Open Access. Powered by Scholars. Published by Universities.®

Biochemical and Biomolecular Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 991 - 1020 of 1407

Full-Text Articles in Biochemical and Biomolecular Engineering

Fabrication Of High-Capacity Biomolecular Carriers From Dispersible Single-Walled Carbon Nanotube-Polymer Composites, Pu Zhang, David B. Henthorn Oct 2009

Fabrication Of High-Capacity Biomolecular Carriers From Dispersible Single-Walled Carbon Nanotube-Polymer Composites, Pu Zhang, David B. Henthorn

Chemical and Biochemical Engineering Faculty Research & Creative Works

One of the most interesting applications for carbon nanotubes is as a support material for bioanalytical devices. in this work, we successfully used an ultraviolet light initiated "graft from" polymerization method to fabricate polymer functionalized carbon nanotubes (PFCNTs) with pendant chains of various functionalities, including poly (ethylene glycol) chains to boost dispersibility and pendant epoxy groups for protein conjugate sites. a model enzyme, alkaline phosphatase, was used to study biomolecule loading efficiency as well as the retention of enzyme activity. Samples with various ratios of the two monomers were fabricated to optimize their use in aqueous environments, and an optimal …

Go to article

The Effect Of Glass Synthesis Route On Mechanical And Physical Properties Of Resultant Glass Ionomer Cements, A. Wren, O. M. Clarkin, F. R. Laffir, C. Ohtsuki, I. Y. Kim, Mark R. Towler Oct 2009

The Effect Of Glass Synthesis Route On Mechanical And Physical Properties Of Resultant Glass Ionomer Cements, A. Wren, O. M. Clarkin, F. R. Laffir, C. Ohtsuki, I. Y. Kim, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass ionomer cements (GICs) have potential orthopaedic applications. Solgel processing is reported as having advantages over the traditional melt-quench route for synthesizing the glass phase of GICs, including far lower processing temperatures and higher levels of glass purity and homogeneity. This work investigates a novel glass formulation, BT 101 (0.48 SiO2-0.36 ZnO-0.12 CaO-0.04 SrO) produced by both the melt-quench and the solgel route. The glass phase was characterized by X-ray diffraction (XRD) to determine whether the material was amorphous and differential thermal analysis (DTA) to measure the glass transition temperature (Tg). Particle size analysis (PSA) was …

Go to article

Methanol Electro-Oxidation On Pt-Ru Alloy Nanoparticles Supported On Carbon Nanotubes, Ang Li, Yangchuan Xing Sep 2009

Methanol Electro-Oxidation On Pt-Ru Alloy Nanoparticles Supported On Carbon Nanotubes, Ang Li, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

Carbon nanotubes (CNTs) have been investigated in recent years as a catalyst support for proton exchange membrane fuel cells. Improved catalyst activities were observed and attributed to metal-support interactions. We report a study on the kinetics of methanol electro-oxidation on CNT supported Pt-Ru alloy nanoparticles. Alloy catalysts with different compositions, Pt 53Ru 47/CNT, Pt 69Ru 31/CNT and Pt 77Ru 23/CNT, were prepared and investigated in detail. Experiments were conducted at various temperatures, electrode potentials, and methanol concentrations. It was found that the reaction order of methanol electro-oxidation on the PtRu/CNT catalysts was consistent with what has been reported for PtRu …

Go to article

Comparison Of Failure Mechanisms For Cements Used In Skeletal Luting Applications, O. Clarkin, D. Boyd, Mark R. Towler Aug 2009

Comparison Of Failure Mechanisms For Cements Used In Skeletal Luting Applications, O. Clarkin, D. Boyd, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass Polyalkenoate Cements (GPCs) based on strontium calcium zinc silicate (Sr-Ca-Zn-SiO2) glasses and low molecular weight poly (acrylic acid) (PAA) have been shown to exhibit suitable compressive strength (65 MPa) and flexural strength (14 MPa) for orthopaedic luting applications. In this study, two such GPC formulations, alongside two commercial cements (Simplex ® P and Hydroset™) were examined. Fracture toughness and tensile bond strength to sintered hydroxyapatite and a biomedical titanium alloy were examined. Fracture toughness of the commercial Poly(methyl methacrylate) cement, Simplex® P, (3.02 MPa m1/2) was superior to that of the novel GPC (0.36 MPa …

