Nanoscience and Nanotechnology Commons^™

Structural Evolution During Synthesis And Annealing Of Platinum-Nickel Bimetallic Nanoparticles, Xiner Lu

All Theses

In the past years, there has been an increasing interest in synthesizing Pt alloy nanocrystals to achieve high catalytic performance for energy-related applications. Pt-Ni nanoparticles (NPs) have shown high electrocatalytic activity for electrocatalysis and thermal catalysis. However, the stability of surface structures and compositions still needs to be improved to obtain better long-term catalytic stability. It is noted that thermal annealing can adjust the surface structures and compositions to improve the stability. Transmission electron microscopy (TEM) plays a vital role in characterizing the morphology, structure, and composition of nanoparticles. Specifically, the utilization of in situ TEM can allow for observing …

Towards Highly Sensitive Capacitance Measurements Of A Quantum Anomalous Hall Phase In Van Der Waal Heterostructures, Kayla Cerminara

UNLV Theses, Dissertations, Professional Papers, and Capstones

One of the pioneering achievements in condensed matter physics of the 20th century is the observation of the quantum Hall e↵ect (QHE) in which the Hall resistance in a two-dimensional (2D) sample takes on quantized values in the presence of a strong perpendicular magnetic field. The precise quantization of the hall resistance to one part in a billion has provided a practical, worldwide resistance standard. A long-standing goal has been to realize a similar state of matter but without the need of a strong quantizing magnetic field. The quantum anomalous Hall e↵ect (QAHE) is such a state that is predicted …

The Growth Of Polarization Domains In Ultrathin Ferroelectric Films Seeded By The Tip Of An Atomic Force Microscope, Mohammad Zamani-Alavijeh, Timothy A. Morgan, Adrian V. Kuchuk, Gregory J. Salamo

Physics Faculty Publications and Presentations

Piezoresponse force microscopy is used to study the velocity of the polarization domain wall in ultrathin ferroelectric barium titanate (BTO) films grown on strontium titanate (STO) substrates by molecular beam epitaxy. The electric field due to the cone of the atomic force microscope tip is demonstrated as the dominant electric field for domain expansion in thin films at lateral distances greater than about one tip diameter away from the tip. The velocity of the domain wall under the applied electric field by the tip in BTO for thin films (less than 40 nm) followed an expanding process given by Merz's …

Synthesis Of Monodisperse Nanoscintillators At High Temperatures For Biomedical Relevant Applications, Eric Zhang

All Dissertations

Luminescent sub-100 nm particulates continuously generate immense research interest in the biomedical field for imaging, theranostics, and optogenetics. Conventionally, upconversion nanoparticles or UV activated semiconductors are studied, however these materials are limited by biological barriers such as the skin which reduces the penetration depth of these excitation sources, tissue's auto- fluorescence, and toxicity. One approach to overcome these challenges is to use nanoscintillators (sub-100 nm materials that can generate visible light using high energy excitation sources such as x-rays) which can generate light locally to the human body. Numerous scintillators have been reported since the discovery of x-rays from the …

Surface Laser Texturing Of Cocrmo Alloys, Gabriel Dharwadker

Biomedical Engineering Undergraduate Honors Theses

Artificial orthopedic implants such as hip joints suffer from excessive wear due to excess friction between the polyethylene and cobalt-chromium-molybdenum surfaces of the device. This increase in friction causes a fraction of them to give out within ten years. Therefore, to minimize the probability of this happening, recent research has been conducted regarding laser surface texturing of the cobalt-chromium-molybdenum alloy components of artificial joints. These surface textures serve to mimic the native lubrication mechanisms of cartilage in natural joints, which, in a natural joint, lowers the friction. However, the production of these laser surface textures is still a field of …

Nanoparticles For Biomedical Applications, Joseph Kim

Dissertations and Theses (Open Access)

This thesis presents development and evaluation of the potential of three new nanoparticles for biomedical applications. With the rapid growth of the field of nanoscience, researchers have explored developing nanoparticles for various biomedical applications, including imaging, therapy, and drug delivery. This thesis demonstrates the development of two C­₆₀ fullerene based nanoparticles and one boron based nanoparticle to answer key questions related to their biological potential.

In the first part of the thesis, we describe synthesis and characterization of a pure boron nanoparticle containing asolectin phospholipid-based liposome construct prepared using a water-in-oil emulsion method, as a novel alternative agent for …

Rational Design Of Composite Nanomaterials For Water Treatment Applications, Mariana Marcos-Hernandez

Open Access Theses & Dissertations

Water quantity and quality have been affected in communities all around the world due to population growth, pollution, changes in land use, and climate change. In order to cope with existing and anticipated water demands and shortages, the use of treated or reclaimed water is an ongoing alternative that has helped communities all over the world address this problem. The adaptation of nanotechnology to traditional water and wastewater treatment processes offers new opportunities in technological developments. Unique size-dependent properties such as: high surface to mass ratio, high reactivity, high sorption capacities, fast dissolution, superparamagnetism, among others, provide high-tech efficient materials …

