Materials Science and Engineering Commons^™

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

Sorption And Thermal Conductivity Of Concrete Containing Aggregates Of E-Waste, Rakesh Kumar Saini, Praveen Kumar

Journal of Sustainable Construction Materials and Technologies

In many parts of the world, substantial energy is used to maintain comfortable temperatures in inner parts of the buildings for living and working. Construction materials with low thermal conductivity, if used in the exterior walls and façade etc. in such structures can be useful in lowering the energy demand. On the other hand, moisture ingress through sorption is a common factor contributing in degradation of concrete structures with time. Constituents of concrete may be engineered to some extent to get both the desired attributes, lower thermal conductivity and sorption than normal concrete. The rapid increase in electronic waste, or …

Structural Behavior Of Reinforced Concrete Columns Under Eccentric Loads Strengthened By Steel Jackets Filled With Normal And High-Strength Concrete, Mahmoud Ahmed M. Amin, Mahmoud Mostafa El Hawary, Ahmed Shaheen, Ibrahim M. Mashhour

HBRC Journal

Reinforced concrete (RC) columns are essential structural components in buildings and infrastructure, providing vertical load support and stability. However, these columns can be degraded over time due to various factors, such as environmental exposure, seismic events, and increased loading demands. As a result, the need for effective and reliable column-strengthening techniques arises to ensure the safety, durability, and longevity of structures. The main objective of this study is to investigate how fully strengthening damaged columns affects load-bearing capacity and overall structural performance. Moreover, this study tested thirteen reinforced concrete columns during the experimental program. The original dimensions of these columns …

Effect Of Granite Machine-Made Sand Properties On Concrete Performance, Wang Jiliang, Wei Xinyuan, Yu Bo

Journal of China & Foreign Highway

As an important stone resource in China,granite is widely used in the preparation of machine-made sand and other building materials due to its stable physical properties and favorable mechanical performance.In order to promote the better application of granite in machine-made sand for cement concrete,this paper analyzed the mineral composition,particle grading,and mica content of granite machine-made sand.It systematically summarized the influence of these characteristics on the mechanical properties,durability,and volumetric stability of concrete.The results show that the concrete performance declines with increasing mica and stone powder content in granite machine-made sand.Properly limiting their content can improve the mechanical properties and durability of …

A Review On The Use Of Salt And Sugar As Natural Admixtures In Concrete, Noura A. Yassine, Lelian W. Elkhatib, Adel Elkordi, Mohammed Sonebi, Jamal Khatib

BAU Journal - Science and Technology

Due to the large increase in construction nowadays, the focus on the reduction of waste in the environment and saving cost becomes crucial. This issue, if solved, will conserve natural materials and make an eco-friendly environment. According to this, the use of natural materials, specifically in concrete/mortar, will shape a green and sustainable environment. One of the most used materials in construction is concrete where some additives like accelerators and retarders are added in order to enhance and modify some properties of concrete. These additives are beneficial and important to be used specifically in case of different weather conditions. Weather …

Research Review Of Biomass Ash As Concrete Admixture, Ma Bicong, Liang Jian, Weng Yiling

Journal of China & Foreign Highway

In order to provide a comprehensive overview of research progress in the use of biomass ash as concrete admixture，the physical and chemical properties，mechanism of action，factors affecting the production process of biomass ash，and the effects of biomass ash incorporation on the working properties，mechanical properties，and durability of concrete were studied.The results show that biomass ash has a smaller density and a larger specific surface area than traditional mineral admixture，and the total amount of active components，namely SiO2 + Al2O3 + Fe2O3 （SAF） in most biomass ashes exceeds the requirements of class F volcanic ash （≥70%）.Incorporating biomass ash can effectively improve the mechanical properties …

Concrete Design: Underwater Concrete Forms In A Saltwater Environment, Noah Z. Lau

Construction Management

This following project investigated the effects of salt on the concrete curing process. Concrete possesses numerous strengths, making it extremely versatile. This makes it one of the most utilized construction materials. New improved methods are constantly being developed for concrete’s application as a construction material. While concrete is a flexible material with many strengths, it is not without its flaws. Concrete, while strong in compression is weak in tension. It has long cure times and doesn’t generally handle moisture well. This paper evaluates concrete’s change in strength from letting concrete cure in a salt-based underwater environment. To determine the full …

