Materials Science and Engineering Commons^™

Glass Transition Temperature Of Plga Nanoparticles And The Application In Drug Delivery, Guangliang Liu

Dissertations

The glass transition temperature (T_g) of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles plays a crucial role in governing molecular mobility, diffusion, and consequently, drug release kinetics. However, the interaction among residual surfactant, drug effect, nanoscale confinement, and release medium on T_g remains insufficiently characterized. This study aims to bridge this gap by correlating the thermal behavior of PLGA nanoparticles with their drug release behavior under physiologically relevant conditions.

In the present study, PLGA nanoparticles were synthesized using both nano-emulsion and surfactant-free nano-precipitation approaches. The influence of residual surfactants - poly(vinyl alcohol) (PVA) and didodecyldimethylammonium bromide (DMAB) - was systematically …

Self-Assembly Interactions In Magnetite-Coated Cellulose Nanocrystals: Implications For Magnetic Hyperthermia Applications, Mohammad J. Hasan, Erin L. Mcneill, Kishore Chand, Juganta Roy, Monishita Deb, Katherine Schlaak, Sydney Herzog, Yvonne Sun, Sarah Watzman, Esteban E. Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

Magnetic cellulose nanocrystal (MCNC) nanocomposites are promising sustainable and biocompatible platforms for magnetic hyperthermia; however, the molecular mechanisms governing Fe3O4 adsorption and deposition onto CNCs remain poorly understood. Here, sulfated (S-CNC) and TEMPO-oxidized CNCs (T-CNC) were used to prepare nanocomposites at 1:2 and 1:4 CNC:Fe3O4 mass ratios, enabling a systematic evaluation of how surface chemistry and nanoparticle loading dictate interfacial interactions and magneto-colloidal behavior. Bare magnetite nanoparticles were 21 ± 5 nm by TEM but grew to 144 ± 18 in the DLS measurement at pH 7. The S-CNC nanocomposites had hydrodynamic sizes between 144 and 210 nm, not much …

Two-Stage Heat Treatment For Producing Highly Crystalline H-Bn Nanoparticles From Boric Acid And Urea, Sherzod E. Abdurakhmonov, Mastura Kh. Aripova, Umar A. Yakhyaev, Shoxrux B. Naimov, Odiljon E. Abdurakhmonov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of the study was to investigate the formation of the crystal structure of hexagonal boron nitride (h-BN) nanoparticles obtained by the chemical-thermal method using two-stage heat treatment. Boric acid and urea were used as starting precursors, enabling ammonia-free synthesis conditions. It is shown that the first thermal stage at 600 °C under a nitrogen atmosphere leads to the formation of a predominantly amorphous BN-containing precursor, whereas the second stage at 1000 °C in an N₂/H₂ atmosphere promotes crystallization of a highly ordered hexagonal h-BN phase. The morphology and particle size distribution were examined by transmission …

Multidentate Surfactant-Dependent Synthesis Of Giant Iridium Superstructures, Ramjee Balasubramanian, Maeren E. Hill

Chemistry & Biochemistry Faculty Publications

Giant superstructures of iridium, comprised of smaller spherical and slightly larger anisotropic nanoparticles, were synthesized by reducing iridium chloride in the presence of resorcinarene, a class of tetrameric macrocyclic polyphenols, with sodium borohydride in ethanol in 30 min under mild conditions. These superstructures were characterized by a range of techniques including TEM, HRTEM, EDS and other spectroscopic methods. The impact of the macrocyclic surfactant, its features and reaction conditions in dictating the formation of giant iridium superstructures was evaluated. The packing density of nanoparticles in these giant iridium superstructures could be altered qualitatively by varying the duration of the reaction, …

Development And Testing Of A Prototype Erbium-Doped Lithium Tantalate Based Sensor For Infrastructure Crack Detection And Measurement, Alejandro Barrera

Theses and Dissertations

Ensuring the safety and longevity of infrastructure is crucial to safeguarding communities and preserving economic stability. In this study, the development of a novel sensor for detecting and characterizing cracks in infrastructure, particularly suited for deployment on Unmanned Aerial Vehicles (UAVs), is presented. The device utilizes a laser (operating at 980 nm) for excitation of erbium-doped lithium tantalate nanoparticles that emit 1550 nm wavelength, which stimulates a photodiode for data collection. The data was utilized to collect, process, and reconstruct topological information. The synthesized lithium tantalate nanoparticle samples vary in erbium doping percentages of 0.5%, 3%, and 10%. Experimental evaluation …

Pd-Based Hydrogen Separation Membranes Synthesized Via A Liquid-Phase Route, Chase W. Thompson

Chemical and Biological Engineering ETDs

Palladium (Pd) membranes have gained significant attention for their ability to selectively separate hydrogen, a critical process for clean energy applications such as fuel cells and hydrogen storage. However, challenges such as grain growth, sintering, hydrogen embrittlement, and film uniformity limit their scalability and long-term stability. This thesis focuses on the controlled synthesis, deposition, and stability of Pd nanoparticles to optimize membrane performance for hydrogen separation. This work investigates solution-phase synthesis of Pd nanoparticles, focusing on temperature, precursor concentration, and solvent composition as key variables influencing particle growth and dispersion. Pd membranes were fabricated using nanoparticle deposition onto porous supports, …

