Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 91 - 120 of 16386

Full-Text Articles in Materials Science and Engineering

Solar-Assisted Thermal Integration For Improving Fuel Pumping Efficiency In The Middle Oil Distribution Company – Karbala Depot, Ali Shakir Hial Jun 2026

Solar-Assisted Thermal Integration For Improving Fuel Pumping Efficiency In The Middle Oil Distribution Company – Karbala Depot, Ali Shakir Hial

Al-Esraa University College Journal for Engineering Sciences

This paper discusses how a solar-assisted thermal heating system can be incorporated to enhance the efficiency of fuel pumping at the Karbala Fuel Depot which is managed by the Middle Oil Distribution Company in Iraq. The aim of the system is to partially pre-heat diesel before pipeline transfer and hence minimizing losses in pressure caused by viscosity and saving electrical power consumed during pumping operations. The test is a combination of field tests, thermal performance modeling, and thermal flow analysis using CFD to capture the interaction between temperature, fuel rheology and pump load behaviour. It was proven that the stratified …

Go to article

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka Jun 2026

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka

Tanzania Journal of Science

This study reports on CZTS thin films fabricated by sol–gel spin coating using zinc acetate dihydrate, copper acetate dihydrate, tin chloride, and thiourea dissolved in methanol with monoethylamine as a stabilizer. The films were annealed rapidly at 540 °C by using an RTP furnace. Results show the significant influence of zinc concentration on films’ properties with band gap evolution between 1.46 and 1.7 eV, along with high absorption coefficients exceeding 10⁴ cm⁻¹ in the visible range. Structurally, the films evolved from poorly crystalline at low Zn content to well- crystallized, (112)-oriented kesterite near stoichiometry. However, excessive Zn caused slight degradation …

Go to article

Enhancement Of Gas Turbine Efficiency By Using Recuperator And Intercooler Systems, Mohammed Saad Kamil Jun 2026

Enhancement Of Gas Turbine Efficiency By Using Recuperator And Intercooler Systems, Mohammed Saad Kamil

Al-Esraa University College Journal for Engineering Sciences

High power density and operational flexibility make gas turbines an indispensable part of contemporary energy conversion systems. However, in the simple cycle configuration, the thermal efficiency is generally low because the exhaust heat loss is large and the compression work is high. The current investigation is focused on enhancing the thermal efficiency of a gas turbine by the introduction of two augmentation schemes, namely a recuperator and an intercooler. A numerical and thermal simulation study was carried out to model the gas turbine cycle based on the first and second laws of thermodynamics. Simplicity and Modified cycles Performance of simple …

Go to article

Performance Evaluation Of Multi-Stage Compressors And Their Impact On Energy Conversion System Efficiency `A Field Study At Thi-Qar Oil Company', Taha Chyad Thajeel Jun 2026

Performance Evaluation Of Multi-Stage Compressors And Their Impact On Energy Conversion System Efficiency `A Field Study At Thi-Qar Oil Company', Taha Chyad Thajeel

Al-Esraa University College Journal for Engineering Sciences

This paper is a field-based performance assessment of a multi-stage natural gas compressor that is operating in realistic industrial conditions. The data is analyzed using the real operating data taken in a particular oil and gas plant and, therefore, the actual operating data is used to determine the trends of thermodynamic behavior, energy consumption, and efficiency, instead of theoretical or simulation-based assumptions. The analysis was performed phase by phase in order to examine the distribution of pressure ratios, temperature increase and power consumption in the compressor stages. The findings demonstrate that there is a significant difference between the power of …

Go to article

Experimental Analysis Of Thermal - Hydraulic Enhancement In A Shell-And-U-Tube Heat Exchanger Using Copper Foam Baffles, Rawaa Hussein Al-Meammar Jun 2026

Experimental Analysis Of Thermal - Hydraulic Enhancement In A Shell-And-U-Tube Heat Exchanger Using Copper Foam Baffles, Rawaa Hussein Al-Meammar

Al-Esraa University College Journal for Engineering Sciences

Porous metal foams have emerged as a promising medium for thermal management due to their high surface area, low density, and excellent thermal conductivity. This study investigates the effect of copper porous foam baffles with different pore densities (5 and 10 PPI) on the thermal and hydraulic performance of a shell-and-U-tube water–water heat exchanger. An experimental setup was developed to evaluate the Nusselt number, heat transfer coefficient, pressure drop, and friction factor over a range of Reynolds numbers across the annular side. The results revealed that incorporating porous metal foam significantly enhanced heat transfer compared with the smooth-tube configuration. At …

