Materials Science and Engineering Commons^™

A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading, Nahla Helmy Matar

Theses and Dissertations

The problem of mixed-mode fatigue crack growth has been a persistent research challenge. The determination of fatigue crack propagation direction directly impacts the safety and integrity of components and structures, making it crucial in various industrial applications, including welded drilling pipes, aerospace, and automotive engineering. Unlike uniaxial loading, mixed-mode cracks tend to change direction frequently (kinking), and nonproportional loading adds to the complexity of the problem. This research aims to estimate the crack propagation direction and fatigue crack life in linear elastic materials subjected to mixed-mode (I+II) loading conditions under proportional or non-proportional cyclic loading. Numerical software was developed based …

The Effect Of Mwcnt-Oil Impregnation Of Sintered Components On Their Wear And Corrosion Resistance, Maha Khaled Abdelfadeel

Theses and Dissertations

Powder Metallurgy (PM) offers an advantageous route for manufacturing complex and near net-shape components. Their inherent interconnected porosity that promotes the action of self lubrication compromises their structural integrity by creating pathways for corrosion and excessive wear. This research investigates the efficacy of Multi-Walled Carbon Nanotubes (MWCNTs) as a nano additive within the impregnating base oil (SN-150 base oil). An experimental matrix was designed to evaluate the influence of MWCNTs with different concentrations of 0.05, 0.1, and 0.2 wt.% and ultrasonic dispersion with varying sonication times of 30 and 60 minutes on the tribological and electrochemical performance of sintered steel …

Tuning Ion Mobility And Molecular Confinement In High-Performance Polymer Electrolytes For Energy Storage, Ezzeldien Yousef Muhammed Yousef

Theses and Dissertations

This research addresses the critical energy density limitations of aqueous supercapacitors, which are traditionally constrained by the narrow electrochemical stability window (ESW) of water 1.23 V. By employing two distinct molecular engineering strategies, this study developed high-performance electrolyte systems that significantly extend voltage stability and thermal resilience.

The first system, CsBr@PAM/HA, utilizes a polyacrylamide and hyaluronic acid hydrogel matrix. This system exploits the chaotropic nature of Cs⁺ ions to disrupt the aqueous hydrogen-bonding network, enhancing ionic conductivity to 104 mS cm^-1. Through systematic salt screening, CsBr was identified as the optimal electrolyte, enabling a stable 2.0 V …

Engineering Nanoelectrocatalytic Systems For Co2 And Nitrate Conversion Into Value-Added Chemicals, Abdelrahman Mohamed Abdelmohsen

Theses and Dissertations

The thesis addresses two major related environmental crises: nitrate pollution of water systems and the ever-increasing levels of atmospheric carbon dioxide. Both challenges are closely linked to anthropogenic disturbance of nitrogen and carbon cycles and require sustainable, energy efficient mitigation techniques. In this study, we investigate electrochemical conversion routes as a unified approach to convert these pollutants into value-added compounds: ammonia (NH3) via nitrate reduction (NO3-RR) and ethylene (C2H4) via carbon dioxide reduction (CO2RR). The first half of this work deals with the design and engineering of Cu-Zn alloy electrocatalysts for efficient NO3-RR. Tuning the alloy composition and surface nanostructure …

Development Of A Novel Innovative Umbrella Falsework System For Concrete Slabs, Abdelazem Hashim

Theses and Dissertations

Formwork is one of the major elements that contribute to the cost and duration of concrete building projects. This is why optimizing such an element can lead to huge savings to all parties involved in the construction projects. With contractors facing huge challenges in such a competitive industry and employers seeking the least price and least duration for their projects, contractors are constantly under the obligations of finding the best alternatives to deliver their projects in terms of both time and money. Therefore, the main aim of this research project is to develop a falsework system, where the falsework system …

Metal-Free Nitrogen-Enriched Graphitic Carbon Nitride Architectures For Advanced Supercapacitor Energy Storage: Design, Synthesis, And Electrochemical Performance Optimization, Loujain Gamal Mohamed

