Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 61 - 90 of 16385

Full-Text Articles in Materials Science and Engineering

Electrospinning Of Covalent Organic Frameworks (Cofs) For Adsorption Of Heavy Metal Ions, Samar A. Salim Jul 2026

Electrospinning Of Covalent Organic Frameworks (Cofs) For Adsorption Of Heavy Metal Ions, Samar A. Salim

Nanotechnology Research Centre

This study reported the synthesis, electrospinning, and heavy metal adsorption of covalent organic frameworks (COFs) integrated into poly(methyl methacrylate) (PMMA) nanofibers. COF-1 and COF-2 were synthesized by solvothermal and reflux techniques, respectively, and subsequently incorporated into PMMA via electrospinning with different loadings (0.1%, 0.5%, and 1.0%). The synthesized PMMA_COF nanofibers were analyzed utilizing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS). PMMA_COF nanofibers with fiber diameters of 350-450 nm were obtained. The structural and morphological investigations validated the effective integration of COFs into the PMMA matrix, with COF-1 demonstrating superior dispersion …

Go to article

The Arching Analysis Of Rigid Inclusion System Using Cohesive Fill For Load Transform Platform, Ramy Mohammed Mohammed Khalil, Amr F. Elhakim Jul 2026

The Arching Analysis Of Rigid Inclusion System Using Cohesive Fill For Load Transform Platform, Ramy Mohammed Mohammed Khalil, Amr F. Elhakim

HBRC Journal

Rigid Inclusion System (RIS) is one of the economic systems for improving highly compressible soil by increasing the bearing capacity of foundation soil and reducing settlements. This system consists of a load transform platform (LTP) with or without geosynthetic reinforcement (GR) membrane resting on an arrangement of piles. The LTP redistributes the fill embankment load so that a higher percentage of load is transferred to pile by arching that leads to a reduction in the settlement of the foundation soil. Many analytical, numerical and experimental studies to model arching within LTP using cohesionless fill are summarized. This paper presents an …

Go to article

Effect Of Recycled Water As Mixing And Curing Water, On Concrete Properties, Nagah Mousalem, Sayed Abdelbaky, Hesham Ali Ezz-Eldeen, Ahmed Abdel Hafiz Mahmoud Jul 2026

Effect Of Recycled Water As Mixing And Curing Water, On Concrete Properties, Nagah Mousalem, Sayed Abdelbaky, Hesham Ali Ezz-Eldeen, Ahmed Abdel Hafiz Mahmoud

HBRC Journal

This research aims to study the effect of secondary treated wastewater (STWW) and tertiary treated wastewater (TTWW) in concrete mixing and curing as a complete alternative to fresh water to address the water crisis. The treated wastewater used in the study was collected from two wastewater treatment plants in Orasqualia for STWW and El Shorouk for TTWW, Egypt. Chemical analysis was performed on the collected water samples to verify their compliance with the recommendations of the relevant standards used in concrete production. Physical and mechanical tests were performed on cement paste, mortar and concrete specimens. Some durability characteristic of concrete …

Go to article

Improving Heat Transfer Properties Of Corundum Alumina-Based Nanofluids: A Comprehensive Study On Thermal Conductivity And Characterization, Amri Abdulah, Budi Kristiawan, Wibawa Endra Juwana, Sukarman Sukarman, Khoirudin Khoirudin Jul 2026

Improving Heat Transfer Properties Of Corundum Alumina-Based Nanofluids: A Comprehensive Study On Thermal Conductivity And Characterization, Amri Abdulah, Budi Kristiawan, Wibawa Endra Juwana, Sukarman Sukarman, Khoirudin Khoirudin

HBRC Journal

The thermal conductivity of nanofluids is affected by various factors. Consequently, a comprehensive investigation into nanofluid materials and their thermal conductivity is essential. This study examines Al2O3 samples with three different volume concentrations, 0.5, 0.75 and 1 vol.%, dispersed in a liquid water/ethylene glycol mixture with a volume ratio of EG–W (50:50). Multi-technique characterization was performed using XRD, SEM-EDS, TEM, UV-Visible, and Zeta Potential. Furthermore, thermal conductivity tests were performed on Al2O3 using TEMPOS TEM-1443. The XRD pattern revealed that the Al2O3 nanoparticles possess a trigonal crystal system with a rhombohedral …

