Open Access. Powered by Scholars. Published by Universities.®

Petroleum Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 8 of 8

Full-Text Articles in Petroleum Engineering

Investigation Of Retention And Dehydration Of Preformed Particle Gel For Conformance Control In Fractured Carbonates, Abdulaziz A. Almakimi, Abdullah O. Almansour, Junchen Liu, Baojun Bai, Ibnelwaleed A. Hussein Jun 2025

Investigation Of Retention And Dehydration Of Preformed Particle Gel For Conformance Control In Fractured Carbonates, Abdulaziz A. Almakimi, Abdullah O. Almansour, Junchen Liu, Baojun Bai, Ibnelwaleed A. Hussein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gel (PPG) treatment has proved to be among the most effective methods to reduce excessive water production in fractured reservoirs. The blocking ability of PPGs to fractures or fracture-like features is highly dependent on injected gel properties and volume. Gel dehydration during extrusion through fracture is common and has a considerable effect on gel properties, transport, and plugging efficiency. As the gel particles propagate through the fracture, continuous dehydration is often associated and causes the gel to concentrate and require high-pressure gradients to move. Dehydration might be desirable to a certain limit because it can help to form …


The Effect Of Different Fracturing Fluids On The Productivity Of Multi-Staged Fractured Marcellus Shale Horizontal Wells, Vida Gyaubea Matey-Korley Jan 2023

The Effect Of Different Fracturing Fluids On The Productivity Of Multi-Staged Fractured Marcellus Shale Horizontal Wells, Vida Gyaubea Matey-Korley

Graduate Theses, Dissertations, and Problem Reports (ETD)

While hydraulic fracturing has undeniably improved the production from oil and gas reservoirs, this technology is not without limitations. The primary hurdles lie in the areas of proppant transport, fluid rheology, and stress management. Despite the extensive research conducted in this domain, there remains a considerable amount of work to be done for comprehensive solutions that account for the complex interactions among fracturing fluid, proppant distribution, and geomechanical conditions. Achieving this will then make room for a holistic and efficient hydraulic fracturing strategy.

This study addresses the above-mentioned problem by examining the impact of fluid type on proppant transport and …


Shale Softening Based On Pore Network And Laboratory Investigations, Di Zhang Aug 2021

Shale Softening Based On Pore Network And Laboratory Investigations, Di Zhang

Dissertations

This dissertation consists of two major parts: Firstly, experimental investigation of four major shale softening mechanisms and quantifications of structural parameters. Secondly, numerical simulations of nano-scale flow behaviors using the previous experiments determined parameters based on modified pore network modeling.

Hydraulic fracturing is widely applied to economical gas production from shale reservoirs. Still, the gradual swelling of the clay micro/nano-pores due to retained fluid from hydraulic fracturing causes a gradual reduction of gas production. Four different gas-bearing shale samples are investigated to quantify the expected shale swelling due to hydraulic fracturing. These shale samples are subject to heated deionized (DI) …


Stress-State And Injection-Rate Dependent Damage Processes During The Hydraulic Fracturing Of Granite, Gayani Sasendrika Gunarathna May 2020

Stress-State And Injection-Rate Dependent Damage Processes During The Hydraulic Fracturing Of Granite, Gayani Sasendrika Gunarathna

Dissertations

Hydraulic fracturing is a well-stimulation technique that is employed in field applications, such as enhanced geothermal systems (EGS) and shale oil/gas extraction. This research experimentally investigates the effect of the state of stress and injection rate on the hydraulic fracturing processes. In addition, a displacement discontinuity method (DDM) code, FROCK, is used to model the crack initiation and propagation in a granite specimen under hydraulic fracturing conditions. In order to conduct the experimental work, a test setup capable of applying a triaxial state of stress and water pressure inside pre-fabricated flaws cut in prismatic granite specimens is developed. Additionally, the …


Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos Jan 2016

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos

LSU Master's Theses

Hydraulic fracturing is recognized as the primary technique to achieve economic oil and gas production from low permeability reservoirs like shale and tight-sand formations. One of the main challenges facing the oil and gas industry is maintaining the proppant functionality in the subsurface where replacement of proppant is only possible by expensive refracturing operations. Proppant crushing and proppant embedment have posed challenges for sustainable production from stimulated wells especially in soft and deep formations like Haynesville Shales. Experimental measurements show the strong impact of proppant stress and proppant embedment on reducing fracture conductivity. In this work, we introduce a new …


Evaluating Completion Performance For Gas Wells In The Upper And The Lower Montney Formation, Canada, Omar Qasim Mohammed Jan 2016

Evaluating Completion Performance For Gas Wells In The Upper And The Lower Montney Formation, Canada, Omar Qasim Mohammed

Masters Theses

"Identifying the key drivers for success of multiple fractured horizontal wells is not straightforward, especially in unconventional reservoirs like the Montney. Al-Alwani et al. (2015) provided a statistical analysis of Montney completions based on publicly available data. They showed that for the entire well population, cumulative gas recovery per stage, declines as the number of completed stages increase. However, their statistical analysis did not differentiate between completions in the Upper/Middle/Lower Montney, and did not include perforation cluster data.

This work documents the statistical analysis of 296 cased-hole horizontal gas well completions reported in the Upper and the Lower Montney. The …


Application Of The Variational Fracture Model To Hydraulic Fracturing In Poroelastic Media, Chukwudi Chukwudozie Jan 2016

Application Of The Variational Fracture Model To Hydraulic Fracturing In Poroelastic Media, Chukwudi Chukwudozie

LSU Doctoral Dissertations

Hydraulic fracturing has persisted through the use of simple numerical models to describe fracture geometry and propagation. Field tests provide evidence of interaction and merging of multiple fractures, complex fracture geometry and propagation paths. These complicated behaviors suggest that the simple models are incapable of serving as predictive tools for treatment designs. In addition, other commonly used models are designed without considering poroelastic effects even though a propagating hydraulic fracture induces deformation of the surrounding porous media. A rigorous hydraulic fracturing model capable of reproducing realistic fracture behaviors should couple rock deformation, fracture propagation and fluid flow in the both …


Performance Comparison Of Transverse And Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability, Fen Yang Jan 2014

Performance Comparison Of Transverse And Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability, Fen Yang

Masters Theses

"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice.

Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was …