Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Conformance control (5)
- Carbonate reservoirs (4)
- Enhanced oil recovery (3)
- Machine learning (3)
- Preformed particle gel (3)
-
- Biodiesel (2)
- Brownfields (2)
- Bulk gel treatments (2)
- Carboxymethyl cellulose (2)
- EOR floods (2)
- Ethanol (2)
- Field projects (2)
- Formation and channeling type (2)
- Gel treatment volume (2)
- Gel volume-concentration ratio (2)
- HPAM-Cr3 gels (2)
- Ionic composition (2)
- Optimal salinity (2)
- Plugging efficiency (2)
- Smart water flooding (2)
- Systematic design approach (2)
- Treatment-sizing strategy (2)
- Water control (2)
- AMPS-HPAM gel (1)
- Acrylamide and acrylic acid copolymers (1)
- Alternative fuels (1)
- Biofuel (1)
- Biofuels (1)
- Biomass (1)
- Blocking agent (1)
- Publication Year
- Publication
-
- Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works (54)
- Chemistry Faculty Research & Creative Works (2)
- Graduate Theses and Dissertations (2)
- Petroleum Engineering and Gas (2)
- Student Works (2020-2029) (2)
-
- Chemical and Biochemical Engineering Faculty Research & Creative Works (1)
- Chemical and Materials Engineering Faculty Publications (1)
- College of Business Publications (1)
- Electrical and Computer Engineering Faculty Research & Creative Works (1)
- Journal of Undergraduate Research at Minnesota State University, Mankato (1)
- Mathematics and Statistics Faculty Research & Creative Works (1)
- Miners Solving for Tomorrow Research Conference (1)
- Shelby Hall Graduate Research Forum Posters (1)
- Theses and Dissertations--Chemical and Materials Engineering (1)
- Yaşar Demirel Publications (1)
- Publication Type
Articles 1 - 30 of 72
Full-Text Articles in Petroleum Engineering
Mechanism Of Improved Miscibility Of Co2–Oil Systems By Multiester-Headgroup Surfactants, Ning Xu, Yanling Wang, Baojun Bai, Yu Zhang, Wenjing Shi, Zhaonian Zhang, Wenhui Ding, Peixu Ma, Zan Gao
Mechanism Of Improved Miscibility Of Co2–Oil Systems By Multiester-Headgroup Surfactants, Ning Xu, Yanling Wang, Baojun Bai, Yu Zhang, Wenjing Shi, Zhaonian Zhang, Wenhui Ding, Peixu Ma, Zan Gao
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
In the pursuit of carbon neutrality, the CO2-enhanced oil recovery provides dual benefits by enabling both carbon sequestration and incremental oil production. However, its application is limited by high minimum miscibility pressure. CO2-philic and oil-affinitive surfactants have emerged as an effective, low-dosage, and cost-efficient strategy to reduce the minimum miscibility pressure. In this study, macroscopic phase behavior experiments combined with molecular dynamics simulations were employed to systematically elucidate the influence of multiester-head surfactants on CO2–oil miscibility. Using a modified pressure–volume–temperature apparatus equipped with optical power monitoring, we determined that multiester-head surfactants reduced the first-contact …
Controlled Gelation Of Co₂-Resistant Polymer Systems For Improved Conformance In Co₂-Eor, Maryam Sharifi Paroushi
Controlled Gelation Of Co₂-Resistant Polymer Systems For Improved Conformance In Co₂-Eor, Maryam Sharifi Paroushi
Miners Solving for Tomorrow Research Conference
This presentation introduces a CO₂-resistant hydrogel developed to control fluid movement and improve CO₂ injection performance in subsurface reservoirs for Enhanced Oil Recovery (EOR) and Carbon Capture and Storage (CCS). Conventional polymer gels often lose strength in CO₂-rich environments, resulting in weak plugging, early breakdown, and ineffective flow control. To address this limitation, a sulfonated HPAM-based gel system crosslinked with chromium was developed. The effects of polymer concentration, molecular weight, crosslinker ratio, ionic strength, and pH were investigated to better understand gelation behavior and performance. The formulation exhibited controlled gelation, strong resistance to temperature and CO₂, and minimal shrinkage over …
Isolated Bacillus Licheniformis Sp01 From Daqing Oilfield In Reducing Chromium(Iii) Crosslinked Polymer Residue And Enhancing Oil Recovery, Xiao Hui