Go to article

Divergent Risk Prioritization And Safety Governance In Metro Construction Projects: Evidence From Cairo Metro Line 3, Shrouk M. El Gebaly, Khaled M. Dewidar, Taher M. Elsamni Jul 2026

Divergent Risk Prioritization And Safety Governance In Metro Construction Projects: Evidence From Cairo Metro Line 3, Shrouk M. El Gebaly, Khaled M. Dewidar, Taher M. Elsamni

HBRC Journal

Safety risk management remains a critical challenge in large-scale infrastructure projects, particularly in complex urban metro systems where multiple stakeholders operate under different organizational mandates. While previous research has examined construction safety risks, limited studies have explored how project stakeholders prioritize these risks within the same project environment and how such differences influence safety governance. This study investigates stakeholder risk prioritization in metro construction through a qualitative case study of Cairo Metro Line 3 in Egypt. Data were collected through semi-structured interviews with representatives from three key stakeholder groups: the client organization, consulting engineers, and construction contractors. The data were …

Go to article

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju Jul 2026

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Go to article

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf Jul 2026

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Go to article

Optimization Of Aluminum Coating Deposition Parameters To Enhance The Performance Of Automotive Headlamps, Gulirano Saidakhmedova, Giovanni Maizza Jul 2026

Optimization Of Aluminum Coating Deposition Parameters To Enhance The Performance Of Automotive Headlamps, Gulirano Saidakhmedova, Giovanni Maizza

Technical science and innovation

The paper investigates the influence of the optical characteristics of functional coatings applied to automotive reflectors on vehicle active safety parameters, with a focus on the range and intensity of road illumination. The study examines the mathematical relationship between the maximum luminous intensity of a headlamp, the object detection distance, and the reflection coefficient  of an aluminium layer deposited via vacuum thermal evaporation. The main factors driving the degradation of surface reflectivity (including oxidation, thermal degradation of the base coat, and surface roughness) are analysed. It is demonstrated that a decrease in the reflection coefficient during operation directly impairs the …

Go to article

Thermal And Mechanical Properties Of Zirconium Carbide Manufactured Via Ceramic On-Demand Extrusion, Clare Sabata, Yue Zhou, Jeremy L. Watts, Gregory E. Hilmas Jul 2026

Thermal And Mechanical Properties Of Zirconium Carbide Manufactured Via Ceramic On-Demand Extrusion, Clare Sabata, Yue Zhou, Jeremy L. Watts, Gregory E. Hilmas

Materials Science and Engineering Faculty Research & Creative Works

Zirconium carbide (ZrC) was fabricated by material extrusion additive manufacturing (AM) followed by pressureless sintering at 2000°C for two hours, achieving a relative density of 90.3 %. SEM analysis revealed grains of 4.6 ± 1.8 μm; XRD confirmed single phase ZrC. A stoichiometry of ZrC0.92 was determined by XPS. Four-point flexure testing exhibited a strength of 331.3 ± 57.1 MPa and Young's modulus of 232.8 ± 13.1 GPa. Vickers hardness was 13.6 ± 1.0 GPa and 11.6 ± 0.5 GPa at 4.91 and 9.81 N, respectively. Indentation fracture resistance was 2.9 ± 0.2 MPa⋅m1/2; Griffith analysis confirmed …

Go to article

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett Jul 2026

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The martensitic and magnetic transformations, as well as the mechanical properties, of Ni₂MnAl alloys in as-cast (AC) and heat-treated (HT) conditions were investigated. Magnetic-field-induced strain was evaluated via magnetostriction, with reversible strains of 0.14% and 0.2% achieved in the martensitic phase at 2 K for the AC and HT alloys, respectively. Transformation temperatures and Curie temperatures were determined under constant applied magnetic field, revealing that γ-phase inclusions in the AC microstructure suppress antiferromagnetic domain response, yielding a lower magnetization (∼8.4 emu g⁻¹) compared to the HT alloy (∼13.4 emu g⁻¹). Both alloys exhibited hysteretic behavior in the martensitic state and …

