Petroleum Engineering Commons^™

Vibro-Seismic Approach For Remediation Of Near-Wellbore Damage, Mounira Ahmed Abdallah

Theses and Dissertations

The research highlights the importance of vibro-seismic technology in the oil and gas industry. The primary objective of this study is to demonstrate how the vibro-seismic method enhances formation properties which are porosity, and permeability. Ultimately, this will lead to improved productivity and its application to remove the wellbore damage.

The research discusses whether or not the formation properties will be enhanced by the optimized acoustic vibration formation parameters. The thesis details laboratory experiments on core plugs, and four key findings are presented. The experimental work first showed that the use of the proper and optimum parameters enhanced the porosity …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Determining The Limitations Of Class F Fly Ash Compared To Class G Cement In Hydrocarbon Wells Application, Youssef Helmy

Theses and Dissertations

Cement is a material commonly used in multiple applications in different industries. Among the industries that uses cement is the oil and gas industry. API (American Petroleum Institute) Class G cement that is the most incorporated form of cement used in the cementation of oil and gas wells to provide several forms of protection and stabilization for the casings. However, Class G cement is contested in terms of efficiency, costs, and environmental awareness against Class F fly ash geopolymers by researchers. This research aims to explore the potential limitations that fly ash geopolymer might have for its use in the …

Investigation Of Cyclic Gaseous Solvent Injection For Enhanced Oil Recovery In Unconventional Formations, Samuel Asante Afari

Theses and Dissertations

Unconventional resources have been known to hold vast quantities of hydrocarbons. However, exploiting the oil and gas they hold was previously challenging due to their low permeabilities. Recent advances in horizontal well drilling and hydraulic fracturing have enabled oil and gas production from these reservoirs, leading to significant increases in energy supply to meet the growing energy demand. However, despite the relative technological success, considerable obstacles persist; oil production from unconventional wells often declines by more than 20% of their initial production rate within the first two years, leaving significant volumes of residual oil trapped in the formations. This overarching …

Experimental Study On Co2-Sensitive Polyacrylamide As Potential In-Situ Sealing Agent For Co2 Leakage Pathways In Geological Storage Sites, Iris Laihmen Quan Lopez

Theses and Dissertations

As the world pushes for ‘greener’ technologies and carbon neutrality, efforts have focused on creating novel ways to mitigate humankind’s carbon footprint. Carbon capture and storage (CCS) has become a prevalent technique that has proven to be an effective long-term method to safely relocate excess carbon dioxide (CO₂) into subsurface formations. However, CCS is a newer technique which requires constant monitoring due to potential leakage pathways present in CO₂ storage sites; therefore, a preventive approach to seal leakage pathways is recommended. This dissertation explores the potential of CO₂-sensitive polyacrylamide (CO₂-SPAM) as a novel …

Detecting The Leakage In The Pipeline System Through Flow Parameter Analysis, Hao Fu

Theses and Dissertations

The pipeline is an efficient way to transport oil and gas over long distances. However, leakage can occur when the pipes have been running for a long time. The leak of energy resources will cause economic loss in millions of dollars, pollute the local environment, and result in safety problems. Therefore, the technology of pipeline leak detection is very crucial during the energy transport process.

The goals of the research are to develop mathematical models based on experimental data and CFD simulation to detect single and multiple leaks in a pipeline and/or pipeline system. The new methods use daily recorded …

High-Temperature, High-Pressure Viscosities And Densities Of Toluene, Aaron J. Rowane

Theses and Dissertations

High-temperature, high-pressure (HTHP) conditions are exemplified in ultra-deep petroleum reservoirs and can be exhibited within diesel engines. Accurate pure component hydrocarbon data is essential in understanding the overall behavior of petroleum and diesel fuel at these conditions. The present study focuses on the HTHP properties of toluene since this hydrocarbon is frequently used to increase the octane rating of gasoline and toluene occurs naturally in crude oil. In this thesis experimental densities and viscosity are presented to 535 K and 300 MPa extending the database of toluene viscosity data to higher temperature than previous studies. The data is correlated to …

Design And Development Of A High-Temperature High-Pressure Rolling Ball Viscometer/Densimeter And Evaluation Of Star Polymer-Solvent Mixtures, Matthew Stanton Newkirk

Theses and Dissertations

Modern automotive applications such as transmission clutch plates, combustion chambers, diesel fuel injector tips, and axle gears and friction plates operate at temperatures that can exceed 250°C and pressures of 40,000 psia. Industrial practice is to add homopolymers and copolymers to base oils to modify bulk fluid viscosity and frictional properties for these demanding applications. However, designing polymeric additives for lubricants and predicting their performance is limited by the lack of available high-temperature high-pressure (HTHP) viscosity and density data needed to test contemporary lubricity models. Thus, a major objective of this thesis is the design, development, and commissioning of a …

Measurements And Modeling Of Hydrocarbon Mixture Fluid Properties Under Extreme Temperature And Pressure Conditions, Babatunde A. Bamgbade

Theses and Dissertations

Knowledge of thermodynamic fluid properties, such as density and phase behavior, is important for the design, operation, and safety of several processes including drilling, extraction, transportation, and separation that are required in the petroleum. The knowledge is even more critical at extreme temperature and pressure conditions as the search for more crude oil reserves lead to harsher conditions. Currently, there is dearth of experimental data at these conditions and as such, the predictive capability of the existing modeling tools are unproven. The objective of this research is to develop a fundamental understanding of the impact of molecular architecture on fluid …