Petroleum Engineering Commons^™

Vibro-Seismic Approach For Remediation Of Near-Wellbore Damage, Mounira Ahmed Abdallah

Theses and Dissertations

The research highlights the importance of vibro-seismic technology in the oil and gas industry. The primary objective of this study is to demonstrate how the vibro-seismic method enhances formation properties which are porosity, and permeability. Ultimately, this will lead to improved productivity and its application to remove the wellbore damage.

The research discusses whether or not the formation properties will be enhanced by the optimized acoustic vibration formation parameters. The thesis details laboratory experiments on core plugs, and four key findings are presented. The experimental work first showed that the use of the proper and optimum parameters enhanced the porosity …

Investigations Of Carbon Dioxide Storage In Low-Temperature Reservoirs For Non-Leaking Storage, Md Nahin Mahmood

Doctoral Dissertations

Carbon dioxide (CO₂) injection into subsea or low-temperature water zones has emerged as a promising strategy for long-term, non-leaking CO₂ storage through the formation of solid hydrates. This research investigates CO₂ injection into Berea sandstone cores saturated with water under simulated subsea conditions, focusing on hydrate formation behavior across varying temperatures, pressures, and injection flow rates. Experimental results demonstrate that CO₂ hydrate formation under dynamic (flowing) conditions occurs at significantly higher pressure compared to static conditions reported previously. At temperatures ranging from 0 °C to 5 °C, dynamic hydrate formation pressures were observed to be approximately double. This can be …

Geological Carbon Storage In Deep, Low Permeable Shale Reservoirs: Insights From The Haynesville Formation, Louisiana, Himakshi Goswami

Masters Theses

As global initiatives to mitigate greenhouse gas emissions intensify, depleted unconventional shale gas formations have emerged as critical candidates for large-scale geological carbon storage (GCS). This study investigates the feasibility, dynamic trapping mechanisms, and operational optimization of CO₂ sequestration in deep, low-permeability shale reservoirs, using the Upper Jurassic Haynesville Shale in northwest Louisiana as a comprehensive case study. Compositional reservoir simulation (CMG GEM 2021.10) was performed using the SPE Haynesville dataset, with CO₂ injected at a rate of 10,000 ft³/day across single and multiple depth intervals spanning 11,290–11,314 feet. Results demonstrate that multi-depth injection significantly improves residual trapping, reduces buoyancy-driven …

Mitigating Surfactant-Gas Interactions In Associated Gas Reservoirs: A Simulation And Machine Learning Guided Approach, Francis Dela Nuetor

Masters Theses

Surfactant flooding is a promising chemical enhanced oil recovery (EOR) method for mobilizing residual oil through interfacial tension reduction and wettability alteration. However, its performance in associated-gas reservoirs can be limited by salinity, gas composition, surfactant adsorption, and possible chemical instability. This study investigates the effect of salinity on surfactant flooding efficiency using an integrated reservoir simulation and machine learning workflow. A synthetic three-dimensional reservoir model was developed in ECLIPSE using a 10 × 10 × 3 Cartesian grid to simulate surfactant flooding over a 300-day production period under salinity conditions ranging from 100 to 50,000 ppm. Key outputs, including …

Optimizing Co₂ Wag Flooding Parameters For Enhanced Oil Recovery And Formation Damage Control In Asphaltene Reservoirs Using Soft Experimentation, Derrick Amoah Oladele

Masters Theses

CO₂ Water Alternating Gas flooding has become an important enhanced oil recovery process in increasing oil production in medium to heavy oil reservoirs. However, CO₂ injections have the potential to cause asphaltene destabilization, leading to precipitation, deposition, and pore plugging. This study evaluated and optimized the effect of CO₂ flooding parameters to maximize oil recovery and minimized formation damage. Eclipse 300 compositional reservoir simulator was used to assess the effect of CO₂ Water Alternating Gas (WAG) Injection Rate, WAG Ratio, and CO₂ Water Alternating Gas (WAG) Injection Pressure on the reservoir. Predictive models for Cumulative Oil Production (FOPT) and Asphaltene …

Gas Lift Valve Operation Under Elevated Pressure And Temperature Conditions, Pedro O. De Melo Flores