Go to article

Unveiling Corrosion Behavior And Passive Film Performance Of L12-Strengthened Ni28cr15cu8ti8fe26-Xco15+X Multi-Principal Element Alloys, Liran Huang, Zhiqiang Fu, Chenliang Chu, Shiyu Liu, Xiaohui Qin, Yunzhu Shi, Yongxiang Tan, Haiming Wen Jul 2026

Unveiling Corrosion Behavior And Passive Film Performance Of L12-Strengthened Ni28cr15cu8ti8fe26-Xco15+X Multi-Principal Element Alloys, Liran Huang, Zhiqiang Fu, Chenliang Chu, Shiyu Liu, Xiaohui Qin, Yunzhu Shi, Yongxiang Tan, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

L12 precipitates are usually induced into face-centered cubic (FCC) multiple-principal element alloys (MPEAs) to improve their moderate yield strength; however, the precipitation also influences the corrosion resistance. This study investigated the corrosion behavior and passive film performance of a series of L12-strengthened Ni28Cr15Cu8Ti8Fe26-xCo15+x (x = 0, 3, 6, and 9 at.%) MPEAs in 3.5 wt.% NaCl solution. The size and density of the L12 nanoprecipitates were regulated via tuning Fe and Co content. With decreasing Fe/Co ratio, the radii of these nanoprecipitates gradually increased within the …

Go to article

Nb–Zr Interdiffusion In The (Hf,Ta,Ti,Nb)B2–(Hf,Ta,Ti,Zr)B2 High-Entropy Boride System, Ana C. Feltrin, Yue Zhou, Stefano Curtarolo, Gregory E. Hilmas, William G. Fahrenholtz Jul 2026

Nb–Zr Interdiffusion In The (Hf,Ta,Ti,Nb)B2–(Hf,Ta,Ti,Zr)B2 High-Entropy Boride System, Ana C. Feltrin, Yue Zhou, Stefano Curtarolo, Gregory E. Hilmas, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

Niobium (Nb) presents a challenge for achieving homogeneous solid solutions in high-entropy boride and carbide ceramics. In this work, we synthesized (Hf,Ta,Ti,Zr)B2 (Zr-HEB) and (Hf,Ta,Ti,Nb)B2 (Nb-HEB) ceramics by boro/carbothermal reduction, followed by densification via spark plasma sintering (SPS). Diffusion couples were prepared to investigate the interdiffusion behavior of Nb and zirconium (Zr) in these complex systems at temperatures between 2000°C and 2200°C. Aside from Nb and Zr, the other elements exhibited no significant concentration gradient across the diffusion interface. Nb exhibited lower diffusion coefficients ((Formula presented.) Nb = 1.7 x 10−17–1.2 x 10−16 m2 …

Go to article

Direct Ink Writing Of Functional Fiber/Granular Composites, Zhuoyuan Yang Jul 2026

Direct Ink Writing Of Functional Fiber/Granular Composites, Zhuoyuan Yang

Doctoral Dissertations and Master's Theses

Direct ink writing provides a versatile manufacturing route for fabricating functional fiber and granular composites with controlled architecture, tunable interfaces, and customized material distributions. Fiber reinforced composites offer high stiffness, strength, fatigue resistance, and functional anisotropy, while granular composites provide scalable access to particle based structures with high material efficiency and broad resource compatibility. However, the additive manufacturing of these composite systems remains challenging. For fiber based composites, precise control of fiber placement, matrix impregnation, interfacial bonding, and freestanding deposition is difficult to achieve during printing. For granular composites, stable particle flow, controllable packing, binder infiltration, and shape retention are …

Go to article

How Does Competitive Adsorption Between Vma And Pce Influence Yield Stress Of Cement Paste? A Novel Insight From Interparticle Forces And Percolation Threshold, Huamin Sun, Le Teng, Xiaohan Yu, Xin Shu, Zhangli Hu, Jiaping Liu, Kamal H. Khayat Jul 2026