Go to article

Comparison Of An Experimental Bone Cement With A Commercial Control, Hydroset™, O. M. Clarkin, D. Boyd, S. Madigan, Mark R. Towler Jul 2009

Comparison Of An Experimental Bone Cement With A Commercial Control, Hydroset™, O. M. Clarkin, D. Boyd, S. Madigan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements based on strontium calcium zinc silicate glasses (Zn-GPCs) and high molecular weight polyacrylic acids (PAA) (MW; 52,000-210,000) have been shown to exhibit mechanical properties and in vitro bioactivity suitable for arthroplasty applications. Unfortunately, these formulations exhibit working times and setting times which are too short for invasive surgical applications such as bone void filling and fracture fixation. In this study, Zn-GPCs were formulated using a low molecular weight PAA (MW; 12,700) and a modifying agent, trisodium citrate dihydrate (TSC), with the aim of improving the rheological properties of Zn-GPCs. These novel formulations were then compared with commercial …

Go to article

Ptau Bimetallic Heteronanostructures Made By Post-Synthesis Modification Of Pt-On-Au Nanoparticles, Zhenmeng Peng Apr 2009

Ptau Bimetallic Heteronanostructures Made By Post-Synthesis Modification Of Pt-On-Au Nanoparticles, Zhenmeng Peng

Chemical, Biomolecular, and Corrosion Engineering Faculty Research

imetallic PtAu heteronanostructures have been synthesized from Pt-on-Au nanoparticles, which were made from platinum acetylacetonate and gold nanoparticles. Using the Pt-on-Au nanoparticles as precursors, Ptsurface rich PtAu bimetallic heteronanostructures can be produced through controlled thermal treatments, as confirmed by field emission high-resolution transmission electron microscopy (HR-TEM) and elemental mapping using a high-angle annular dark-field scanning transmission electron microscope (HAADF-STEM). Oxidation of formic acid was used as a model reaction to demonstrate the effects of varying composition and surface structure on the catalytic performance of PtAu bimetallic nanostructures. Cyclic voltammetry (CV) showed that these carbon-supported PtAu heteronanostructures were much more active …

Go to article

Effects Of Growth Media Ph And Reaction Water Activity On The Conversion Of Acetophenone To (S)-1-Phenylethanol By Saccharomyces Cerevisiae Immobilized On Celite 635 And In Calcium Alginate, Nicholas P. Coleman, Czarena Crofcheck, Sue E. Nokes, Barbara L. Knutson Mar 2009

Effects Of Growth Media Ph And Reaction Water Activity On The Conversion Of Acetophenone To (S)-1-Phenylethanol By Saccharomyces Cerevisiae Immobilized On Celite 635 And In Calcium Alginate, Nicholas P. Coleman, Czarena Crofcheck, Sue E. Nokes, Barbara L. Knutson

Biosystems and Agricultural Engineering Faculty Publications

Biologically catalyzed reactions often produce enantiomers of the product; however, only one configuration is desired. Reaction conditions are known to affect enantiomer ratios and reaction kinetics, but little is known regarding the effect of processing conditions on whole-cell biocatalysis. Saccharomyces cerevisiae cells were grown in batch on glucose at pH = 4, 5, and 7, and then immobilized on Celite beads or in calcium alginate beads and used as the biocatalyst for the conversion of acetophenone in hexane to (S)-1-phenylethanol at water activities of 0.37, 0.61, and 0.80. S. cerevisiae was used as a model microorganism for the whole-cell catalyzed …

Go to article

Biofilm Inhibitory Coatings Formulated From Glass Polyalkenoate Cement Chemistry: An Evaluation Of Their Adhesive Nature, A. Coughlan, D. Boyd, Mark R. Towler Mar 2009

