Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 1 - 30 of 4340

Full-Text Articles in Materials Science and Engineering

Effects Of Ball Milling Duration And Sintering Temperature On Mechanical Alloying Fe3si, Varistha Chobpattana, Chakansin Phoomkong, Peerawat Nutnual, Kritsada Thaengthong, Wanchai Pijitrojana Jan 2054

Effects Of Ball Milling Duration And Sintering Temperature On Mechanical Alloying Fe3si, Varistha Chobpattana, Chakansin Phoomkong, Peerawat Nutnual, Kritsada Thaengthong, Wanchai Pijitrojana

Journal of Metals, Materials and Minerals

Fe3Si is under interest as a ferromagnetic electrode of magnetic tunneling junctions (MTJs). Its crystalline structure is important for achieving high device efficiency. This work focuses on mechanical alloying of 3:1 ratio of 99% pure Fe and Si powder mixtures by ball milling and sintering. The mixtures were ball-milled for various durations up to 20 h. Then, they were sintered from 400°C  to 800°C for 4 h in Ar.  SEM images and particle size analysis show significant reduction in average particle size of the mixtures after ball milling for 20 h. The longer duration of ball milling process promotes powder …

Go to article

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono Sep 2026

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono

Journal of Mechanical Engineering Science and Technology (JMEST)

Water-powered funicular railways are an environmentally friendly mode of transport whose efficiency heavily depends on the principle of gravity. However, their operation is vulnerable to natural wind disturbances that can hinder speed or cause a risk of overturning on steep, curved tracks. This study aims to analyse the influence of funicular car model design on the rolling moment exerted on the rails as the car turns to enter a track branch. The research methodology involves aerodynamic simulations using SolidWorks flow simulation, comparing three body models: WAHYUDI, FUNAERO, and AEROFUN. Simulations were conducted with variations in turn angles (10° to 30°) …

Go to article

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid Sep 2026

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid

Journal of Sustainable Construction Materials and Technologies

The use of precast concrete structures with grouted sleeve (GS) connections has gained significant traction in the acceleration of bridge construction. The plastic hinge length (Lp) is a critical parameter for assessing the seismic performance and deformation capacity of such structural members. The previous study has proposed empirical equations for Lp in monolithic columns; however, a comprehensive understanding of the influential parameters on Lp in precast concrete columns with GS connections remains limited. This study presents a detailed parametric investigation to evaluate the effects of key design parameters on the plastic hinge length of a precast concrete columns with GS …

Go to article

In Silico Analysis Of Momordica Charantia Triterpenoids As Adenosine Monophosphate-Activated Protein Kinase Ligands For Type 2 Diabetes Mellitus Therapy, Anita Dwi Puspitasari Sep 2026

In Silico Analysis Of Momordica Charantia Triterpenoids As Adenosine Monophosphate-Activated Protein Kinase Ligands For Type 2 Diabetes Mellitus Therapy, Anita Dwi Puspitasari

Chimica et Natura Acta

Type 2 diabetes mellitus continues to rise and calls for safe therapeutic leads. This study assessed the potential of triterpenoids from bitter melon (Momordica charantia) as AMP-activated protein kinase (AMPK) ligands at the ATP-binding site through an in silico approach. AMPK (PDB ID: 4QFG) was prepared in YASARA; nine M. charantia triterpenoids and metformin were docked in PLANTS. Redocking of staurosporine validated the protocol (RMSD 0.2376 Å; ≤2.0 Å). Kuguacin J (-89.9934), Karavilagenin B ( 86.4084), and Kuguacin R (-85.8514) yielded lower (more favorable) docking scores than metformin (-56.5325) and interacted with hinge residues (Val96 and Glu94/Glu100). As expected, the …

Go to article

Ecofriendly Synthesis Of Silver Nanoparticles As Antimicrobial Active Agents From Its Cationic Precursors, Abdul Haris Watoni Watoni Sep 2026

Ecofriendly Synthesis Of Silver Nanoparticles As Antimicrobial Active Agents From Its Cationic Precursors, Abdul Haris Watoni Watoni

