Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Geological Engineering (230)
- Physical Sciences and Mathematics (181)
- Mining Engineering (120)
- Earth Sciences (111)
- Geology (106)
-
- Biochemical and Biomolecular Engineering (82)
- Mechanical Engineering (69)
- Electrical and Computer Engineering (55)
- Chemistry (46)
- Nuclear Engineering (42)
- Materials Science and Engineering (41)
- Civil and Environmental Engineering (34)
- Geophysics and Seismology (28)
- Social and Behavioral Sciences (25)
- Environmental Sciences (20)
- Thermodynamics (20)
- Complex Fluids (19)
- Materials Chemistry (19)
- Other Chemical Engineering (18)
- Oil, Gas, and Energy (17)
- Public Affairs, Public Policy and Public Administration (16)
- Energy Policy (14)
- Polymer and Organic Materials (14)
- Economics (13)
- Other Materials Science and Engineering (12)
- Environmental Policy (11)
- Transport Phenomena (11)
- Institution
-
- Missouri University of Science and Technology (612)
- Louisiana State University (181)
- Chulalongkorn University (88)
- United Arab Emirates University (54)
- West Virginia University (27)
-
- Edith Cowan University (21)
- The British University in Egypt (18)
- University of North Dakota (17)
- Montana Tech Library (16)
- University of Dayton (11)
- City University of New York (CUNY) (9)
- University of Texas at El Paso (9)
- Michigan Technological University (8)
- University of Arkansas, Fayetteville (8)
- Central Bank of Nigeria (7)
- Association of Arab Universities (5)
- Purdue University (5)
- Tashkent State Technical University (5)
- University of Malaya (5)
- American University in Cairo (4)
- New Jersey Institute of Technology (4)
- University of Louisiana at Lafayette (4)
- University of Nebraska - Lincoln (4)
- Georgia Southern University (3)
- Louisiana Tech University (3)
- Raynor Library Marquette University (3)
- The University of Akron (3)
- Universitas Indonesia (3)
- University of Kentucky (3)
- Virginia Commonwealth University (3)
- Keyword
-
- Enhanced oil recovery (30)
- Wettability (20)
- Drilling (19)
- Conformance control (17)
- EOR (17)
-
- Machine learning (14)
- Enhanced Oil Recovery (13)
- Machine Learning (13)
- Rheology (11)
- Hydraulic Fracturing (10)
- Interfacial tension (10)
- Permeability (10)
- Reservoir Simulation (10)
- Surfactant (10)
- Well control (10)
- Artificial Intelligence (9)
- Conformance Control (9)
- Foam (9)
- Hydraulic fracturing (9)
- Shale (9)
- Geomechanics (8)
- Preformed particle gel (8)
- Lost circulation (7)
- Polymer (7)
- Reservoir (7)
- Wettability alteration (7)
- Adsorption (6)
- CO2 (6)
- Carbonate reservoirs (6)
- Crude oil (6)
- Publication Year
- Publication
-
- Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works (250)
- Masters Theses (153)
- LSU Master's Theses (96)
- Doctoral Dissertations (93)
- Chulalongkorn University Theses and Dissertations (Chula ETD) (88)
-
- LSU Doctoral Dissertations (77)
- UMR-MEC Conference on Energy / UMR-DNR Conference on Energy (59)
- Theses (36)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (26)
- UMR Journal -- V. H. McNutt Colloquium Series (20)
- Petroleum Engineering and Gas (14)
- Graduate Theses & Non-Theses (13)
- Research outputs 2014 to 2021 (13)
- Chemical and Materials Engineering Faculty Publications (11)
- Thesis/ Dissertation Defenses (11)
- Theses and Dissertations (10)
- Open Access Theses & Dissertations (9)
- Dissertations (8)
- Dissertations and Theses (8)
- Honors Capstones (8)
- Bullion (7)