Research On Performance Of Coal Gangue Concrete, Wang Jiliang, Ma Wenhui, Xu Weidong, Lyu Zhigang

Journal of China & Foreign Highway

Coal gangue is an industrial solid waste produced in the process of raw coal mining.It has a large stock and a relatively low utilization rate.Using coal gangue as concrete aggregate can not only solve the environmental pollution caused by coal gangue storage but also make up for the shortage of natural sand and gravel resources，which opens up an effective way for the large-scale utilization of coal gangue.According to the application characteristics of coal gangue as concrete aggregate，the chemical component，mineral composition，and physical properties of coal gangue were systematically analyzed.The influence of coal gangue as aggregate on the working performance，mechanical properties，volume stability，and …

Experimental Investigation Of The Self-Healing Potential Of Bacteria For Sustainable Concrete Structures Phase 2, Andrea Calabrese, Pitiporn Asvapathanagul, Nisarg N. Patel, Nanubala Dhruvan, Austin Adams, Michael Hernandez, Douglas S. Lopez-Cruz

Mineta Transportation Institute

Concrete is a critical component of so much of the modern construction industry. This material, well known for its versatility, robustness, longevity, and strength, is well-suited for a wide range of structural applications. Nonetheless, the widespread occurrence of cracks in concrete structures, primarily attributed to its limited tensile strength, shrinkage, and overstain, imposes a considerable economic and environmental challenge when it comes to retrofitting these fissures. This study tackles this problem by harnessing bacteria tolerant to high alkaline conditions to enable Microbially Induced Calcium Carbonate Precipitation (MICP) for the self-repair of concrete. This is achieved through an external application method, …

Dynamic Responses Of Super‑Wide Self‑Anchored Suspension Bridge Under Blast Loading, Zhou Guangpan, Lin Zhicheng, Fan Jin, Wang Mingyang

Journal of China & Foreign Highway

To study the dynamic response and damage characteristics of the super-wide concrete self-anchored suspension bridge under the blast loading,a real bridge with these characteristics was selected as the background,and the numerical simulation was used to analyze the dynamic response of the top surface crack shape and the vertical displacement of the bottom plate of the super-wide box girder under the close blast of the bridge deck.Firstly,the refined finite element model of the whole bridge was established by using SolidWorks and HyperMesh.Secondly,the blast loading was applied by Ansys/LS-DYNA and *LOAD_BLAST_ENHANCED (LBE ) method,and the reliability of the calculation method was verified …

Quality Assurance And Quality Control For Reinforced Concrete Inspections, Calvin O. Walters Jr.

Publications and Research

Ensuring the safety and longevity of structures is paramount in concrete construction projects. Cases like the Big Dig ceiling collapse, which occurred on July 10, 2006, when a concrete ceiling panel measuring 20' x 40' and debris weighing 26 short tons (52,000 lb) fell within Boston's Fort Point Channel Tunnel, underscore this importance (Wald, M. L., 2007). Quality Assurance (QA) and Quality Control (QC) are crucial in mitigating such risks. QA ensures that materials and methods meet predetermined performance, design, and reliability standards specified in contracts and customer arrangements. On the other hand, QC is a strategic process businesses use …

Predicting Compressive Strength Of Concrete Incorporating Fly Ash, Blast Furnace Slag, And Superplasticizer Using Machine Learning Techniques, Muhammad Faisal Yaqub

2024 REYES Proceedings

Concrete is the second most essential element in the construction industry, and its strength requirements vary based on the specific conditions of each project. However, determining the compressive strength of concrete involves laboratory tests, which wastes a lot of time and money. Researchers have developed machine learning models that predict the compressive strength of cement-based concrete having various mixes. In this research, the compressive strength of concrete incorporating fly ash, blast furnace slag, and superplasticizer is predicted using different machine learning models, namely, Linear Regression, Random Forest Regression, Decision Tree Regression, Extreme Gradient Boosting, Light Gradient Boosting, AdaBoost, and CatBoost …