How Does Competitive Adsorption Between Vma And Pce Influence Yield Stress Of Cement Paste? A Novel Insight From Interparticle Forces And Percolation Threshold, Huamin Sun, Le Teng, Xiaohan Yu, Xin Shu, Zhangli Hu, Jiaping Liu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Viscosity modifying admixture (VMA) and polycarboxylate superplasticizer (PCE) are often combined to optimize rheological properties of cement-based materials. However, the competitive adsorption of these complex admixtures can greatly influence rheological properties. Many studies have investigated the variation of yield stress due to competitive adsorption between VMA and PCE; but the mechanisms are not fully understood. This study aims to shed a new light on this question in cement paste systems prepared with low water-to-binder ratios of 0.16–0.30. The competitive adsorption of VMA and PCE was quantitatively assessed using the Total Organic Carbon and Ultraviolet-Visible Spectroscopy measurements. The effect of competitive …

Go to article

Thermal Transport Tuning Via Nanoscale Hierarchical Frameworks For Fe2val Thermoelectric Materials, Apoorva Pradip Joshi Jul 2026

Thermal Transport Tuning Via Nanoscale Hierarchical Frameworks For Fe2val Thermoelectric Materials, Apoorva Pradip Joshi

Dartmouth College Master’s Theses

Waste heat represents a vast, untapped energy resource. Thermoelectric materials offer a promising route to harvest this energy by directly converting thermal gradients into electricity. The Heusler alloy Fe2VAl is a prime candidate for such applications because it is non-toxic and cost-effective. However, its intrinsically-high thermal conductivity severely limits performance. A detailed understanding of thermal transport mechanisms is therefore essential for improving its thermoelectric efficiency. This work examines the effect of atomic disorder on the thermal transport behaviour of Fe2VAl. We use germanium doping to introduce atomic-scale disorder and demonstrate a substantial reduction in thermal conductivity, from 28 W/m-K in …

Go to article

Harnessing Tio2-Based Nanofilaments: A Pathway To Enhanced Optoelectronic Performance In Dye-Sensitized And Perovskite Light Harvesters, Zahraa Ismail, Tarek A. Elmelegy, Hassan Nageh, Sameh Abdellatif Jul 2026

Harnessing Tio2-Based Nanofilaments: A Pathway To Enhanced Optoelectronic Performance In Dye-Sensitized And Perovskite Light Harvesters, Zahraa Ismail, Tarek A. Elmelegy, Hassan Nageh, Sameh Abdellatif

Mechanical Engineering

This study explores the integration of TiO2-based nanofilaments into dye-sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) to enhance their optoelectronic performance. Despite the advancements in one-dimensional lepidocrocite TiO2 nanofilaments, there remains a significant gap in understanding their optical scattering mechanisms and dual applicability in both types of solar cells. We synthesized TiO2 nanofilaments and compared their performance to conventional P25 TiO2 in terms of morphology, electrical, and optical properties. The results indicate that the DSSC utilizing nanofilaments achieved a short-circuit current density of 8.2 mA/cm² and a power conversion efficiency (PCE) of 6.9%, compared to 7.1 mA/cm² and …

Go to article

Compound Role Of Using Advanced Materials And Design Procedures On Improving The Performance Of Baghdad Buildings Facades, Abeer Qasim Jbur Jun 2026

Compound Role Of Using Advanced Materials And Design Procedures On Improving The Performance Of Baghdad Buildings Facades, Abeer Qasim Jbur

Al-Esraa University College Journal for Engineering Sciences

The research idea addresses improving the thermal performance of buildings in Baghdad by selecting and employing facade materials to reduce heat gain and energy consumption associated with cooling in a hot-dry climate. The study discusses the pivotal role of facade materials in interacting with solar radiation, heat transfer, and inward thermal transmittance, as well as their capacity to store and release heat in ways that maintain thermal comfort within architectural spaces and reduce reliance on mechanical cooling systems. A range of traditional materials such as stone, earth, and concrete is presented alongside modern materials like high-performance glass and thermal storage …

Go to article

Current Condition Of The Holy Kadhimiya Shrine Surveying Using A Gpr, Israa Hatem Jun 2026