Surface-Functionalized Chemiresistive Films That Exploit H-Bonding, Cation-Pi, And Metal-Halide Interactions., Prasadanie Karunarathna Adhihetty

Electronic Theses and Dissertations

The development of gas sensors for detection of volatile organic compounds (VOCs) has been of interest in the sensing field for decades. To date, the use of metal nanoparticle-based chemiresistors for trace VOC detection, particularly gold nanoparticle-based sensors, is of great interest due to their high chemical stability, ease of synthesis, unique optical properties, large surface to volume ratio, and high level of conductivity. Much effort has been devoted towards gold monolayer protected clusters (Au MPCs) as chemiresistors to detect harmful VOCs. The present thesis documents the results of our efforts to exploit the advantages of functionalized Au MPCs chemiresistors …

A Performance Guide For Four Songs By Francisco Mignone, Amanda Mara Rizzotto Vidal Pessoa

UNLV Theses, Dissertations, Professional Papers, and Capstones

The scope of this document is to demonstrate the richness and diversity to be found in the art song genre from countries outside of the standard repertoire, specifically focusing on the Brazilian composer Francisco Mignone. The purpose of this document is to provide performance practice guidelines for four selected pieces by Francisco Mignone: No Meio do Caminho (1938), Pregão (1947), Si eu sei o que é saudade (1976), and Valsa-Vocalise (1972). They exemplify expressions of Brazilian national identity through the music selected. Furthermore, it provides a brief background on the composer and his compositional style phases, and context for the …

Photoassisted Nanoscale Memory Resistors, Amir Shariffar

Graduate Theses and Dissertations

Memristors or memory resistors are promising two-terminal devices, which have the potential to revolutionize current electronic memory technologies. Memristors have been extensively investigated and reported to be practical devices, although they still suffer from poor stability, low retention time, and laborious fabrication processes.

The primary aim of this project was to achieve a device structure of quantum dots or thin films to address a fundamental challenge of unstable resistive switching behavior in memristors. Moreover, we aimed to investigate the effects of light illumination in terms of intensity and wavelength on the performance of the fabricated memristor. The parameters such as …

Investigation On Electrochemical Processes Of P-Aminothiophenol On Gold Electrode Of Nanostructures, Hui-Yuan Peng, Jia-Zheng Wang, Jia Liu, Huan-Huan Yu, Jian-De Lin, De-Yin Wu, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical reactions on nanostructured noble electrodes have received much attention, however, the reaction mechanism and reaction kinetics are still difficult to be studied. Probe molecule can give an insight to the investigation of electrochemical reactions on noble electrodes with nanostructures. In this paper, the electrochemical process of p-aminothiophenol (PATP) adsorbed on the gold electrode was studied by electrochemical cyclic voltammetry and surface-enhanced Raman spectroscopy (SERS). Here, we used one-step sodium citrate reduction method (Frens method) to synthesize gold nanoparticles, which are used to construct the nanostructured gold electrode. The Raman electrolytic cell used was based on the traditional three-electrode electrolytic …

Electrochemical Degradation Of Oxytetracycline Catalyzed By Fe3O4 Magnetic Nanoparticles, Fang Ying, Shan-Shan Xu, Yan-Bing Xu, Miao-Miao Liang, Jian-Feng Li

Journal of Electrochemistry

The purpose of this study is to optimize the electrochemical degradation of oxytetracycline (OTC) in water using a low cost and simple preparation method. In this paper, the Fe₃O₄ magnetic nanoparticles were used as catalysts to activate the electrochemical oxidation system of peroxydisulfates (PDS) which acted as electrolytes to provide active free radicals in order to improve the degradation of OTC under the condition of applying current. As one of the tetracycline antibiotics (TCs), OTC is one of the most used antibiotics in the world, therefore, it is necessary to study the effective degradation of OTC. By …

Preparation Of Pt@Basrtio3 Nanostructure And Its Properties Towards Photoelectrochemical Ammonia Synthesis, Jing Zhang, Rui-Xia Guo, Jian-Jun Fu, Shi-Bin Yin, Pei-Kang Shen, Xin-Yi Zhang

Journal of Electrochemistry

Ammonia is an important industrial raw material and a potential green energy. Using renewable energy to convert nitrogen into ammonia under ambient condition is an attractive method. However, the development of efficient photoelectrochemical ammonia synthesis catalysts remains a challenge. Perovskite such as BaSrTiO₃ (BST) is a good photocatalytic material. However, BST is active under ultraviolet light and has a high recombination rate of photogenerated electron-hole pairs. By dispersing precious metals, it can effectively regulate the absorption of sunlight by BST. In this work, we used a two-step method to prepare BST. The H₂PtCl₆·6H₂O …

Lattice Dynamics, Mechanical Properties, Electronic Structure And Magnetic Properties Of Equiatomic Quaternary Heusler Alloys Crticoz (Z = Al, Si) Using First Principles Calculations, Eesha Andharia, Hind Alqurashi, Bothina Hamad

