Materials Science and Engineering Commons^™

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2004 Through December 31, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted an NHI Systems Interface Meeting on Dec. 16 and a UNLVRF HTHX Kickoff Meeting on Dec. 17. The purpose of the meetings was to coordinate the FY05 research and development effort of the UNLV Research Foundation portion of the Nuclear Hydrogen Initiative among the DOE, national program technical directors and the UNLVRF collaborators. Collaborators also had the opportunity to discuss their research program plan and update their progress. It was decided that these type of collaboration meetings were very useful and they will be held quarterly at the various collaborator sites. The next meeting will be in March …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead-Alloys Coolant Systems, Yitung Chen

Transmutation Sciences Materials (TRP)

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal lead-alloys (lead or lead-bismuth eutectic) coolant systems. It is widely recognized that the corrosiveness of the lead-alloys is a critical obstacle and challenge for which it can be safely used or applied in the nuclear coolant systems. Active oxygen control technique can promote the formation of the “self-healing” oxide films on the structural material surface, drastically reducing steel corrosion and coolant contamination. Many experiments of steels exposed to flowing lead-alloys have …

Oscillatory Interlayer Exchange Coupling In [Pt/Co]N/Nio/[Co/Pt]N Multilayers With Perpendicular Anisotropy: Dependence On Nio And Pt Layer Thicknesses, Z. Y. Liu, Lanping Yue, D. J. Keavney, Shireen Adenwalla

Materials Research Science and Engineering Center: Faculty Publications

Interlayer exchange coupling has been studied in a series of [Pt( t_Pt Å)/Co(4 Å)]n/NiO( t_NiO)/[Co(4 Å)/Pt( t_Pt Å)]_n multilayers with perpendicular anisotropy. The coupling oscillates between antiferromagnetic and ferromagnetic as a function of t_NiO with a period of ~5 Å, and the oscillatory behavior is related to the antiferromagnetic ordering of the NiO layer. This interlayer coupling between two Co/Pt multilayers is shown to occur domain by domain by magnetic force microscopy imaging. For the strongest antiferromagnetic coupling at t_NiO = 11 Å, an oscillation with a period of ~6 Å is superposed …

Quantum Entanglement Of Anisotropic Magnetic Nanodots, Ralph Skomski, Andrei Y. Istomin, Anthony F. Starace, David J. Sellmyer

Materials Research Science and Engineering Center: Faculty Publications

Anisotropic magnetic nanodots are promising physical realizations of qubits for quantum computing at finite temperature owing to their well-separated low-lying energy levels and scalability. The entanglement of two interacting magnetic nanodots is investigated and shown both analytically and numerically to be resonantly dependent on their interaction strength and on differences in their properties. These results provide criteria for fabricating and coupling magnetic nanodots so that their low-lying eigenstates can be significantly entangled.

The Effects Of Influent Debit On Hydrodynamic Characteristic Of Bojongsoang Facultative Pond: Without Wind Effects, Rositayanti Hadisoebroto, Suprihanto Notodarmojo

Makara Journal of Technology

The Effects of Influent Debit on Hydrodynamic Characteristic of Bojongsoang Facultative Pond: Without Wind Effects. The performance of facultative pond in Bojongsoang WWTP have reported to be unstable. One of the cause of the unstable performance is the hydrodynamic characteristics that not met the criterion. The improper hydrodynamic characteristics are included the existence of dead-zone, the short-circuiting, and the turbulence due to eddy current. The study was to analyze the effect of the influent debit variation on the hydrodynamic characteristics of the pond using mathematical model. The two-dimensional hydrodynamic model was built from two hydrodynamic equations which are continuity and …

Fuel Injection System For One Cylinder Motor Cycle Engine, Bambang Sugiarto

Makara Journal of Technology

Fuel Injection System for One Cylinder Motor Cycle Engine. Fuel injection has been developed for many years. But its common application is limited on car’s engine. With many reason fuel injection systems in motorcycle one cylinder engine has not been widely used yet. Fuel Injection System allows the amount of fuel, injected to be controlled appropriate to engine parameters such as engine speed, amount of air inducted to cylinder, temperature, for each cycle, over the entire engine operating conditions. This fuel injection research is done to find out the Volumetric Efficiency of the intake manifold system, the amount of fuel …

Influence Of Connection Placement To The Behavior Of Precast Concrete Exterior Beam-Column Joint, Elly Tjahjono, Heru Purnomo

Makara Journal of Technology

Influence of Connection Placement to the Behavior of Precast Concrete Exterior Beam-Column Joint. This paper presents an experimental study on the influence of connection placement to the behaviour of exterior beamcolumn joint of precast concrete structure under semi cyclic loading. Four half-scale beam-column specimens were investigated. Three beam-columns were jointed through connection that are placed in beam-column joint region and the forth is connected at the plastic hinge potensial region of the beam. Crack patterns, strength, stiffness and ductility of the test specimens have been evaluated. The test result indicated that all beam-column specimens show good ductility behavior.

