Petroleum Engineering Commons^™

Experimental Evaluation Of Novel Nano Polymer Hybrid Enhanced Oil Recovery In Carbonate Reservoir, Altamish Ahmed Pakeer

Theses

Innovative enhanced oil recovery (EOR) strategies are needed to unlock additional reserves in heterogeneous, oil-wet carbonate reservoirs. This study evaluates hybrid nano-polymer flooding by integrating silica nanoparticles (SiO₂) and single-walled carbon nanotubes (CNT) with novel HPAM polymers (Sav10 and Sav10 VHM) to optimize wettability alteration, rheological parameters, and recovery mechanisms.

A comprehensive experimental approach was employed, where rheological tests assessed viscosity enhancement under varying shear conditions, and wettability alteration was quantified via contact angle measurements using HPAM-SiO₂, HPAM-CNT, Sav10 VHM-SiO₂, and Sav10 VHM-CNT systems. Core floods were performed in three consecutive phases; waterflooding (baseline), standalone nanoparticle flooding, and hybrid nano-polymer …

Investigation Of The Transport And Plugging Behavior Of Preformed Particle Gels (Ppgs) In Fractures For Conformance Control In Carbonate Reservoirs, Abdulaziz A. Almakimi

Doctoral Dissertations

This study aims to systematically evaluate the performance of preformed particle gels (PPGs) in fractured carbonates mainly through a series of core flooding experiments. Carbonate reservoirs exhibit unique features of heterogeneity and pore geometry, while (PPGs) are known for their plugging efficiency, deformability, and dehydratable nature. The main goal of gel injection in fractured reservoirs is to place a gel pack appropriately into the fracture, diverting injected fluid to the oil-bearing matrix and reducing excessive water production. However, considerable dehydration of (PPGs) is possible at the adjacent matrix and within the fracture, which could lead to a filter-cake formation and/or …

Sealant Injectivity Through Void Space Conduits To Assess Remediation Of Well Cement Failure, Mohammed Alkhamis, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The primary cement of oil and gas wells is prone to fail under downhole conditions. Thus, a remedial operation must be conducted to restore the wellbore integrity and provides zonal isolation. Many types of materials are currently used and/or have the potential to be employed in wellbore integrity applications, including, but not limited to, conventional Portland cement, microfine and ultrafine cement, thermoset materials, and thermoplastic materials. In this study, several types of materials were selected for evaluation: (1) conventional Portland cement, which is the most widely used in remedial operations in the petroleum industry, (2) polymer resin, which is one …

A Review Of Field Oil-Production Response Of Injection-Well Gel Treatments, Munqith Aldhaheri, Mingzhen Wei, Na Zhang, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As life-span extenders, bulk gels have been widely applied to rejuvenate oil production from uneconomic producers in mature oil fields by improving the sweep efficiency of improved-oil-recovery (IOR)/enhanced-oil-recovery (EOR) floods. This paper presents a comprehensive review of the responses of injection-well gel treatments implemented between 1985 and 2014. The survey includes 61 field projects compiled from SPE papers and US Department of Energy reports. Seven parameters related to the oil-production response were evaluated according to the reservoir lithology, formation type, and recovery process, using univariate analysis and stacked histograms. The interquartile-range (IQR) method was used to detect the underperforming and …

Surface Tension, Interfacial Tension And Phase Behavior: Interactions Of Surfactant/Polymer Solutions With Crude Oil, Michael A. Steinerd, Jaeyub Chung, Bryan W. Boudouris, Nathan C. Schultheiss, Elias I. Franses

The Summer Undergraduate Research Fellowship (SURF) Symposium

Advanced oil recovery techniques, beyond primary and secondary recovery, are required in order to produce additional oil in existing reservoir rock. Here, we evaluated a combination of polymer and surfactant aqueous solutions, in order to generate a working fluid capable of achieving high-performance enhanced oil recovery (EOR). In this recovery process, surfactant is added to the water flooding mixture in order to lower the interfacial tension between the oil and the water. If the interfacial tension can be decreased by ~1,000-fold, then the aqueous solution can mobilize and displace the oil. Moreover, a polymer is added to the aqueous solution …

Data Analysis And Summary For Surfactant-Polymer Flooding Based On Oil Field Projects And Laboratory Data, Pratap D. Chauhan

Masters Theses

"Enhanced oil recovery screening is considered as an important first step towards evaluating a potential EOR technique for a candidate reservoir. A vast amount of research is continuously been conducted in EOR. Therefore, it is imperative to update the screening criteria regularly.

This study involves updating the screening criteria for surfactant polymer flooding for field projects dataset and laboratory dataset. Many of the screening criteria for surfactant-polymer flooding in the literature were achieved on the basis of data collected from the EOR surveys published biennially in Oil & Gas Journals. However, these datasets contain problems like missing data and inconsistent …

Semantic Model And Updated Screening Criteria For Polymer Flooding, Laila Dao Saleh

Doctoral Dissertations

"Enhanced oil recovery (EOR) processes produce oil that conventional methods leave behind, where interfacial forces, heavy oil viscosity, and reservoir heterogeneity make it difficult to produce. Many EOR methods are available but usually cannot be used at the same time for a candidate reservoir. Therefore, it is important to select the most appropriate EOR process from among the possible techniques. EOR screening criteria have been created using EOR datasets and serve as the first step to compare the suitability of each technique for a specific reservoir. Most of these datasets are based on field data collected from EOR surveys published …