- Graduate Theses and Dissertations (7)
- Research outputs 2022 to 2026 (7)
- Chemistry Faculty Research & Creative Works (6)
- Civil, Architectural and Environmental Engineering Faculty Research & Creative Works (6)
- Patents (6)
- Petroleum Engineering Posters and Presentations (6)
- Petroleum Engineering Student Publications (6)
- Dissertations, Master's Theses and Master's Reports (5)
- Student Works (2020-2029) (5)
- Publication Type
Articles 661 - 690 of 1173
Full-Text Articles in Petroleum Engineering
Material Flow Analysis (Mfa) Study For Sustainable Management Of Pvc Wastes In Thailand (Phase Iii), Wikanda Khomchu
Material Flow Analysis (Mfa) Study For Sustainable Management Of Pvc Wastes In Thailand (Phase Iii), Wikanda Khomchu
Chulalongkorn University Theses and Dissertations (Chula ETD)
Polyvinyl chloride (PVC) products are used for domestic consumption more than 400,000 tons annually and tend to be increasing in Thailand. After discarded, these products will become wastes which are being accumulated and could cause several environmental problems if they are disposed by inappropriate method. In previous studies, our group investigated the material flow of PVC in Thailand to handle the PVC waste problems. Material Flow Analysis (MFA) model was developed to estimate the quantity and route of PVC wastes in Thailand. Furthermore, the primary data were collected from recycle shops and landfill sites were used to estimate the amount …
การขจัดกำมะถันแบบดูดซับจากน้ำมันดีเซลบนวายซีโอไลต์แลกเปลี่ยนไอออน, อานันท์ ศิลาจันทร์
การขจัดกำมะถันแบบดูดซับจากน้ำมันดีเซลบนวายซีโอไลต์แลกเปลี่ยนไอออน, อานันท์ ศิลาจันทร์
Chulalongkorn University Theses and Dissertations (Chula ETD)
ปัจจุบัน 95 เปอร์เซ็นต์ ของการขนส่งขึ้นกับเชื้อเพลิงซอสซิลโดยเฉพาะอย่างยิ่งน้ำมันดีเซล น้ำมันดีเซลไม่ได้มีส่วนประกอบแค่พาราฟินและโอเลฟินเพียงเท่านั้น ยังมีสารประกอบกำมะถันซึ่งเป็นสาเหตุหนึ่งที่ก่อให้เกิดภาวะฝนกรด การกัดกร่อนอุปกรณ์ที่เกี่ยวข้อง ความเป็นพิษต่อตัวเร่งปฏิกิริยาและก่อให้เกิดปัญหาต่อระบบทางเดินหายใจ เพื่อแก้ไขปัญหาดังกล่าวกระบวนการขจัดกำมะถันโดยการดูดซับถูกนำมาใช้กับน้ำมันดีเซลเพื่อลดปริมาณของกำมะถันในน้ำมันดีเซล อย่างไรก็ตามน้ำมันดีเซลยังคงมีส่วนประกอบอื่นๆ เช่น สารประกอบแอโรแมติกและไนโตรเจนอยู่ด้วย ดังนั้น งานวิจัยนี้เป็นการศึกษาผลของสารประกอบแอโรแมติกและไนโตรเจนต่อการขจัดกำมะถันในรูปของไดเบนโซไทโอฟีนและ 4,6-ไดเมทิลไดเบนโซไทโอฟีน ในน้ำมันจำลองที่มีนอร์มัลออกเทนเป็นตัวทำละลายโดยการดูดซับโดยใช้คอลัมน์แบบเบดนิ่งที่บรรจุตัวดูดซับ ตัวดูดซับที่ใช้ในการศึกษามี 6 ชนิด ได้แก่ ซีโอไลต์ Na-Y, Ni-Y, La-Y, Ce-Y, Ni-La-Y และ Ni-Ce-Y ผลการทดลองแสดงในรูปของความจุเบรคทรูและความจุทั้งหมดในการดูดซับสารประกอบกำมะถันซึ่งสามารถคำนวณได้จากเส้นโค้งเบรคทรู พบว่าความจุในการดูดซับไดเบนโซไทโอฟีนและ 4,6-ไดเมทิลไดเบนโซไทโอฟีนในน้ำมันจำลองที่มีสารประกอบแอโรแมติกและไนโตรเจนโดยใช้ตัวดูดซับชนิดต่างๆ ลดลงตามลำดับดังนี้ Na-Y ~ Ni-Ce-Y ~ Ni-Y > La-Y > Ce-Y > Ni-La-Y สารประกอบแอโรแมติกและไนโตรเจนส่งผลให้ความจุการดูดซับสารประกอบกำมะถันลดลงโดยสารประกอบไนโตรเจนส่งผลต่อการลดลงของการดูดซับสารประกอบกำมะถันมากกว่าสารประกอบแอโรแมติก นอกจากนี้ศึกษาการคืนสภาพตัวดูดซับซีโอไลต์ Na-Y ด้วยการสกัดด้วยตัวทำละลายโดยตัวแปรที่ศึกษา ได้แก่ ชนิดตัวทำละลาย อุณหภูมิและอัตราการไหลของตัวทำละลาย พบว่า การคายสารประกอบที่ดูดซับบ่งบอกประสิทธิภาพของการคืนสภาพจะขึ้นกับสภาพขั้วที่เหมือนกันของตัวทำละลายและสารที่ถูกดูดซับ ตัวทำละลายที่มีอุณหภูมิสูงมักจะช่วยให้สกัดสารถูกดูดซับได้ดีขึ้น และการใช้อัตราการไหลต่ำช่วยให้ตัวทำละลายมีเวลามากในการสกัดสารถูกดูดซับ
การผลิตเชื้อเพลิงชีวภาพแบบต่อเนื่องจากน้ำมันปาล์มในไฮเดรตเอทานอลภาวะเหนือวิกฤต, วราลี จิยะพานิชกุล
