Tio 2 Fibers: Tunable Polymorphic Phase Transformation And Electrochemical Properties,
2015
The University of Texas Rio Grande Valley
Tio 2 Fibers: Tunable Polymorphic Phase Transformation And Electrochemical Properties, Edna Garcia, Qiang Li, Xing Sun, Karen Lozano, Yuanbing Mao
School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)
A series of one-dimensional (1D) nanoparticle-assembled TiO2 fibers with tunable polymorphs were prepared via a novel and large scale ForceSpinning® process of titanium tetraisopropoxide (TTIP)/polyvinylpyrrolidone (PVP) precursor fibers followed with a thermal treatment at various calcinations temperatures. The thermal and structural transformations were characterized by thermogravimetric analysis/differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction. The influence of polymorphic phase of the TiO2 fibers on the electrochemical performance in neutral aqueous 1 M Na2SO4 electrolyte was investigated. The polymorphic amorphous/anatase/rutile TiO2 fibers prepared at 450 °C achieved a highest capacitance of 21.2 F g−1 (6.61 mF cm−2) at a current …
In Vitro Studies Of Gold And Gold Silica Nanoparticle Radiosensitization With Kilovoltage X-Rays,
2015
University of Nevada, Las Vegas
In Vitro Studies Of Gold And Gold Silica Nanoparticle Radiosensitization With Kilovoltage X-Rays, Gregory Colarch
UNLV Theses, Dissertations, Professional Papers, and Capstones
Technological advances in the ability to construct and manipulate nanoscale particles have opened up the possibility of using solid metallic nanoparticles and mixed metal nanoshells as a means to increase dose enhancement and treatment efficacy to tumors. In order for nanoparticles to be an effective form of treatment, they must be delivered to tumors in sufficient concentrations so that there is a dose enhancement factor due to ionizing radiation, as well as being essentially non-toxic to healthy cells. Gold nanoparticles and silica-gold nanoshells fit these requirements. Gold has a high atomic number (Z=79), which gives a larger cross section for …
Alloy Solute Interactions At Grain Boundaries And Nanoscale Interfaces In Copper,
2015
University at Albany, State University of New York
Alloy Solute Interactions At Grain Boundaries And Nanoscale Interfaces In Copper, Luke Prestowitz
Nanoscale Science & Engineering (discontinued with class year 2014)
To study grain boundary solute interactions we have developed recipes for co-electrodeposition of dilute copper alloys including Cu(Ni) and Cu(Co). Secondary Ion Mass Spectrometry (SIMS) was used to analyze the incorporation of solute into the copper film. In addition to the co-electrodeposition process we also used a drive-in diffusion model for Au, Ag, Co, and Ni. Atomic imaging in a scanning transmission electron microscope (STEM) was used to visualize and investigate solute at grain boundaries and interfaces in polygranular copper films. By understanding these interactions and pathways of alloying solutes in copper microstructures, we can more accurately predict alloying behavior …
Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries,
2015
State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China;Graduate University of Chinese Academy of Sciences, Beijing 100049, China;
Porous Co3O4 Hollow Nanospheres Cathode Catalyst For High-Capacity And Long-Cycle Li-Air Batteries, Tong Liu, Na Li, Qing-Chao Liu, Xin-Bo Zhang
Journal of Electrochemistry
In this paper, a high specific surface area of porous Co3O4 hollow nanospheres was successfully synthesized via hydrothermal carbonization at 140 °C, followed by calcination using cobalt nitrate hexahydrate (Co(NO3)2·6H2O), hexamethylenetetramine (HMT), sucrose, and sodium citrate (Na3C6H5O7). The porous Co3O4 hollow nanospheres consisted of nanoparticles with high specific surface area of mesoporous structure, and could provide active reaction sites for OER and ORR. When used as lithium-air battery cathode catalyst, the Co3O4/Super P (SP) electrode exhibited excellent cycle performance, resulting in high capacity and long life of lithium-air batteries.