Student Works (2020-2029)
After polymer gel formation, the residual partially hydrolyzed polyacrylamide (HPAM) and the crosslinker (Cr3+) caused plugging and decreased oil recovery. Microorganisms can degrade HPAM to address the issues, but Cr³⁺ inhibits the process and reduces oil recovery. This study explores the underexamined biodegradation of HPAM and improved oil recovery in the presence of Cr³⁺, offering new perspectives for microbial enhanced oil recovery (MEOR) after polymer gel formation. HPAM and crude oil were innovatively used as the sole nitrogen(N) and carbon(C) sources to isolate the best-growing strain from Daqing Oilfield produced water, identified as Bacillus licheniformis SP01. The oil displacement potential …
Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei
Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …
Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai
Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai
Chemistry Faculty Research & Creative Works
Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO2-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …
Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei
Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Controlling CO2 channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO2 injection. Chromium-based crosslinkers (CrAc and CrCl3) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …
Solubility And Dissolution Mechanism Of Novel Multi-Ester Headgroup Surfactants In Supercritical Co2, Ning Xu, Yan Ling Wang, Baojun Bai, Shi Zhang Cui, Yu Zhang, Wen Jing Shi, Zhao Nian Zhang, Wen Hui Ding, Pei Xu Ma, Zan Gao
Solubility And Dissolution Mechanism Of Novel Multi-Ester Headgroup Surfactants In Supercritical Co2, Ning Xu, Yan Ling Wang, Baojun Bai, Shi Zhang Cui, Yu Zhang, Wen Jing Shi, Zhao Nian Zhang, Wen Hui Ding, Pei Xu Ma, Zan Gao
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
To address the limited solubility and applicability of conventional hydrocarbon surfactants in supercritical CO2, a series of multi-ester headgroup surfactants were designed and synthesized by leveraging the CO2-philic properties of ester groups. The molecular structures were characterized using Fourier transform infrared (FT-IR) spectroscopy and 1H NMR. A custom-designed laser-based apparatus was developed to quantify surfactant solubility and systematically investigate phase behavior in CO2. Molecular dynamics (MD) simulations were employed to elucidate structure–solubility relationships across multiple scales, including solubility parameters, interaction energies, radial distribution functions (RDFs), and free volume fractions. Results indicate that, at 323.15 K, …
Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai
Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai
Chemistry Faculty Research & Creative Works
To understand the applicability of high-temperature preformed particle gel (HT-PPG) for control of short-circuiting in enhanced geothermal systems (EGSs), core flooding experiments were conducted on fractured granite cores under varying fracture widths, gel particle sizes and swelling ratios. Key parameters such as injection pressure, water breakthrough pressure, and residual resistance factor were measured to evaluate HT-PPG performance. The gel exhibited strong injectability, entering granite fractures at pressure gradients as low as 0.656 MPa/m; HT-PPG yields a superior sealing performance by significantly reducing the permeability; and dehydration occurs during HT-PPG propagation, with a dehydration ratio ranging from 4.71% to 11.36%. This …
Effect Of Clays On The Spontaneous Imbibition Behavior Of Surfactant Solutions In Shale Oil Reservoirs, Ning Xu, Yanling Wang, Baojun Bai, Chuanbao Zhang, Shizhang Cui, Yu Zhang, Di Li, Wenjing Shi, Wenhui Ding
Effect Of Clays On The Spontaneous Imbibition Behavior Of Surfactant Solutions In Shale Oil Reservoirs, Ning Xu, Yanling Wang, Baojun Bai, Chuanbao Zhang, Shizhang Cui, Yu Zhang, Di Li, Wenjing Shi, Wenhui Ding