Chimica et Natura Acta

This review presents a comprehensive survey on the green synthesis of silver nanoparticles from silver nitrate precursor using plant extracts along with their characterization and antimicrobial activity assessment. The synthesis of silver nanoparticles through a green chemistry approach is increasingly in demand because it is environmentally friendly, easy to do, and efficient, especially for the purpose of antimicrobial active ingredients in disinfectant and antiseptic formulas. Green synthesis of silver nanoparticles can be carried out using silver nitrate as a silver precursor and plant extracts as a source of bioreductants and capping agents. The synthesis products are then characterized using UV-Vis …

Go to article

Key Strategies Enabling The Contribution Of Social Infrastructure In Climate-Proofing Cities: An Explorative Case Study Of Rotterdam, The Netherlands, Sara Elgamal, Alaa El.Eashy, Sherif Sheta Sep 2026

Key Strategies Enabling The Contribution Of Social Infrastructure In Climate-Proofing Cities: An Explorative Case Study Of Rotterdam, The Netherlands, Sara Elgamal, Alaa El.Eashy, Sherif Sheta

HBRC Journal

Social infrastructure, as the physical medium for social life in cities, is increasingly being acknowledged for its ability to offer climate-proofing benefits both in times of climate stability and climate disturbances. However, more evidence is needed on how social infrastructure can be deliberately shaped to contribute to climate-proofing cities. Our study addresses this gap through exploring the key strategies which ensure the effective engagement of social infrastructure (SI) in climate proofing cities (CPC). An explorative case study of Rotterdam city is performed, as the city is well recognized as a pioneer in climate resilience through spatial planning. Data sources for …

Go to article

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto Sep 2026

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Renewable energy from lignocellulosic biomass is a promising alternative to fossil fuels. Coconut shell (CS) waste is a favorable precursor for porous carbon due to its high carbon content, abundance, and non-food nature. However, conventional biochar often has limited surface area and catalytic active sites, hindering its effectiveness as a catalyst. While Fe-based modifications are promising, the use of ferric nitrate-assisted activation of coconut-shell-derived porous carbon remains underexplored. This research focused on developing an Fe-doped porous carbon catalyst from CS via ultrasound-assisted impregnation, followed by activation in a tube furnace. CS biochar was produced through pyrolysis at 550 °C and …

Go to article

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao Aug 2026

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao

Journal of Electrochemistry

Seawater electrolyte-based metal-air batteries exhibit great promise for marine energy supply systems. However, conventional statistical analysis methods, though applicable to seawater metal-air battery lifetime prediction, have inherent limitations of insufficient prediction accuracy and large error. Herein, a deep time-series regression framework based on InceptionTime and incorporating prior-biased attention pooling is proposed to construct a nonlinear mapping between electrochemical performance sequences and the discharge termination time of catalysts. Specifically, chronoamperometric profiles are employed to extract long-term stability features, while prior knowledge derived from linear sweep voltammetry is introduced to strengthen the attention weighting over critical potential regions. Under a nested leave-one-catalyst-out …

Go to article

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li Aug 2026

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li

Journal of Electrochemistry

Electrocatalytic nitrate reduction to ammonia (NitRR) represents a sustainable pathway that integrates environmental remediation with the production of high-value ammonia. However, the activity and selectivity of this process are limited by the generation, consumption, and dynamic equilibrium of the key transient intermediate—active hydrogen (*H). Precise modulation of *H necessitates a comprehensive understanding of its behavior, which relies fundamentally on advanced in situ electrochemical characterization techniques. However, a systematic review dedicated to the rational selection and application of in situ electrochemical techniques for the specific characterization of *H in NitRR, with clear definitions of each technique's "detectable targets, quantitative accuracy, and …

Go to article

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang Aug 2026

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang

Journal of Electrochemistry

Developing cost-efficient and durable multifunctional electrocatalysts of hydrogen evolution reaction, oxygen reduction reaction and oxygen evolution reaction is crucial for improving energy conversion efficiency in electrolytic water splitting electrolyzer and advancing rechargeable zinc-air batteries. Polyhedral shaped nanocrystals with well-defined crystal facets represent a type of model catalysts that enables the exploration of structure-activity relationships. However, it is still very challenging to prepare alloy nanocrystals with multiple metal components due to their complicated redox potentials and mixing enthalpy. Herein, we report a rapid microwave-assisted polyol reduction method for syntheses of core-shell Pd@PdPtCu, Pd@PdPtCuNi, Pd@PdPtCuCo and Pd@PdPtCuZn octahedral nanocrystals, and recessed truncated-octahedral …