Study On Effect Of Nanomodified Additives On Properties Of Concrete Mixtures During Winter Season, Li Yulin, Liang Hongjie, Liang Junlin, Rong Hongliu, Yang Xiaolong

Journal of China & Foreign Highway

To solve the difficult placement of small structures on highways caused by the decreasing workability of cement concrete construction in winter seasons, this paper developed a nanomodified additive to investigate its effect on the performance of cement concrete. Sulfonate naphthaleneformaldehyde (SNF), nanoSiO2, rosin soap (WSR) and sodium nitrate (NaNO3) were formulated into a variety of additives in different ratios and mixing contents to prepare cement concrete, with the fluidity, segregation and compressive strength studied. The results show that the optimal ratio (mass) of nanomodified additives is SNF:0.4%, nanoSiO2:0.1%, WSR:0.05%, and NaNO3:4.0%. The fluidity, segregation and compressive strength of the concrete …

Experimental Study On Mechanical Properties Of Steel-Polypropylene Mixed Fiber Rubber Concrete, Qiu Jiandong

Journal of China & Foreign Highway

Waste rubber materials can be recycled to obtain rubber aggregates, which can be employed in cement concrete products. This paper carried out mechanical performance tests on ordinary concrete and rubber concrete (rubber substitution rate of 20%) with different fiber combinations (doped MS, co-doped PP, and mixed MS-PP), and mainly examined the slump, density, compressive strength, modulus of elasticity, split tensile strength, and rupture strength of the concrete. The results show that the relevant performance indexes decrease significantly after 20% of rubber aggregate is added to the concrete. However, the mechanical performance of ordinary concrete and rubber concrete with the combination …

Influence Of Steel Fiber And Polymer Emulsion On Mechanical Properties And Microstructure Of Concrete, Guo Guanglei, Sun Shiqiang, Li Ying, Zheng Yiwei, Mei Yingjun

Journal of China & Foreign Highway

The microstructure and mechanical properties of concrete were improved by adding steel fiber and polymer emulsion. The working properties and mechanical properties of steel fiber concrete, polymer emulsion-modified concrete, and steel fiber polymer concrete were tested at 3 d, 28 d, and 90 d. Nitrogen adsorption test, mercury injection test, and density method were used to obtain the total pore volume, median pore size, and closed porosity of concrete. The influence of steel fiber and polymer emulsion on the microstructure and mechanical properties of concrete was analyzed. The results show that the compressive strength of concrete after adding steel fiber …

Research And Analysis On Controlled Blasting Demolition Of Continuous Thin‐Walled Box Ribbed Arch Bridge, Ma Shaojun, Chen Huibin, Chai Wendong, Zhang Chunquan, Wang Yuan

Journal of China & Foreign Highway

The 1st bridge of the Jialing River in Pengan County is erected over the Jialing River, a tributary of the Yangtze River. Due to earthquakes and perennial high load operation, the overall technical condition is “Class Ⅴ”, which cannot meet the requirements of the design load grade. This bridge is the longest highway bridge dismantled in Sichuan Province. Its structure is a multi-span continuous thin-walled box ribbed arch bridge. In addition, there are obvious diseases, so the demolition is difficult, and the safety risk is great. For the demolition of the bridge by controlled blasting, numerical simulation, shaped charge cutting …

Research And Analysis On Controlled Blasting Demolition Of Continuous Thin‐Walled Box Ribbed Arch Bridge, Ma Shaojun, Chen Huibin, Chai Wendong, Zhang Chunquan, Wang Yuan

Journal of China & Foreign Highway

The 1st bridge of the Jialing River in Pengan County is erected over the Jialing River, a tributary of the Yangtze River. Due to earthquakes and perennial high load operation, the overall technical condition is “Class Ⅴ”, which cannot meet the requirements of the design load grade. This bridge is the longest highway bridge dismantled in Sichuan Province. Its structure is a multi-span continuous thin-walled box ribbed arch bridge. In addition, there are obvious diseases, so the demolition is difficult, and the safety risk is great. For the demolition of the bridge by controlled blasting, numerical simulation, shaped charge cutting …