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Surfactant-enhanced spontaneous imbibition is a proven method of enhancing oil recovery from shale reservoirs. However, a significant knowledge gap concerning the impact of clay minerals on surfactant-enhanced imbibition in shale reservoirs remains. Therefore, this study first analyzed the mineral composition and pore structure of the shale reservoirs. Subsequently, three surfactants were selected for spontaneous imbibition experiments. The influence of various clay minerals on the surfactant imbibition was assessed by considering various properties of the imbibition system. The results showed that the shale pores primarily consisted of macropores (44.03%) and mesopores (43.94%). Surfactants enhance the imbibition recovery by altering the wettability …
Upcycling Waste To Wealth: Cuo-Sio₂/Reduced Graphene Nanocomposite From Pomegranate Peels For One-Pot Low-Temperature Conversion Of Waste Oils Into Valuable Fatty Acid Monomers, Attia Attia, Shahenda Mahran Dr., Maria Centeno Prof., Basudeb Saha
Upcycling Waste To Wealth: Cuo-Sio₂/Reduced Graphene Nanocomposite From Pomegranate Peels For One-Pot Low-Temperature Conversion Of Waste Oils Into Valuable Fatty Acid Monomers, Attia Attia, Shahenda Mahran Dr., Maria Centeno Prof., Basudeb Saha
Petroleum Engineering and Gas
and hence reduce the price of the fatty acid monomers. This study reports for the first time a novel, environmentally benign, highly active copper oxide-silica oxide/reduced graphene oxide (CuO-SiO2/RGO), heterogeneous nano-catalyst derived from waste pomegranate peels, for the one-pot, low-temperature synthesis of fatty acid monomers from high-acid-value waste vegetable oil (WVO). The synthesised nano-catalyst was extensively characterised using XRD, FT-IR, TEM, SEM, EDX and TGA-DTA. Further, it was utilised to synthesise fatty acidrich oleic phenoxypropyl acrylate (OPA) monomer from high acid value WVO via a single-step reaction.
Dissolution Mechanism Of Nonionic Polyether Surfactants In Supercritical Co2, Ning Xu, Yanling Wang, Baojun Bai, Shizhang Cui, Zan Gao, Yu Zhang, Di Li, Wenjing Shi, Wenhui Ding, Peixu Ma
Dissolution Mechanism Of Nonionic Polyether Surfactants In Supercritical Co2, Ning Xu, Yanling Wang, Baojun Bai, Shizhang Cui, Zan Gao, Yu Zhang, Di Li, Wenjing Shi, Wenhui Ding, Peixu Ma
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Polyoxyethylene ether is an efficient CO2-philic compound with significant potential applications in CO2 flooding, which requires CO2-philic surfactants with high solubility in supercritical CO2 (scCO2). This study elucidates the molecular and atomic-level dissolution mechanism of the fatty alcohol polyoxyethylene ether (AEO) in scCO2 by combining phase-behavior experiments and molecular dynamics simulations. The solubility of AEO in scCO2 is measured using a semiconductor laser. AEO containing three polyoxyethylene (EO) groups exhibited the highest solubility in scCO2.The solubility of AEO in scCO2 decreased with an increase in the number …
Investigation Of Retention And Dehydration Of Preformed Particle Gel For Conformance Control In Fractured Carbonates, Abdulaziz A. Almakimi, Abdullah O. Almansour, Junchen Liu, Baojun Bai, Ibnelwaleed A. Hussein
Investigation Of Retention And Dehydration Of Preformed Particle Gel For Conformance Control In Fractured Carbonates, Abdulaziz A. Almakimi, Abdullah O. Almansour, Junchen Liu, Baojun Bai, Ibnelwaleed A. Hussein
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Preformed particle gel (PPG) treatment has proved to be among the most effective methods to reduce excessive water production in fractured reservoirs. The blocking ability of PPGs to fractures or fracture-like features is highly dependent on injected gel properties and volume. Gel dehydration during extrusion through fracture is common and has a considerable effect on gel properties, transport, and plugging efficiency. As the gel particles propagate through the fracture, continuous dehydration is often associated and causes the gel to concentrate and require high-pressure gradients to move. Dehydration might be desirable to a certain limit because it can help to form …