Biofilm Inhibitory Coatings Formulated From Glass Polyalkenoate Cement Chemistry: An Evaluation Of Their Adhesive Nature, A. Coughlan, D. Boyd, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Researchers evaluated the adhesive nature of the biofilm inhibitory coatings formulated from glass polyalkenoate cement (GPC) chemistry with the aim to establish the novel testing modality by modifying the conventional T-peel tests. Special consideration was given to determine the resistance of a bonded assembly of two adherents having at least one adherent flexible to quantify the bond between tape and a surgical metal substrate bonded by a luting GPC. The delaminated tape surface was examined by scanning electron microscopy (SEM) with an accelerating voltage of 20 K V to determine whether failure of the bond was adhesive of cohesive in …

Go to article

Extraction Of Alkaloids From Opium, Keith Tomazi Feb 2009

Extraction Of Alkaloids From Opium, Keith Tomazi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A method for extracting at least one alkaloid from opium that includes dissolving opium in a solvent, heating the dissolved opium solution, cooling the dissolved opium solution, adjusting the pH of the dissolved opium solution with at least one first weak acid, filtering the dissolved opium solution to recover a filtrate; and then separating and purifying at least one alkaloid in the filtrate. Preferably, this includes an additional step of chilling the opium solution after adjusting the pH of the dissolved opium solution with at least one first acid. The preferred method for separating and purifying at least one alkaloid …

Go to article

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz Feb 2009

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz

Master's Theses

Microalgae are considered one of the most promising feedstocks for biofuel production for the future. The most efficient way to produce vast amounts of algal biomass is the use of closed tubular photobioreactors (PBR). The heat requirement for a given system is a major concern since the best algae growth rates are obtained between 25-30 °C, depending on the specific strain. A procedure to determine temperature influence on algal growth rates was developed for a lab-scale PBR system using the species Chlorella. A maximum growth rate of 1.44 doublings per day at 29 °C (optimal temperature) was determined. In addition, …

Go to article

Computed Tomographic Investigation Of The Influence Of Gas Sparger Design On Gas Holdup Distribution In A Bubble Column, B. C. Ong, P. Gupta, A. Youssef, M. (Muthanna) H. Al-Dahhan, M. P. Duduković Jan 2009

Computed Tomographic Investigation Of The Influence Of Gas Sparger Design On Gas Holdup Distribution In A Bubble Column, B. C. Ong, P. Gupta, A. Youssef, M. (Muthanna) H. Al-Dahhan, M. P. Duduković

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Effect of Gas Sparger Design on the Gas Holdup Radial Profile in a Bubble Column (With a Diameter of 0.162 M) Has Been Studied using Γ-Ray Computed Tomography (CT). Six Different Configurations of Gas Spargers Were Examined, using an Air-Water System for Selected Superficial Gas Velocities from 2 Cm/s to 30 Cm/s, Covering the Homogeneous and Heterogeneous (Churn-Turbulent) Flow Regimes. Two Operating Pressures Were Used: 1 and 4 Atm. Differences Were Found between the Gas Holdup Distributions Produced by Different Spargers at Dimensionless Radii of R/R < 0.8 in the Central Region of the Column. the Cross and Single Nozzle Spargers Produced Closely Similar Gas Holdup Distributions, While the Perforated Plate Sparger Produced a Higher Gas Holdup When Compared to Other Spargers with the Same Percentage Open Area (POA). at 4 Atm, the Sparger Design Did Not Have a Significant Effect on the Gas Holdup Profiles, Compared to Atmospheric Pressure, Except for the Case of the Single-Hole Sparger, Which Was Found to Yield a Higher Gas Holdup. © 2009 American Chemical Society.

