Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Universitas Indonesia

Discipline
Keyword
Publication Year
Publication

Articles 1 - 30 of 527

Full-Text Articles in Materials Science and Engineering

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa Aug 2026

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Go to article

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto Aug 2026

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Go to article

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika Aug 2026

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

Go to article

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto Aug 2026

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto

Journal of Materials Exploration and Findings

Manual shovels still play an important role in construction and agricultural work, selecting the right material is crucial to obtain a shovel body that has structural reliability, ergonomic efficiency, and sustainability. In this study, a method for selecting the most suitable material will be discussed by combining functional analysis (Ashby's material performance index, and the Multi-Criteria Decision Making approach). From the figure of load, material index is formulated as a reference for performance property requirements. Using data from analysis software and qualitative data, eight performance criteria such as durability, corrosion resistance, cost, and environmental impact are then weighted using the …

Go to article

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa Aug 2026

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Go to article

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih Aug 2026

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Go to article

Tea Polyphenol-Assisted Green Synthesis Of Silver Nanoparticle-Boron-Doped Diamond Nanoparticles For Theophylline Electrochemical Detection, Prastika Krisma Jiwanti, Adira Ainun Tsalsabilla, Angellita Wijaya Gunawan, Siti Wafiroh, Mohammad Kalimanjaro, Mai Tomisaki Jun 2026

Tea Polyphenol-Assisted Green Synthesis Of Silver Nanoparticle-Boron-Doped Diamond Nanoparticles For Theophylline Electrochemical Detection, Prastika Krisma Jiwanti, Adira Ainun Tsalsabilla, Angellita Wijaya Gunawan, Siti Wafiroh, Mohammad Kalimanjaro, Mai Tomisaki

Makara Journal of Science

Drug theophylline is a bronchodilator used to treat asthma and chronic obstructive pulmonary disease (COPD), but precise monitoring is required to avoid side effects. Therefore, this study aimed to develop a screen-printed electrode (SPE) modified with a composite of green-synthesized silver nanoparticles and boron-doped diamond nanoparticles using tea polyphenols (Ag-BDDTP/SPE) for detecting theophylline. Formation of AgNPs was confirmed by UV-Vis spectroscopy, which showed a localized surface plasmon resonance peak at ~450 nm. Transmission electron microscopy revealed polydisperse nanoparticles with an average diameter of 39.94 nm. During the electrochemical detection of theophylline, square-wave voltammetry (SWV) was employed to evaluate signal-to-background (S/B) …

Go to article

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani Jun 2026

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe0.925Ti0.075O3 (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Go to article

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto Apr 2026

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Go to article

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika Apr 2026

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Go to article

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing Apr 2026

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing

Journal of Materials Exploration and Findings

The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …

Go to article

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause Apr 2026

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause

Journal of Materials Exploration and Findings

The present work focuses on the study of the effect of adding different weight percentages and particle sizes of various metal chips to foundry sand on the tensile strength of aluminum alloy castings, utilizing Taguchi's optimization methodology and regression analysis. Characterization techniques such as X-ray fluorescence (XRF), thermogravimetry, and SEM were also used. The XRF analysis identified aluminum (76.61%), silicon (17.49%), and magnesium (1.28%) as the major elements in the aluminum alloy engine block. For the foundry sand, silicon (89.51%), phosphorus (7.41%), and potassium (1.7%) were found. In contrast, the major constituents in cast iron included iron (88.3%), carbon (3.7%), …

Go to article

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto Apr 2026

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Go to article

Aerodynamics And Heat Transfer In Polymer Blown Film Processing: Experimental And Numerical Investigation, Mohammad Luqman Zulbakri, Nur Atiqah Mat. Rautin, Raa Khimi Shuib, Ku Marsilla Ku Ishak, Auratus Zuratul Ain Abdul Hamid, Mohamad Danial Shafiq, Mohamad Yusof Idroas, Muhammad Khalil Abdullah Dec 2025

Aerodynamics And Heat Transfer In Polymer Blown Film Processing: Experimental And Numerical Investigation, Mohammad Luqman Zulbakri, Nur Atiqah Mat. Rautin, Raa Khimi Shuib, Ku Marsilla Ku Ishak, Auratus Zuratul Ain Abdul Hamid, Mohamad Danial Shafiq, Mohamad Yusof Idroas, Muhammad Khalil Abdullah