The Degradation Of Concrete Tunnel Wall Panels: A Case Study, Christian Paglia

International Conference on Durability of Concrete Structures

Concrete panels are often used along tunnel walls for technical and aesthetic purposes. Generally, the environment in contact with such materials is aggressive. Emission gases from the vehicles, sulphates, chlorides coming from the winter salt spreading, high temperature and humidity promote an acceleration of the deterioration phenomena. In this work 30 years old concrete panels placed along a 16 km long highway tunnel across the Alps were investigated with respect to their durability. The focus was given to the tunnel entrance zone. This region of the tunnel exhibited a critical environment with respect to the durability of the cementitious material …

Production Of Low-Cost Self-Consolidating Concrete (Scc) Using Manufactured Aggregates, Rabab Raydan, Farah Chamseddine, Ali Jahami, Oussama Baalbaki, Jamal Khatib, Adel Elkordi

BAU Journal - Science and Technology

Limitations to the sources of aggregates and the unavailability of sand is becoming a problematic issue for concrete production. A novel technology of manufactured aggregates can produce well graded round aggregates that can substitute natural aggregates while maintaining the same characteristics needed and preserving the resources. Self-Consolidating Concrete (SCC) using manufactured aggregates is assessed in this experimental work to understand the variability of workability properties and mechanical properties with the changes in w/c ratio and percentages of Coarse Aggregates and Manufactured Sand to Natural Sand in order to choose the best mixture that satisfies an adequate overall performance. Targeting compressive …

Evaluating The Effects Of Curing Methods On Bcsa Cement Concrete, Hannah Allen

Civil Engineering Undergraduate Honors Theses

BCSA cement is a type of cement that makes concrete set up much quicker than typical portland cement concrete. BCSA cement concrete also has a much higher compressive strength than that of portland cement concrete. This study was conducted to determine the effect of different curing conditions on the compressive strength of BCSA cement concrete.

Optimizing The Self-Healing Efficiency Of Hydrogel Encapsulated Bacteria In Concrete, Ricardo Hungria

LSU Master's Theses

Calcium carbonate precipitation through microbial means is a promising pathway for concrete self-healing technologies, mainly for its microcrack sealing attributes. The main goal of this project was to study and optimize the crack healing efficiency of hydrogel encapsulated bacteria in concrete. To achieve this purpose, Bacillus pseudiformus was implemented as the bacteria strain at a concentration of 10⁸ cells/ml. This bacterium strain along with yeast extract was combined along with three different mineral precursors corresponding to magnesium acetate, calcium lactate, and sodium lactate. All these three precursors were evaluated at two concentrations (67.76 mM/l and 75 mM/l). For each …

Austenitic, Duplex, And Lean Duplex Stainless Steel Critical Pitting Temperature In Simulated Concrete Environment, Bobby Giebel

Williams Honors College, Honors Research Projects

In this work, the critical pitting temperature (CPT) will be observed for a selection of austenitic (316LN and 24100) and duplex (2205), and lean duplex (2304, 2001) stainless steels in simulated concrete pore solution. To study the influence of temperature on the pitting stability of the stainless steels, three temperatures were tested: 25oC, 45oC, and 65oC for cyclic potentiodynamic polarization (CPP) and electrochemical impedance spectroscopy (EIS). Electrochemical properties of the interfaces we studied via EIS analysis. Kinetics were studied via CPP testing. To reveal the critical pitting temperature of the stainless steels, cyclic thermammetry was used. Characterization of the pits …

New Type Of Lightweight Aggregate For Use In Structural Concrete, Jamal Khatib, Ali Jahami, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

This research studied the utilization of municipal solid waste incineration bottom ash (MSWI-BA) in lightweight coarse aggregate (LWC) production. A special method was followed to prepare the new aggregate to fully replace the normal aggregates (NWA) in concrete. The mechanical properties such as compressive strength, tensile strength, and elasticity modulus were investigated for the LWC concrete. Then, two beams were prepared; one from LWC and the other from NWC. The structural performance of beams made up of lightweight aggregates compared to normal aggregates was investigated. The results showed that this type of aggregates led to a 20% reduction in concrete …