Go to article

Cfd Optimization Using Ansys Fluent For Advanced Thermal Energy Conversion, A Case Study On Heat Recovery Systems In Iraqi Power Plants, Basim Mohammed Abid Ali Jun 2026

Cfd Optimization Using Ansys Fluent For Advanced Thermal Energy Conversion, A Case Study On Heat Recovery Systems In Iraqi Power Plants, Basim Mohammed Abid Ali

Al-Esraa University College Journal for Engineering Sciences

The energy sector in Iraq has lots of potential but the infrastructures are old and lack optimum thermal efficiency resulting in high consumption of fuel and environmental degradation. The study focuses on the urgent necessity of modernization of the thermal energy conversion systems in the industrial plants of Iraq by means of the further development of numerical simulation. The paper applies the Computational Fluid Dynamics(CFD) through ANSYS Fluent to model and optimize a shell-and-tube heat exchanger, which is similar to the ones employed in heat recovery units in Iraqi thermal power plants like the Al-Dora power plant in Baghdad. The …

Go to article

Spatial Estimation For Gas Flaring And Natural Gas Waste From Oil Production Using Remote Sensing And Gis Techniques, Hisham M. Jawad Al Sharaa Jun 2026

Spatial Estimation For Gas Flaring And Natural Gas Waste From Oil Production Using Remote Sensing And Gis Techniques, Hisham M. Jawad Al Sharaa

Al-Esraa University College Journal for Engineering Sciences

This study aims to provide a comprehensive geospatial gas flaring intensity and emission doses analysis throughout oil production areas in Iraq based on remote sensing and GIS-based interpolation methods. Satellite image and spatial data were combined to create a map of flaring locations, refinery locations, and associated CO2-equivalent emissions. The results show that there is a clear spatial variation in the intensity of the emissions ranging from northern regions towards the oil fields in the south near Basra, Rumaila and West Qurna, where refinery density and high flaring activities are observed. Interpolation modelling suggests that the majority of …

Go to article

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot Jun 2026

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R2 > 0.997). The …

Go to article

Adaptive Modulation Techniques To Enhance Ofdm System Performance, Alaa Aqeel Mohammed Jun 2026

Adaptive Modulation Techniques To Enhance Ofdm System Performance, Alaa Aqeel Mohammed

Al-Esraa University College Journal for Engineering Sciences

The fourth-generation (4G) mobile communication is supposed to combine a broad coverage of services, including high-speed data, video streaming, multimedia applications and voice transmission, into a single scale. Adaptive OFDM (AOFDM) is among the most popular techniques proposed to meet this objective in which the settings of the transmission are dynamically optimized to the prevailing changing conditions of the channel fading. This paper is concerned with the adaptive modulation in OFDM. We find out the performance of un-coded adaptive modulation on the schemes of QAM and PSK. An effort to use convolutional coding is also integrated into the structure of …

Go to article

Design And Development Of Solar-Powered Water Desalination Systems, Salam Ali Hassoon Alabooda Jun 2026

Design And Development Of Solar-Powered Water Desalination Systems, Salam Ali Hassoon Alabooda

Al-Esraa University College Journal for Engineering Sciences

Background: Freshwater scarcity and growing energy demand have promoted interest in sustainable desalination technologies, particularly in arid areas like Iraq which has high solar resource and decentralized water supply becomes a key factor. Aim: The purpose of this study was to design and test a solar powered water desalination system that could enhance fresh water productivity, thermal efficiency and quality of water under the climatic conditions of Iraq. Methodology: It was designed as hypothetical pilot-scale system that comprised of a single-slope solar still combined with a flat-plate solar collector, a 200 W photovoltaic-driven circulation pump and 18 kg of phase …

Go to article

Comparative Adsorptive Performance Of Clinoptilolite, Purolite, And Mesoporous Carbon (Cmk-3) For Heavy Metals And Hydrocarbons Removal From Real Petrochemical Effluent, Eynas Muhamad Majeed, Nuha Muhsen Ali Jun 2026

Comparative Adsorptive Performance Of Clinoptilolite, Purolite, And Mesoporous Carbon (Cmk-3) For Heavy Metals And Hydrocarbons Removal From Real Petrochemical Effluent, Eynas Muhamad Majeed, Nuha Muhsen Ali