Go to article

The Effect Of Sodium On The Catalytic Activity Of Zno-Al2o3/Zsm-5 And Sno-Al2o3/Zsm-5 For The Transesterification Of Vegetable Oil With Methanol, Manhoe Kim, Shuli Yan, Steven O. Salley, K.Y. Simon Ng Jan 2009

The Effect Of Sodium On The Catalytic Activity Of Zno-Al2o3/Zsm-5 And Sno-Al2o3/Zsm-5 For The Transesterification Of Vegetable Oil With Methanol, Manhoe Kim, Shuli Yan, Steven O. Salley, K.Y. Simon Ng

National Biofuels Energy Laboratory

In order to elucidate the effect of sodium on the activity of ZSM-5 supported metal oxides catalysts (ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5) for the transesterification of soybean oil with methanol, ZSM-5 supported metal oxides were prepared with and without sodium hydroxide by impregnation. The metal compositions of the ZSM-5 supported metal oxide catalysts and the metal concentrations dissolved from the catalysts to the methylester phase were measured by SEM-EDS and inductive coupled plasma spectroscopy, respectively. The catalytic activity of ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5 containing sodium did not originate from surface metal oxides sites, but from surface sodium sites or dissolved sodium leached from …

Go to article

Simulation Of Corn Stover And Distillers Grains Gasification With Aspen Plus, Ajay Kumar, Hossein Noureddini, Yaşar Demirel, David Jones, Milford Hanna Jan 2009

Simulation Of Corn Stover And Distillers Grains Gasification With Aspen Plus, Ajay Kumar, Hossein Noureddini, Yaşar Demirel, David Jones, Milford Hanna

Yaşar Demirel Publications

A model was developed to simulate the performance of a lab‐scale gasifier and predict the flowrate and composition of product from given biomass composition and gasifier operating conditions using Aspen Plus software. Mass balance, energy balance, and minimization of Gibbs free energy during the gasification were applied to determine the product gas composition. Carbon conversion efficiency and tar content were provided to the model as inputs as these could not be predicted by the model based on minimization of Gibbs free energy. Experiments for validation of the model were performed on a lab‐scale fluidized bed gasifier using corn stover and …

Go to article

Antibacterial Properties Of A Tri-Sodium Citrate Modified Glass Polyalkenoate Cement, A. W. Wren, D. Boyd, R. Thornton, J. C. Cooney, Mark R. Towler Jan 2009

Antibacterial Properties Of A Tri-Sodium Citrate Modified Glass Polyalkenoate Cement, A. W. Wren, D. Boyd, R. Thornton, J. C. Cooney, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Primary deep infection following joint replacement surgery accounts for 7% of all revisions. Glass polyalkenoate cements (GPCs) have previously been shown to exhibit antibacterial properties. The present study had two objectives. The first was to determine if addition of tri-sodium citrate (TSC) to the powder phase of an Al-free GPC (0.04 SrO-0.12 CaO-0.36 ZnO-0.48 SiO2, by mole fraction) enhanced the resultant cement's antibacterial properties against three strains of bacteria that are commonly found in periprosthetic sites following total joint replacements (TJRs); namely, E. coli, B. fragilis, and S. epidermidis. Four cement sets were prepared, which contained 0 wt% TSC (control), …

Go to article

The Design By Molecular Dynamics Modeling And Simulations Of Porous Polymer Adsorbent Media Immobilized On The Throughpore Surfaces Of Polymeric Monoliths, E. Riccardi, J. C. Wang, A. I. Liapis Jan 2009

The Design By Molecular Dynamics Modeling And Simulations Of Porous Polymer Adsorbent Media Immobilized On The Throughpore Surfaces Of Polymeric Monoliths, E. Riccardi, J. C. Wang, A. I. Liapis

Chemical and Biochemical Engineering Faculty Research & Creative Works

Ion-exchange porous adsorbent media having intermediate and low surface densities of dextran polymer grafted on the surface of the through pores of polymeric monoliths are constructed and characterized by a molecular dynamic modeling and simulation approach that has also been shown to be effective in the construction and characterization of porous ion-exchange adsorbent media whose number of immobilized dextran polymer chains per unit surface area is high. the activation step that prepares the surface of the pores of the dextran polymer layer for the immobilization of the charged ligands insignificantly affected the pore structure of the dextran polymer layer, while …