Modelling And Simulation Of Packed Bed Catalytic Converter For Oxidation Of Soot In Diesel Powered Vehicles Flue Gas, Mohammad Nasikin, Praswasti P.D.K. Wulan, Vita Andrianty

Makara Journal of Technology

Modelling and Simulation of Packed Bed Catalytic Converter for Oxidation of Soot in Diesel Powered Vehicles Flue Gas. Diesel vehicle is used in Indonesia in very big number. This vehicle exhausts pollutants especially diesel soot that can be reduces by using a catalytic converter to convert the soot to CO2. To obtain the optimal dimension of catalytic converter it is needed a model that can represent the profile of soot weight, temperature and pressure along the catalytic converter. In this study, a model is developed for packed bed catalytic converter in an adiabatic condition based on a kinetic study that …

Optic Properties On Aggase2 Polycristal Fabrication, A. Harsono Soepardjo, I Dewa Made Janusetiawan

Makara Journal of Technology

Optic Properties on AgGaSe2 Polycristal Fabrication. Polycristal AgGaSe2, is compound (I-III-VI2) a semiconductor as basic material for thin film for solar cell. Polycristal was succesfully grown using Bridgmann Method, heated on sequential temperature treatment until 850°C and cooled down slowly until room temperature. Results observed were in the form of ingot (bars) with more or less 3 cm length and 13 mm in diameter. By using X-Ray Fefraction, composition obtained of each element (weight %) was Ag = 29,3996 %, Ga = 36,8123 % and Se = 30,29 % while using X-Ray Difraction lattice parameter obtained/calculated a = 4,4112 Å, …

Ab Initio Calculation Of Electronic And Optical Properties Of Beryllium Chalcogenides (Bes, Bese, And Bete) Under The Effect Of Pressure, Aisha Ali Saif Bannan Al-Kaabi

Theses

There are several methods for materials simulation. Ab initio or first principles methods are used to solve the quantum mechanical equation which govern the behavior of a system. Ab initio calculation of the optical and electronic properties of solids is fundamental in solid state physics. APW+lo is used to examine different properties of BeS, BeSe and BeTe. Beryllium compounds show different features in structure under different pressures, and they also show a phase transition from Zinc blende to Hexagonal transitions in II-VI semiconductors. Little is known about the ground state properties of Beryllium Chalcogenides. The aim of this work is …

Stabilization Of Desert Sand Using Water-Borne Polymers, Shihab Wagiealla Abdalla Mohamed

Theses

Soil stabilization is one of the various applications that have benefited from the advances in polymeric materials. In this research, three water-borne polymeric emulsions with different chemical and physical properties were tested as stabilizers for sandy soil.

This study is divided into three parts. In the first part, the performance of the three emulsions in reducing the hydraulic conductivity and improving the mechanical properties of the sand was investigated. Specimens with polymer contents of up to 2 wt. % were prepared using two preparation methods, mixing and spraying. Both types of specimens exhibited a significant improvement in the studied properties. …

Environment Assisted Cracking Of Target Structural Materials Under Different Loading Conditions, Venkataramakrishnan Selvaraj

UNLV Theses, Dissertations, Professional Papers, and Capstones

Martensitic Alloy HT-9 has been tested for its evaluation of stress corrosion cracking resistance in neutral and acidic solutions at ambient and elevated temperatures incorporating smooth and notched cylindrical specimens under constant load and slow strain rate (SSR) conditions. C-ring and U-bend specimens have also been tested for stress corrosion cracking evaluation in the acidic solution. The role of hydrogen on the cracking tendency has been evaluated by cathodic applied potential.