Enhancing Oil Recovery With Novel Nano-Particle-Infused Surfactant Biopolymer Composite: A Comprehensive Investigation, Attia Attia, Amira Shafaay Dr., Michael Sami Alfonse Eng., George Azmi Eng., Rania Ramadan
Enhancing Oil Recovery With Novel Nano-Particle-Infused Surfactant Biopolymer Composite: A Comprehensive Investigation, Attia Attia, Amira Shafaay Dr., Michael Sami Alfonse Eng., George Azmi Eng., Rania Ramadan
Petroleum Engineering and Gas
The oil industry worldwide is searching for a new way to increase oil recovery. Chemical flooding has been used worldwide to improve oil recovery. In this research, the study of Enhanced Oil Recovery was carried out by using an Egyptian oil of API 42◦; the experiments were done by using Xanthan biopolymer (XG) gum with sodium dodecylbenzene sulfonate (SDBS) as a composite for the EOR process and studying the impact of different composite concentrations on oil recovery. Design Expert software was used to determine the optimum concentrations of the composite. 500 ppm concentration of graphene cobalt samarium ferrite nanoparticles (NP) …
Effect Of Pre-Adsorbed Species On High-Pressure Adsorption Of Methane In Zeolite 5a Using Grand Canonical Monte Carlo (Gcmc) Simulations, Kanhamardi Lao, Brooks D. Rabideau
Effect Of Pre-Adsorbed Species On High-Pressure Adsorption Of Methane In Zeolite 5a Using Grand Canonical Monte Carlo (Gcmc) Simulations, Kanhamardi Lao, Brooks D. Rabideau
Shelby Hall Graduate Research Forum Posters
Natural gas upgrading, which removes impurities from methane (CH4), is essential for industrial applications, including liquefied natural gas (LNG) production and power generation, as well as for residential use. Removing non-hydrocarbon impurities such as carbon dioxide (CO2), nitrogen (N2), and water vapor (H2O), among others, along with separating heavier hydrocarbon gases from raw natural gas, is required to achieve high- purity methane and prevent pipeline corrosion. Zeolite 5A is a microporous aluminosilicate material with a pore size of approximately 5 Å, containing sodium and calcium cations that balance the framework’s negative charge. Its structure offers high thermal stability and a …
Reinforcing Polymer Flooding System With Dendritic Mesoporous Silica Nanoparticles For Improved Oil Recovery, Di Li, Yanling Wang, Baojun Bai, Ning Xu, Wenjing Shi, Yu Zhang, Wenhui Ding, Peixu Ma, Zan Gao
Reinforcing Polymer Flooding System With Dendritic Mesoporous Silica Nanoparticles For Improved Oil Recovery, Di Li, Yanling Wang, Baojun Bai, Ning Xu, Wenjing Shi, Yu Zhang, Wenhui Ding, Peixu Ma, Zan Gao
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Dendritic mesoporous silica nanoparticles (DMSNs), characterized by a high specific surface area and abundant hydroxyl groups, offer a promising approach to enhancing the performance of amphiphilic polymers in challenging enhanced oil recovery (EOR) conditions. In this study, DMSNs were successfully synthesized, and systematically evaluated for their impact on the solution properties of a betaine amphiphilic polymer (PADC). The unique "flower-like" mesoporous structure of DMSNs provided approximately 7-fold higher surface area than conventional SiO2, facilitating enhanced polymer-nanoparticle interactions. The DMSN/PADC composite system exhibited significantly improved viscosity, salt resistance, thermal tolerance, and shear resistance compared to PADC and SiO2/PADC systems. Quantum chemical …
Using Preformed Particle Gels To Control Transport In Geothermal Reservoirs: Mathematical Modeling, Philip Winterfeld, Baojun Bai, Yu Shu Wu
Using Preformed Particle Gels To Control Transport In Geothermal Reservoirs: Mathematical Modeling, Philip Winterfeld, Baojun Bai, Yu Shu Wu
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