Al-Esraa University College Journal for Engineering Sciences

Petrochemical activities result in the generation of effluent that contain highly toxic heavy metals and oil products, which are very hazardous to the environment. The research tries to examine the adsorption capacity of three materials synthetic clinoptilolite, synthetic Purolite, and synthesized mesoporous carbon (CMK-3) in the removal of Ni2+, Cd2+, Pb2+, benzene, and toluene present in real refinery effluent obtained at Al-Dora Refinery in Iraq (Baghdad). The experiments were carried by batch adsorption that investigated the equilibrium behavior, kinetic performance, and the influence of ionic strength and organic co-contaminants. The heavy metal adsorption was …

Go to article

The Impact Of Architectural Form On Seismic Performance Of Buildings, Durgham Munir Abdul Hadi, Abdullah Saadoon Salman, Lahib Ali Abdul Hussein Jun 2026

The Impact Of Architectural Form On Seismic Performance Of Buildings, Durgham Munir Abdul Hadi, Abdullah Saadoon Salman, Lahib Ali Abdul Hussein

Al-Esraa University College Journal for Engineering Sciences

Seismic overall performance of buildings is a important issue in each architectural and structural design, especially in regions exposed to seismic dangers. Despite giant improvements in structural engineering technologies, the function of architectural form stays insufficiently incorporated into layout practices geared toward improving seismic resistance. This look at investigates the effect of the formal dimension of architectural design on the seismic performance of buildings by analyzing key shape-related attributes, namely regularity, symmetry, simplicity, continuity, and slenderness. An analytical–descriptive method is followed, based totally on an extensive evaluation of applicable literature and the assessment of architectural configurations with regards to their …

Go to article

Quality Of Life Indicators In Historic Urban Spaces: A Case Study Of Al-Mustansiriya Madrasa, Baghdad / Iraq, Israa H. Karam Ali, Shireen I. Khazaal Jun 2026

Quality Of Life Indicators In Historic Urban Spaces: A Case Study Of Al-Mustansiriya Madrasa, Baghdad / Iraq, Israa H. Karam Ali, Shireen I. Khazaal

Al-Esraa University College Journal for Engineering Sciences

Historic urban spaces play a central role in shaping social interaction, environmental comfort, and collective identity in cities with deep cultural heritage. Despite this importance, empirical assessments of their performance in terms of Quality of Life (QoL) from the perspective of contemporary users remain limited, particularly in the context of Baghdad. This study examines Quality of Life indicators within a historic urban space through a case study of Al-Mustansiriya Madrasa, one of Baghdad's most prominent historic educational complexes. A descriptive–analytical approach was adopted, integrating a structured questionnaire survey, systematic on-site observation, and spatial analysis based on Space Syntax techniques. The …

Go to article

Interaction Design In Museum Architecture: A Contemporary Developmental Vision For The Iraqi Museum, Afaf Abdel Sahib Mohammed, Enas Salim Abdulahaad Jun 2026

Interaction Design In Museum Architecture: A Contemporary Developmental Vision For The Iraqi Museum, Afaf Abdel Sahib Mohammed, Enas Salim Abdulahaad

Al-Esraa University College Journal for Engineering Sciences

The Iraqi Museum's remaining architectural form and traditional display techniques do not allow for enough interaction between visitors and the items, despite the museum's great heritage and cultural value. This between visitors and the exhibits. Additionally, the museum does not include interactive technologies and contemporary architecture, which are now essential components of modern museums around the world.This invites the question of how to optimize the Iraqi Museum's visitor experience by applying the principles of interaction design in museum architecture within a contemporary developmental vision. In order to revive the architectural spaces within the Iraqi Museum, the research aims to generate …

Go to article

Experimental Analysis Of Diesel Engine Combustion Chamber Performance Using Field Measurements At The State Company For Heavy Engineering Equipment, Mohammed Kanaan Sedeeq Jun 2026

Experimental Analysis Of Diesel Engine Combustion Chamber Performance Using Field Measurements At The State Company For Heavy Engineering Equipment, Mohammed Kanaan Sedeeq

Al-Esraa University College Journal for Engineering Sciences

The current paper provides a detailed experiment and numerical study of the performance of the combustion chamber of a heavy-duty diesel engine in the common Iraqi industrial conditions at the State Company of Heavy Engineering Equipment (HEESCO). The main goal is to close the difference between what is specified by the manufacturers concerning the performance data, which is usually assumed to be under ideal conditions of the ISO standard, and the real efficiency of operation as witnessed in the field. The methodology is based on a hybrid approach that combines direct field measurements of in-cylinder pressure, temperature and fuel flow …