Go to article

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa Aug 2026

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Go to article

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto Aug 2026

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Go to article

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika Aug 2026

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

Go to article

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto Aug 2026

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto

Journal of Materials Exploration and Findings

Manual shovels still play an important role in construction and agricultural work, selecting the right material is crucial to obtain a shovel body that has structural reliability, ergonomic efficiency, and sustainability. In this study, a method for selecting the most suitable material will be discussed by combining functional analysis (Ashby's material performance index, and the Multi-Criteria Decision Making approach). From the figure of load, material index is formulated as a reference for performance property requirements. Using data from analysis software and qualitative data, eight performance criteria such as durability, corrosion resistance, cost, and environmental impact are then weighted using the …

Go to article

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa Aug 2026

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Go to article

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih Aug 2026

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Go to article

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya Aug 2026

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya

Tanzania Journal of Science

Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive to tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nanostructurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt.%, cured for 7 and 28 days, were evaluated. Notably, the compressive strength increased by 16 % and the flexural strength by 13 % at 0.1 wt.% NOCNF compared to plain concrete …

Go to article

Research Status And Prospects Of Monitoring Technology For Large-Span Cable-Stayed Bridges Based On Machine Learning, Liu Guoliang, Liu Guokun, Yan Donghuang, Wang Wenxi, Wang Qishun Aug 2026

Research Status And Prospects Of Monitoring Technology For Large-Span Cable-Stayed Bridges Based On Machine Learning, Liu Guoliang, Liu Guokun, Yan Donghuang, Wang Wenxi, Wang Qishun

Journal of China & Foreign Highway

Machine learning and intelligent optimization algorithms have been increasingly applied to construction and health monitoring of long-span cable-stayed bridges. Based on the construction history of cable-stayed bridges both domestically and internationally, an overview of the origin and development process of cable-stayed bridges was provided. Firstly, from the perspective of the entire life cycle of bridges, bridge monitoring was divided into construction period monitoring and operation period monitoring. The applications of mainstream construction monitoring methods in large cable-stayed bridge projects were elaborated, and the specific composition of bridge health monitoring systems was clarified. Secondly, the basic principles of several machine learning …

Go to article

65th Annual Rocky Mountain Conference On Magnetic Resonance Aug 2026

65th Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Conference program, abstracts, and information about the 65th annual meeting of the Rocky Mountain Conference on Magnetic Resonance. Held in the Snowbird Resort and Conference Center, Snowbird, Utah, August 2-6, 2026.

Go to article

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser Jul 2026

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser

Journal of Mechanical Engineering Science and Technology (JMEST)

Sugarcane is one of the important commodities in the industry where bagasse fiber as waste is abundantly available.   Sugarcane bagasse fiber has high cellulose, a key element in the utilization of bagasse. Chemical pretreatment is important to prepare the natural fiber before used as composite reinforcement. The purpose of the study is to analyze the thermal degradation of bagasse fiber after being treated using NaOH and TEMPO solution. The manufacturing method was carried out by a series of washing bagasse with distilled water and NaOH solution, subsequently soaking it in 6% NaOH and 2,2,6,6-tetramethylpiperidine-l-oxyl (TEMPO) solution, and conducted oven-dried. Thermogravimetric …

Go to article

In-Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu Jul 2026

In-Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu

Journal of Electrochemistry

Para-aminothiophenol (PATP) is not only a widely-used probe molecule in the field of surface-enhanced Raman spectroscopy (SERS), but also an important model molecule for interfacial reactions, exhibiting distinct photo- and electro-oxidation pathways, so that PATP is selectively activated under different external fields. The evolution of products and intermediates during electrochemical oxidative coupling remains unknown. In this study, we have investigated the dynamic electrochemical oxidation process of PATP on the Au(111) surface using cyclic voltammetry, electrochemical (EC)-SERS, and in situ electrochemical scanning tunneling microscopy (EC-STM). The results showed that PATP forms an unsaturated adsorption coverage on Au(111) in an acidic solution. …