การผลิตเชื้อเพลิงชีวภาพแบบต่อเนื่องจากน้ำมันปาล์มในไฮเดรตเอทานอลภาวะเหนือวิกฤต, วราลี จิยะพานิชกุล
Chulalongkorn University Theses and Dissertations (Chula ETD)
การผลิตเชื้อเพลิงจากน้ำมันปาล์มในเอทานอลภาวะเหนือวิกฤตเป็นการผลิตเชื้อเพลิงที่ได้มาจากแหล่งทรัพยากรที่นำกลับมาใช้ใหม่ได้ (Renewable resource) อย่างแท้จริง เนื่องจากเอทานอลสามารถผลิตได้จากชีวมวลผ่านกระบวนการหมัก อย่างไรก็ตามการใช้เอทานอลเกรดเชื้อเพลิง (99.5% w/w) มีราคาแพงและใช้พลังงานสูงในการเพิ่มความบริสุทธิ์ ดังนั้นเพื่อเป็นการลดต้นทุนและพลังงานในการผลิต ในงานวิจัยนี้จึงได้ทำการศึกษาการผลิตเชื้อเพลิงชีวภาพจากน้ำมันปาล์มในไฮเดรตเอทานอลภาวะเหนือวิกฤตในเครื่องปฏิกรณ์แบบต่อเนื่อง โดยทำการศึกษาผลของอัตราส่วนโดยโมลของเอทานอลต่อน้ำมันปาล์มช่วง 9:1–21:1 ร้อยละโดยน้ำหนักของน้ำในเอทานอลช่วง 4.40–20.0 และเวลาในการเกิดปฏิกิริยา ช่วง 2.0–28.0 นาที ที่มีผลต่อร้อยละมอนอกลีเซอไรด์และร้อยละเอทิลเอสเทอร์ จากการศึกษาโดยวิธีการพื้นผิวตอบสนอง (Response surface methodology) ที่อุณหภูมิคงที่ 400 องศาเซลเซียส ความดัน 15 เมกะพาสคัล พบว่าปัจจัยหลักที่มีผลอย่างมีนัยสำคัญต่อร้อยละมอนอกลีเซอไรด์มากที่สุด คือ อัตราส่วนโดยโมลของเอทานอลต่อน้ำมันปาล์มและร้อยละของน้ำในเอทานอล ส่วนปัจจัยหลักที่มีผลอย่างมีนัยสำคัญต่อร้อยละเอทิลเอสเทอร์มากที่สุดคือ อัตราส่วนโดยโมลของเอทานอลต่อน้ำมันปาล์มและเวลาในการเกิดปฏิกิริยา โดยภาวะที่เหมาะสมสำหรับการผลิตเชื้อเพลิงชีวภาพที่ ร้อยละเอสเทอร์สูงสุดและร้อยละมอนอกลีเซอไรด์ต่ำกว่า 0.80 คือที่อัตราส่วนโดยโมลเอทานอลต่อน้ำมันปาล์ม 21:1 ร้อยละของน้ำในเอทานอล 12.77 และเวลาในการเกิดปฏิกิริยา 9.10 นาที ได้ร้อยละมอนอกลีเซอไรด์เท่ากับ 0.80 และร้อยละผลได้เอสเทอร์สูงสุดเท่ากับ 53.32 การวิเคราะห์สมบัติของเชื้อเพลิงชีวภาพที่ได้จากภาวะที่เหมาะสมยังไม่เป็นไปตามมาตรฐานของไบโอดีเซล โดยพบว่ามีค่าความหนืดและค่าความเป็นกรดสูง เนื่องจากเกิดปฏิกิริยาไม่สมบูรณ์ส่งผลให้มีปริมาณกรดไขมันอิสระเหลืออยู่ในผลิตภัณฑ์เชื้อเพลิงชีวภาพประมาณร้อยละ 22.65
การออกแบบไซโคลนโดยจำลองกระบวนการและการพิมพ์สามมิติ, จิรวัฒน์ จึงเจริญสุขยิ่ง
การออกแบบไซโคลนโดยจำลองกระบวนการและการพิมพ์สามมิติ, จิรวัฒน์ จึงเจริญสุขยิ่ง
Chulalongkorn University Theses and Dissertations (Chula ETD)
การเผาไหม้เชื้อเพลิงซากดึกดำบรรพ์ และชีวมวล ภายใต้กระบวนการทางความร้อนในการผลิตไฟฟ้าของอุตสาหกรรมต่างๆ มักพบสารประกอบอนินทรีย์ในเถ้า ซึ่งเป็นมลพิษทางอากาศ ปะปนออกมากับแก๊สผลิตภัณฑ์หลังการเผาไหม้ นักวิจัยจึงพยายามจะหาวิธีแยกเถ้า หรือ อนุภาคของแข็ง เหล่านี้ออกจากแก๊สผลิตภัณฑ์ อุปกรณ์ที่ใช้กันอย่างแพร่หลายคือ ไซโคลน เนื่องจากไซโคลนสามารถสร้างได้ง่าย ค่าใช้จ่ายในการบำรุงรักษาต่ำ โดยใช้แรงเหวี่ยงหนีศูนย์กลางและแรงโน้มถ่วงในการแยกอนุภาคของแข็งออกจากแก๊ส ปัจจุบันมีการพัฒนาไซโคลนให้มีรูปร่างต่างๆ แต่ยังขาดงานวิจัยที่ศึกษาความสัมพันธ์ระหว่างรูปร่างไซโคลนกับประสิทธิภาพการแยกทั้งในเชิงคำนวณและเชิงทดลอง โดยงานวิจัยนี้จะแบ่งการศึกษาออกเป็น 3 ส่วน คือ การหาแบบการจำลองและภาวะที่เหมาะสมสำหรับการจำลองพลศาสตร์ของไหลเชิงคำนวณของไซโคลนในระบบสามมิติจากการทดลองของ Azadi และคณะ เพื่อนำมาศึกษาผลของความดันลด และประสิทธิภาพในการแยกของไซโคลนรูปร่างต่างๆ ที่ปรับเปลี่ยนจากไซโคลนสแตมาน และสร้างไซโคลนสแตมานต้นแบบด้วยเทคโนโลยีการพิมพ์สามมิติซึ่งมีความสามารถในการปรับแต่งรูปร่างสูง พร้อมทั้งเปรียบเทียบผลจากการทดลองไซโคลนต้นแบบกับผลจากการจำลองพลศาสตร์ของไหลเชิงคำนวณ ผลที่ได้พบว่า แบบจำลองที่เหมาะสมต่อการใช้ในการศึกษาพฤติกรรมการไหลของไซโคลนในระบบสามมิติ คือ RNG k-epsilon model ที่มีสัดส่วนโดยปริมาตรของของแข็งเท่ากับ 6×105 และมีความเร็วทางเข้าเท่ากับ 15 เมตรต่อวินาที โดยได้นำมาศึกษาผลของไซโคลนในรูปร่างต่างๆ ดังนี้ ไซโคลนสแตมาน ไซโคลนที่มุมของทางเข้าเพิ่ม 15 องศา ไซโคลนที่มุมของทางเข้าเพิ่ม 30 องศา ไซโคลนที่มุมของทางเข้าเพิ่ม 45 องศา ไซโคลนที่มุมของทางเข้าลดลง 15 องศา ไซโคลนที่มุมของทางเข้าลดลง 30 องศา ไซโคลนที่มุมของทางเข้าลดลง 45 องศา ไซโคลนที่เพิ่มขนาดเส้นผ่านศูนย์กลางทางออกแก๊ส 10% และ ไซโคลนที่ลดขนาดเส้นผ่านศูนย์กลางทางออกแก๊ส 10% ซึ่งมีไซโคลนเพียงรูปแบบเดียวที่ให้ผลของประสิทธิภาพในการแยกสูงกว่าไซโคลนสแตมาน คือ ไซโคลนที่ลดขนาดเส้นผ่านศูนย์กลางทางออกแก๊ส 10% โดยให้ประสิทธิภาพสูงกว่าประมาณ 1.4%