Go to article

An Ai And Iot Framework For Dynamic Optimization And Sustainability In Smart Cities, Zeinab E. Ahmed, Rashid A. Saeed, Salah Hagahmoodi, Mamoon M. Saeed, Khalid Hamid, Sally D. Abugasim, Eyman F. A. Elsmany Jun 2026

An Ai And Iot Framework For Dynamic Optimization And Sustainability In Smart Cities, Zeinab E. Ahmed, Rashid A. Saeed, Salah Hagahmoodi, Mamoon M. Saeed, Khalid Hamid, Sally D. Abugasim, Eyman F. A. Elsmany

Al-Esraa University College Journal for Engineering Sciences

Smart cities are emerging as a critical solution for creating more efficient, sustainable, and comfortable urban environments. This transformation is primarily driven by the synergistic integration of the Internet of Things (IoT) and Artificial Intelligence (AI). The IoT provides a pervasive network of connected sensors that collect real-time urban data, while AI serves as the analytical engine that processes this information to optimize city-wide systems. This paper presents a comprehensive framework that leverages this AI-IoT convergence for dynamic optimization to achieve long-term urban sustainability. The framework focuses on enabling intelligent, data-driven decision-making across core urban domains. The discussion and analysis …

Go to article

Optimization Of Bearing Design In Centrifugal Pumps Using Finite Element And Experimental Methods: Application At South Refineries Company, Basra, Mohammed Hasab Naser Al-Mtasher Jun 2026

Optimization Of Bearing Design In Centrifugal Pumps Using Finite Element And Experimental Methods: Application At South Refineries Company, Basra, Mohammed Hasab Naser Al-Mtasher

Al-Esraa University College Journal for Engineering Sciences

In the study, nonlinear vibration and thermo-mechanical characteristics of centrifugal pump bearings utilized in the cooling tower system of South Refineries Company (Basra) were properly examined using a combined experimental and numerical method. The intent of the study was to learn the impact of misalignment, the nature of the lubrication film, and thermal gradients on the stability of the operation of these bearings and their service life under realistic industry environment conditions. Finite element model (FEM) was constructed and tested on the basis of real field data obtained at the working pumps that allowed realistic distribution of stress and temperature. …

Go to article

Coupled Multiphysics Transport-Reaction Modeling Framework For Combustion Synthesis Of Cement Phases: Insights Into Β-C2s Formation And Wavefront Dynamics, Sayee Srikarah Volaity, Shubham Agrawal, Aditya Kumar, Narayanan Neithalath Jun 2026

Coupled Multiphysics Transport-Reaction Modeling Framework For Combustion Synthesis Of Cement Phases: Insights Into Β-C2s Formation And Wavefront Dynamics, Sayee Srikarah Volaity, Shubham Agrawal, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Biofuel-based combustion synthesis (BCS) processes offer low-temperature, low-carbon routes to lime and clinker production. However, they involve tightly coupled interactions between heat transfer, gas flow, and sequential solid-state reactions within reactive pellets. Experiments typically provide surface temperature evolution and final phase assemblages but give limited insight into the conversion process and the interaction between composition and process conditions. A coupled transport-reaction framework is developed here to resolve this limitation─the synthesis of β-C2S (belite), a major cementing phase, serving as an example. Transient conservation equations for energy, momentum, and species are solved for a porous pellet exchanging heat and mass with …

Go to article

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang Jun 2026

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li+↔Na+ cationic exchange was used to simultaneously induce Li+ and Na+ cations into the NASICON-type framework of Li3–xNaxZr2Si2PO12 (0 < x < 3). We show that the interpenetration of NaO6 and NaO8 coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Go to article

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang Jun 2026

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)2Cl2, and evaluated their performance in CO2 reduction reaction (CO2RR). The planar CoHAM exhibited dramatically superior CO2RR performance compared to the non-planar Co(phen)2Cl2. Through a series of combined analyses using in-situ …

Go to article

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen Jun 2026

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li+/Na+/K+) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li+ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li+ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na+/K+ ions preferentially enrich at the graphite/binder interface, forming …

Go to article

Study On Deformation Characteristics Of Kaolin Under Dry-Wet And Freeze-Thaw Cycles, Yang Shang, Xiao Dingyuan Jun 2026

Study On Deformation Characteristics Of Kaolin Under Dry-Wet And Freeze-Thaw Cycles, Yang Shang, Xiao Dingyuan