Physics Faculty Publications and Presentations

First principles calculations are performed to investigate the thermodynamical stability, dynamical, mechanical, electronic and magnetic properties of CrTiCoZ (Z = Al/Si) novel quaternary Heusler alloys. A Y-type III atomic configuration is found to be the most stable structure for both compounds. The lattice constant values obtained using GGA-PBE approach are 5.9368 Å and 5.7853 Å for CrTiCoAl and CrTiCoSi, respectively. Using the value of elastic moduli for both the compounds, the computed Pugh’s ratio value is 2.5 and 2.7 for CrTiCoAl and CrTiCoSi, respectively, which is higher than 1.75, indicating both the compounds are ductile in nature. The melting temperatures …

Alpha Synuclein: A Therapeutic Target And Biomarker For Parkinson’S Disease, Max Chase

USF Tampa Graduate Theses and Dissertations

Parkinson’s Disease is the second most common neurodegenerative disease after Alzheimer’s Disease, and the most common motor disorder. In fact, nearly a third of those with AD have PD. A major hallmark of PD is the appearance of Lewy Bodies, proteinaceous cytoplasm inclusions, that build up and spread throughout the CNS in a prion like fashion. The major component of these Lewy Bodies is a protein called alpha-synuclein. Alpha-syn is a 14kDa protein made of 140 amino acids and found in the presynaptic ends of CNS neurons, acting as a chaperone and regulator. The protein is also found in the …

Stability Analysis Of Delay-Driven Coupled Cantilevers Using The Lambert W-Function, Daniel Siebel-Cortopassi

USF Tampa Graduate Theses and Dissertations

A coupled delay-feedback system of two cantilevers can yield greater sensitivity than that of asingle cantilever system, with potential applications in atomic force microscopy. The Lambert W-function analysis concept for delay differential equations is used to more accurately model the behavior of specific configurations of these cantilever systems. We also use this analysis concept to find parameters which yield stability for greater parameter ranges, of the delay differential equations. The Q factor, or quality factor, is the ratio of energy stored in the system, to the energy lost per fixed oscillation/movement cycle. Having stability of the cantilevers corresponds to the …

Detection Of Trace Heavy Metals In Water: Development Of Electrochemical Sensors, Quang Lam, Joel Mututeke

Symposium of Student Scholars

The presence of heavy metals in our ecosystem poses significant ecological and physiological consequences. As a result, numerous techniques are developed for the detection of contaminants in aqueous solutions. However, early and trace detection of such contaminants still remains a challenge. Amongst many techniques, electrochemistry driven sensors have shown promise due to their possibility of miniaturization and low-cost. Our research investigates the use of electrically conducting polymer and atomically thin carbon materials as electrodes towards the development of electrochemical sensor. Nanocomposite electrode films have been synthesized and fabricated using in-situ polymerization technique and the relationship between number of cycles of …

Block Copolymer Directed Self-Assembly: Exploring The Efficacy Of Applications In Semiconductor Fabrication, Jakin Bryce Delony

USF Tampa Graduate Theses and Dissertations

Over the course of the past 80 years, semiconductor devices have become increasingly ubiquitous in everyday life.From constructing mainframes that encompassed entire rooms during the 1940s, to inventing personal computers in the 1980s, to developing progressively faster smartphones and wearable technology in the 2010s, the primary driving force behind the Digital Revolution has been increasing transistor counts, and thus computing power, via incremental improvements in optical lithography. In 1965, Intel co-founder Gordon Moore boldly predicted that the transistor density of semiconductor devices would double approximately every 18-24 months. While this prediction -- now colloquially referred to as Moore's Law -- …

Ultra-Broadband And Polarization-Insensitive Metasurface Absorber With Behavior Prediction Using Machine Learning, Shobhit K. Patel, Juveriya Parmar, Vijay Katkar, Fahad Ahmed Al-Zahrani, Kawsar Ahmed

Department of Mechanical and Materials Engineering: Faculty Publications

The solar spectrum energy absorption is very important for designing any solar absorber. The need for absorbing visible, infrared, and ultraviolet regions is increasing as most of the absorbers absorb visible regions. We propose a metasurface solar absorber based on Ge₂Sb₂Te₅ (GST) substrate which increases the absorption in visible, infrared and ultraviolet regions. GST is a phase-changing material having two different phases amorphous (aGST) and crystalline (cGST). The absorber is also analyzed using machine learning algorithm to predict the absorption values for different wavelengths. The solar absorber is showing an ultra-broadband response covering a 0.2–1.5 …

Method Of Making Hinged Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A method is provided for fabricating a passive optical sensor on a tip of an optical fiber. The method includes perpendicularly cleaving a tip of an optical fiber and mounting the tip of the optical fiber in a specimen holder of a photosensitive polymer three-dimensional micromachining machine. The method includes forming a three-dimensional microscopic optical structure within the photosensitive polymer that comprises a two cavity Fabry-Perot Interferometer (FPI) having a hinged optical layer that is pivotally coupled to a suspended structure. The method includes removing an uncured portion of the photosensitive polymer using a solvent. The method includes depositing a …