LSU Master's Theses

Gas lift valves are critical components in artificial lift systems, and their performance directly influences well unloading efficiency and long-term production. Current industry models used to correct valve opening and closing pressure for temperature rely on assumptions that have not been extensively validated against experimental data. This study experimentally investigates the opening and closing behavior of injection pressure-operated (IPO) gas lift valves under controlled elevated-temperature conditions. A load rate test bench was modified to include a heating system capable of maintaining valve temperatures up to 220°F. Five gas lift valve designs from multiple manufacturers were tested over a range of …

Isolated Bacillus Licheniformis Sp01 From Daqing Oilfield In Reducing Chromium(Iii) Crosslinked Polymer Residue And Enhancing Oil Recovery, Xiao Hui

Student Works (2020-2029)

After polymer gel formation, the residual partially hydrolyzed polyacrylamide (HPAM) and the crosslinker (Cr3+) caused plugging and decreased oil recovery. Microorganisms can degrade HPAM to address the issues, but Cr³⁺ inhibits the process and reduces oil recovery. This study explores the underexamined biodegradation of HPAM and improved oil recovery in the presence of Cr³⁺, offering new perspectives for microbial enhanced oil recovery (MEOR) after polymer gel formation. HPAM and crude oil were innovatively used as the sole nitrogen(N) and carbon(C) sources to isolate the best-growing strain from Daqing Oilfield produced water, identified as Bacillus licheniformis SP01. The oil displacement potential …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Optimization Of Carbon Capture And Sequestration In The Tri-State Hub West Virginia, Ohio, And Pennsylvania, Saif Abdullah Saif Al-Nabhani

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon Capture and sequestration (CCS) is a critical way for the decarbonization of power and industrial sectors. The Tri-State area between West Virgina, Ohio and Pennsylvania are a diverse region with various CO₂ sources, deep saline, depleted reservoirs, pipeline network, and the midstream infrastructure that makes it possible for Captured CO₂ to be safely and economically moved and stored over long periods of time. This project addresses the need for an integrated optimization framework that includes CO₂ sources to potential storing sites using a transportation network design and a subsurface model that secures storage and minimizes leakage risk.

The model …

Deep Learning-Based Co-Current Upward Gas-Liquid Two-Phase Flow Regime Identification In An Annular Conduit, Joshua Robert Macomber

Graduate Theses, Dissertations, and Problem Reports (ETD)

Flow regime identification in co-current upward gas-liquid flow through annular conduits remains a significant challenge in petroleum engineering, with major safety and operational implications. It is also important across industries involving the transport of multiphase fluids. Misidentifying flow regimes can introduce major operational risk, yet regime boundaries in annular gas-liquid flow are often visually complex and context dependent.

The objective of this study was to evaluate the utility of convolutional neural network (CNN) classifiers for flow regime identification. The CNN was trained using annular flow image dataset published by Texas A&M University. The dataset consists of approximately 947 RGB images …

Utilizing Coal For Mesophase Pitch-Based Carbon Fiber Production: Precursors, Processes, And Progress, Christina M. Thompson

Theses and Dissertations--Chemistry

Graphitic materials possess unique properties due to the unique combination of layered crystalline structure and carbon’s low atomic weight. High performance carbon fiber is one such example, displaying exceptional strength-to-weight ratios, stiffness, and thermal and chemical resistance. These properties render high performance carbon fiber a critical structural reinforcement material in the manufacture of composites across various industries, such as for automotive and aerospace applications. However, balancing fiber performance with precursor and processing costs remains a challenge. As alternative carbonaceous feedstocks are explored, coal has gained interest for utilization in graphitic products as a relatively abundant and low-cost source of aromatic …

Core-Scale Study Of Miscible Co2 Foam–Oil Interactions, Kuvonchbek Abdirakhmonov

Theses

Foam is currently the most effective means for gas mobility control in a variety of geo-energy applications, including enhanced oil recovery (EOR), carbon capture, utilization and storage (CCUS), and aquifer/soil remediation. This study investigates the mobility control of miscible CO₂ foam in the presence of oil.