Go to article

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu Jul 2026

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu

Journal of Electrochemistry

Green hydrogen production via alkaline seawater electrolysis offers an environmentally sustainable and potentially cost-effective route to address both energy and climate challenges. Achieving long-term anode stability under complex ionic environments and industrial current densities remains a central bottleneck. Specifically, Ni-based anodes exhibit intense surface reconstruction during the oxygen evolution reaction, necessitating dynamic anti-corrosion strategies. This mini review systematically summarizes reconstruction engineering approaches to develop anti-corrosion Ni-based anodes of alkaline seawater electrolysis across increasingly complex ionic environments from simulated seawater to real seawater: (i) Cl– dominated; (ii) Cl– with co-existing oxyanions, and (iii) Cl–  with co-existing Br– …

Go to article

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang Jul 2026

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang

Journal of Electrochemistry

Mullite-structured oxides exhibit excellent oxygen reduction reaction activity, possess a low thermal expansion coefficient due to their unique crystal structure, and can eliminate the need for a barrier layer and simplify the preparation process as they contain no alkaline earth elements. Thus, they hold great promise as novel cathode materials for solid oxide fuel cells. In this work, a mullite-spinel-structured SmMn2O5-NiMn2O4 (SMO-NMO) composite cathode was one-step synthesized via a solid-liquid composite route, and its in-situ self-assembly enabled good compatibility with the electrolyte without any barrier layer. Characterization results showed that the SMO:NMO = …

Go to article

A Multidimensional Conceptual Framework For Supportive Outdoor Environments In Healthcare Settings, Mona Ali, Dalia A. Beheiry, Rowaida Kamel, Hammam Serageldin Jul 2026

A Multidimensional Conceptual Framework For Supportive Outdoor Environments In Healthcare Settings, Mona Ali, Dalia A. Beheiry, Rowaida Kamel, Hammam Serageldin

HBRC Journal

The integration of supportive outdoor environments (SOEs) in healthcare settings has gained increasing attention for their potential to enhance patient recovery, support staff well-being, and contribute to holistic therapeutic outcomes. This scoping review examines design recommendations for inclusive outdoor environments in healthcare settings that impact user health and experience. Guided by the Joanna Briggs Institute (JBI) framework for scoping reviews, a comprehensive search was conducted across five databases (Google Scholar, PubMed, ScienceDirect, JSTOR, Sage), yielding 697 records. Following screening and applying the inclusion and exclusion criteria, 18 articles were selected for analysis. This scoping review identified consistent evidence linking outdoor …

Go to article

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli Jul 2026

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of ethanol-blended fuel in a standard vehicle can reduce combustion quality, which has an impact on decreasing vehicle performance. At the above 20% blend level, it affects vehicle performance and requires adjustments to engine settings or the Electronic Control Unit (ECU) before use on conventional engines. This study investigates the effect of aftermarket ECU settings on the performance of a 150 cc motorcycle operating on a gasoline-ethanol blend. Four fuel variations were tested: Pertalite (P100), revvo 90 (R100), and 30% ethanol blends (PE30 and RE30). This study analyzes the effects of optimizing injection duration and ignition timing settings …

Go to article

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika Jul 2026

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika

Journal of Mechanical Engineering Science and Technology (JMEST)

The processes of moulding and reinforcing chemical elements have a big impact on the balance of chemical composition in copper-based bearing alloys. This has a direct impact on how well the material works. This study examines Cu–Sn alloys produced via sand casting and Cu–Zn alloys fabricated through permanent mould casting, with the incorporation of nickel, which remains uncommon. The objective was to examine the variations in the equilibrium of the chemical composition and the performance potential of the bearing alloy metal when subjected to different casting techniques and nickel concentrations ranging from 0% to 4%. Some of the methods used …

Go to article

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah Jul 2026

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO2-Al2O3 hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO2-Al2O3 mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Go to article

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly Jul 2026

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Go to article

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa Jul 2026

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Go to article

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch Jul 2026

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Go to article

Next Last