Biochemical and Biomolecular Engineering Commons^™

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion US dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a …

Development Of A Method Of Oriented Immobilization Of Lipases On A Solid Carrier, Ziyavitdinov Jamolitdin Fazlitdinovich, Inogamov Utkir Kudratillayevich, Berdiev Nodir Sharifovich, Ishimov Uchkun Jomuradovich

CHEMISTRY AND CHEMICAL ENGINEERING

The methods of oriented immobilization of lipases on a solid carrier - Silochrome C-80 have been developed. The resulting sorbents were tested in the process of obtaining biodiesel from cotton oil. It was shown that immobilized lipase on Silochrome C-80 with NH2 group has the highest transetrification ability and stability, while in sorbents with the enzyme immobilized with -COOH and -SH groups this value was 87 and 53%, respectively. Biocatalysis using an affinity sorbent of immobilized lipase with the –NH2 group has a high operational stability, which, after 240 hours of operation, retains more than 50%, and after 480 hours, …

An Economic Analysis Of Small-Scale Biodiesel Production: Implementation Of Ethyl Ester Production In A Job Shop Setting, Scott Haase, Benjamin Craig

Journal of Undergraduate Research at Minnesota State University, Mankato

Biodiesel is becoming a demanded consumer automotive alternative fuel used in diesel vehicles today. An emerging trend is toward small-scale biodiesel production performed by the final consumer. A limited source of commercially available production systems exists and has resulted in many systems being designed and built by the user. Preliminary research conducted by the authors has shown biodiesel to be the least-cost alternative to petroleum diesel after as few as 8 months of system use. This study examines the economic viability of building and producing biodiesel using a small-scale production system versus buying consumer petroleum diesel. During production, measurements were …

Development And Utilization Of A Pair Of Sol-Gel Entrapped Lipases For Biodiesel Production From High Free Fatty Acid Oils, Cory M. Schwartz

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Biodiesel, which consists of fatty acid alkyl esters, is one of the most widely adopted and successful renewable fuels. Traditional physiochemical biodiesel production methods require high cost refined feedstocks, and so alternative methods of catalysis and feedstocks have been explored. This research investigated the use of polysiloxane entrapped lipases to catalyze the production of biodiesel from low cost feedstocks.

In this work, lipase from Burkholderia cepacia (lipase PS) and lipase B from Candida antarctica (CalB) were separately entrapped using sol-gel chemistry. Optimal reaction conditions for the esterification of free fatty acids by immobilized CalB with methanol were determined. Immobilized CalB …

A Critical Review On Recent Methods Used For Economically Viable And Eco-Friendly Development Of Microalgae As A Potential Feedstock For Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Microalgae are being considered as a viable feedstock for large-scale production of biodiesel. However, though it may look simpler to obtain lipids from microalgae, the overall process of choosing an algal strain, cultivation, harvesting, dewatering, and extraction of oil is quite complicated and not economically prudent at this time. A thorough understanding of algae and the overall biodiesel production process discussed in this paper is vital so that focused research might lower the costs involved. Various diverse species of microalgae are currently being used as feedstocks for biofuel. Heterotrophic culture may be preferred over photoautotrophic cultivation. For cultivation, specially fabricated …

A Novel Biodiesel And Glycerol Carbonate Production Plant, Nghi T. Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Crude glycerol is the byproduct of biodiesel production plant and the economic value of glycerol may affect the profitability of the biodiesel production plant. As the production rate of bioglycerol increases, its market values drop considerably. Therefore, conversion of bioglycerol into value-added products can reduce the overall cost, hence, leading to a more economical biodiesel production plant. In a direct carboxylation reaction, CO₂ reacts with glycerol to produce glycerol carbonate and water. This study presents a direct comparison of the economic analysis of the conventional biodiesel production plant and the possible next generation biodiesel-glycerol carbonate production plant. At the …

Effects Of Preparative Parameters On The Structure And Performance Of Ca-La Metal Oxide Catalysts For Oil Transesterification, Shuli Yan, Manhoe Kim, Siddharth Mohan, Steven O. Salley, K.Y. Simon Ng

National Biofuels Energy Laboratory

The effects of preparative parameters on the surface basicity, composition, and transesterification activities of several Ca-La metal oxide catalysts were investigated. Four different preparation methods: ammonia-ethanol-carbon dioxide precipitation, physical mixing, impregnation, and co-precipitation, were studied. It was found that the ammonia-ethanol-carbon dioxide precipitation method resulted in the highest BET specific surface area, base strength and base site concentration. Moreover, catalyst surface composition and basicity are a function of calcination temperature, precipitants, pH, and molar ratio of Ca to La in precursor solution, and storage conditions. XRD, XPS, basicity and BET tests revealed that catalyst structure and dispersion of Ca species …

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz

Master's Theses

Microalgae are considered one of the most promising feedstocks for biofuel production for the future. The most efficient way to produce vast amounts of algal biomass is the use of closed tubular photobioreactors (PBR). The heat requirement for a given system is a major concern since the best algae growth rates are obtained between 25-30 °C, depending on the specific strain. A procedure to determine temperature influence on algal growth rates was developed for a lab-scale PBR system using the species Chlorella. A maximum growth rate of 1.44 doublings per day at 29 °C (optimal temperature) was determined. In addition, …

The Effect Of Sodium On The Catalytic Activity Of Zno-Al2o3/Zsm-5 And Sno-Al2o3/Zsm-5 For The Transesterification Of Vegetable Oil With Methanol, Manhoe Kim, Shuli Yan, Steven O. Salley, K.Y. Simon Ng

National Biofuels Energy Laboratory

In order to elucidate the effect of sodium on the activity of ZSM-5 supported metal oxides catalysts (ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5) for the transesterification of soybean oil with methanol, ZSM-5 supported metal oxides were prepared with and without sodium hydroxide by impregnation. The metal compositions of the ZSM-5 supported metal oxide catalysts and the metal concentrations dissolved from the catalysts to the methylester phase were measured by SEM-EDS and inductive coupled plasma spectroscopy, respectively. The catalytic activity of ZnO-Al2O3/ZSM-5 and SnO-Al2O3/ZSM-5 containing sodium did not originate from surface metal oxides sites, but from surface sodium sites or dissolved sodium leached from …