Petroleum Engineering Commons^™

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …

Assessing The Geomechanical Modelling Of Underground Reservoir For Co₂ Storage Trapping Mechanisms, Bonavian Hasiholan, Mohammed Ali Farea, Elhassan Mostafa Abdallah, Sami Abdelrahman M. Yagoub, Yasir Mukhtar

Mathematical Modelling and Numerical Simulation with Applications

Effective carbon dioxide (CO₂) storage is essential for mitigating climate change amid increasing global greenhouse gas emissions. This study investigates the influence of geomechanics on CO₂ storage performance within carbon capture and storage (CCS), focusing on structural, residual, and solubility trapping mechanisms using a fully coupled modeling framework. Two numerical models, with and without geomechanical effects, are developed to evaluate impacts on reservoir behavior, CO₂ migration, and trapping efficiency. Each mechanism is analyzed separately and within an integrated framework to assess their combined contributions. Results indicate that geomechanical coupling increases reservoir pressure, reduces CO₂ flow velocity, enhances migration control, and …

Predicting Simulation Times For Multiphase Thermal-Hydraulic Models, Andrew Yule, Andrew Taylor

SMU Data Science Review

Addressing the challenge of computationally intensive OLGA

simulations in the oil and gas industry, a machine learning framework is

developed for accurate runtime prediction. A specialized feature extraction

pipeline identifies key parameters—such as simulation time, time step,

number of branches, and section count—from OLGA input files that serve as

high-impact predictors. Multiple predictive models, including regression,

tree-based ensembles, and neural networks, are implemented to validate

accuracy and robustness. Results reveal that prioritizing simulations based on

predicted runtimes optimizes licensing resources and reduces operational

costs, making real-time scheduling more efficient. This research demonstrates

the effectiveness of data-driven runtime prediction in enhancing …

Detection Of Oil Pollution On The Tigris River In Iraq Using Fluorescence And Reflecting Techniques, Ahmad K. Ahmad, Thamer M. Mohammed

Karbala International Journal of Modern Science

In this study, a broadband light source (visible and ultraviolet) was used to name minerals via fluorescence spectra and estimate slick oil thickness, ranging from sub-millimetres, using the reflecting spectrum technique. Using a fluorescent technique, we obtained fluorescence spectra of the samples, converting and processing the signals to produce high-resolution data, which enabled the identification of the types of dissolved elements and oil slicks in the Tigris River, highlighting pollution sources and potential control measures. This system aims to show the faint signal in fluorescence samples collected from the cooling system outlet water throughout the refining process from AL-Dora (Baghdad) …

Approach Formula To Increase Energy Efficiency Of Internal Combustion Engines In The “Green Economy” And Impact On The Natural Ecosystem, Zakirjon Ergashevich Musabekov, Hilola Zokir Qizi Uralova, Sayyodbek Ilxomjon O‘G‘Li Abdullajonov

Technical science and innovation

This article discusses, analyzes, and proposes solutions for the role of internal combustion engines in forming a "green economy", as well as ways to replace or modernize them. The relationship between internal combustion engines and the "green economy," as well as their energy efficiency and impact on natural ecosystems, is a crucial and urgent issue. These engines primarily generate energy through the combustion of petroleum-based fuels such as gasoline and diesel. However, this process releases harmful gases into the atmosphere, contributing to environmental degradation. The green economy is an economic model designed to protect the environment, ensure the efficient management …

Strategic Site Selection For Bio-Lng Plant In Indonesia: A Multi-Criteria Scoring Method Approach, Edma Nadhif Oktariani, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

In Indonesia, the energy sector is still predominantly reliant on fossil fuels, with renewable energy, including liquefied biomethane (Bio-LNG), playing a limited role. Nonetheless, Indonesia has significant potential for Bio-LNG development due to its abundant organic waste resources such as Palm Oil Mill Effluent (POME) from palm oil mills. Having approximately 891 Palm Oil Mills in Indonesia and being spread mostly in Sumatra, this study aims to select a strategic location for a Bio-LNG plant that can enhance logistical efficiency and economic viability for the plant. This study uses Multi-Criteria Decision Making (MCDM) methodologies to assess potential sites based on …

Study Of Technological Parameters On Catalytic Hydroisomerisation Of Aromatic Hydrocarbons Into Alkyl Naphthenic Hydrocarbons, Habibullaeva Mirzaxmatovna Ra'no, Nodira Turobjonovna Torayeva, Temurbek Z. Daminov, Murod Azimovich Eshmukhamedov

Technical science and innovation

The article presents experimental results of the catalytic hydroisomerization of aromatic hydrocarbons into alkyl naphthenic hydrocarbons. Aluminum col-molybdenum with silicon oxides has been studied as a catalytic system, which imparts acidic properties to the catalytic system and stimulates isomerization.