The primary objective is to quantify the impact of oil on CO₂ foam behavior under miscible conditions, specifically examining foam stability, strength, and flow regimes as influenced by oil composition and reservoir permeability. While most oils destabilize foam, few studies explore the coarsening mechanisms of CO₂ foam in the presence of miscible oils, which …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Investigation Of Co-Current And Counter-Current Multiphase Flow In Upstream Drilling And Production Applications, Hazem Fleifel

LSU Doctoral Dissertations

In the domain of upstream Petroleum Engineering, the dynamics of co-current and counter-current multiphase flows present huge challenges, significantly impacting the efficiency of associated processes. This study investigates two specific applications concerning these flow behaviors, involving both laboratory experiments and transient computer simulations. This work investigates two distinct well control and production enhancement processes, involving multiphase flow dynamics: the bullheading kill procedure and liquid-assisted gas lift (LAGL).

The first topic (Topic 1) explores the bullheading process, a type of well control methods, by challenging the traditional understanding that gas removal efficiency increases monotonically with injection pump flow rate. Through 1D …

Quantifying Wellbore Effects During Co2 Sequestration In A Saline Aquifer, Uzoma Johnpaul Ajugwe

USF Tampa Graduate Theses and Dissertations

Carbon capture and storage (CCS) is a strategy for mitigating climate change by reducing greenhouse gas emissions from large stationary sources like fossil-fuel-fired power stations. One method of CCS involves carbon dioxide (CO2) sequestration in deep saline aquifers, where supercritical CO2 is injected into an aquifer. The success of such projects depends on accurate predictions of CO2 behavior within the subsurface, which are obtained through numerical simulations.

TOUGHREACT, a renowned simulation tool, models subsurface fluid flow, geochemical interactions, and solute transport, providing insights into the feasibility of CO2 sequestration projects. A critical aspect of these simulations is the apportioning of …

Investigation And Prediction Of Excessive Water Production In Bottom Water-Drive Naturally Fractured Reservoirs Using Machine And Deep Learning, Sami Abderraouf Belkhir

Theses

Naturally Fractured Reservoirs (NFRs) are characterized by dual-porosity and dual-permeability systems, posing significant challenges in managing water production due to highly conductive fracture networks that facilitate rapid water migration from bottom aquifers, often bypassing oil stored in the matrix, thus resulting in early water breakthrough and water channeling phenomena. The main objective of this thesis is to develop and validate deep learning and machine learning models to predict water production, water breakthrough time (tbt), and ultimate water cut (WCult) in NFRs, thereby enabling more effective reservoir management strategies. This work also aims to evaluate the sensitivity of water behavior to …

Data-Driven Machine Learning Applications For Predictive Modeling Of Petrochemical And Ecofriendly Systems, Noora Saleh Al Mansoori

Theses

Traditional experimental approaches in industrial processes, such as Fourier Transform Infrared Spectroscopy (FTIR) spectroscopy, thermogravimetric analysis (TGA), and well-drilling operations, are often constrained by time, cost, and operational limitations. This research explores the application of data-driven Machine Learning (ML)-based predictive modeling to improve efficiency and reduce dependency on resource-intensive experimentation. The study develops ML models for three distinct processes: FTIR intensity prediction of bitumen thermal cracking products, thermal degradation of Medium-Density Fibreboard (MDF) using TGA data, and Rate of Penetration (ROP) prediction in petrochemical industry. Six algorithms: Linear Regression (LinReg), Partial Least Squares Regression (PLSR), Support Vector Regression (SVR), Gradient …

Utilizing Date Fruit Pomace As A Corrosion Green Inhibitor For Non Ferrous Alloys, Sardor Rustam Odilov

Theses

This thesis explores a novel green corrosion inhibitor derived from date fruit pomace extract (DFPE) for the protection of aluminum alloy 3003 in highly corrosive environments, specifically hydrochloric acid (HCl) and natural seawater. The central aim is to promote the sustainable reuse of agro-waste as an effective and eco-friendly alternative to conventional toxic inhibitors, aligning with environmental and industrial safety goals.