We are developing swellable Preformed Particle Gels (PPG), which can control preferential fluid and heat flow through fracture networks to increase the performance of EGS reservoirs. Part of this development is a mathematical model and numerical simulator to simulate PPG treatments by considering coupled thermal-hydraulic-mechanical effects, and gel swelling kinetics and plugging efficiency, from which an optimized gel treatment design and operation can be achieved. The starting point for our mathematical model is the TOUGH2-CSM formulation and code. The TOUGH2-CSM fluid and heat flow formulation is based on the TOUGH2 one for multiphase, multicomponent, and multi-porosity systems, with the latter …
Investigation Of Dynamic Adsorption And Desorption Of Polymer Nanogel In Porous Media Through Microfluidics, Junchen Liu, Fuqiao Bai, Abdulaziz A. Almakimi, Mingzhen Wei, Xiaoming He, Ibnelwaleed A. Hussein, Baojun Bai
Investigation Of Dynamic Adsorption And Desorption Of Polymer Nanogel In Porous Media Through Microfluidics, Junchen Liu, Fuqiao Bai, Abdulaziz A. Almakimi, Mingzhen Wei, Xiaoming He, Ibnelwaleed A. Hussein, Baojun Bai
Mathematics and Statistics Faculty Research & Creative Works
Understanding the transport and retention of elastic nanogel and microgel particles in porous media has been a significant research subject for decades, essential to the application of enhanced oil recovery (EOR). However, a lack of dynamic adsorption and desorption studies, in which the kinetics in porous media are seldom investigated, hinders the design and application of polymer nanogel in underground porous media. In this work, we visualized and quantified the transport and dynamic adsorption of polymer nanogel in 3D glass micromodels that were manufactured by packing glass beads in capillaries. Calibrating the linearity of fluorescence intensity to concentration, we calculated …
Predictive Modeling For Optimal Gel Treatment Design In Brownfields Using Ensemble Machine Learning And Data Upsampling Via Generative Ai, Munqith Aldhaheri, Baojun Bai, Mingzhen Wei
Predictive Modeling For Optimal Gel Treatment Design In Brownfields Using Ensemble Machine Learning And Data Upsampling Via Generative Ai, Munqith Aldhaheri, Baojun Bai, Mingzhen Wei
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Efficiently designed gel treatments play a vital role in extending the lifespan of brownfields through rejuvenating oil production. Recently, a three-mode mathematical methodology named the VCR approach has been proposed for designing effective treatments. To optimize this approach, it is crucial to determine the appropriate design mode systematically rather than relying solely on the intuitive judgments of field operators. This study introduces an advanced methodology for predicting the optimal design type of gel treatments using 12 reservoir and production variables. The methodology integrates ensemble machine-learning (EML) models with historical data from 65 field projects across 11 countries (1985-2020). The Random …
Experimental Evaluation Of A Recrosslinkable Co2-Resistant Micro-Sized Preformed Particle Gel For Co2 Sweep Efficiency Improvement In Reservoirs With Super-K Channels, Adel Alotibi, Tao Song, Ali Al Brahim, Baojun Bai, Thomas P. Schuman
Experimental Evaluation Of A Recrosslinkable Co2-Resistant Micro-Sized Preformed Particle Gel For Co2 Sweep Efficiency Improvement In Reservoirs With Super-K Channels, Adel Alotibi, Tao Song, Ali Al Brahim, Baojun Bai, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
A recross linkable CO2-resistant branched preformed particle gel (CO2-BRPPG) was developed for controlling CO2 injection conformance, particularly in reservoirs with super-permeable channels. Previous work focused on a millimeter-sized CO2-BRPPG in open fractures, but its performance in high-permeability channels with pore throat networks remained unexplored. This study used a sand pack model to evaluate a micro-sized CO2-BRPPG under varying conditions of salinity, gel concentration, and pH. at ambient conditions, the equilibrium swelling ratio (ESR) of the gel reached 76 times its original size. This ratio decreased with increasing salinity but remained stable …
