Petroleum Engineering Commons^™

Evaluation Of Novel Preformed Particle Gel System For Conformance Control In Mature Oil Reservoirs, Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250–800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the …

Biodegradable Preformed Particle Gel (Ppg) Made Of Natural Chitosan Material For Water Shut-Off Application, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Hassan Nimir, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Oil and Gas Extraction Frequently Produces Substantial Volumes of Produced Water, Leading to Several Mechanical and Environmental Issues. Several Methods Have Been Applied over Decades, Including Chemical Processes Such as In-Situ Crosslinked Polymer Gel and Preformed Particle Gel, Which Are the Most Effective Nowadays. This Study Developed a Green and Biodegradable PPG Made of PAM and Chitosan as a Blocking Agent for Water Shutoff, Which Will Contribute to Combating the Toxicity of Several Commercially Used PPGs. the Applicability of Chitosan to Act as a Crosslinker Has Been Confirmed by FTIR Spectroscopy and Observed by Scanning Electron Microscopy. Extensive Swelling Capacity …

Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The effects of various material compositions and reservoir environments on the ultimate strength and swelling kinetics of a commercial preformed particle gel (PPG) have been investigated. This study used different ratios of acrylamide and acrylic acid copolymers with a specific crosslinker concentration. Results have indicated that increasing the acrylic acid proportion enhances the PPGs' ability to swell but weakens their network structure. In contrast, increasing the crosslinker content decreases the swelling ratio and increases the gel strength. The highest equilibrium swelling capacity among the six preformed particle gel samples was obtained for PPG2, which has the highest acrylic acid amount …

Selective Penetration Behavior Of Microgels In Superpermeable Channels And Reservoir Matrices, Yang Zhao, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment is an effective way to attack excessive water production in many mature oilfields around the world. Selective penetration is desired for successful gel treatments. That is, gel materials should easily penetrate the target zones (i.e., channeling features such as superpermeable channels) without entering/damaging the nontarget zones (i.e., reservoir matrices or oil zones). This study revealed that presence of threshold penetration pressure (ΔPth) was responsible for selective penetration behavior of tested microgels. The concept of ΔPth was utilized to figure out favorable working conditions for effective gel treatments. Microgel dispersions were injected into superpermeable (super-k) sandpacks (mimicking super-k channels …

Plugging Performance Of Preformed Particle Gels In Fractures And Its Influencing Factors, Ze Wang

Doctoral Dissertations

"Preformed particle gels (PPG) has been successfully applied to combat the water channeling caused by fractures or fracture-like channels. Understanding the placement and plugging of PPG in fractures is crucial for gel treatment design. The objective of the dissertation is to explore the plugging performance of three PPG products in two types of fracture models, the partially and fully open fractures. The following studies has been conducted and conclusions have been drawn based on the results and analysis. First, the placement and plugging performance of conventional PPG was investigated using core flooding experiments conducted partially open fractures. The plugging efficiency …

Influence Of Strong Preformed Particle Gels On Low Permeable Formations In Mature Reservoirs, Mahmoud O. Elsharafi, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In mature reservoirs, the success of preformed particle gel (PPG) treatment rests primarily on the ability of the PPG to reduce and/or plug the high permeable formations but not damage the low permeable formations. Static test models (filtration test model and pressure test model) were used to determine the effect of PPG on low permeable formations. This work used a strong preformed particle gel, Daqing (DQ) gel made by a Chinese company. The particle gel sizes were ranged from 30 to 120 mesh for this work. PPGs are sized in a millimeter or micrometer, which can absorb over a hundred …

Particle Gel Propagation And Blocking Behavior Through High Permeability Streaks And Fractures, Abdulmohsin Imqam

Doctoral Dissertations

Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks and fractures. These streaks and fractures prevent large amounts of oil from being recovered. The ultimate objective of this research was to provide comprehensive insight into designing better particle gel treatments intended for use in large openings, including open fractures, high permeability streaks, and conduits to increase oil recovery and reduce water production.

An intensive laboratory study was conducted to better understand the injection and placement mechanisms of millimeter and micron size preformed particle gels (PPGs) through thief …

Preformed Particle Gel Transport Through Fractures, Hao Zhang

Doctoral Dissertations

"Polymer gel treatment is one of the most cost-effective methods to control water production in mature oil fields. The main objective of gel treatments is to reduce water or gas flow through high-permeability channels or fractures without damaging productive zones. Preformed particle gels (PPGs) have been applied for conformance control because they can overcome some potential drawbacks inherent in an in-situ gelation system.

In this study, lab experiments were performed to quantify PPG propagation through fractures and fracture-like channels by using screen models and open fracture models. The main findings in these experiments can guide the selection of best particle …