A comprehensive methodology was employed, including Soxhlet extraction (using both non-polar n-hexane and polar methanol-water solvents), rotary evaporation, and FTIR analysis to identify the active functional groups responsible for inhibition. Corrosion behavior was systematically evaluated using both mechanical (weight …

Experimental Evaluation Of Novel Nano Polymer Hybrid Enhanced Oil Recovery In Carbonate Reservoir, Altamish Ahmed Pakeer

Theses

Innovative enhanced oil recovery (EOR) strategies are needed to unlock additional reserves in heterogeneous, oil-wet carbonate reservoirs. This study evaluates hybrid nano-polymer flooding by integrating silica nanoparticles (SiO₂) and single-walled carbon nanotubes (CNT) with novel HPAM polymers (Sav10 and Sav10 VHM) to optimize wettability alteration, rheological parameters, and recovery mechanisms.

A comprehensive experimental approach was employed, where rheological tests assessed viscosity enhancement under varying shear conditions, and wettability alteration was quantified via contact angle measurements using HPAM-SiO₂, HPAM-CNT, Sav10 VHM-SiO₂, and Sav10 VHM-CNT systems. Core floods were performed in three consecutive phases; waterflooding (baseline), standalone nanoparticle flooding, and hybrid nano-polymer …

Rheological, Interfacial, And Filtration Behavior Of Lignocellulosic Nanomaterials In Suspension And Emulsion Drilling Fluids, Meen Sung Koo

LSU Doctoral Dissertations

In recent years, the rheological aspects of suspensions/emulsions applied by cellulose nanomaterials (CNMs) have been gained considerable interests due to high gel-forming properties ascribed by hydrophilicity, crystallinity, ease functionalization, and high aspect ratio. Introducing residual lignin in CNMs (LCNMs) seemed to be capable of achieving various advantages in the application of CNMs ascribed by hydrophobicity, binding effects, and abundant aromatic groups derived from complexity of lignin. This dissertation dedicates to the characterizations of (L)CNMs, and rheological properties of (L)CNMs applied fluids (i.e., suspension and emulsion). In the suspension system, the presence of lignin in LCNMs decreased gel strength, viscosity, and …

Determining The Limitations Of Class F Fly Ash Compared To Class G Cement In Hydrocarbon Wells Application, Youssef Helmy

Theses and Dissertations

Cement is a material commonly used in multiple applications in different industries. Among the industries that uses cement is the oil and gas industry. API (American Petroleum Institute) Class G cement that is the most incorporated form of cement used in the cementation of oil and gas wells to provide several forms of protection and stabilization for the casings. However, Class G cement is contested in terms of efficiency, costs, and environmental awareness against Class F fly ash geopolymers by researchers. This research aims to explore the potential limitations that fly ash geopolymer might have for its use in the …

Experimental Investigation Of Surfactant Impact On Surfactant-Oil-Brine System For Surfactant Enhanced Oil Recovery, Chananpat Worpattanaluk

Chulalongkorn University Theses and Dissertations (Chula ETD)

Enhanced Oil Recovery (EOR) is a vital technique for improving hydrocarbon extraction efficiency from mature or low-production reservoirs. Among various EOR methods, chemical flooding, particularly surfactant-based EOR, has gained attention due to its ability to reduce interfacial tension (IFT), to alter rock wettability, and to mobilize trapped oil. However, the performance of surfactant systems is highly sensitive to reservoir salinity, temperature, and rock-fluid interactions, leading to surfactant precipitation, adsorption losses, and interfacial tension reduction. Therefore, understanding the effects of salinity, surfactant concentration, and the role of scale inhibitors on the physicochemical stability of surfactant-oil-brine systems is essential for designing robust …

Evaluating Co2 Storage Criteria : Focusing On Thailand's Petroleum Basins For Carbon Storage, Paul Tivere Benjamin

Chulalongkorn University Theses and Dissertations (Chula ETD)

Anthropogenic carbon dioxide (CO2) emissions from large point sources remain central to Thailand’s climate challenge, and geological carbon capture and storage (CCS) is now included in national mitigation plans. However, Thailand still lacks a transparent way to compare candidate saline aquifers and petroleum basins in terms of storage performance, containment, and socio-economic conditions, while allowing for uneven data quality. This thesis develops a Thailand-specific, two-stage framework that combines threshold-based screening with a multi-criteria ranking framework based on the Analytic Hierarchy Process (AHP) and Data Confidence Scores (DCS). Twenty-one criteria in three groups (capacity and injectivity, containment, and socio-economic constraints) were …