The results of constant load testing enabled the determination of the threshold stress for stress corrosion cracking in susceptible environments. The magnitudes of ductility parameters were reduced with increasing …

Microwave Pretreatment Of Corn Stover For Anaerobic Digestion, Abhishek D. Saxena

Masters Theses

Anaerobic digestion is one of the several technologies used for biomass conversion to electricity or heat. This thesis focused on microwave irradiation of corn stover as a pretreatment for anaerobic digestion, and studies its impact on methane production.

The first run comprised three sets of stover soaked overnight in water, dilute sulfuric acid and dilute acetic acid, and each treated to three different levels of microwave irradiation. The results indicated a high variability in the data of the water set, which showed that there was no clear impact of microwave pretreatment on methane production. The dilute sulfuric acid and dilute …

Stress Corrosion Cracking And Hydrogen Embrittlement Of Martensitic Alloy Ep-823, Mohammad K. Hossain

UNLV Theses, Dissertations, Professional Papers, and Capstones

This investigation is focused on the evaluation of stress corrosion cracking (SCC), localized corrosion, and hydrogen embrittlement (HE) susceptibility of martensitic Alloy EP-823 in neutral and acidic solutions at ambient and elevated temperatures. While no failures were observed in smooth specimens in the neutral solution, failures were noticed in the 90°C acidic solution at constant-load (CL) leading to a threshold stress (O'_th) of 102 ksi. The presence of a notch reduced the O'_th value to 91 ksi in a similar environment. The ductility (%El and %RA), time-to-failure (TTF), and true failure stress (O'_r) were gradually …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry, Morphology, And Surface Preparation: Quarterly Report (October-December 2004), Allen L. Johnson, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

This project has four components:

(1) the fabrication of a materials test apparatus with unique capabilities,

(2) comparative studies of steel corrosion under gas phase conditions comparable to the Lead Bismuth Eutectic (LBE) oxygen control conditions,

(3) isotope labeling studies, and

(4) collaborative efforts with other workers in the field.

Stress Corrosion Cracking Resistance Of Martensitic Stainless Steels For Transmutation Applications, Phani P. Gudipati

UNLV Theses, Dissertations, Professional Papers, and Capstones

The susceptibility of Alloy EP-823 to stress corrosion cracking has been evaluated using smooth and notched cylindrical specimens in neutral and acidic solutions at ambient and elevated temperatures using constant load and slow strain rate testing (SSR) techniques. C-ring and U-bend specimens have also been tested in the acidic solution. The effect of hydrogen on the cracking susceptibility has been evaluated under controlled cathodic potential. While no failures were observed with smooth specimens at constant load, the notched specimens showed failure. The SSR test results indicate that the true failure stress (o'_f), time to failure and ductility parameters …

Failure In Internally Pressurized Bent Tubes, Robin Stevenson, Boon-Chai Ng, Peter Polidoro

Faculty Publications

The analysis and modeling of tube-hydroformed components is more complicated than that employed for sheet-metal panels, due to the lengthier process sequence and variable strain path - from flat-rolled sheet to tube; from straight tube to bent tube; and from bent tube to hydroformed component. These additional process steps make it difficult to determine whether post mortem analyses of tube failure during hydroforming can, and should, be conducted with the same tools and databases as used for simple stampings. To provide a partial answer, the properties of commercially fabricated welded straight tubes were evaluated using a free-expansion internal pressure test …

Effects Of Variable Contact Load On Fretting Fatigue Behavior Of Shot-Peened And Un-Peened Titanium Alloy, Chia-Hawa Lee

Theses and Dissertations

Fretting fatigue occurs between two components in contact under relative motion and reduces fatigue life when compared with plain fatigue. Shot-peening, on the other hand, is the most commonly used cold working process to improve material fatigue resistance in aeronautical industries. Nearly all work accomplished to date has assumed a constant contact load while investigating fretting fatigue. The primary goal of this study was to explore fretting fatigue behavior under constant and variable contact load configurations using both shot-peened and un-peened specimens made up of Ti-6Al-4V alloy. Contact loads were applied with four different frequencies. Applied axial loads were also …

Electrochemical Behaviours Of Hemoglobin-Ddab-Modified Powder Microelectrode And The Application Of The Powder Microelectrode In Determination Of Nitric Oxide, Zhi-Mou Guo, Huan Liu, Jian Chen, Wen-Ting Zhang

Journal of Electrochemistry

The electrochemical behaviours of DDAB-Hb-PME were studied in this paper. The (apparent) surface concentration of Hb was enhanced greatly by using the powder microelectrode (technique). NO reacts with Hb and absorbs on the surface of the modified carbon powder. Therefore, the output of the electrode was enhanced greatly by employing PME with higher reaction surface (area). The sensitivity of DDAB-Hb-PME is 3.1 mA/μmol·L^-1·cm², which is much larger than the values obtained with the traditional electrodes. The detection limit is 9 nmol·L^-1 and the linear response range is 9～100 nmol·L^-1.