ผลของสารตัวเติมพอลิอะนิลีน-กรดโดเดซิลเบนซีนซัลโฟนิกต่อสมบัติของแผ่นนำไฟฟ้าคาร์บอนคอมพอสิต, กิตติพงษ์ เรือนคำ
ผลของสารตัวเติมพอลิอะนิลีน-กรดโดเดซิลเบนซีนซัลโฟนิกต่อสมบัติของแผ่นนำไฟฟ้าคาร์บอนคอมพอสิต, กิตติพงษ์ เรือนคำ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ศึกษาผลของสารตัวเติมพอลิอะนิลีน-กรดโดเดซิลเบนซีนซัลโฟนิก (DBSA-PANI) ต่อสมบัติของแผ่นนำไฟฟ้าคาร์บอนคอมพอสิต (แกรไฟต์/เรซินอิพ็อกซี) ส่วนแรกศึกษาสัดส่วนของแกรไฟต์ที่เหมาะสมและภาวะในการขึ้นรูป พบว่าปริมาณแกรไฟต์ที่เหมาะสมคือร้อยละ 85 โดยน้ำหนัก ให้ค่าการนำไฟฟ้าในแนวระนาบและแนวทะลุผ่านคือ 67 และ 27 ซีเมนต์ต่อเซนติเมตร ตามลำดับ ค่าความทนต่อแรงดัดโค้ง 32 เมกะพาสคัล ความหนาแน่น 1.98 กรัมต่อลูกบาศก์เซนติเมตร ค่าการดูดซึมน้ำร้อยละ 0.69 และความเป็นรูพรุนร้อยละ 1.37 สำหรับภาวะในการขึ้นรูปพบว่า เมื่อใช้ความดันกดอัดในช่วง 12 - 16 เมกะพาสคัล จะทำให้สมบัติเชิงกลด้อยลงและการดูดซึมน้ำเพิ่มมากขึ้น เมื่อใช้อุณหภูมิในช่วง 100 - 190 องศาเซลเซียส คอมพอสิตจะมีสมบัติเชิงกลดีขึ้นและค่าการดูดซึมน้ำลดลง ส่วนเวลาในการอัดขึ้นรูปคอมพอสิตในช่วง 5 - 60 นาที พบว่าการใช้ระยะเวลามากในการขึ้นรูปจะทำให้สมบัติเชิงกลและการดูดซึมน้ำของคอมพอสิตดีขึ้น การศึกษาในส่วนที่สองเป็นการศึกษาผลของ DBSA-PANI ที่เติมลงในคอมพอสิตของแกรไฟต์/เรซินอิพ็อกซี ที่มีแกรไฟต์ร้อยละ 85 โดยน้ำหนัก พบว่าปริมาณของ DBSA-PANI ที่เติมลงในคอมพอสิตของแกรไฟต์/เรซินอิพ็อกซีแล้วส่งผลให้คอมพอสิตมีสมบัติดีที่สุดคือร้อยละ 1 โดยน้ำหนัก ซึ่งให้ค่าการนำไฟฟ้าในแนวระนาบคือ 73 ซีเมนต์ต่อเซนติเมตร การนำไฟฟ้าในแนวทะลุผ่านคือ 33 ซีเมนต์ต่อเซนติเมตร ค่าความทนต่อแรงดัดโค้ง 27 เมกะพาสคัล ค่าการดูดซึมน้ำร้อยละ 0.97 ค่าความเป็นรูพรุนร้อยละ 1.8 และมีความหนาแน่น 1.87 กรัมต่อลูกบาศก์เซนติเมตร
การผลิตมอนอกลีเซอไรด์แบบไม่ใช้ตัวเร่งปฏิกิริยาจากกลีเซอรอลและน้ำมันปาล์ม, ฐิติวรดา ยิ่งยง
การผลิตมอนอกลีเซอไรด์แบบไม่ใช้ตัวเร่งปฏิกิริยาจากกลีเซอรอลและน้ำมันปาล์ม, ฐิติวรดา ยิ่งยง
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ศึกษาการผลิตมอนอกลีเซอไรด์จากน้ำมันปาล์มและกลีเซอรอลโดยไม่ใช้ตัวเร่งปฏิกิริยาใช้การออกแบบทดลองแบบ Central composite design จำนวน 48 การทดลองโดยใช้ร้อยละมอนอกลีเซอไรด์เป็นผลตอบสนองหลัก ตัวแปรที่ศึกษา ได้แก่ อุณหภูมิ (220, 240 และ 260 องศาเซลเซียส) ระยะเวลาทำปฏิกิริยา (30, 90 และ 150 นาที) และอัตราส่วนโดยโมลของไอโซโพรพานอลต่อกลีเซอรอลต่อน้ำมันปาล์ม (0, 15 และ 30) โดยศึกษาอัตราส่วนโดยโมลของกลีเซอรอลต่อน้ำมันปาล์มคงที่ เท่ากับ 5 ต่อ 1 และปริมาตรของสารใส่ในเครื่องปฏิกรณ์เท่ากับร้อยละ 60 จากการทดลองพบว่า ตัวแปรที่มีผลต่อร้อยละมอนอกลีเซอไรด์มากที่สุด ได้แก่ อุณหภูมิและเวลาการเกิดปฏิกิริยา นอกจากนี้พบว่า ร้อยละไดกลีเซอไรด์และร้อยละกรดไขมันไม่มีความสัมพันธ์กับภาวะในการทำปฏิกิริยา ที่ระดับความเชื่อมั่นร้อยละ 99 ไอโซโพรพานอลไม่มีผลอย่างมีนัยสำคัญต่อร้อยละมอนอกลีเซอไรด์ นอกจากนี้มีการศึกษาเปรียบเทียบการผลิตมอนอกลีเซอไรด์โดยใช้กลีเซอรอลบริสุทธิ์และกลีเซอรอลดิบเป็นสารตั้งต้น ร้อยละมอนอกลีเซอไรด์สูงสุดพบที่อุณหภูมิ 260 องศาเซลเซียส เวลาการเกิดปฏิกิริยา 150 นาที และอัตราส่วนโดยโมลของกลีเซอรอลต่อน้ำมันปาล์มเท่ากับ 5:1 ร้อยละมอนอกลีเซอไรด์ที่ผลิตได้จากกลีเซอรอลบริสุทธิ์และกลีเซอรอลดิบ 37.48 และ 46.58 ตามลำดับ เนื่องจากในกลีเซอรอลดิบมีการปนเปื้อนของน้ำร้อยละ 10 ซึ่งสามารถทำปฏิกิริยากับไตรกลีเซอไรด์ได้เร็วกว่าการสลายตัวทางความร้อนเพียงอย่างเดียวส่งผลให้การผลิตมอนอกลีเซอไรด์ด้วยกลีเซอรอลดิบได้ผลดีกว่ากลีเซอรอลบริสุทธิ์