Theses and Dissertations

Abstract

This thesis addresses the urgent global requirement for efficient energy storage materials by developing and characterizing advanced graphitic carbon nitride (g-C3N4)-based electrode materials for supercapacitors. A facile, low-cost thermal polymerization method produces 2D nitrogen-rich GCN nanosheets exhibiting excellent electrochemical stability and wide voltage windows, enabling symmetric devices with 19.33 Wh/kg energy density and remarkable cycling stability over 21,000 cycles. To overcome intrinsic limitations of pristine GCN, a 3D/2D metal free composite with bio-derived carbon (Bio-Cx) is synthesized, delivering high capacitance, wide potential windows, and ultrahigh energy density of 53.72 Wh/kg in asymmetric configurations paired with mesoporous nitrogen-doped carbon (MPNDC). …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Determining The Limitations Of Class F Fly Ash Compared To Class G Cement In Hydrocarbon Wells Application, Youssef Helmy

Theses and Dissertations

Cement is a material commonly used in multiple applications in different industries. Among the industries that uses cement is the oil and gas industry. API (American Petroleum Institute) Class G cement that is the most incorporated form of cement used in the cementation of oil and gas wells to provide several forms of protection and stabilization for the casings. However, Class G cement is contested in terms of efficiency, costs, and environmental awareness against Class F fly ash geopolymers by researchers. This research aims to explore the potential limitations that fly ash geopolymer might have for its use in the …

Partial Replacement Of Ordinary Portland Cement In Concrete By Limestone Calcined Clay (Lc2), Merna Abdelaziz

Theses and Dissertations

Limestone calcined clay (LC2) technique is a new approach that could address the environmental problem corelated with the construction industry due to its vital reliance on the ordinary Portland cement in its various applications. LC2 technique involves partial replacement of the OPC in concrete by limestone and calcined kaolinite clay with a ratio of 1:2 respectively. The main advantage of this technique is its high applicability due to its direct application on site. This study investigated the applicability of incorporating the LC2 technique in the construction industry. Three replacement percentages of OPC by LC2 in concrete were explored, which are …

A Comparative Study Between Soft Structures And Hard Structures For The Protection Of Egypt’S Coastlines Against Climate Change, Donia Eldwib

Theses and Dissertations

Coastal communities worldwide face unprecedented threats from climate change, with rising sea levels, increased storm intensities, and accelerated coastal erosion posing significant risks. Egypt, with over 3,000 kilometers of coastlines along the Mediterranean and Red Seas, it is particularly vulnerable due to its densely populated and economically critical low-elevated coastal zones. With the Mediterranean Sea, and the Nile Delta specifically under huge threats, this study examines the different coastal protection strategies used to address these climate change impacts. Different coastal protection structures have been used throughout the years starting with the well-known hard structures moving on to greener alternatives such …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Thermal Insulation And Fire Protection Plaster For Frp System Incorporating Aerogel Nanoparticles And Phyllosilicates, Athnasious Ghaly

Theses and Dissertations

For more than two decades, new innovative materials have been introduced to the market such as nano materials that can be utilized for their high performance in different aspects of the construction industry. Structural repair and strengthening is one of the most demanding fields in the construction industry for innovative and high-performance materials due to its specialty. Time, quality, economy, and sustainability are the main factors that control this field, and for that, new systems keep being introduced to the market to reduce the time of repair and enhance its efficiency. Fiber Reinforced Polymers (FRP) Systems are the most advanced …

Applicability Of Using Bio-Receptive Concrete For Building Facades In Egypt, Gina Roupheil

Theses and Dissertations

The significant increase in carbon dioxide emissions caused by the construction industry is detrimental to our planet. This is rapidly increasing with the urbanization of cities that is gradually taking its toll on the available green spaces, which help in balancing such emissions. Recently, researchers have been trying to make use of bio-receptivity to create biomaterial systems that could be spread on building envelopes and support the growth of small plant species and microorganisms to establish on. Out of those materials, comes the concrete as a promising material for bio-colonization.