The dehydrogenation reaction of cyclohexane has been studied, which occurs on the active surface of one of the metal oxides to cyclohexene, then the resulting cycloolefin diffuses to the acidic active center - aluminosilicate, where skeletal isomerization occurs and then the isomerized cycloolefin again returns to the active center of the surface of the catalytic system, where it is hydrogenated to …

Environmental Impacts Potential Of Natural Gas Production Through Life Cycle Assessment, Akmal Al Afghani, Mochamad Adhiraga Pratama, Astryd Viandila Dahlan

Journal of Materials Exploration and Findings

Life cycle assessment (LCA) is a methodology used to evaluate potential environmental impacts in various industry sectors, including the oil and gas industry to quantify the environmental impacts and determine the processes that have significant impacts along their production cycle. This environmental impact study adheres to ISO 14040:2016 and 14044:2017 standards, using the ReCiPe methodology within a gate-to-gate scope to analyze potential environmental impacts of 1 MMSCFD natural gas production. The impact categories analyzed in this study are Global Warming Potential (GWP), Particulate Matter Formation (PM), Ozone Formation (OF), and Terrestrial Acidification (TA). The results of this study identified several …

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Removing Ilmenite-Based Filter Cakes Using Hydrochloric Acid And Chelating Agent – Experimental Study, Jianping Su, Omar Mahmoud, Hisham A. Nasr-El-Din

Future Engineering Journal

Ilmenite is often used as a weighting agent in drilling fluids to increase the fluid density, but the formation of a filter cake on the borehole wall can impact cementing operations and reduce well productivity. To remove the filter cake, various techniques can be employed such as chemical treatments, mechanical methods, or a combination of both. The goal of this study is to evaluate the effectiveness of chemical removal of ilmenite-based filter cake using 7.5 wt.% hydrochloric acid (HCl) and hydroxyethyl ethylenediamine triacetic acid (HEDTA) – chelating agent. The filter cakes were generated using API filter press under harsh conditions …

Reasons Why Oil Reserves Remain Unproductive-A Case Study, Mohamed Al-Saho

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

By studying the production plans of some wells of Al Furat Petroleum Company, the researcher noticed that the rate of production increases to reach a peak and then falls back sharply. The deformation of the area around the well due to the decrease in the formation pressure (after production for a certain period) may have caused a change in the storage properties (porosity, permeability) and thus lower production rate. However, from the point of view of the geomechanics of the oil formation, which includes the study of the stress situation and its effect on the rock tissue, we will notice …

High-Octane Gasoline Production Processes Using Catalysts Containing Platinum, Dilnoza Mauletbayevna Ametova, Duysenbay Xojabayevich Abdikamalov, Edil Abilov

Karakalpak Scientific Journal

The catalytic reforming process is designed to increase the detonation resistance of gasolines and to obtain individual aromatic hydrocarbons, mainly benzene, toluene, xylenes - petrochemical feedstocks. It is important to obtain a cheap hydrogen-containing gas in the process for use in other hydrocatalytic processes. The importance of catalytic reforming processes in oil refining increased significantly in the 1990s. due to the need to produce unleaded high-octane gasoline

Overview On The Lebanese Environmental Governance System: Main Hazards In The Oil And Gaz Sector, Rami Harkous

BAU Journal - Science and Technology

Due to harsh environment and vulnerability of marine ecosystems, many challenges are faced regarding offshore oil and gas activities. Many steps are currently undertaken to overcome such challenges.

As Lebanon is inside the new oil and gas sector in its offshore region, plans should be made to address environmental challenges that may occur in this sector. The Lebanese environmental governance system meets international standards in various aspects but some gaps are addressed to manage such risks that may be encountered with oil and gas activities in the Lebanese offshore. This article ends by a fast run through environmental regulatory authority, …

Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei

Progress in Scale Modeling, an International Journal

A broad range of engineering applications involves helical flow of non-Newtonian fluids between two eccentric cylinders. These applications often require estimation of the frictional pressure losses along the axes of the cylinders. Laboratory flow loops are commonly used to study the flow characteristics at smaller scales of investigation. This study uses the laws of similarity and dimensional analysis to obtain a set of scaling equations between the laboratory and prototype scales of the described annular flow. These equations are derived for four types of fluid rheology including Newtonian, power-law, Bingham-plastic, and yield power-law.