Removal Of Carboxylic Acids And Water From Pyrolysis Oil, George Alexander Marshall
Removal Of Carboxylic Acids And Water From Pyrolysis Oil, George Alexander Marshall
Graduate Theses and Dissertations
Over 70% of the world’s energy consumption is provided by fossil fuels and with those reserves depleting at a fast rate, alternative energy sources or methods are needed to support the world’s energy needs. This research was done in an attempt to make it more economically feasible to produce fuel products, such as bio-diesel, from the upgrading of bio-oil obtained from the pyrolysis of biomass waste material such as sawdust. The high water and oxygenated compound content of bio-oil make it undesirable for fuel use; however, two methods involving surface modified commercial membranes were utilized in hopes of overcoming these …
Evaluation Of Smart Water Flooding In A Selected Uae Carbonate Oil Reservoir, Mohammad Jasem Khalifi
Evaluation Of Smart Water Flooding In A Selected Uae Carbonate Oil Reservoir, Mohammad Jasem Khalifi
Chemical and Petroleum Engineering Theses
Water flooding is by far the most common method of improved oil recovery applied in oil reservoirs. Water is the cheapest source of external energy that has been used over decades in water flooding schemes, provided that the damage does not adversely affect its injectivity. Displacement efficiency of water flooding can be significantly affected by crude oil/water/rock interactions. Historically, some consideration was given to such interactions in the practice of reservoir engineering. In recent years, extensive research in this area has documented that higher oil recoveries can be obtained when low-salinity water is injected in a formation with high salinity …
Plasticized Polymer Coatings For Sh-Saw Sensors For High Sensitivity And Long-Term Monitoring Of Btex Analytes In Liquid Phase, Pintu Adhikari
Plasticized Polymer Coatings For Sh-Saw Sensors For High Sensitivity And Long-Term Monitoring Of Btex Analytes In Liquid Phase, Pintu Adhikari
Master's Theses (2009 -)
BTEX compounds (benzene, toluene, ethylbenzene, and xylene) are constituents of crude oil and hazardous to human health. Among them, benzene has the lowest maximum contaminant level for drinking water because of its carcinogenicity. Spills or leakage from underground storage tanks or hazardous waste sites can contaminate nearby groundwater with these volatile organic compounds. Therefore, it is very important to detect the presence of BTEX contamination as early as possible in order to start the remediation process and maintain a healthy environment. To develop an in-situ continuous monitoring sensor system, shear horizontal surface acoustic wave (SH-SAW) sensor devices are being investigated …
Exploring The Effects Of Aromatic Molecules In Chemical Enhanced Oil Recovery, Jacob M. Crain, Cliff Johnston, Rituraj Borgohain
Exploring The Effects Of Aromatic Molecules In Chemical Enhanced Oil Recovery, Jacob M. Crain, Cliff Johnston, Rituraj Borgohain
The Summer Undergraduate Research Fellowship (SURF) Symposium
Chemical enhanced oil recovery (cEOR) methods are being used as a viable contributor to the world’s growing energy demands. Due to the complex chemical composition of crude oil, attempting to optimize the surfactant concentration and salinity of formulations is done empirically. This process can be very time intensive due to the wide variety of surfactant structures available for cEOR. Surfactant selection is typically done by matching the average chain length of the oil with that of the surfactant. In this study, we are trying to understand how aromatic structures present in Illinois Basin crude oil interact with surfactants. This will …