Electrospinning Of Polycaprolactone Core-Shell Nanofibers With Anti-Cancer Drug,
2015
Georgia Southern University
Electrospinning Of Polycaprolactone Core-Shell Nanofibers With Anti-Cancer Drug, Sakib Iqbal, Mujibur Khan, Saheem Absar, Andrew Diamanduros, Samuel Chambers
GS4 Student Scholars Symposium
Encapsulation of a model anti-cancer drug, 5-Fluorouracul (5-FU) into biocompatible core-shell nanofibers of polycaprolactone (PCL) nanofibers was fabricated using a coaxial electrospinning process. Our work aims to solve these issues using a novel method of fabrication of fibers featuring confinement of drugs within a biodegradable core-shell structure, thereby permitting sustained release of drugs to specific sites of treatment, such as tissues affected with tumor cells. The coaxial electrospinning was performed using a sheath polymer solution consisting of a 14 wt% PCL solution and a 5 wt% solution of 5-FU as the core solution. Dimethylformamide (DMF) was used as the solvent …
Local Control Robotic Surgical Devices And Related Methods,
2015
University of Nebraska - Lincoln
Local Control Robotic Surgical Devices And Related Methods, Eric Markvicka, Tom Frederick, Jack Mondry, Joe Bartels, Shane Farritor
Department of Mechanical and Materials Engineering: Faculty Publications
The various robotic medical devices include robotic devices that are disposed within a body cavity and positioned using a support component disposed through an orifice or opening in the body cavity. Additional embodiments relate to devices having arms coupled to a device body wherein the device has a minimal profile such that the device can be easily inserted through smaller incisions in comparison to other devices without such a small profile. Further embodiments relate to methods of operating the above devices.
Investigations Of Carbon Nanotube Catalyst Morphology And Behavior With Transmission Electron Microscopy,
2015
Purdue University
Investigations Of Carbon Nanotube Catalyst Morphology And Behavior With Transmission Electron Microscopy, Sammy M. Saber
Open Access Dissertations
Carbon nanotubes (CNTs) are materials with significant potential applications due to their desirable mechanical and electronic properties, which can both vary based on their structure. Electronic applications for CNTs are still few and not widely available, mainly due to the difficulty in the control of fabrication. Carbon nanotubes are grown in batches, but despite many years of research from their first discovery in 1991, there are still many unanswered questions regarding how to control the structure of CNTs. This work attempts to bridge some of the gap between question and answer by focusing on the catalyst particle used in common …
Functional Clay Nanotubes And Composites,
2015
Louisiana Tech University
Functional Clay Nanotubes And Composites, Yafei Zhao
Doctoral Dissertations
Tubular nanomaterials and their composites have been extensively studied in recent years in the fields of physics, chemistry, biology, and biomedicine. Carbon nanotube is the most commonly studied tubular nanomaterial; however, toxicity and high cost make it less attractive in industry and thus restricts its applications. Halloysite nanotubes, which are available in abundance in the United States as well as in other countries around the world, is a low-cost, unique and versatile aluminosilicate mineral with a chemical formula of Al4Si4O10(OH)8·nH2O. Basically, the halloysite tube diameter is around 50 nm and the length varies with different locations ranging from 0.4-1.5 μm. …
Modeling And Analysis Of A Resonant Nanosystem,
2015
Purdue University
Modeling And Analysis Of A Resonant Nanosystem, Scott L. Calvert
Open Access Theses
The majority of investigations into nanoelectromechanical resonators focus on a single area of the resonator's function. This focus varies from the development of a model for a beam's vibration, to the modeling of electrostatic forces, to a qualitative explanation of experimentally-obtained currents. Despite these efforts, there remains a gap between these works, and the level of sophistication needed to truly design nanoresonant systems for efficient commercial use. Towards this end, a comprehensive system model for both a nanobeam resonator and its related experimental setup is proposed. Furthermore, a simulation arrangement is suggested as a method for facilitating the study of …
Preparation Of Bismuth Telluride Based Thermoelectric Nanomaterials Via Low-Energy Ball Milling And Their Property Characterizations,
2015
Purdue University
Preparation Of Bismuth Telluride Based Thermoelectric Nanomaterials Via Low-Energy Ball Milling And Their Property Characterizations, Christopher Robinson
Open Access Theses
Thermoelectric materials are able to convert energy between heat and electricity with no moving parts, making them very appealing for power generation purposes. This is particularly appealing since many forms of energy generation lose energy to waste heat. The Livermore National Laboratory estimates that up to 55% of the energy created in traditional power plants is lost through heat generation [1]. As greenhouse gas emissions become a more important issue, large sources of waste like this will need to be harnessed. ^ Adoption of these materials has been limited due to the cost and efficiency of current technology. Bismuth telluride …
