A Portable Fast Scan Cyclic Voltammetry Device Utilizing Pulse Width Modulation For Waveform Generation, Nora Szymkowski

Masters Theses

Fast Scan Cyclic Voltammetry (FSCV) is a widely used electrochemical technique for real-time measurement of the brain’s chemical messengers, including the molecule dopamine, with high temporal resolution. Currently the financial burden of performing FSCV is quite high, ranging from $8,000 to $20,000+ making the barrier to entry nearly insurmountable for laboratories and classrooms at small institutions. The purpose of this project was to develop a Do-It-Yourself (DIY), portable, and cost-effective FSCV system for use in laboratory and classroom settings. The project aimed to create a compact and cost-effective system that could be used by researchers and educators to study dopamine …