Current Condition Of The Holy Kadhimiya Shrine Surveying Using A Gpr, Israa Hatem

Al-Esraa University College Journal for Engineering Sciences

This study describes the extensive survey of the Holy Kadhimiya Shrine in Baghdad, Iraq, carried out with the use of a non-invasive geophysical instrument called Ground Penetrating Radar (GPR) to assess the conditions of subsurface and the condition of the infrastructure in the site. The total area of the shrine is 19,575 m2 that was systematically studied with the help of internal measures, satellite imagery and radar profiling. The frequency antennas used for the GPR survey were the 250 MHz, 500 MHz, and 800 MHz which have a penetration depth of 1-15 m. Specialized software packages (Ground Vision, Reexplore …

Go to article

Static Analysis-Based Android Malware Detection (2021–2026): A Systematic Survey And Taxonomy, Ali Hussein Mohammed Ali, Musaab Riyadh Abdulrazzaq Jun 2026

Static Analysis-Based Android Malware Detection (2021–2026): A Systematic Survey And Taxonomy, Ali Hussein Mohammed Ali, Musaab Riyadh Abdulrazzaq

Al-Esraa University College Journal for Engineering Sciences

Android malware is not only increasing in size and sophistication but is also a challenge to be detected on a large scale. Static analysis is popular due to its ability to detect malware without running applications or tracing run-time events. However, features, datasets, labeling methods, and assessment methodology differ, which makes studying performance difficult. This is a systematic study of 78 peer reviewed articles written between 2021 and 2026 regarding the Android malware detection by static analysis. In each of the studies, the current survey cover the following feature source, feature representation and engineering, learning paradigms, datasets and labeling methods, …

Go to article

Guided Mind Mapping For Enhancing Spatial Thinking In First-Year Architectural Design Studios, Noor Ayad Rashid, Mustafa Kamil Al-Khafaji Jun 2026

Guided Mind Mapping For Enhancing Spatial Thinking In First-Year Architectural Design Studios, Noor Ayad Rashid, Mustafa Kamil Al-Khafaji

Al-Esraa University College Journal for Engineering Sciences

Spatial thinking constitutes a core cognitive ability in early architectural design education, enabling students to interpret, organize, and transform spatial relationships into coherent architectural configurations. Despite its importance, studio practice often indicates that first-year students rely on surface-level representation rather than engaging in structured spatial reasoning, which leads to fragmented compositions and weak spatial coherence. Accordingly, this study investigates the following research question: To what extent can guided mind mapping support the development of spatial thinking in early architectural design studios? A quasi-experimental design was adopted to examine the impact of structured visual–cognitive guidance on students' spatial reasoning. The study …

Go to article

Multiaxial Stress And Deformation Analysis In Mechanical Structures Under Variable Dynamic Loads, Aqeel Naeem Fareed Al-Khafaji Jun 2026

Multiaxial Stress And Deformation Analysis In Mechanical Structures Under Variable Dynamic Loads, Aqeel Naeem Fareed Al-Khafaji

Al-Esraa University College Journal for Engineering Sciences

Piping supports in gas and process facilities in Iraq are routinely exposed to operational vibration and moderate seismic actions, creating multiaxial, variable dynamic loads that are not fully captured by conventional uniaxial, static design checks. Welded brackets, in particular, are prone to local stress concentration and fatigue at weld toes. This study aims to quantify the multiaxial stress and deformation response of a welded steel pipeline support bracket under variable dynamic loading and to assess the implications for structural integrity and design practice. It was demonstrated by the development and validation of a three-dimensional finite element model of a bracket-pipe …

Go to article

Real-Time Adaptive Control Of Machining Parameters In Cnc Milling Using An Ensemble Digital Twin And In-Process Vibration Monitoring For Enhanced Surface Integrity, Ali Qasim Abdulwahid Jun 2026

Real-Time Adaptive Control Of Machining Parameters In Cnc Milling Using An Ensemble Digital Twin And In-Process Vibration Monitoring For Enhanced Surface Integrity, Ali Qasim Abdulwahid