Initial Structural Subsidence As Reflected In Morrowan And Atokan (Pennsylvanian) Subsurface Stratigraphy, Northern Arkoma Basin, North-Central Arkansas, Fatimah Taher Nahi Al Asadi
Initial Structural Subsidence As Reflected In Morrowan And Atokan (Pennsylvanian) Subsurface Stratigraphy, Northern Arkoma Basin, North-Central Arkansas, Fatimah Taher Nahi Al Asadi
Graduate Theses and Dissertations
The Arkoma Basin is a carboniferous foreland basin that is known for its prolific gas production. The objective of this research is to study the initial subsidence of the basin by analyzing the strati-graphic and structural features of the study area. This was accomplished through IHS Petra, Surf-er 13, and Win-Tensor software. Field work studies comprised a large part of this study. Also, a seismic profile and Google earth elevation profiles are among the methods used to study the initial subsidence of the Arkoma Basin. The study area within the basin represents a transitional zone from the shelf into the …
Fugitive Emissions, University Of North Dakota. Energy And Environmental Research Center
Fugitive Emissions, University Of North Dakota. Energy And Environmental Research Center
EERC Brochures and Fact Sheets
Fact sheet about fugitive emissions, their causes, and U.S. Environmental Protection Agency methods of detection and regulation. [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]
The Exacerbating Effect Of Coastal Erosion To Orphan Well Risk Analysis In Terrebonne Parish, Taylor Reeves
The Exacerbating Effect Of Coastal Erosion To Orphan Well Risk Analysis In Terrebonne Parish, Taylor Reeves
Honors Capstones
No abstract provided.
Investigation Of The Use Of A Plasticizer-Polymer Sensor Coating With Improved Long-Term Stability In The Liquid Phase, Laura Jeanne Alderson
Investigation Of The Use Of A Plasticizer-Polymer Sensor Coating With Improved Long-Term Stability In The Liquid Phase, Laura Jeanne Alderson
Master's Theses (2009 -)
Benzene is one of the volatile organic compounds present in crude oil and gasoline. Leakage from underground storage tanks or hazardous waste sites can introduce benzene contamination into nearby groundwater. Benzene is a known carcinogen and its exposure is limited by the Environmental Protection Agency to 5 parts per billion (ppb) in drinking water. Early, accurate detection of the presence of benzene contamination in groundwater supplies is extremely important. Shear horizontal surface acoustic wave (SH-SAW) devices with a chemically sensitive coating can be used for the detection of volatile organic compounds in liquid, such as BTEX (benzene, toluene, ethylbenzene and …
Oil Recovery By Polymer Flooding; Sensitivity Analysis To Technical Parameters, Rana Osama Fahmi Saqer
Oil Recovery By Polymer Flooding; Sensitivity Analysis To Technical Parameters, Rana Osama Fahmi Saqer
Theses
Numerous enhanced oil recovery techniques including miscible gas injection, chemical, thermal and other methods are applied at the third phase of production after both primary and secondary recovery have been exhausted. Polymer flooding is one of the chemical methods that recover more oil by decreasing the mobility of the system; by increasing the viscosity of the injected water that results in an improvement in the volumetric sweep efficiency.