Carboxymethyl Cellulose-Based Preformed Particle Gels For Water Management In Oil And Gas Reservoirs, Ahmed Ben Ali, Ahmed Hamza, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Carboxymethyl Cellulose-Based Preformed Particle Gels For Water Management In Oil And Gas Reservoirs, Ahmed Ben Ali, Ahmed Hamza, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Carboxymethyl cellulose (CMC) based materials have been proposed as preformed particle gels (PPGs) for reducing excessive water production in oil and gas reservoirs. Multi-sized dry particles ranging between 100 and 1180 μm have been synthesized using microwave-assisted grafting copolymerization of CMC and acrylamide (AM)/n,n''-methylene-bisacrylamide (MBA). FTIR and SEM confirmed CMC crosslinked polyacrylamide's chemical structure and morphology (CMC/CPAM). Thermo-gravimetric analysis has demonstrated the thermal stability of dry PPGs up to 309 °C. CMC/CPAM showed slightly high absorbency in brine 2 (TDS = 67.3 g/L) compared to brine 1 (TDS = 33.65 g/L), 1% NaCl, and deionized water, with swelling ratios (SR) …
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-Based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. the new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai
A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. The new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …
Development Of Agar-Based Preformed Particle Gel For Water Control In High-Salinity Reservoirs, Ahmed Ben Ali, Reem Elaf, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Development Of Agar-Based Preformed Particle Gel For Water Control In High-Salinity Reservoirs, Ahmed Ben Ali, Reem Elaf, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Oil Extraction Faces Challenges in Cost and Complexity Due to Excessive Water Production, Leading to Diminished Hydrocarbon Recovery. Preformed Particle Gels (PPGs) Hold Promise for Enhancing Oil Recovery and Sealing High-Permeability or Fractured Zones. However, Current PPGs Encounter Limitations in High-Temperature Reservoirs, Including Salt Sensitivity and Potential Hazards. to Address These Issues, We Propose Eco-Friendly PPGs Utilizing Agar Polysaccharides. Agar Backbones Grafted with Acrylamide (AM) and AM/N,N′-Methylenebis(AM) (MBA) Via Microwave-Assisted Techniques Resulted in Polyacrylamide Grafted Agar (Ag/PAM) and Cross-Linked Polyacrylamide Grafted Agar (Ag/PAMBA). Various Sizes (75 Μm to 1.18 Mm) Were Prepared to Accommodate Diverse Reservoir Porosities and Ensure Effective …
Laboratory Evaluation Of High-Temperature Resistant Lysine-Based Polymer Gel Systems For Leakage Control, Tao Song, Xuyang Tian, Baojun Bai, Yugandhara Eriyagama, Mohamed Ahdaya, Adel Alotibi, Thomas P. Schuman
Laboratory Evaluation Of High-Temperature Resistant Lysine-Based Polymer Gel Systems For Leakage Control, Tao Song, Xuyang Tian, Baojun Bai, Yugandhara Eriyagama, Mohamed Ahdaya, Adel Alotibi, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
In-situ crosslinking gel known for its cost-effectiveness, has been employed for decades to plug high-permeability features in subsurface environments. However, some commonly used crosslinkers are being phased out due to the increasingly rigorous environmental regulations. As a newly discovered environmentally friendly crosslinker, lysine can crosslink the partially hydrolyzed polyacrylamide through transamidation reaction. The present work aimed to study the effect of polymer composition and concentration on the gelation behavior of lysine and high molecular weight acrylamide-based polymers. Several commercial high molecular weight polymers with different contents of 2-Acrylamido-2-methyl-1-propane sulfonic acid (AMPS) including AN-105/125, SAV-55/37/28, and SAV-10 were deployed in this …
