Petroleum Engineering Commons^™

Vibro-Seismic Approach For Remediation Of Near-Wellbore Damage, Mounira Ahmed Abdallah

Theses and Dissertations

The research highlights the importance of vibro-seismic technology in the oil and gas industry. The primary objective of this study is to demonstrate how the vibro-seismic method enhances formation properties which are porosity, and permeability. Ultimately, this will lead to improved productivity and its application to remove the wellbore damage.

The research discusses whether or not the formation properties will be enhanced by the optimized acoustic vibration formation parameters. The thesis details laboratory experiments on core plugs, and four key findings are presented. The experimental work first showed that the use of the proper and optimum parameters enhanced the porosity …

Core-Scale Study Of Miscible Co2 Foam–Oil Interactions, Kuvonchbek Abdirakhmonov

Theses

Foam is currently the most effective means for gas mobility control in a variety of geo-energy applications, including enhanced oil recovery (EOR), carbon capture, utilization and storage (CCUS), and aquifer/soil remediation. This study investigates the mobility control of miscible CO₂ foam in the presence of oil.

The primary objective is to quantify the impact of oil on CO₂ foam behavior under miscible conditions, specifically examining foam stability, strength, and flow regimes as influenced by oil composition and reservoir permeability. While most oils destabilize foam, few studies explore the coarsening mechanisms of CO₂ foam in the presence of miscible oils, which …

Effects Of Wettability, Lithology, And Permeability On The Optimum Slug Size Of Low Salinity Water Flooding In Carbonates: An Experimental Approach, Hala Khaled Hasan Alshadafan

Theses

Low salinity water flooding has attracted academic and industry communities due to its relatively simple and applicable technology. One of the drawbacks of applying the IOR/EOR technique is the lack of the availability of low salinity water in large quantities at the reasonable cost required for a technically and environmentally successful project. To overcome this problem, the industry proposed to use produced water/sea water after dilution, and reverse osmosis filter technology to achieve the required salinity. Both techniques are quite costly and might hinder the project's economic success. Low salinity water as slug size followed by high salinity water was …

Experimental And Modeling Study Of The Effects Of Sealing Structures In Lost Circulation Prevention And Remediation, Mingzheng Yang

LSU Doctoral Dissertations

Drilling fluid lost circulation leads to non-productive time and increases the overall well cost. In general, wellbore strengthening and lost circulation control are achieved by creating effective sealing structures to inhibit fluid flow through loss conduits such as formation fractures. This research aims at better understanding the effects of sealing structures in fluid loss prevention and remediation, and providing useful references to effectively establishing filtercakes on the wellbore and plugs in the fracture.

Recent research on wellbore strengthening disclosed the critical role of filtercake in sealing microfractures during the initial stages of fracture initiation and propagation. The performance of a …

Investigation Of Tracer-Surfactant-Foam Processes In Shallow Subsurface Environmental Remediation: History-Matching And Performance Prediction, Hazem Fleifel

LSU Master's Theses

In-situ subsurface remediation has been widely used as an efficient means of cleaning up non-aqueous phase liquid (NAPL) from contaminated soils and aquifer. The use of tracer, surfactant, and foam are often considered to keep track of the propagation of injected fluids in the medium, dissolve and mobilize contaminants trapped by capillary forces, and overcome the level of heterogeneity and improve displacement and sweep efficiencies.

This study shows an actual remediation process to reduce NAPL within a military base in South Korea, by injecting tracer and surfactant solutions together for a duration of 10 days. The site consists of 5 …

Study Of Gas Production From Shale Reservoirs With Multi-Stage Hydraulic Fracturing Horizontal Well Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no …

A Petrophysical Evaluation For Permeability Of A Gas Reservoir In The Taranaki Basin, New Zealand, Musa Cetin

Dissertations, Master's Theses and Master's Reports

The goal of this study was to evaluate permeability and study the controls on permeability in a gas saturated formation. Conventional well logs, mineral identification crossplots and empirical models were applied to analyze different lithologic and diagenetic features and to examine the effect that these features may have on the reservoir. An unusual feature was observed, and required detailed examination: there existed (in two wells) five zones of lower resistivity (higher water saturation) above the gas-water contact. This is unexpected, as above that contact, the water is usually at irreducible water saturation. I conclude that the lower resistivity (the higher …

Modeling Of Gas Production From Shale Reservoirs Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas transport in unconventional shale strata is a multi-mechanism-coupling process that is different from the process observed in conventional reservoirs. In micro fractures which are inborn or induced by hydraulic stimulation, viscous flow dominates. And gas surface diffusion and gas desorption should be further considered in organic nano pores. Also, the Klinkenberg effect should be considered when dealing with the gas transport problem. In addition, following two factors can play significant roles under certain circumstances but have not received enough attention in previous models. During pressure depletion, gas viscosity will change with Knudsen number; and pore radius will increase when …

Multiscale Estimation Of Inertial Effects For Frac-Pack Completed Gas Reservoirs, Sultan Anbar

LSU Doctoral Dissertations

Accurate estimation of production from frac-pack completed gas wells requires reliable estimation of flow properties from reservoir rocks and proppants. This study is composed of three parts: core-scale, pore-scale and reservoir-scale analyses of this problem. In the core-scale analysis, simultaneous estimation of permeability, non-Darcy, and Klinkenberg coefficients of reservoir rock is conducted from steady-state and pulse-decay experiments. Confidence intervals of the estimated parameters are determined from the Bootstrap method. The duration of pulse-decay experiments has a large impact on confidence intervals; therefore, correlations are developed to estimate the experimental duration for both 1-tank and 2-tank set-ups from the core properties …

Pore-Scale Lattice Boltzmann Simulations Of Inertial Flows In Realistic Porous Media: A First Principle Analysis Of The Forchheimer Relationship, Chukwudi Paul Chukwudozie

LSU Master's Theses

With recent advances in the capabilities of high performance computing (HPC) platforms and the relatively simple representation of complex geometries of porous media, lattice Boltzmann method (LBM) has gained popularity as a means of solving fluid flow and transport problems. In this work, LBM was used to obtain flow parameters of porous media, study the behavior of these parameters at varying flow conditions and quantify the effect of roughness on the parameters by relating the volume averaged flow simulation results to Darcy and Forchheimer equations respectively. To validate the method, flow was simulated on regular and random sphere arrays in …