Al-Esraa University College Journal for Engineering Sciences

Achieving consistent surface integrity in CNC milling under varying materials and degraded tool conditions remains a critical challenge because fixed cutting parameters often induce regenerative chatter, accelerate tool wear, and cause surface and subsurface damage. This paper presents an integrated solution that combines an Ensemble Digital Twin (EDT), real-time in-process vibration monitoring, and a hybrid adaptive controller to maintain high surface quality while preserving productivity. The EDT fuses a physics-based milling dynamics model with a recurrent LSTM surrogate through a context-aware meta-learner that weights model outputs by process state (e.g., tool wear, engagement). A compact real-time monitoring pipeline computes a …

Go to article

Evaluation Of Mimo Antenna Configurations For High Data-Rate Systems, Ammar Abdulimam Abbood Jun 2026

Evaluation Of Mimo Antenna Configurations For High Data-Rate Systems, Ammar Abdulimam Abbood

Al-Esraa University College Journal for Engineering Sciences

This paper introduces a new design of cat-shaped antenna in super wideband (SWB) and high data-rate multiple input multiple output (MIMO) systems. The single-element SWB antenna has a wide frequency range of 2.23 GHz up to more than 100 GHz with outstanding bandwidth ratio (BW Ratio = 44.84:1), fractional bandwidth (FBW = 191%), bandwidth dimensional ratio (BDR = 5567) and a peak gain of 9.52 dB. The single antenna was also expanded to 2 × 2 MIMO array to further improve performance on multipath environments. Measurements and simulation show very good results using radiation patterns, isolation, channel capacity loss (CCL), …

Go to article

Enhancement Of Tribological Behavior Of Rotating Bearings Using Advanced Ceramic Compounds Via Thermal Spray Techniques, Amjid Shihab Abdul Jaleel Jun 2026

Enhancement Of Tribological Behavior Of Rotating Bearings Using Advanced Ceramic Compounds Via Thermal Spray Techniques, Amjid Shihab Abdul Jaleel

Al-Esraa University College Journal for Engineering Sciences

Rotating machines constitute the main part of the most important industrial sectors in Iraq such as oil and gas production, power generation, and manufacturing. The harsh operating conditions however, in the form of high temperatures, corrosive agents and abrasive particulates are causes of premature failure of crucial components such as journal bearings. This study examines the improvement of tribological characteristics of normal steel journal bearings using superior ceramic coating using thermal spray. In particular, atmospheric plasma spray (APS) was used to deposit Alumina-Titania (Al2O3–TiO2) and Zirconia (ZrO2)coating on A106 Grade B carbon …

Go to article

Effect Of Nano-Additives On Fracture Toughness Of Engineering Materials: An Experimental Study, Humam Ahmed Awad Jun 2026

Effect Of Nano-Additives On Fracture Toughness Of Engineering Materials: An Experimental Study, Humam Ahmed Awad

Al-Esraa University College Journal for Engineering Sciences

Structural integrity and service life of engineering components is based on fracture resistance. The paper presents an experimental study on the nano-additive that can be added to the locally-produced Iraqi engineering materials in order to enhance their fracture toughness. The research was inspired by the increasing demand in high-performance materials in the main sectors of the country such as infrastructure and energy besides the need to improve the properties of local resources. The tested material systems were two Portland cement composites and epoxy-based polymers. Nano-silica (n-SiO2 nano-alumina (n-Al2O3) and multi-walled carbon nanotubes (MWCNTs) were added …

Go to article

Experimental Study Of The Effect Of Nano-Doping On The Electrical And Thermal Properties Of Organic Semiconductors, Zainab Abdulateef Rashad Jun 2026

Experimental Study Of The Effect Of Nano-Doping On The Electrical And Thermal Properties Of Organic Semiconductors, Zainab Abdulateef Rashad

Al-Esraa University College Journal for Engineering Sciences

This paper has introduced an experimental research case on the impact of nano-doping on electrical and thermal characteristics of organic semiconductor thin-film. The overall goal of the study is to study the effect of controlled addition of nano-dopants on charge transport characteristics and thermal stability that are important criteria in organic electronic device applications. Solution-based deposition was used to produce the thin films at a different concentration of nano-dopant and, systematic electrical and thermal measurements were carried out under controlled laboratory conditions. Electrical characterization showed that there was high improvement of electrical conductivity as the nano-dopant concentration was high, especially …