Within this context, this study aims at investigating the applicability …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Degradation Of The Mechanical Properties And Hydrogen Generation In Cement Under Gamma Irradiation Assessed By Atomistic Simulation, Omar Al Najjar

Theses and Dissertations

Although understanding the effect of the gamma-ray on cement-based materials is essential for many applications, such as the concrete contaminate of nuclear reactors or the storage of radioactive waste in cement-based waste forms, such understanding is still not fully developed. The importance of having such an understanding is becoming of utmost importance, especially with calls to extend the lifetime of nuclear power plants, and also due to some recent incidents of failures of the concrete structure in the nuclear fields. In this work, the details of preparing three molecular models as a representative structure of the main binding phase of …

A 3d Imaging-Based Critique Of Wire Arc Additive Manufacturing (Waam) Simulations, Omar Oraby

Theses and Dissertations

Residual stresses play a critical role in the mechanical behavior and structural integrity of engineered components. Understanding and quantifying these stresses are essential for ensuring the reliable performance and durability of materials and structures. Traditionally destructive methods are used that involve sample sectioning and material removal. However, non-destructive methods have gained popularity due to their advantages in preserving the specimen's integrity for further testing and material waste reduction. Among these techniques, Digital Image Correlation (DIC) stands out as a powerful non-contact and full-field measurement approach. DIC captures displacements and strain distributions by analyzing the deformation of speckle patterns on the …

The Effect Of Mechanical Strain On The Electronic Conductivity Of Α- Fe2o3: A Density Functional Theory Study, Sheriff Naziru Abdulmutalib

Theses and Dissertations

Hydrogen has emerged as a promising future energy carrier due to its ability to produce zero carbon dioxide (CO2) emissions when burned. However, the limited natural abundance of hydrogen necessitates the development of cost-effective and environmentally friendly methods for large-scale hydrogen production. Among the different hydrogen production approaches, photoelectrochemical water splitting, which employs a photoanode material in a cell using solar energy to split water into hydrogen and oxygen, is the focus of this work. α-Fe2O3 (hematite) is a photoanode material that shows a promising future for hydrogen generation in a photoelectrochemical cells due to its cheapness, availability, and its …

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

Fabrication & Characterization Of Hybrid Piezoelectric/Triboelectric Nanocomposite Nanogenerators Via Fusion Deposition Modeling, Khaled El Toukhy

Theses and Dissertations

This thesis aims to discuss the potential of using piezoelectric and triboelectric nanogenerators (PTENGs) for energy harvesting, particularly in the sportswear industry. PTENG's main advantage is that it offers good flexibility making it suitable for high-strain applications. The piezoelectric effect is induced by embedding piezoelectric nanofillers into one of the two triboelectric layers. PTENGs can generate both piezoelectric and triboelectric signals when strained resulting in an enhanced output compared to regular piezoelectric nanogenerators (PENGs) and triboelectric nanogenerators (TENGs). TPU was adopted as the matrix for PTENGs advantageous due to their flexibility, low electrical resistivity, and compatibility with additive manufacturing techniques. …

Additive Manufacturing Of Stretchable Strain Sensors: Fabrication, Optimization And Application, John Nady Shihat Bastawrous

Theses and Dissertations

In this project, a novel strain sensor design is fabricated employing different additive manufacturing techniques. The spring sensor's primary material is PLA-Like resin with a nanocomposite encapsulation layer as the functional material. The main principle of Straining the sensors results in a change in resistivity as the distances among the conductive carbon particles change according to the strain applied.

Sensor fabrication consists of two parts: spring manufacturing and development of nanocomposite encapsulation The nanocomposite matrix is developed through the dispersion of Graphene and Carbon nanotubes in Thermoplastic Polyurethane through sonication and magnetic hotplate stirring. While the spring itself is manufactured …

Accurate Evaluation Of The Direction-Dependent Mechanical Properties Of Ideal Single Crystals: A Comparative Ab Initio Study, Jaylan Ali Elhalawani