Results are expressed through a set of …

Methods Of Improving Complex Cleaning Of Sand Plugs In Khodjaobad Underground Gas Wells, Abdulaziz Murodov, Muhriddin Muydinov, Saidaziz Khabibullaev, Aziz Abidov

Technical science and innovation

The purpose of the study is to develop recommendations for improving the methods of cleaning complex sand plugs in wells of underground gas storage. To organize the correct and efficient use of underground gas storage, the bottom of wells must be kept clean. The article develops recommendations on the use of optimal methods for cleaning wells from complex sand jams on the example of Khujabad UGS. In addition, recommendations were developed for the operation of production wells in the horizons of the XX-XXI-XXII underground gas storage of Khujabad

Inventory Control Using Fuzzy Inference System And Adaptive Neuro Fuzzy Inference System Under Uncertain Conditions, Ali Abdulmajeed Ali, Arzaq Mohammed Ali Kulaib

Hadhramout University Journal of Natural & Applied Sciences

Supply chain management plays a significant role for running business efficiently, as it integrates management of materials and information flows between supply chain parties Fuzzy Inference System (FIS) and Adaptive Neuro Fuzzy inference system (ANFIS) are expert systems widely used to deal with imprecise and vague data. In this paper FIS and ANFIS are implemented to deal with the uncertainty regarding demand, lead time and inventory level in continuous inventory control system in order to obtain the optimal order quantity and reorder point. These two models are compared with Economic Order Quantity (EOQ) model at the different service level to …

A Modified Model For Prediction Of Gas Viscosities Of Yemeni Gas Fields, Khaled Saeed Ba-Jaalah, Abbas Mohamed Al-Khudaf, Amer Badr Binmerdhah

Hadhramout University Journal of Natural & Applied Sciences

Gas viscosity is an important physical property that controls and influences the flow of gas through porous media and pipe networks. An accurate gas viscosity model is essential for use with reservoir and process simulators. The present study is concerned with the evaluation of available gas viscosity correlations. The paper also presents new models for predicting gas viscosity for Yemeni gas reservoirs. The most often used different correlations for gas viscosity were assisted for Yemeni gas samples. The limitations of these correlations have been analyzed using Yemeni field data. Calculations are made using 120 experimental data points from Yemeni gas …

Well Oiled Machine: Classifying Machinery Performance Reductions Using Work Order Data, Jacob Brionez, Amber Burnett, Cho Kim, Scott M. Whitney, Thomas N. Anderson, Sumeet Treehan

SMU Data Science Review

Work Order (WO) data from System Applications and Products in Data Processing (SAP) software contains valuable information about what WOs intend to accomplish. Using SAP work order data, with time-series machinery sensor data combined into the same dataset, provides an opportunity to optimize prediction models to increase performance. Ideally, WO data can be utilized to help predict machinery's anticipated performance and can help prioritize a WO among others based on the anticipated machinery performance. It is possible to identify anomalies in pump sensor data using the Isolation Forest algorithm as the method for anomaly detection. The relationship between the sensor …

An Application Of Box-Jenkins Approach In Forecasting Nigerian Crude Oil Prices., Bashir Umar Faruk

Bullion

Nigerian government has been adopting Moving Average (MA) method in pegging crude oil price benchmark. However, large discrepancy between the projected oil price benchmark and the actual international crude oil prices is observed over time. Therefore, the main objective of this research is to investigate whether Box-Jenkins approach could provide a lasting solution to the problem of inefficient oil price forecast in the Nigerian budgeting process. In our quest for an appropriate oil benchmark, monthly bonny light crude oil prices for the period of April 1986 to December 2015 are used.

Separation Of The Petroleum System, Ali Ibrahim Neamah

The Hilltop Review

This study discusses the overall process of crude oil separation as well as the necessary equipment used in the process. Also discussed and analyzed are potential issues seen in the crude oil extraction process. Reasons why these operation problems may occur are analyzed as well as treatment options for such occurring issues are discussed for employees and students alike. This research is based off of personal involvement at the Nasiriyah Degassing Station located in Dhi Qar, Iraq.

