Open Access. Powered by Scholars. Published by Universities.®
Biochemical and Biomolecular Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Publication
- Publication Type
Articles 1 - 7 of 7
Full-Text Articles in Biochemical and Biomolecular Engineering
Influence Of Fused Deposition Modeling Process Parameters On The Constitutive Model Of Hyperelastic Thermoplastic Polyurethane, Lucas Gallup, Mohamed Trabia, Brendan O'Toole, Youssef Fahmy
Influence Of Fused Deposition Modeling Process Parameters On The Constitutive Model Of Hyperelastic Thermoplastic Polyurethane, Lucas Gallup, Mohamed Trabia, Brendan O'Toole, Youssef Fahmy
Mechanical Engineering Faculty Research
Thermoplastic polyurethanes (TPUs) are suited for fused deposition modeling (FDM) of parts that require high levels of flexibility and strength. Predicting the deformation of TPU parts produced using FDM may be difficult, especially under large deformations, as their constitutive models depend on the printing process parameters. The lack of understanding led to the absence of constitutive models for TPU parts produced using FDM. This work aims to identify accurate hyperelastic constitutive models. Six groups of uniaxial tensile specimens were produced using FDM. These groups were made with variations in two process parameters, which were infill geometry and extrusion nozzle temperature. …
3d-Printed Boron Nitride Catalytic Monoliths For Oxidative Dehydrogenation Of Propane, Theodore Agbi, Wei Shang Lo, Khaled Baamran, Taekyung Ryu, Christine Cheung, Fateme Rezaei, Ive Hermans
3d-Printed Boron Nitride Catalytic Monoliths For Oxidative Dehydrogenation Of Propane, Theodore Agbi, Wei Shang Lo, Khaled Baamran, Taekyung Ryu, Christine Cheung, Fateme Rezaei, Ive Hermans
Chemical and Biochemical Engineering Faculty Research & Creative Works
Boron-containing materials are efficient catalysts for the oxidative dehydrogenation of propane to propylene, proceeding via radical intermediates. The radical mechanism is initiated by the solid surface and propagated in the gas phase. It has been hypothesized that the propylene selectivity could be increased by enhancing the gas-phase contributions by favoring the formation of iso- over n-propyl radical intermediates. Indeed, whereas n-propyl radicals can be converted to both propylene and ethylene, iso-propyl radicals yield exclusively propylene. In this contribution, we explore 3D printing to structure the hexagonal boron nitride (hBN) heterogeneous catalyst with high void space. 3D-printed hBN monoliths were found …
Process Evaluation And Kinetic Analysis Of 3d-Printed Monoliths Comprised Of Cao And Cr/H-Zsm-5 In Combined Co2 Capture-C2h6 Oxidative Dehydrogenation To C2h4, Khaled Baamran, Shane Lawson, Ali A. Rownaghi, Fateme Rezaei
Process Evaluation And Kinetic Analysis Of 3d-Printed Monoliths Comprised Of Cao And Cr/H-Zsm-5 In Combined Co2 Capture-C2h6 Oxidative Dehydrogenation To C2h4, Khaled Baamran, Shane Lawson, Ali A. Rownaghi, Fateme Rezaei
Chemical and Biochemical Engineering Faculty Research & Creative Works
In this study, dual-function materials (DFMs) comprised of CaO and Cr/H-ZSM-5 were formulated in 3D-printed monolithic structures and investigated in a combined process for capture and utilization of CO2 in oxidative dehydrogenation of C2H6 to C2H4 (CO2-ODHE). Various formulation strategies were employed to fabricate these DFM structures. Two bed designs were considered: i) a layered-bed in which adsorbent (CaO) and catalyst were printed separately and stacked on top of each other, and ii) a single-layer bed where the adsorbent-catalyst materials were 3D-printed into a singular monolith and loaded into the bed …
A Wirelessly Controlled Scalable 3d-Printed Microsystem For Drug Delivery, Farzad Forouzandeh, Nuzhet N. Ahamed, Xiaoxia Zhu, Parveen Bazard, Krittika Goyal, Joseph P. Walton, Robert D. Frisina, David A. Borkholder