The objective of this work is to asses and select the development options using polymer process that maximize oil recovery for a synthetic reservoir model where technical parameters are optimized thoroughly.
Reservoir …
Influence Of Strong Preformed Particle Gels On Low Permeable Formations In Mature Reservoirs, Mahmoud O. Elsharafi, Baojun Bai
Influence Of Strong Preformed Particle Gels On Low Permeable Formations In Mature Reservoirs, Mahmoud O. Elsharafi, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
In mature reservoirs, the success of preformed particle gel (PPG) treatment rests primarily on the ability of the PPG to reduce and/or plug the high permeable formations but not damage the low permeable formations. Static test models (filtration test model and pressure test model) were used to determine the effect of PPG on low permeable formations. This work used a strong preformed particle gel, Daqing (DQ) gel made by a Chinese company. The particle gel sizes were ranged from 30 to 120 mesh for this work. PPGs are sized in a millimeter or micrometer, which can absorb over a hundred …
Thawing Out: The Role Of The Arctic Council Service In A Melting Arctic, Taylor J. Enos
Thawing Out: The Role Of The Arctic Council Service In A Melting Arctic, Taylor J. Enos
Pell Scholars and Senior Theses
With the changing natural and political climate of the Arctic, conflicts over resource extraction and navigation will become inevitable. Empowering an intergovernmental institution like the Arctic Council Service may be the only solution. This paper analyzes the importance and history of the Arctic as a political environment, which is prone to abuse in the very near future at the hands of Russia and the United States.
Oil Recovery By Flooding; Sensitivity Analysis To Technical Parameters, Rana Osama Fahmi Saqer
Oil Recovery By Flooding; Sensitivity Analysis To Technical Parameters, Rana Osama Fahmi Saqer
Theses
Numerous enhanced oil recovery techniques including miscible gas injection, chemical, thermal and other methods are applied at the third phase of production after both primary and secondary recovery have been exhausted. Polymer flooding is one of the chemical methods that recover more oil by decreasing the mobility of the system; by increasing the viscosity of the injected water that results in an improvement in the volumetric sweep efficiency.
The objective of this work is to asses and select the development options using polymer process that maximize oil recovery for a synthetic reservoir model where technical parameters are optimized thoroughly.
Reservoir …
Contact Angle And Ift Measurements Of Smart Water At Elevated Temperatures And Pressures For Evaluating Wettability In A Selected Carbonate Reservoir In The Uae, Jassim Abubacker Ponnambathayil
Contact Angle And Ift Measurements Of Smart Water At Elevated Temperatures And Pressures For Evaluating Wettability In A Selected Carbonate Reservoir In The Uae, Jassim Abubacker Ponnambathayil
Theses
Water flooding has been regarded as a well-known secondary oil recovery method. In the recent years, extensive research on crude oil, brine, and rock systems has acknowledged that the composition of the injected water can change wetting properties of the reservoir during a water flood in a promising way to improve oil recovery. Hence, injection of “smart water” with correct salinity and composition is considered as a tertiary recovery method. The mechanism behind wettability alteration that is promoted by smart water injection has been a topic of discussion in carbonate and sandstone formations. In this work, some key properties of …
Modeling Explosive Lensing On A Cylindrical Body In Air: A First Step Towards Sealing An Underwater Offshore Oil Spill, Phillip R. Mulligan
Modeling Explosive Lensing On A Cylindrical Body In Air: A First Step Towards Sealing An Underwater Offshore Oil Spill, Phillip R. Mulligan
Doctoral Dissertations
"In 2010, the British Petroleum (BP) Deepwater Horizon accident leaked oil into the Gulf of Mexico for 87 days. A fast response method that can seal an oil pipe and stop the release of oil is needed in order to prevent future oil leaks from turning into ecological and financial disasters. Explosives can serve this need.
This research examined how a circular implosive discontinuous explosive lens interacts with a cylindrical surface. The following research was designed to study the applicability of the Method this author developed to predict the peak pressure from multiple shockwaves converging on a centrally located cylinder. …
Analysis And Mitigation Of Wellbore Breakout And Fracturing, Reza Rahimi
Analysis And Mitigation Of Wellbore Breakout And Fracturing, Reza Rahimi
Doctoral Dissertations
"Mechanical wellbore integrity problems while drilling are mainly due to wellbore shear failure or tensile failure. To ensure wellbore integrity, breakout and fracture geomechanical analysis is conducted to estimate minimum and maximum drilling fluid densities. Currently, there is no agreement as to which rock failure criterion to use for estimating breakout or fracture criteria to use for analyzing drilling induced fractures. However, when wellbore integrity issues arise while drilling, mitigation strategies can be applied to rectify these problems.