Theses and Dissertations

The mechanical properties of a single crystal or a grain in a polycrystalline material are highly dependent on the direction of the applied load. Key properties of interest are the Young’s modulus and the Poisson ratio in the small strain limit, and the ideal tensile strength in the large strain regime. Prior atomistic computations of these properties interchangeably used two approaches. In one approach the stress-strain response is explicitly calculated via a numerical tensile test experiment. In the second approach the second order single crystal elastic constants are computed via small deformations and then used in analytical equations to derive …

Polyethersulfone Thin-Film Nanocomposite Membrane Embedded With Amine-Functionalized Graphene Oxide For Desalination Applications, Ahmed Bahaeldin

Theses and Dissertations

Thin-film nanocomposite (TFN) desalination membranes were prepared based on a polyethersulfone (PES) support, where the polyamide (PA) layer was embedded with amine-functionalized graphene oxide (GO). The effect of adding various concentrations of functionalized and un-functionalized GO on the desalination performance, hydrophilicity, and morphology of the membranes was additionally assessed throughout this work. Scanning electron microscopy (SEM) measurements were used to assess the morphology of the membranes in combination with Brunauer-Emmett-Teller (BET) analysis. Contact angle measurements were used to gauge the hydrophilicity of the synthesized membranes. The membrane with the best desalination performance contained 1x10^-3 wt/vol% of functionalized GO in …

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem

Theses and Dissertations

Designing highly active, durable, and nonprecious electrodes for overall water splitting is of urgent scientific importance to realize sustainable hydrogen production. Accordingly, the need to search efficient energy production systems is of crucial necessity. In this thesis, two various systems for sustainable hydrogen production have been reported using electrochemical and photoelectrochemical pathways. In the first part of the thesis, electrochemical water splitting involving both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been established. To this end, an innovative approach is demonstrated to synthesize flower-like 3D homogenous trimetallic Mn, Ni, Co phosphide catalysts directly on nickel foam via …

The Integrated Scheduling Of Flexible Manufacturing Systems Using Petri Net Modeling And Heuristic Searching, Mohammed Mohammed Magdy Mohammed

Archived Theses and Dissertations

No abstract provided.

Energy Efficient Configuration Or Perforated Solar Screens For Residential Desert Buildings, Rasha Arafa

Archived Theses and Dissertations

In hot arid desert environments, the solar radiation passing through windows increases the cooling loads and energy consumption of buildings. Shading of windows can reduce these loads. External perforated wooden solar screens were traditionally used for windowsâ shading. However, there is a lack in understanding their performance in a quantitative manner and unavailability of scientific means that could be used for developing new efficient designs that suit the harsh desert conditions. This thesis investigates the impact of changing screen configurations such as perforation percentage, depth, perforation openings aspect ratio and reflectivity on the energy loads, hence defining the most efficient …

The Effect Of Air-Entraining On Concrete Durability, Jane Magdy Aziz Abadir

Archived Theses and Dissertations

No abstract provided.

Finite Element Modeling Of Superplastic Forming Of High Strength Aluminium Alloys (Weldalite Tm 049), Ihab Farouk Nabil Ragai

Archived Theses and Dissertations

No abstract provided.

Elastic-Plastic Behavior And Limit Load Analysis Of Pipe Bends Under Out-Of-Plane Moment Loading And Internal Pressure, Hashem Mo Mourad

Archived Theses and Dissertations

No abstract provided.

Effect Of Mechanical Systems In Combating The Schistosomiasis Snails, Sherine Ahmed El Baradei

Archived Theses and Dissertations

No abstract provided.

Energy Efficient Configuration Or Perforated Solar Screens For Residential Desert Buildings, Rasha Arafa

Archived Theses and Dissertations

In hot arid desert environments, the solar radiation passing through windows increases the cooling loads and energy consumption of buildings. Shading of windows can reduce these loads. External perforated wooden solar screens were traditionally used for windowsâ shading. However, there is a lack in understanding their performance in a quantitative manner and unavailability of scientific means that could be used for developing new efficient designs that suit the harsh desert conditions. This thesis investigates the impact of changing screen configurations such as perforation percentage, depth, perforation openings aspect ratio and reflectivity on the energy loads, hence defining the most efficient …