Journal of China & Foreign Highway

In seasonally frozen areas, surface soil is subjected to prolonged and drastic fluctuations in temperature and humidity, causing excessive deformation and resulting in engineering issues such as subgrade settlement and building deformation. The deformation characteristics of kaolin in seasonally frozen areas under the combined influence of freeze-thaw and dry-wet cycles were studied. Through a self-designed experimental setup, experiments with interleaved dry-wet and freeze-thaw cycles were conducted on compacted specimens, and wetting-freezing-thawing-drying cycle experiments were performed to explore the swelling-shrinkage deformation characteristics of kaolin under the combined action of different freeze-thaw and dry-wet cycles. The results indicate that intermittent freeze-thaw cycles …

Go to article

Influence Of Geocell Technical Parameters On Bearing Characteristics Of Highway Subgrades In Oasis Areas, Zhu Chunsheng, Shu Xingyu, Lu Huiyu, Yang Xiaohua Jun 2026

Influence Of Geocell Technical Parameters On Bearing Characteristics Of Highway Subgrades In Oasis Areas, Zhu Chunsheng, Shu Xingyu, Lu Huiyu, Yang Xiaohua

Journal of China & Foreign Highway

To study the effects of technical parameters, such as geocell specifications and laying types, on the bearing capacity and deformation of highway subgrades in oasis flood irrigation areas, the shear properties of plain soil and geocell-reinforced layers with different specifications were studied through large-scale direct shear tests. Based on indoor compression tests and field load tests, numerical simulation parameters, such as the deformation modulus of different foundation soil layers, were calibrated. A numerical model of the geocell-reinforced highway subgrade was established using, and the effects of geocell specifications and laying types on the vertical settlement of the subgrade, the displacement …

Go to article

Study On Effects Of Phase Change Materials On Thermal Erosion Resistance Of Airport Pavement, Li Ping, Li Yunlong, Zheng Zhipeng, Wang Zhijian, Yi Chengxi Jun 2026

Study On Effects Of Phase Change Materials On Thermal Erosion Resistance Of Airport Pavement, Li Ping, Li Yunlong, Zheng Zhipeng, Wang Zhijian, Yi Chengxi

Journal of China & Foreign Highway

To investigate the effect of phase change materials (PCMs ) on improving the thermal erosion resistance of airport pavements and to provide recommendations for selecting optimal PCMs to obtain airport pavements with longer service lives, three PCMs, PCM-G- 98 (A), LB- 2 (B), and TH-HC- 120 (C), were purchased based on literature summaries and market research. Based on microscopic test results and the actual preparation conditions of modified asphalt, PCMs A and B were selected. Subsequently, based on a self-made high-content SBS modified asphalt (S), four groups of composite modified asphalts (S-A- 5, S-A- 10, S-B- 5, and S-B- 10) …

Go to article

Study On Influence Of Elastic Modulus Of Fiber On Compaction Characteristics Of Asphalt Mixtures, Zou Zexi, Luo Kaiyan, Lin Zhiming, Qiu Xiang, Lu Xudong, Yao Xiaoyang, Wang Yaolong Jun 2026

Study On Influence Of Elastic Modulus Of Fiber On Compaction Characteristics Of Asphalt Mixtures, Zou Zexi, Luo Kaiyan, Lin Zhiming, Qiu Xiang, Lu Xudong, Yao Xiaoyang, Wang Yaolong

Journal of China & Foreign Highway

To investigate the influence mechanism of fiber incorporation on the compaction characteristics of asphalt mixtures, six types of typical road fibers (polyester fiber, polyacrylonitrile fiber, aramid fiber, basalt fiber, polypropylene fiber, and polyvinyl alcohol fiber) were selected in this paper, and gyratory compaction tests were conducted based on AC- 20 graded mixtures. The compaction coefficient (a larger compaction coefficient indicates easier compaction) was used as the core evaluation index. The results indicate that the elastic modulus of the fiber is the key influencing factor. When the fiber modulus is 50% lower than the aggregate modulus (such as polyester fiber and …

Go to article

Angularity Evaluation Of Coarse Aggregates Based On Local Feature Extraction Of Point Clouds, Ma Quanzhuo, Feng Ponan, Feng Zezhong, Lei Mingyu, Wang Zhenfeng, Li Jiange Jun 2026