This dissertation analyzes criteria for wellbore breakout and fracturing. Also, mitigation strategies for breakout and fracturing while drilling were experimentally investigated. Thirteen …
Wetting Kinetics In Forced Spreading, Amer Mohammad Al-Shareef
Wetting Kinetics In Forced Spreading, Amer Mohammad Al-Shareef
Doctoral Dissertations
"Under dynamic conditions, the dynamic contact angle (the angle that the liquid makes with the solid) of a liquid on a solid surface varies dramatically with substrate velocity from its equilibrium value. Experimental data of the dynamic contact angles for polydimethylsiloxane (PDMS or silicone oil) under air on a glass substrate coated with teflon, for water under PDMS, for solutions of the polymer polyethylene oxide (PEO) under air, for solutions of PEO under PDMS, were obtained to simulate and understand the systems of brine or brine containing a polymer displacing viscous crude. A variety of solid substrates were used other …
High-Temperature, High-Pressure Viscosities And Densities Of Toluene, Aaron J. Rowane
High-Temperature, High-Pressure Viscosities And Densities Of Toluene, Aaron J. Rowane
Theses and Dissertations
High-temperature, high-pressure (HTHP) conditions are exemplified in ultra-deep petroleum reservoirs and can be exhibited within diesel engines. Accurate pure component hydrocarbon data is essential in understanding the overall behavior of petroleum and diesel fuel at these conditions. The present study focuses on the HTHP properties of toluene since this hydrocarbon is frequently used to increase the octane rating of gasoline and toluene occurs naturally in crude oil. In this thesis experimental densities and viscosity are presented to 535 K and 300 MPa extending the database of toluene viscosity data to higher temperature than previous studies. The data is correlated to …
Bioluminescent Magnetic Nanoparticles As Potential Imaging Agents For Mammalian Spermatozoa, Erick Salvador Vasquez, Jean M. Feugang, Scott T. Willard, Peter L. Ryan, Keisha B. Walters
Bioluminescent Magnetic Nanoparticles As Potential Imaging Agents For Mammalian Spermatozoa, Erick Salvador Vasquez, Jean M. Feugang, Scott T. Willard, Peter L. Ryan, Keisha B. Walters
Chemical and Materials Engineering Faculty Publications
Background: Nanoparticles have emerged as key materials for developing applications in nanomedicine, nanobiotechnology, bioimaging and theranostics. Existing bioimaging technologies include bioluminescent resonance energy transfer-conjugated quantum dots (BRET-QDs). Despite the current use of BRET-QDs for bioimaging, there are strong concerns about QD nanocomposites containing cadmium which exhibits potential cellular toxicity.
Results: In this study, bioluminescent composites comprised of magnetic nanoparticles and firefly luciferase (Photinus pyralis) are examined as potential light-emitting agents for imaging, detection, and tracking mammalian spermatozoa. Characterization was carried out using infrared spectroscopy, TEM and cryo-TEM imaging, and ζ-potential measurements to demonstrate the successful preparation of these nanocomposites. Binding …
Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang
Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang
Masters Theses
”This work presents the evaluations of two products. One can be used for hydraulic fracturing to achieve viscosity stable under high shear rate, and the other is potential to be applied to enhance oil recovery from mature oilfield.
The first experiment is to synthesize and evaluate a new polymeric fracturing fluid that can resist high shear rate of 511-1 with favorable viscosity. Zirconium crosslinked fracturing fluids are lack of self-healing ability after shearing, and the difficulties still exist in maintaining viscous with lower polymer content exposed to high shearing conditions, therefore, the research is trying to develop a new …
A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi
A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi
Masters Theses
“Drilling mud losses and problems associated with lost circulation while drilling account for a major expense in drilling oil and gas wells. By industry estimates, more than 2 billion USD is spent annually to combat and mitigate this problem (Ali et al., 2015).
The South Rumaila field in Iraq is one of the largest oilfields in the world. Wells drilled in this field are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha and Shuaiba formations. Lost circulation events range from seepage losses to complete loss of the borehole and are a critical issue in field development. …
Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue
Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue
Masters Theses
"Carbon Dioxide (CO2) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO2, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO2 sequestration is the generation of new fractures or reopening of existing fractures caused by CO2 injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …
Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang
Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang
Masters Theses
"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …
Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang
Masters Theses
"Preformed particle gels (PPG) have been successfully applied as a plugging agent for plugging fractures and then divert displacing fluid into poorly swept zones. However, PPG propagation and plugging mechanisms through open fractures have not been studied thoroughly.
This work investigated the influence of some factors (particle size, brine concentration, heterogeneity, and brine salinity) on gel injectivity, plugging performance for water flow through open fractures. Five-foot tubes were used to mimic open fractures. Three models were designed to conduct the work, including (1) single fracture with uniform fracture width, (2) single fracture with different widths, and (3) two parallel fractures …
Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge
Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge
Masters Theses
"Water production is a challenging problem to be controlled during hydrocarbon-reservoirs production life. Disproportionate Permeability Reduction (DPR) is often used as water shutoff treatment in production wells when other conventional solutions like mechanical isolations are difficult to perform. This study applied numerical simulation methods to diagnose the factors impacting DPR treatment success on macroscopic level and to see when, where and at which conditions DPR treatment can give best results.
This work indicated that the following points should be considered before DPR treatment is executed in any reservoir to get a successful treatment. Firstly, this research explored that DPR performance …