Go to article

Continuous-Flow, Rapid Lysis Devices For Biodefense Nucleic Acid Diagnostic Systems, Robert W. Doebler, Barbara Erwin, Anna Hickerson, Bruce Irvine, Denice Woyski, Ali Nadim, James D. Sterling Jan 2009

Continuous-Flow, Rapid Lysis Devices For Biodefense Nucleic Acid Diagnostic Systems, Robert W. Doebler, Barbara Erwin, Anna Hickerson, Bruce Irvine, Denice Woyski, Ali Nadim, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

Two mechanical lysis devices have been developed as compact, robust components to provide rapid sample preparation for nucleic acid diagnostic systems. One such component, known as the Micro Bead-Beater™ (μBB™, BBTM, Claremont BioSolutions, Upland, CA), is a compact device that is capable of ultrarapid lysis (>90% lysis in 30 s) of micro volumes (< 80 μL) of Bacillus spores in a continuous-flow format or in a disposable single-tube format. The μBB is also capable of processing much larger volumes of solutions containing spores or vegetative cells using a continuous-flow mode. A second mechanical lysis device designed as a disposable component is the microfluidic bead blender, which uses a small electric motor to spin vanes within the bead-laden solution. DNA quantification results using dsDNA-binding fluorescence dyes and real-time PCR are presented, comparing the lysis of Bacillus subtilis spores using the μBB™ with other well-known lysis techniques. Nanoscale imaging results obtained using scanning electron microscopy and transmission electron microscopy on B. subtilis spores lyzed using the μBB™ are also presented. © 2009, Society for Laboratory Automation and Screening. All rights reserved.

Go to article

Preliminary Investigation Of Novel Bone Graft Substitutes Based On Strontium-Calcium-Zinc-Silicate Glasses, D. Boyd, G. Carroll, Mark R. Towler, C. Freeman, P. Farthing, I. M. Brook Jan 2009

Preliminary Investigation Of Novel Bone Graft Substitutes Based On Strontium-Calcium-Zinc-Silicate Glasses, D. Boyd, G. Carroll, Mark R. Towler, C. Freeman, P. Farthing, I. M. Brook

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone graft procedures typically require surgeons to harvest bone from a second site on a given patient (Autograft) before repairing a bone defect. However, this results in increased surgical time, excessive blood loss and a significant increase in pain. In this context a synthetic bone graft with excellent histocompatibility, built in antibacterial efficacy and the ability to regenerate healthy tissue in place of diseased tissue would be a significant step forward relative to current state of the art philosophies. We developed a range of calcium-strontium-zinc-silicate glass-based bone grafts and characterized their structure and physical properties, then evaluated their in vitro …

Go to article

Organizational Agility, James D. Sterling Dec 2008

Organizational Agility, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Go to article

Antibacterial Coatings For Medical Devices Based On Glass Polyalkenoate Cement Chemistry, A. Coughlan, D. Boyd, C. W.I. Douglas, Mark R. Towler Dec 2008

Antibacterial Coatings For Medical Devices Based On Glass Polyalkenoate Cement Chemistry, A. Coughlan, D. Boyd, C. W.I. Douglas, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A biofilm is an accumulation of micro-organisms and their extracellular products forming a structured community on a surface. Biofilm formation on medical devices has severe health consequences as bacteria growing in this lifestyle are tolerant to both host defense mechanisms and antibiotic therapies. However, silver and zinc ions inhibit the attachment and proliferation of immature biofilms. The objective of this study is to evaluate whether it is possible to produce silver and zinc-containing glass polyalkenoate cement (GPC) coatings for medical devices that have antibacterial activity and which may therefore inhibit biofilm formation on a material surface. Two silver and zinc-containing …

Go to article

Simulation Of Nanostructured Electrodes For Polymer Electrolyte Membrane Fuel Cells, Sanjeev M. Rao, Yangchuan Xing Dec 2008