Shear Strength Of Concrete Beams Made With Belitic Calcium Sulfoaluminate Cement, Caleb W. Chesnut

Graduate Theses and Dissertations

The need for a cleaner alternative to portland cement (PC) concrete has led to increasing interest in alternatives to PC. Structural properties of most of these alternative cements are still an open research topic. One promising alternative cement is belitic calcium sulfoaluminate (BCSA) cement. The study presented in this paper investigated the shear strength, long term compressive strength, and carbonation in BCSA cement and PC concrete beams. A total of twelve eight-foot long beams were made; eight BCSA cement concrete beams and four PC concrete beams to be tested at various ages depending on cement type. Two beams of each …

Impact Of Exposure On Thin Epoxy Overlay Performance, Abul Fazal Mazumder

Dissertations

Thin epoxy overlays are used for improving the condition and extending the service life of bridge decks. The tensile bond pull-off strength, evaluated as per the ASTM C1583, is used as the performance indicator. A failure in the substrate with a tensile strength of 250 psi or greater is considered acceptable. However, the performance evaluated on in-service bridge decks shows inconsistent results. Laboratory studies by several researchers documented a distinct performance difference when the overlays are exposed to room temperatures in comparison to elevated temperatures. However, the most influential parameters such as concrete surface profile, thermal compatibility between overlay and …

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

Experimental And Numerical Studies Of Novel Thermal Energy Storage Materials For Applications In Concrete And Energy Storage Systems, Wenyu Liao

Doctoral Dissertations

In this work, several types of novel thermal energy storage (TES) materials and composites are explored, and a series of numerical simulation models and experimental protocols are developed to evaluate the potentials of these materials to be applied in concrete, pavement, and thermal energy storage systems.

The first two types of novel TES materials/composites are at the micro-scale, which use micro diatomite (DE) and cenosphere (Ceno) as carriers of phase change material (PCM), respectively. The third type of novel TES material is at the macro-scale, utilizing lightweight sand (LWS) and lightweight coarse aggregate as carriers to load PCM. The last …

An Investigation Into The Effects Of Fly Ash On Freeze-Thaw Durability Prediction, Yancy Schrader

Graduate Theses and Dissertations

Air is purposefully entrained into concrete primarily to improve resistance to freeze-thaw deterioration while saturated with water. Air entraining admixtures (AEAs) are chemical admixtures designed to entrain air into the concrete to provide adequate resistance to the effects of freezing and thawing. One of the challenges associated with air entrainment in concrete is the interaction of an AEA with supplementary cementitious materials present in the concrete, particularly fly ash. Fly ash is a by-product of the coal fired electrical generation industry, and often contains residual unburned carbon and other components that can increase the AEA demand of a particular concrete …

Fly Ash Based Geopolymer For High Temperature And High Compressive Strength Applications In Aggressive Environment, Aaryan Manoj Nair, Akm S. Rahman

Publications and Research

Geopolymers are the results of geosynthetic reactions between aluminosilicates and strong bases. This results in chemical bonds between aluminum (Al), Silicon (Si)and oxygen (O) composing polymer rings in tetrahedral coordination. These bonds give them widespread useful applications such as high heat bearing ceramics, and base construction material whilst being far more environmentally conscious. The purpose of the experiment is to examine the effect of Silicon Carbide whisker and inorganic glass particles on thermal and mechanical properties of Geopolymers. This study will help understand the effect of various compositions and concentrations of SiO₂ in mechanical strength. In this experiment, the …

Estimation Of Lubrication Layer Thickness And Composition Through Reverse Engineering Of Interface Rheometry Tests, Alexis Salinas, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

During concrete pumping, a lubrication layer is formed near the pipe wall. Extensive research has been performed on measuring and modeling the properties of this layer and using these values to predict pumping pressures. However, there are numerous discussions in the literature about the composition and thickness of this layer: can it be considered mortar, a micromortar, or is it cement paste? In this paper, possible solutions for the thickness and composition of the lubrication layer are derived from interface rheometry tests. It is assumed that the lubrication layer is composed of one or more concentric layers of paste or …