Development Of Inorganically Cross-Linked Sulfonated Polyacrylamide Preformed Particle Gels For Conformance Control: Impact Of Anionic Groups, Reem Elaf, Ahmed Hamza, Hassan Nimir, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Development Of Inorganically Cross-Linked Sulfonated Polyacrylamide Preformed Particle Gels For Conformance Control: Impact Of Anionic Groups, Reem Elaf, Ahmed Hamza, Hassan Nimir, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Modern oil and gas extraction faces challenges, notably from the surplus of produced water, hampering hydrocarbon recovery and raising environmental and economic concerns. A promising solution is the injection of preformed particle gels (PPGs) into the reservoir's fractures and high permeability zones, facilitating production processes. This study introduces a novel class of inorganically cross-linked PPGs with exceptionally high swelling capacities, comprising sulfonated polyacrylamide cross-linked with aluminum attached to acetate, nitrate, sulfate, and lactate anions individually. These PPGs function as superabsorbents, capable of absorbing water at a ratio of 100-700 times their dry weight while maintaining adequate gel strength up to …
Would Self-Supported Fracture Contribute To The Hydrocarbon Production In Shale Reservoir Besides Proppant-Supported Fracture, Y. Sun, G. Li, S. Zeng, J. Wu, J. Liu, M. Xu, C. Dai, Baojun Bai
Would Self-Supported Fracture Contribute To The Hydrocarbon Production In Shale Reservoir Besides Proppant-Supported Fracture, Y. Sun, G. Li, S. Zeng, J. Wu, J. Liu, M. Xu, C. Dai, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
During hydraulic fracturing in deep shale gas reservoirs, it is difficult to pump proppants long distances, and self-supported fractures are formed at the far and upper ends of the fractures. The self-supported fracture could hold the fracture space by its surface structure again fracture closure. However, it faces various aspects of impairment during shale gas reservoir development, which affect its conductivity. Among the impairment, long-term production results in a decline of bottom hole pressure, which will compact the fracture space, and self-supported fractures without proppant are more sensitive than those with proppant. In this paper, we conducted a series of …
Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song
Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
This Paper Surveys the Role of Re-Crosslink able Preformed Particle Gels (RPPG) in Addressing Conformance Challenges within Mature Oilfields. Despite Widespread Preformed Particle Gel (PPG) Application in 15,000+ Wells, their Limitations in Sealing Fractures and Conduits Prevalent in Mature Reservoirs Have Driven the Development of RPPG Formulations. Synthesized in Various Sizes from Micrometer to Millimeter Levels, These Environmentally Friendly RPPGs Are Tailored for Diverse Reservoir Conditions. Findings Showcase the Successful Laboratory-Scale Creation and Upscaling of RPPG Products, Offering Adaptability to Temperatures from 20 to 175°C, Customizable Sizes, Swelling Ratios (5 to 40 Times), and Re-Crosslinking Times Spanning Minutes to Days. …
Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman
Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …
Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao
Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Smart water flooding is a promising eco-friendly method for enhancing oil recovery in carbonate reservoirs. the optimal salinity and ionic composition of the injected water play a critical role in the success of this method. This study advances the field by employing machine learning and data analytics to streamline the determination of these critical parameters, which are traditionally reliant on time-intensive laboratory work. the primary objectives are to utilize data analytics to examine how smart water flooding influences wettability modification, identify key parameter ranges that notably alter the contact angle, and formulate guidelines and screening criteria for successful lab design. …
Evaluation Of Novel Preformed Particle Gel System For Conformance Control In Mature Oil Reservoirs, Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A. Hussein, Baojun Bai
Evaluation Of Novel Preformed Particle Gel System For Conformance Control In Mature Oil Reservoirs, Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A. Hussein, Baojun Bai
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250–800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the …