Simulation Of Nanostructured Electrodes For Polymer Electrolyte Membrane Fuel Cells, Sanjeev M. Rao, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

Aligned carbon nanotubes (CNTs) with Pt uniformly deposited on them are being considered in fabricating the catalyst layer of polymer electrolyte membrane (PEM) fuel cell electrodes. When coated with a proton conducting polymer (e.g., Nafion) on the Pt/CNTs, each Pt/CNT acts as a nanoelectrode and a collection of such nanoelectrodes constitutes the proposed nanostructured electrodes. Computer modeling was performed for the cathode side, in which both multicomponent and Knudsen diffusion were taken into account. the effect of the nanoelectrode lengths was also studied with catalyst layer thicknesses of 2, 4, 6, and 10 μm. It was observed that shorter lengths …

Go to article

Effect Of Operating Pressure On The Extent Of Hysteresis In A Trickle Bed Reactor, Zeljko V. Kuzeljevic, Werner Van Der Merwe, Muthanna H. Al-Dahhan, Milorad P. Dudukovic, Willie Nicol Oct 2008

Effect Of Operating Pressure On The Extent Of Hysteresis In A Trickle Bed Reactor, Zeljko V. Kuzeljevic, Werner Van Der Merwe, Muthanna H. Al-Dahhan, Milorad P. Dudukovic, Willie Nicol

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Dependence of Hydrodynamic Parameters, Such as Pressure Drop, on the Flow History of the Bed is Called Hysteresis. This Phenomenon is Most Commonly Associated with Changes of Flow Distribution and Flow Patterns with the Flow History. Many Studies Have Shown that Increased Operating Pressure Will Affect Flow Distribution and Wetting Efficiency; However, There Seems to Be No Study of the Effect of the Elevated Operating Pressure on the Extent of Hysteresis. in This Study, an Experimental Investigation of the Hysteresis in a High-Pressure Trickle Bed Has Been Performed. a Hysteresis Factor Has Been Introduced to Quantify the Extent of …

Go to article

Ala Spotlight Series V.2, James D. Sterling Oct 2008

Ala Spotlight Series V.2, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Go to article

Enhancing Water Removal From Whole Stillage By Enzyme Addition During Fermentation, Ana Beatriz Henriques, David B. Johnston, Muthanna H. Al-Dahhan Sep 2008

Enhancing Water Removal From Whole Stillage By Enzyme Addition During Fermentation, Ana Beatriz Henriques, David B. Johnston, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Removal of Water from Coproducts in the Fuel Ethanol Process Requires a Significant Energy Input. in This Study, the Addition of Commercially Available Cell-Wall-Degrading Enzymes Was Investigated to Determine Whether or Not the Enzymes Could Reduce the Amount of Water Bound within the Wet Grains. This Would Have the Effect of Allowing More Water to Be Removed during Centrifugation, Reducing the Time and Energy Needed during the Drying Process. the Experiment Screened 15 Cell-Wall-Degrading Enzyme Preparations. a Significant Reduction in Water-Binding Capacity Was Found for a Number of Enzymes Tested in the Initial Screening. the Experiment Was Repeated and …

Go to article

Labevolution: What's The Next Mutation?, James D. Sterling Aug 2008

Labevolution: What's The Next Mutation?, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Go to article

Effect Of Ph On Ptru Electrocatalysts Prepared Via A Polyol Process On Carbon Nanotubes, Li Ren, Yangchuan Xing Jul 2008

Effect Of Ph On Ptru Electrocatalysts Prepared Via A Polyol Process On Carbon Nanotubes, Li Ren, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper reports a study on the pH effects on the PtRu nanoparticles synthesized in a polyol process that were deposited on carbon nanotubes (CNTs) by reducing metal salts using ethylene glycol at various pHs. It was found that the nanoparticle size, composition, and catalytic activity all were sensitive to pH. the nanoparticles decreased in size as the preparation pH increased from 1.6 to 10.0, with the largest size at 2.47 nm and the smallest at 1.13 nm. an exception was found for pH at 0.7, which resulted in an average size of only 1.01 nm. Preparation pH was found …