Improvement And Its Mechanism Of Storage Performance Of Ni-Mh Battery, Xiao-Feng Li, Li-Ping Ma, Yu-Wan Lou, Feng Li, Bao-Jia Xia

Journal of Electrochemistry

The storage performance of nickel-metal-hydride (Ni-MH) battery was studied by using galvanostatic charge-discharge and cyclic voltammetry. The experimental results indicated that CoOOH could not be completely restored after its being thoroughly reduced at lower potential, which might weaken electric conduction network in the positive electrode and result in fading of electrochemical properties of Ni-MH battery. Addition of nickel powder as a conductive agent into the positive electrode was beneficial to the capacity recovery after storage.

Effect Of Fe3+ Dopen Of Titanium Dioxide Film On Absorption Spectra And Photo Catalysis, Mei-Qun Xiao, Jia-Nian Shen, Moucheng Li, Peng-Fei Wu, Dong Liu, Yu-Juan Zhang

Journal of Electrochemistry

Photo-catalytic titanium dioxide film in nano crystalline has been prepared by electrochemical oxidation process and adding different amount of ferric ion into the electrolyte during the anodic oxidation.The effects of Fe³⁺ dopen on absorption spectra and photo-catalytic of the titanium dioxide films have been studied. It shows that the Fe³⁺ dopen caused the red shife of the absorption edge for the incoming light and exhibited the improved photocatalytic reactivity.

Preparation And Electrochemical Magnesium Insertion Behaviors Of Mgv2O6, Hua-Tang Yuan, Li-Fang Jiao, Jian-Sheng Cao, Xiu-Sheng Liu, Ming Zhao, Yong-Mei Wang

Journal of Electrochemistry

MgV₂O₆ was synthesized by conventional solid-state reaction from MgO and V₂O₅ as starting materials. X-Ray diffraction analysis showed that the prepared sample belongs to the monoclinic structure. Electrochemical magnesium insertion from aprotic electrolytes such as organomagnesium halides into this host was found possible and exhibited charge/discharge circulation.

LicoXNi1-XO2 Cathode Materials Prepared By Electrolysis Of Co And Ni, Jin-Ping Wei, Xin Sun, Xiao-Yu Wang, Xi-Kui Bian, Jin-Ling Zhai, Yan-Jie Yan-Jie

Journal of Electrochemistry

A new electrolytic method was developed to prepare LiCo_xNi_1-xO₂ as a cathode material of lithium-ion battery. Contrary to the traditional method, electrolytic method is a potential method with simple process to industrialization and no pollution. Metal cobalt and nickel were electrolysed in parallel to prepare the precursor of Co_xNi_{1- x}(OH)₂.Different compositional precursors could be conveniently prepared by changing electrolytic current. The LiCo_0.3Ni_0.7O₂ cathode prepared by this method was found favorable charge-discharge and cycle properties. For the LiCo_0.3Ni_0.7O₂ cathode material, …

Study On Mass Transport In Liquid Layer Adjacent To The Electrode Through Transmission Vop-Spectroellipsometry, Wei Zhu, Yu-Ru Yang, Zong-Qing Huang

Journal of Electrochemistry

In electrochemical system, the mass transport process in liquid layer adjacent to electrode is studied through theoretical analysis only.The diffusion process can be analyzed theoretically by Fick's law for homogeneous media. Up to now, none of satisfied experimental method has been reported for studying mass transport of a whole process in liquid media yet. This paper described the experimental approach to explore mass transport in electrochemical system by transmission Vop-spectroellipsometry briefly.