Makara Journal of Technology

The effects of airflow dynamics, heat transfer, and mechanical properties on the HDPE blown film extrusion process were examined using a single-lip air ring with a fixed compressed-air valve opening angle of 10°. Reynolds numbers ranging from 9175 to 25911 were analyzed to understand their impact on cooling efficiency, bubble morphology, and film properties. Numerical simulations employing the Standard k−ω turbulence model in ANSYS FLUENT v2023, with mesh refinement achieving y+ ≈ 1, captured detailed flow and heat transfer behavior. Results showed that higher Reynolds numbers significantly enhanced the heat transfer coefficient, with values increasing from 1096 W/m²·K at Reynold …

Go to article

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah Dec 2025

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah

Makara Journal of Science

The effect of Nb addition on the corrosion behavior of U–6Zr alloys within an aerated, demineralized water (DW) environment (pH 5.61) and its correlation of this addition with the mechanical and microstructural properties of the alloys were investigated. The U–6Zr–xNb alloys (x = 1, 4, and 7 wt.%) were synthesized by arc-melting U, Zr, and Nb. Additionally, the samples were mounted and polished, after which they were subjected to electrochemical corrosion analysis using a potentiostat. This evaluation was conducted in a DW medium (pH 5.6), representing an aerated atmosphere, at room temperature (27°C) and a potentiodynamic scan rate of 1 …

Go to article

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi Dec 2025

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Go to article

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara Dec 2025

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Go to article

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara Dec 2025

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Go to article

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan Dec 2025

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Go to article

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab Dec 2025

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Go to article

Antibacterial Activity Of Zno/Geopolymer Composite Granules And Their Potential Application In Water Treatment, Ziyan Tirta Maulitia, Putri Nur Angelina, Pipit Erlita Sari, Sri Sugiarti, Irma Isnafia Arief, Zaenal Abidin Sep 2025

Antibacterial Activity Of Zno/Geopolymer Composite Granules And Their Potential Application In Water Treatment, Ziyan Tirta Maulitia, Putri Nur Angelina, Pipit Erlita Sari, Sri Sugiarti, Irma Isnafia Arief, Zaenal Abidin

Makara Journal of Science

Water pollution has become a major global concern owing to its complexity and widespread impact. Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) are the most common bacterial contaminants in water sources, which pose significant threats to public health. To mitigate water contamination by these pathogenic microorganisms, developing and implementing effective water treatment technologies are essential. A promising approach involves using antibacterial water filtration systems. Herein, zinc oxide (ZnO) nanoparticles were synthesized via hydrothermal and precipitation methods as antibacterial agents for water treatment. These preparation methods required considerably low synthesis time. A capping agent was …

Go to article

Effect Of Contact Time And Concentration On Adsorption Of Pb2+Metal Ion Utilizing Crab Shell Chitosan And Activated Bentonite Clay Composite, Nia Sasria, Adi Wisaka, Ade Wahyu Yusariarta Putra Parmita, Gusti Umindya Nur Tajalla Aug 2025

Effect Of Contact Time And Concentration On Adsorption Of Pb2+Metal Ion Utilizing Crab Shell Chitosan And Activated Bentonite Clay Composite, Nia Sasria, Adi Wisaka, Ade Wahyu Yusariarta Putra Parmita, Gusti Umindya Nur Tajalla

Makara Journal of Technology

Indonesia produced 1,508 tons of nonliving crabs in the January–March 2020 period. The number of shells generated can account for 40%–60% of the overall weight. Therefore, using crab shells made into chitosan is expected to increase the economic value and reduce waste from crab shells. Chitosan can be modified with clay previously activated with an acid solution to form a chitosan–clay composite to improve the adsorption capacity. This study aims to analyze the differences in characteristics between chitosan and clay before and after the immobilization process. A comparison of chitosan and clay (1:2) is conducted on the basis of variations …

Go to article

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi Aug 2025

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Go to article

Design Of A 10-Ton Capacity Solar-Powered Cold Storage At The Cituis Fish Auction Site, Tangerang, Banten, Indonesia, Wardi Wardi, Muhammad Arif Budiyanto Aug 2025

Design Of A 10-Ton Capacity Solar-Powered Cold Storage At The Cituis Fish Auction Site, Tangerang, Banten, Indonesia, Wardi Wardi, Muhammad Arif Budiyanto