Go to article

Local Characteristics Of Hydrodynamics In Draft Tube Airlift Bioreactor, Hu Ping Luo, Muthanna H. Al-Dahhan Jun 2008

Local Characteristics Of Hydrodynamics In Draft Tube Airlift Bioreactor, Hu Ping Luo, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Airlift Column Reactors Have Been Widely Used in Bioprocesses. the Design, Scale-Up, and Performance Evaluation of Such Reactors All Require Extensive and Accurate Information About the Gas-Liquid Flow Dynamics, Particularly as Computational Fluid Dynamics (CFD) Has Become More Popular in the Last Decade. However, Due to the Limitation of Most Conventional Techniques for Gas-Liquid Flow Dynamics Measurement, Only Global Hydrodynamic Parameters (E.g., Cross-Sectionally Averaged Liquid Circulation Velocity, overall Gas Holdup, and overall Mass Transfer Rate) Have Been Extensively Studied. the Local Flow Characteristics (E.g., the Macro-Mixing and the Turbulence Intensity) Remain Unclear. in This Study, We Use the Computer Automated …

Go to article

Building Benchmarks, James D. Sterling Jun 2008

Building Benchmarks, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

No abstract provided.

Go to article

Bubble Dynamics Investigation In A Slurry Bubble Column, Chengtian Wu, Kelsey Suddard, Muthanna H. Al-Dahhan May 2008

Bubble Dynamics Investigation In A Slurry Bubble Column, Chengtian Wu, Kelsey Suddard, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Application of Four-Point Optical Probe Has Been for the First Time Extended to a Slurry System in a 10.2-Cm ID Column. Bubble Dynamics (Local Gas Holdup, Bubble Chord Length, Bubble Velocity, Bubble Frequency, and Specific Interfacial Area) Were Investigated using an Air-Water-Catalyst System under Atmospheric Pressure. with an Increase in Solids Loading, the Local Gas Holdup, Specific Interfacial Area, and Bubble Frequency Decreased, While the Bubble Velocity Changed Slightly. Bubble Chord Length Increased Noticeably, and the Bubble Chord Length Distribution Spread More Widely at High Solids Loading. It Has Also Been Found that the Probe Orientation is Important for …

Go to article

Promoting Neuron Adhesion And Growth, Laura M. Y. Yu, Nic Leipzig, Molly S. Schoichet May 2008

Promoting Neuron Adhesion And Growth, Laura M. Y. Yu, Nic Leipzig, Molly S. Schoichet

Chemical, Biomolecular, and Corrosion Engineering Faculty Research

During nervous system development, the extracellular matrix (ECM) plays a pivotal role offering anchorage points to maturing neurons and neurites, as well as a permissive environment for tissue formation. Thus enhancement of cell adhesion is often an important criterion when designing biomaterials for neural tissue engineering. In addition to functionalizing biomaterials with ECM-derived cell adhesive molecules, there is emerging evidence that indicates the surface topography, stiffness, and electrical properties play an important role in neuron adhesion and neurite outgrowth. We describe recent developments in biomaterials modification for simulating the microenvironment in order to promote neuron adhesion and growth, as well …

Go to article

Mathematical Modeling Of Oral Cavity Mucositis, Jason White May 2008

Mathematical Modeling Of Oral Cavity Mucositis, Jason White

Honors Scholar Theses

Oral Mucositis is a condition seen in post-treatment mouth cancer patients and is a condition of which the pathobiology is not entirely known. It is a condition that shares many common pathways with other alimentary tract injuries such as inflammatory bowel disease. Mathematical modeling of the system can help to identify gaps in the current knowledge base as well as assist in generating new hypotheses and predicting clinical outcomes of conditions. A detailed mathematical model would assist researchers in determining which drug targets are worthwhile investigating. Deterministic modeling and Virtual Cell&#; software were used to assign rate constants to each …

Go to article

First Prev Next Last