An Economic Analysis Of Small-Scale Biodiesel Production: Implementation Of Ethyl Ester Production In A Job Shop Setting, Scott Haase, Benjamin Craig

Journal of Undergraduate Research at Minnesota State University, Mankato

Biodiesel is becoming a demanded consumer automotive alternative fuel used in diesel vehicles today. An emerging trend is toward small-scale biodiesel production performed by the final consumer. A limited source of commercially available production systems exists and has resulted in many systems being designed and built by the user. Preliminary research conducted by the authors has shown biodiesel to be the least-cost alternative to petroleum diesel after as few as 8 months of system use. This study examines the economic viability of building and producing biodiesel using a small-scale production system versus buying consumer petroleum diesel. During production, measurements were …

A Framework For Oil Price Benchmark Determination: Lessons For Nigeria, Taiwo H. Sanni, Bassey D. Akpan

Bullion

The main thrust of this paper is to draw lessons of experience from other selected oil producing countries. the outcome of the study is expected to help in strengthening Nigeria's oil price framework in line with international best practice. Section 2 dwells on the theoretical and literature review on oil based fiscal rule, while section 3 presents the framework for oil price benchmark determination and section 4 examines those factors capable of stimulating determination of oil price benchmark, lastly section 5 discusses some lessons of experience from Nigeria and then the conclusion.

Fuel Subsidy And Other Unproductive Public Expenditures Removal: A Pragmatic Approach To Restructure And Transform The Nigerian Economy, Lawrence O. Akinboyo

Bullion

While the short term measures to reduce recurrent expenditure are necessary conditions for fiscal sustainability, the long term imperative is to increase revenue. Thus, efforts should be made by the fiscal authorities in Nigeria to pursue the policy of balancing of expenditure with revenue improvements. The issues of the underperformance of the capital budget should be reversed before savings from cuts in recurrent expenditure can be diverted to the financing of capital expenditure. From the analysis, we say that removal of fuel subsidy would no doubt have some social and economic hardship on the people in the short run, However, …

Petroleum Industry Linkages And Nigeria's Economic Development, Chinyere U. Nwolisa, Chinyelu N. Ugoji

Bullion

Nigeria, Africa's most populous country and potentially its largest economy, has witnessed decades of dictatorship and misrule. Accompanying this misrule are severe economic problems of an unprecedented magnitude. This paper intends to add further clues to the solution for this national developmental puzzle. The remaining part of the paper is arranged thus: Part 2 presents an overview of the Nigerian Petroleum industry while the part 3 looks at the literature of economic development the country appears to be executing. Parl4 discusses the various linkages the Petroleum industry offers visa-vis Nigeria's exploration of their potentials. The penultimate part will offer some …

Imperative Of National Savings: A Case For Adoption Of Appropriate Benchmark Price For Crude Oil., Moses F. Otu

Bullion

Budgeting involves the design of plans that aligns expected financial resources and expenditure to accomplish specific national goals and objectives. It is in this regard that this paper provides a simple framework for deriving an acceptable bench-mark price for crude oil for budgeting purposes. This is aimed at enabling the elimination of subjectivity in budgeting process and promote understanding between all the stakeholders in order to fast track the process of passage of the appropriation bill. Following a brief introduction, the paper examines the need for national saving fund and constitutional provisions for national savings. Section three focuses on the …

Institutional And Other Constraints To Non-Oil Exports., R. O. Madaki

Bullion

This paper examines the non-oil exports sector in Nigeria which had witnessed a lacklustre performance despite the several statements of government's interest in export-biased growth strategy and the establishment of several export facilitating institutions. The paper further observes that a major problem with Nigeria's non-oil export sector is that it is not predicated on the design and implementation of appropriate and coherent economic policies as there is no clear export promotion blue print in Nigeria. Consequently, the sector is facing a number of institutional and other domestic and external problems. The remaining part of the paper briefly highlight some of …

Development In The Petroleum Sub-Sector And Their Impacts On Nigerian Economy., I. P. Ojinnaka

Bullion

The development of the petroleum industry has had both negative and positive impacts on the Nigerian economy. Two schools of thought can be examined. First, that positive impacts outweigh the negative, and secondly, the inverse. The paper will examined the impacts and analyzed the positive ones. From the approach of the study it is clear that the petroleum industry has had both negative and positive impacts on the Nigerian economy. Nigeria without petroleum could be like any other country without oil or gas, that is, import dependent. However, Nigeria with oil is the best thing that could have happened to …

Simplifying Lubricants For Farm Machinery, R A. Platt

Journal of the Department of Agriculture, Western Australia, Series 4

All moving parts on machinery needs lubrication. With the rapid development in farm machinery and its attendant sophistifications, the stresses imposed on the lubricants have also increased.

This article looks at some of the changes in requirements and developments in lubricants available.

Umr Journal: Alaska -- Its Mineral Potentials And Environmental Challenges, University Of Missouri--Rolla

UMR Journal -- V. H. McNutt Colloquium Series

No abstract provided.