Simulation On Hydrogen Production From Mae-Moh Lignite Coal Gasification, Pitatchai Arunwong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Hydrogen energy has attracted significant attention due to its cleanliness, efficiency, and sustainability. Gasification is considered one of the most promising thermochemical routes to convert coal into high-quality syngas, which can subsequently be utilized for hydrogen production. Mae-Moh lignite, a low-rank coal with low carbon content and high moisture and volatile matter, is selected as the feedstock for this study. This research aims to develop a comprehensive simulation model of a hydrogen production process, integrating gasification, water-gas shift (WGS), acid gas removal, and hydrogen purification using the software simulator. The model predicts hydrogen product gas composition from Mae-Moh lignite under …

Transport And Plugging Behavior Of Co2-Resistant Preformed Particle Gels In High Conductive Channels For Conformance Control, Adel Alotibi

Doctoral Dissertations

"Improving oil recovery is essential with rising global oil demand and declining production in mature fields. CO₂ flooding has been widely applied as a major Enhanced Oil Recovery (EOR) method due to its effectiveness in boosting oil recovery while enabling safe carbon storage in the subsurface. However, in fractured and highly heterogeneous reservoirs, CO₂ often flows through paths of least resistance, leading to early breakthrough or quick excessive CO₂ production and leaving substantial oil in unswept zones or areas. Traditional in-situ polymer gels have been applied to control CO₂ flooding conformance, their performance has been varied, …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Physics-Informed Heterogeneous Spatiotemporal Graph Neural Network For Reservoir Simulation, Ahmed A.M.A. Abdullah

LSU Master's Theses

Reservoir simulation is the state-of-the-art method for predicting the flow of petroleum reservoir fluids in porous media. It provides an accurate and unbiased prediction of the performance of petroleum reservoirs under different operating conditions. Despite its advantages, reservoir simulation is computationally expensive; with typical full-field simulation models running for several hours. This limitation is worsened when simulating reservoirs with several equations for each cell, such as multiphysics or compositional reservoir simulation. The goal of this research is to provide a fast and accurate spatiotemporal machine-learning model that incorporates discretized governing mass balance equations for training. To achieve this, we propose …

Application Of Digital Rock Physics And Machine Learning To Improve The Understanding Of Fluid Flow Behavior Through Porous Media, Md Irfan Khan

Mechanical Engineering Theses

Accurately estimating reservoir rock properties and understanding capillary trapping mechanisms are crucial for fluid storage and flow modeling in porous media, particularly for applications such as carbon dioxide sequestration (CCS) and underground hydrogen storage (UHS). This thesis presents a comprehensive workflow that combines machine learning techniques and pore-network modeling approach to predict petrophysical properties and assess the impact of microscopic pore structures on capillary trapping. In the first part, a convolutional neural network (CNN) framework is used to predict rock properties—such as porosity, throat area, and pore surface area—from micro-computed tomography (micro-CT) X-ray images. It has been observed that incorporating …

A Coarse-Grained Molecular Dynamics Study Of Gas Hydrate Formation And Dissociation, Meisam Adibifard

LSU Doctoral Dissertations

The study of gas hydrates has increased significantly over the last two decades because of their potential application in energy storage, production and transportation, water desalination, refrigeration, gas separation, etc. There is a significant interest in commercially developing natural gas hydrates because the energy content of methane hydrate reservoirs (MHRs) is at least twice that of all conventional fossil fuels combined. Additionally, due to the higher storage capacity of hydrates, it is proposed to sequester CO₂ in the form of CO₂ hydrate, thereby reducing the amount of greenhouse gases. Hence, hydrates offer a dual solution to two of …

Valorization Of Date Palm Waste For The Isolation, Characterization, And Surface Chemistry Modification Of Nanocellulose, Mohsin Raza

Dissertations

This dissertation focuses on the utilization of date palm waste, a lignocellulosic material, as a source for the extraction of nanocellulose (NC), a versatile biopolymer with applications in biodegradable composites, bioplastics, and food packaging. Conventional methods of NC production using mineral acids such as sulphuric and hydrochloric acid are reaching their limits of toxicity, so more environmentally friendly alternatives such as ionic liquids (ILs) are being explored. The research focuses on the characterization of different date palm wastes to evaluate their α−cellulose content, lignocellulosic character, and thermal stability. By comparing extraction methods with mineral acids and ILs, the study evaluates …