Studies On The Electrochemical Preparation And Electrochemical Properties Of Conducting Polymers——Brief Introduction To The Research Work Of Electrochemistry Of Conducting Polymers In Cas Key Laboratory Of Organic Solids(I), Yong-Fang Li

Journal of Electrochemistry

Conducting polymers have drawn much attention since the discovery of conducting polyacetylene in 1977, due to the novelty and curiosity of their structure and properties as well as their promising applications in many aspects. Among the studies of conducting polymers, the electrochemical preparation and electrochemical properties of conducting polymers are of special importance, because the electropolymerization is a main method for preparing conducting polymer films and the electrochemical properties are the basis for their applications in the fields of electrode materials for batteries, electrocatalysis, electrochromic display, etc. We are one of the earliest research groups in the world to perform …

Electrochemical Investigations On Pitting Susceptibility Of Iron-Based Alloy, Wei-Shan Li, Hong-Yu Chen, Zhong-Zhi Yuan, Hong Li, Qi-Ming Huang, Dong-Sheng Lv

Journal of Electrochemistry

The formation process of passive film on iron and electronic properties and pitting susceptibility of an iron-based alloy are investigated by using linear potential sweep, alternative current impedance and electrochemical nose technologies. The relationship between reciprocal square capacitance and potential following the Mott-Schottky behavior is limited at a narrow rang of low potentials. At higher potentials, linear relationship between reciprocal capacitance and potential is obtained, which is ascribed to the increasing thickness of the passive film with potential. The donor density of the passive film is influenced by the formation potential of the film, passivator and microstructure. The decrease in …

Preparation And Photo-Catalyst Properties Of The α-Fe2O3-Tio2 Films On Sodium Alginate Polymer, Li-Qin Chen, Huai-Zhen Zhong, Ri-Yao Chen, Xi Zheng, Zhen Chen

Journal of Electrochemistry

Three new nano thin films of α-Fe₂O_3, TiO₂ and α-Fe₂O₃-TiO₂ by doping their powder with sodium alginate polymer were prepared. Surface structure and catalytic activities of the films were characterized by FTIR, XRD, PL, TEM and I-V techniques. The results of UV-visible absorption showed that the methylene blue was mineralized in aqueous of α-Fe₂O₃/SA, TiO₂/SA and (α-(Fe₂O₃))-TiO₂ /SA upon radiation with ultra violet light. α-Fe₂O₃ enhanced their photo-decolorized-activities by doping 15% TiO₂.

Applications Of New Activated Carbon Meterials In The Electric Double-Layer Capacitor, Jian-Jun Zhang, Hua Jiang, Jian-Hui Fang, Li-Yi Shi, Ren-He Yin, Yi Wen, Ji-Quan Liu

Journal of Electrochemistry

A new type activated carbon whose precursor was coconut shell could be obtained using specific physics-chemistry activation, and the activated carbon was applied as the material of electrode in EDLC (electrical double-layer capacitor),which had a large specific capacitance, and could charge and discharged in some large currents. Carbon dioxide and acid were used to modify carbon,and the effects of post-treatment on surface area and pore volume were investigated. A moulding method which has influence on some properties of carbon electrode with PTFE additive was researched in the paper.

Electrocatalytic Performances Of Carbon Nanotube Air Electrode For Oxygen Reduction, Feng-Ming Zhao, Chun-An Ma

Journal of Electrochemistry

The air electrodes with different mass ratio of Pt/active carbon or carbon nanotube as catalyst layer material have been prepared. The electrocatalytic performances for oxygen reduction were evaluated by means of polarization curve and electrochemical impedance spectroscopy (EIS). The results disclosed that carbon nanotubes dealt with nitric acid in the catalyst layer had been improved obviously on the electrocatalytic activity. After the surface of carbon nanotube was oxygenated and aggraded with platinum, the catalyst had obviously effects on the electrocatalytic activity. The air electrode with the mass ratio of active carbon to Pt/carbon nanotube in 4∶1 showed better electrocatalytic activity, …

The Investigation Of Bafesi/C Alloy Composite As Anode Materials For Li-Ion Battery, Rui-Xiang Feng, Hua Dong, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

A novel BaFeSi/C composite was prepared by mechanical ball milling, and lithium insertion reactions on the composite electrode were investigated by cyclic voltammetry , charge-discharge measurements, XRD and XPS spectroscopy. It is demonstrated that the capacity retention with indiscernible capacity decas during charge-discharge cycling. The improved cycling ability of the composite is suggested from a cooperative action by inactive FeSi₂ and BaSi₂ matrix and outer graphite shell, which both buffer the volumetric changes of the active Si phase and provide a good connection for electronic and ionic conduction during lithium insertion and extraction processes.