Angularity Evaluation Of Coarse Aggregates Based On Local Feature Extraction Of Point Clouds, Ma Quanzhuo, Feng Ponan, Feng Zezhong, Lei Mingyu, Wang Zhenfeng, Li Jiange

Journal of China & Foreign Highway

The morphological characteristics of coarse aggregates significantly affect the mechanical properties of asphalt mixtures and thus directly influence their road performance and durability. This paper aims to innovatively propose an evaluation method for the angularity of coarse aggregates. A three-dimensional (3D) scanner was used to acquire the surface profile information of coarse aggregates, and local angularity features were extracted through point cloud data analysis. Subsequently, a comprehensive 3D angularity evaluation index for coarse aggregates (A3D) was proposed by combining local normal vectors and curvature characteristics. The results indicate that A3D can be more accurately and independently used for angularity evaluation. …

Go to article

Optimization Design And Experimental Study On Strength Of Ternary Industrial Solid Waste Mixtures, Yang Shu, Ai Yi, Sheng Shanwang, Li Chuangmin Jun 2026

Optimization Design And Experimental Study On Strength Of Ternary Industrial Solid Waste Mixtures, Yang Shu, Ai Yi, Sheng Shanwang, Li Chuangmin

Journal of China & Foreign Highway

This paper aims to explore whether fly ash, lithium slag, and slag powder (ternary industrial solid wastes) can effectively replace cement as cementitious materials for interlocking large-particle crushed stone bases. A uniform design table U9(94) was used to design the test scheme for the mixing ratios of ternary industrial solid waste mixtures; the correlation between the mortar strength and the ternary industrial solid waste mixtures was analyzed by Pearson correlation; with the help of the mathematical statistical software SPSS 26.0, mathematical models for the flexural strength and compressive strength of the ternary industrial solid waste mixture mortar specimens were established. …

Go to article

Calculation Of Tensile Force For Cable-Stayed Buckling Bracket Combined With Temporary Tie Rod Structure Of V-Shaped Pier, Zhao Xiaolu, Yang Guang, Liu Junle, Qiu Zhiwei, Meng Lingxin, Peng Weibing Jun 2026

Calculation Of Tensile Force For Cable-Stayed Buckling Bracket Combined With Temporary Tie Rod Structure Of V-Shaped Pier, Zhao Xiaolu, Yang Guang, Liu Junle, Qiu Zhiwei, Meng Lingxin, Peng Weibing

Journal of China & Foreign Highway

To solve the problem of excessive tensile stress of the cross-section during the cantilever casting process of high piers with inclined legs, a determination method of tensile force based on the linear programming theory and unstressed state control was proposed. Based on the internal force equilibrium method and the principle of influence matrix, the method optimized the tensile force with “stress control as the primary and alignment control as the auxiliary”. The unstressed state control method was adopted for forward iteration, and the effect of tangential displacement between segments was considered to verify the alignment of the inclined legs. Finally, …

Go to article

Analysis Of Influence Of Cable Clamp Slippage On Internal Force And Alignment Of Main Cable, Zhu Kun, Liao Dinghui, Hu Chengze, Shen Heshun, Cao Hongyou Jun 2026

Analysis Of Influence Of Cable Clamp Slippage On Internal Force And Alignment Of Main Cable, Zhu Kun, Liao Dinghui, Hu Chengze, Shen Heshun, Cao Hongyou

Journal of China & Foreign Highway

To investigate the influence of cable clamp slippage on alignment and internal force of the main cable, a theoretical analysis method based on node coordinates of the main cable after cable clamp slippage was proposed in this paper. Based on segmented catenary theory, the influence of hanger inclination caused by hanger slippage on the horizontal force of the main cable was considered. The segmental cable element of the main cable was equivalently expressed as expressions of hanger tension and unstressed length. With total unstressed length kept constant as a control condition, the horizontal force of the main cable was iteratively …

Go to article

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming Jun 2026

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming

Journal of China & Foreign Highway

For negative bending moment prestressed tendons in simply supported-to-structurally-continuous bridges, the flat anchorage method of flange plate is more reasonable, but its widespread application is limited due to the anchoring capacity restrictions of flat anchor plates. To improve the anchoring capacity of a single anchorage zone, reduce the number of prestressed ducts, save concrete, and improve construction efficiency, a novel 6-hole flat anchor plate was developed, designed, and manufactured in this paper. By combining finite element analysis and experimental methods, a finite element analysis model of the concrete load transfer specimen beneath the novel 6-hole flat anchor plate was established, …

Go to article

First Prev Next Last