Go to article

An Intelligent System For Managing High-Priority Vehicle Routing In Smart Cities Using Artificial Intelligence And Spatial Data Analytics, Bahjat Abdulelah Madhloom Jun 2026

An Intelligent System For Managing High-Priority Vehicle Routing In Smart Cities Using Artificial Intelligence And Spatial Data Analytics, Bahjat Abdulelah Madhloom

Al-Esraa University College Journal for Engineering Sciences

In developing metropolises, there is a risk to public safety in addition to the usual traffic jams. Traffic delays can have life-altering effects every second that fire trucks and ambulances are delayed. Large cities like Baghdad, which suffer from haphazard road sealing and incompetent traffic management, are especially affected, creating daily emergency crisis problems. We create a new intelligent routing system for these top priority vehicles in order to solve this life-or-death problem. Our method uses a trained model with real-time spatial information instead of outdated static maps. A Long Short-Term Memory (LSTM) neural network at its core constantly forecasts …

Go to article

Improvement Of Mechanical And Corrosion Properties Of Weld In Stainless Steel In Crude Oil Tank By Using Nano-Fillers, Ali Abdulzahra Shanshoon Jun 2026

Improvement Of Mechanical And Corrosion Properties Of Weld In Stainless Steel In Crude Oil Tank By Using Nano-Fillers, Ali Abdulzahra Shanshoon

Al-Esraa University College Journal for Engineering Sciences

The aim of this study is to investigate the corrosion behavior and mechanical properties of welded steel exposed to gases emitted from crude oil reservoirs. In this study, two types of nanoparticles were used as fillers during welding to improve corrosion and mechanical properties. TiO2 and SiO2 nanoparticles were mixed with soldering oil in four mass concentrations of 0, 1, 2.5 and 5% by ultrasonic bath method and used as filler during the welding process. In order to prepare the samples, plain carbon steel with a thickness of 3 mm was used and they were welded together by …

Go to article

Video Compression Optimization Techniques Using Artificial Intelligence: Review/Review Article, Amal Abbas Kadhim, Wedad Abdul Khuder Naser, Nada Abdulkareem Hameed Jun 2026

Video Compression Optimization Techniques Using Artificial Intelligence: Review/Review Article, Amal Abbas Kadhim, Wedad Abdul Khuder Naser, Nada Abdulkareem Hameed

Al-Esraa University College Journal for Engineering Sciences

Compressing video is an important and essential function in today's multimedia systems as it enables the efficient storage and transmission of large volumes of video data. The proliferation of high-resolution videos that are being used in various application areas such as video streaming, video conferencing, surveillance, and autonomous systems has caused the strong demand for more efficient compression algorithms. This paper presents an in-depth review of video compression techniques with particular focus on AI methods. It also discusses traditional video coding standards including H. 264/AVC, H. 265/HEVC, and AV1, including motion estimation, transform coding quantization entropy coding, and rate-distortion optimization. …

Go to article

Strategic Optimal Design Of Energy Storage Systems For Enhancing Stability And Sustainability In Electrical Distribution Networks, Hayder Abdulhussein Allawi Jun 2026

Strategic Optimal Design Of Energy Storage Systems For Enhancing Stability And Sustainability In Electrical Distribution Networks, Hayder Abdulhussein Allawi

Al-Esraa University College Journal for Engineering Sciences

The paper will provide a multi-objective model of optimizing the strategic placement and size of Battery Energy Storage Systems (BESS) in the Iraqi electrical distribution systems. The power grid of Iraq has deep issues, such as chronic power shortages, extreme grid instability, and astronomical technical and non-technical losses, and they can be up to 50 percent of the power generated. These problems require new solutions that will make the grid more modern and reliable in terms of energy security. The suggested methodology combines a Multi-Objective Particle Swarm Optimization (MOPSO) algorithm and the specific mathematical models of BESS and renewable energy …

Go to article

First Prev Next Last