Open Access. Powered by Scholars. Published by Universities.®

Petroleum Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 4 of 4

Full-Text Articles in Petroleum Engineering

Investigations Of Carbon Dioxide Storage In Low-Temperature Reservoirs For Non-Leaking Storage, Md Nahin Mahmood Jun 2026

Investigations Of Carbon Dioxide Storage In Low-Temperature Reservoirs For Non-Leaking Storage, Md Nahin Mahmood

Doctoral Dissertations

Carbon dioxide (CO₂) injection into subsea or low-temperature water zones has emerged as a promising strategy for long-term, non-leaking CO₂ storage through the formation of solid hydrates. This research investigates CO₂ injection into Berea sandstone cores saturated with water under simulated subsea conditions, focusing on hydrate formation behavior across varying temperatures, pressures, and injection flow rates. Experimental results demonstrate that CO₂ hydrate formation under dynamic (flowing) conditions occurs at significantly higher pressure compared to static conditions reported previously. At temperatures ranging from 0 °C to 5 °C, dynamic hydrate formation pressures were observed to be approximately double. This can be …


Geological Carbon Storage In Deep, Low Permeable Shale Reservoirs: Insights From The Haynesville Formation, Louisiana, Himakshi Goswami Jun 2026

Geological Carbon Storage In Deep, Low Permeable Shale Reservoirs: Insights From The Haynesville Formation, Louisiana, Himakshi Goswami

Masters Theses

As global initiatives to mitigate greenhouse gas emissions intensify, depleted unconventional shale gas formations have emerged as critical candidates for large-scale geological carbon storage (GCS). This study investigates the feasibility, dynamic trapping mechanisms, and operational optimization of CO₂ sequestration in deep, low-permeability shale reservoirs, using the Upper Jurassic Haynesville Shale in northwest Louisiana as a comprehensive case study. Compositional reservoir simulation (CMG GEM 2021.10) was performed using the SPE Haynesville dataset, with CO₂ injected at a rate of 10,000 ft³/day across single and multiple depth intervals spanning 11,290–11,314 feet. Results demonstrate that multi-depth injection significantly improves residual trapping, reduces buoyancy-driven …


Mitigating Surfactant-Gas Interactions In Associated Gas Reservoirs: A Simulation And Machine Learning Guided Approach, Francis Dela Nuetor Jun 2026

Mitigating Surfactant-Gas Interactions In Associated Gas Reservoirs: A Simulation And Machine Learning Guided Approach, Francis Dela Nuetor

Masters Theses

Surfactant flooding is a promising chemical enhanced oil recovery (EOR) method for mobilizing residual oil through interfacial tension reduction and wettability alteration. However, its performance in associated-gas reservoirs can be limited by salinity, gas composition, surfactant adsorption, and possible chemical instability. This study investigates the effect of salinity on surfactant flooding efficiency using an integrated reservoir simulation and machine learning workflow. A synthetic three-dimensional reservoir model was developed in ECLIPSE using a 10 × 10 × 3 Cartesian grid to simulate surfactant flooding over a 300-day production period under salinity conditions ranging from 100 to 50,000 ppm. Key outputs, including …


Optimizing Co₂ Wag Flooding Parameters For Enhanced Oil Recovery And Formation Damage Control In Asphaltene Reservoirs Using Soft Experimentation, Derrick Amoah Oladele Jun 2026

Optimizing Co₂ Wag Flooding Parameters For Enhanced Oil Recovery And Formation Damage Control In Asphaltene Reservoirs Using Soft Experimentation, Derrick Amoah Oladele

Masters Theses

CO₂ Water Alternating Gas flooding has become an important enhanced oil recovery process in increasing oil production in medium to heavy oil reservoirs. However, CO₂ injections have the potential to cause asphaltene destabilization, leading to precipitation, deposition, and pore plugging. This study evaluated and optimized the effect of CO₂ flooding parameters to maximize oil recovery and minimized formation damage. Eclipse 300 compositional reservoir simulator was used to assess the effect of CO₂ Water Alternating Gas (WAG) Injection Rate, WAG Ratio, and CO₂ Water Alternating Gas (WAG) Injection Pressure on the reservoir. Predictive models for Cumulative Oil Production (FOPT) and Asphaltene …