Journal of Materials Exploration and Findings

This study presents the design of a 10-ton capacity solar-powered cold storage system for the Cituis Fish Auction Site (TPI) in Tangerang, Indonesia, as a sustainable solution to support the coastal fisheries sector. The system comprises two temperature zones: an anteroom at 5°C and a freezer room at -30°C, both integrated with a hybrid system utilizing solar panels and batteries. The total power consumption of the cooling system reaches 27.51 kW. The simulation results, obtained using HOMER Pro software, indicate that the hybrid PV system can reduce CO2 emissions by up to 16,754 kg per year. From an economic …

Go to article

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto Aug 2025

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto

Journal of Materials Exploration and Findings

This review studying the correlation between microstructural transformations and mechanical properties in reconditioned low-allow steel material, focusing on the impact of Submerged Arc Welding (SAW) parameters, especially current, on microstructure . The study highlights how variation on welding parameters, especially current intensity variation, affecting microstructural transformations, hardness, and wear resistance of hardfaced layers. Key aspects such as dilution effect, phases distribution, and carbide formation are reviewed to understanding their impact on mechanical properties. By reviewing insights from existing literature and experimental findings, this review underscores the role of Submerged Arc Welding in enhancing mechanical properties and microstructural of low-alloy steel …

Go to article

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto Aug 2025

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Go to article

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra Aug 2025

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Go to article

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor Aug 2025

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO2 emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Go to article

Effect Of Sorbitol Plasticizer On Bioplastics Properties Based On Oil Palm Empty Fruit Bunches (Opefb) And Jackfruit Seed Starch, Nia Sasria, Vita Nur Afifah, Gusti Umindya Nur Tajalla Jun 2025

Effect Of Sorbitol Plasticizer On Bioplastics Properties Based On Oil Palm Empty Fruit Bunches (Opefb) And Jackfruit Seed Starch, Nia Sasria, Vita Nur Afifah, Gusti Umindya Nur Tajalla

Makara Journal of Science

In bioplastics, natural materials that are easily decomposed are used to minimize plastic waste. In this research, the compositions used were cellulose from oil palm empty fruit bunches (OPEFB), jackfruit seed starch, and carboxymethyl cellulose (CMC) as a filler with sorbitol as a plasticizer. This study aimed to analyze the effect of a sorbitol plasticizer on bioplastic properties. The study began by extracting jackfruit seed starch and OPEFB cellulose. Subsequently, bioplastics were prepared by varying sorbitol, namely 0 (S – 0), 0.5 mL (S – 0.5), 1 mL (S – 1), and 1.5 ml (S – 1.5), with CMC 20%. …

Go to article

Porous Calcium Carbonate-Poly-2-Acrylamido-2-Methylpropanesulfonic Acid Microspheres Embedded With Silver-Based Nanoparticles As Potential Antibacterial Carriers For Bone Infections, Novi Dwi Widya Rini, Adinda Asmoro, Systi Adi Rachmawati, Husaini Ardy, Akfiny Hasdi Aimon, Akihiro Kishimura, Yoshiki Katayama, Arie Wibowo Jun 2025

Porous Calcium Carbonate-Poly-2-Acrylamido-2-Methylpropanesulfonic Acid Microspheres Embedded With Silver-Based Nanoparticles As Potential Antibacterial Carriers For Bone Infections, Novi Dwi Widya Rini, Adinda Asmoro, Systi Adi Rachmawati, Husaini Ardy, Akfiny Hasdi Aimon, Akihiro Kishimura, Yoshiki Katayama, Arie Wibowo

Makara Journal of Science

Implant-associated infections (IAIs) are a significant complication following orthopedic surgeries and are mainly caused by Staphylococcus aureus. In this study, microspheres based on hybrid calcium carbonate–poly-2-acrylamido-2-methylpropane sulfonic acid (CaCO3-PAMPS) embedded with silver-based nanoparticles (AgNPs) were developed as potential antibacterial drug carriers for IAIs. AgNPs were prepared via a green synthesis approach, which employed Indonesian wild honey as a reducing and capping agent. PAMPS concentrations (0.025%, 0.050%, and 0.075% w/v) and silver ion (Ag+) concentrations in solution (0%, 2.5%, and 4% w/v) were varied. Scanning electron microscopy images showed that samples with 0.050% w/v PAMPS and …

Go to article

Next Last