Freezing-Induced Deformation Of Biomaterials In Cryomedicine,
2015
School of Mechanical Engineering, Purdue University, West Lafayette, IN
Freezing-Induced Deformation Of Biomaterials In Cryomedicine, Altug Ozcelikkale
Open Access Dissertations
Cryomedicine utilizes low temperature treatments of biological proteins, cells and tissues for cryopreservation, materials processing and cryotherapy. Lack of proper understanding of cryodamage that occurs during these applications remains to be the primary bottleneck for development of successful tissue cryopreservation and cryosurgery procedures. An engineering approach based on a view of biological systems as functional biomaterials can help identify, predict and control the primary cryodamage mechanisms by developing an understanding of underlying freezing-induced biophysical processes. In particular, freezing constitutes the main structural/mechanical origin of cryodamage and results in significant deformation of biomaterials at multiple length scales. Understanding of these freezing-induced …
Growth Of Low Disorder Gaas/Algaas Heterostructures By Molecular Beam Epitaxy For The Study Of Correlated Electron Phases In Two Dimensions,
2015
Purdue University
Growth Of Low Disorder Gaas/Algaas Heterostructures By Molecular Beam Epitaxy For The Study Of Correlated Electron Phases In Two Dimensions, John D. Watson
Open Access Dissertations
The unparalleled quality of GaAs/AlGaAs heterostructures grown by molecular beam epitaxy has enabled a wide range of experiments probing interaction effects in two-dimensional electron and hole gases. This dissertation presents work aimed at further understanding the key material-related issues currently limiting the quality of these 2D systems, particularly in relation to the fractional quantum Hall effect in the 2nd Landau level and spin-based implementations of quantum computation.^ The manuscript begins with a theoretical introduction to the quantum Hall effect which outlines the experimental conditions necessary to study the physics of interest and motivates the use of the semiconductor growth …
In Vivo Near Ir Fluorescent Imaging Of Hollow Polymeric Nanocapsules,
2015
Old Dominion University
In Vivo Near Ir Fluorescent Imaging Of Hollow Polymeric Nanocapsules, Venkata Suresh Patthipati
Biological Sciences Theses & Dissertations
Medical Imaging has been an integral component in medical diagnosis and therapeutics. It is frequently used in conjunction with other treatment modalities and has been used for developing applications that range from cancer management to clinical practice. Nanotechnology and its applications are foreseen to have a profound impact on life sciences. Nanomaterial based imaging has a significant potential in addressing medical challenges such as tumor localization, targeted delivery of drugs and real time diagnosis and management of circulation pathology. In particular, polymer based nanoparticles are increasingly being developed as they can be customized according to the diagnostic and/or therapeutic requirements. …
Structural Patterns At All Scales In A Nonmetallic Chiral Au_133(Sr)_52 Nanoparticle,
2015
Carnegie Mellon University
Structural Patterns At All Scales In A Nonmetallic Chiral Au_133(Sr)_52 Nanoparticle, Chenjie Zeng, Yuxiang Chen, Kristin Kirschbaum, Kannatassen Appavoo, Matthew Y. Sfeir, Rongchao Jin
Publications and Research
Structural ordering is widely present in molecules and materials. However, the organization of molecules on the curved surface of nanoparticles is still the least understood owing to the major limitations of the current surface characterization tools. By the merits of x-ray crystallography, we reveal the structural ordering at all scales in a super robust 133–gold atom nanoparticle protected by 52 thiolate ligands, which is manifested in self-assembled hierarchical patterns starting from the metal core to the interfacial –S–Au–S– ladder-like helical “stripes” and further to the “swirls” of carbon tails. These complex surface patterns have not been observed in the smaller …
Methods And Systems For Handling Or Delivering Materials For Natural Orifice Surgery,
2015
Lincoln, NE
Methods And Systems For Handling Or Delivering Materials For Natural Orifice Surgery, Carl Nelson, Jeff Midday, Dimitry Oleynikov, Alan Goyzueta
Department of Mechanical and Materials Engineering: Faculty Publications
The embodiments disclosed herein relate to various medical systems, including systems that can be used in conjunction with medical devices used in endoscopic surgery. Certain embodiments include various material handling devices that can transport materials between the inside and the outside of an endoscopic surgery patient.
Electrical And Physical Property Characterization Of Single Walled Carbon Nanotube Ink For Flexible Printed Electronics,
2015
Air Force Institute of Technology
Electrical And Physical Property Characterization Of Single Walled Carbon Nanotube Ink For Flexible Printed Electronics, Kristian E. Warner Jr.