A Wirelessly Controlled Scalable 3d-Printed Microsystem For Drug Delivery, Farzad Forouzandeh, Nuzhet N. Ahamed, Xiaoxia Zhu, Parveen Bazard, Krittika Goyal, Joseph P. Walton, Robert D. Frisina, David A. Borkholder
Chemical and Biochemical Engineering Faculty Research & Creative Works
Here we present a 3D-printed, wirelessly controlled microsystem for drug delivery, comprising a refillable micro reservoir and a phase-change peristaltic micropump. The micropump structure was inkjet-printed on the back of a printed circuit board around a catheter microtubing. The enclosure of the microsystem was fabricated using stereolithography 3D printing, with an embedded micro reservoir structure and integrated micropump. In one configuration, the microsystem was optimized for murine inner ear drug delivery with an overall size of 19 x 13 x 3 mm3. Benchtop results confirmed the performance of the device for reliable drug delivery. The suitability of the device for …
Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh
Quantifying Mafenide Release From 3d Printed Phenylalanine-Coumarin Copolyester Scaffolds, Jacob Seeh
Williams Honors College, Honors Research Projects
This project addressed burn wound healing through controlled release of the antibacterial drug mafenide encapsulated by a copolyster into 3D printed scaffolds. Scaffolds were printed at 25oC and 0.77-1 bar in a cross-hatch pattern with uniform thickness, distance between parallel layers, and diameter then photo-crosslinked. The number of scaffolds available for testing was limited by the amount of polymer that could be synthesized. A high-performance liquid chromatography method was developed specifically for this experiment and used to determine daily release of mafenide from the scaffold into a 2-mL phosphate buffer solution. During the first 24 hours a large …
Reaction Profiling Of Extracellular Protein Phosphorylation Through A Microfluidic Reactor Coupled With Raman Spectroscopy, Abigail Casey
Reaction Profiling Of Extracellular Protein Phosphorylation Through A Microfluidic Reactor Coupled With Raman Spectroscopy, Abigail Casey
Theses and Dissertations
Diseases and disorders in the human body are considered abnormalities of proper cellular function. Understanding the signal transduction mechanisms that cause these abnormalities is crucial to developing earlier detection methods, better treatment options and effective cures. While current diagnostic procedures are powerful tools in diagnosing diseases, they are ineffective in informing physicians on the real-time behavior of the signal transduction mechanisms associated with diseases and disorders. Currently, disease progression is monitored over time through routine patient visits and testing by one or more of the above techniques. By developing an approach that can monitor structural and conformational changes of proteins …
Synthesis Of Cr, Cu, Ni, And Y-Doped 3d-Printed Zsm-5 Monoliths And Their Catalytic Performance For N-Hexane Cracking, Xin Li, Abdo Alslam Alwakwak, Fateme Rezaei, Ali A. Rownaghi
Synthesis Of Cr, Cu, Ni, And Y-Doped 3d-Printed Zsm-5 Monoliths And Their Catalytic Performance For N-Hexane Cracking, Xin Li, Abdo Alslam Alwakwak, Fateme Rezaei, Ali A. Rownaghi
Chemical and Biochemical Engineering Faculty Research & Creative Works
In this work, chromium, copper, nickel, and yttrium-doped 3D-printed ZSM-5 monoliths were synthesized by doping the ZSM-5 zeolite paste with corresponding metal precursors. The physical and acid properties of the metal-doped 3D-printed ZSM-5 monoliths were systematically characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR), N2 adsorption, temperature programmed reduction of H2(H2-TPR), and temperature-programmed desorption of ammonia (NH3-TPD) techniques. The characterization of bare and metal-doped monoliths confirmed the presence of metal promoters within the zeolite matrix while their MFI frameworks were retained after doping and printing. It …