Theses and Dissertations
This research presents a method of characterizing single-walled carbon nanotube (SWCNT) ink. This research also examines the results of our characterization efforts. First, the process of ink jet printing SWCNT ink onto organic and inorganic substrates is discussed. Next, the tests for measuring sheet resistance, conductance, inductance, adherence, thickness, roll-off, and S-parameters of the ink are described. Results and findings of the research are presented. The SWCNT ink created by Brewer Science © is shown to be an effective material for additive manufacturing using an aerosol jet printer, but not an inkjet printer. The ink is shown to have a …
A Novel Nitrite Sensing Electrode Based On Au/Fe3O4/Chitosan Nanocomposite,
2015
Institute of Environmental and Analytical Sciences, College of Chemistry and Chemical Engineering, Henan University, Kaifeng 475004, Henan, China;
A Novel Nitrite Sensing Electrode Based On Au/Fe3O4/Chitosan Nanocomposite, Ying Dong, Yong Wang, Huan-Huan Xing, Jian-Ying Qu
Journal of Electrochemistry
A novel nitrite sensing electrode based on gold nanoparticles and iron oxides (Fe3O4) magnetic nanoparticles was fabricated with chitosan as the protective film on glassy carbon matrix. Experiment results showed that the sensing electrode exhibited good electrocatalytic activity toward oxidation of nitrite, and the oxidation peak current increased linearly with the concentration of nitrite varying from 5.0×10-6 to 2.0×10-3 mol·L-1 (R=0.9996) with a detection limit of 7.1×10-7 mol·L-1 (S/N=3). The sensing electrode exhibited good sensitivity, selectivity and repeatability.
Sensitive Detection Of Hydroxyl Radical Based On Silver-Enhanced Gold Nanoparticle Label,
2015
State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha Hunan 410082, China;College of Chemistry and Pharmaceutical engineering, Nanyang Normal University, Henan Nanyang, 473061, China;
Sensitive Detection Of Hydroxyl Radical Based On Silver-Enhanced Gold Nanoparticle Label, Yan Yang, Peng Yu, Xiao-Hua Zhang, Jin-Hua Chen
Journal of Electrochemistry
A novel DNA-based electrochemical sensor has been successfully constructed for sensitive detection of hydroxyl radical (·OH) based on the silver-enhanced gold nanoparticle label. Thiolated DNA1 was firstly immobilized on the gold electrode through Au—S bonds. The ·OH generated from Fenton reaction could induce serious oxidative damage of the DNA1 layer on the electrode surface. Then DNA2-functionalized gold nanoparticles (DNA2-AuNPs) were linked on the electrode through the hybridization between DNA2 and undamaged DNA1. Based on the catalytic reduction of silver ion by AuNPs, a silver layer was formed on the surface of AuNPs. The quantitative assay of ·OH was carried out …
Nanosized Fe2O3 On Three Dimensional Hierarchical Porous Graphene-Like Matrices As High-Performance Anode Material For Lithium Ion Batteries,
2015
State Key Laboratory of Optoelectronic Materials and Technologies, School of Physics and Engineering, Sun Yat-sen University, Guangzhou 510275, China;
Nanosized Fe2O3 On Three Dimensional Hierarchical Porous Graphene-Like Matrices As High-Performance Anode Material For Lithium Ion Batteries, Qin-Wei Zhang, Yun-Yong Li, Pei-Kang Shen
Journal of Electrochemistry
Ferric oxide (Fe2O3) as a promising anode material for lithium ion battery is due to its high theoretical capacity (1007 mAh·g-1), earth abundance and low cost. The nanosized Fe2O3 on the three dimensional hierarchical porous graphene-like network (denoted as Fe2O3-3D HPG) has been synthesized by homogeneous precipitation and heat treatment. The 3D HPG can provide a highly conductive structure in conjunction to support well contacted Fe2O3 nanoparticles, and effectively enhance the mechanical strength of the matrices during volume changes, as well as improve the …
Effects Of Etchants On Surface Morphologies And Electrochemical Performance Of Iro2-Mno2 Anodic Nano-Coatings,
2015
School of Material Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China;
Effects Of Etchants On Surface Morphologies And Electrochemical Performance Of Iro2-Mno2 Anodic Nano-Coatings, Qing-Guo Fan, Zhi-Guo Ye, Hui-Min Meng, Chun-Min Lu
Journal of Electrochemistry
The IrO2-MnO2 anodic nano-coatings were prepared by the traditional thermal decomposition method on the different surfaces of Ti substrates pretreated by different etchants (HCl, H2SO4, C2H2O4 and HF). Surface morphologies and electrochemical performance of the Ti based IrO2-MnO2 anodic coatings were investigated by field emission scanning electron microscopy (FESEM), cyclic voltammetry (CV) and polarization techniques. Analysis showed that the denser IrO2 nano-particles with longer dimensions were obtained at the IrO2-MnO2 anodic coating surfaces on the Ti substrates etched by HF and …