The Evolution Of Nanoparticles In Nanoparticle Doped Optical Fibers, Mary Cahoon

All Dissertations

Optical fiber and fiber laser technologies based on silica glass are critical to many technologies today. One method to improve the optical performance of laser fibers is engineer the local environment around the active elements in the glass. To that end, this Dissertation focused on the fabrication and characterization of fibers made with nanoparticles incorporated into the glass to control the local composition. First, the nanoparticle composition and structure was analyzed as it evolved from from the initially-synthesized form to incorporation into the dense aluminum-silicate glass. The aluminum oxide in the glass was found to be important not only to …

The Bacteriostatic, Regenerative, And Immunomodulatory Properties Of Extracellular Matrix Particles For Lung Injury, Keera P. Rhoads

Theses and Dissertations

Acute respiratory distress syndrome (ARDS) is a prevalent, life-threatening lung condition, affecting nearly 200,000 Americans annually, with a 40% international mortality rate. There is no cure for ARDS, and current pharmacological treatments have limited effectiveness. Symptoms can be mitigated with mechanical ventilation, though this often leads to ventilator-induced lung injuries (VILI) and puts critically ill patients at risk of infections, including ventilator-associated pneumonia (VAP). A promising therapeutic is the extracellular matrix (ECM), a complex network of structural proteins and bioactive molecules that has been shown to have anti-inflammatory properties and prevent fibrosis. We aim to utilize the regenerative and immunomodulatory …

Laser-Induced Graphene For Early Disease Detection: A Review, Sri Ramulu Torati, Gymama Slaughter

Center for Bioelectronics Publications

Electrochemical biosensors have been instrumental in early disease detection, facilitating effective monitoring and treatment. The emergence of graphene has significantly advanced sensor technology in various fields, including biomedicine, electronics, and energy. In this landscape, laser‐induced graphene (LIG) has emerged as a superior alternative to conventional graphene synthesis methods. Its straightforward fabrication process and compatibility with wearable devices boost its practicality and potential for real‐world applications. This review highlights the transformative potential of LIG in biosensing, showcasing its contributions to the development of next‐generation diagnostic tools for early disease detection. An overview of the LIG synthesis process and its applications in …

La2nio4+Δ-Based Solid Oxide Electrolysis Cell (Soecs) Electrodes Enhanced With Complex Perovskite Nanocatalyst Processed By Surfactant-Enabled Infiltration, Cole Samuel Klemstine

Graduate Theses, Dissertations, and Problem Reports (ETD)

As the world seeks to reduce its reliance on hydrocarbons, the demand for sustainable hydrogen production methods has become increasingly critical. Hydrogen is a versatile energy carrier that can be produced from various sources, including water, natural gas, and biomass. Replacing the burning of hydrocarbons with hydrogen could significantly reduce greenhouse gas emissions, contributing to global climate goals like those set by the US H2NEW program. The joint technologies of solid oxide fuel and electrolysis cells present the ability to both produce and process clean hydrogen to meet these goals. Development into solid oxide fuel cells has been met with …

Influence Of Glycopolymer Structure On Amphiphilic, Hybrid, Linear Branched Block Copolymer Properties For Use In Biomedical Applications, Kevin Green

Dissertations

The focus of this dissertation is evaluating and adding fundamental knowledge regarding the structure-property relations of glycopolymers used in the design of hybrid block copolymers (HBC) that are cable of self-assembling into delivery vehicles for biomedical applications. A shift to the utilization of natural materials in the design and fabrication of drug-delivery vehicles has garnered significant attention. Understanding the effects of linear glycopolymers content and composition on the resulting HBCs properties can provide valuable insight into how these materials may be tailored for use in targeted biological applications.

The first chapter introduces current literature on the need for improvement in …

Innovative Approaches For Improving Orc Performance: A Review Of Pure Fluids, Zeotropic Mixtures, And Nanoparticles, Ebenezer Kumi, Vasudevarao Veeredhi, Christopher Enweremad

Journal of Mechanical Engineering Science and Technology (JMEST)

Although the organic Rankine Cycle (ORC) is said to effectively capture low-grade heat, its commercialization has been limited because of working fluid constraints and inefficiencies resulting from operating at low temperatures. This study reviews the working fluids used in organic Rankine cycles and examines how nanoparticles could enhance the efficiency of the ORC, by enhancing the thermophysical properties of the working fluids. Results from this review showed that zeotropic mixtures of pure fluids, provide a viable approach to improving the thermophysical characteristics of organic working fluids and have the potential to achieve thermo-economic performance superior to that of individual pure …

Crystalline Colloidal Arrays: Exploring Light-Matter Interactions, Haley W. Jones

All Dissertations

Understanding and manipulating quantum light-matter interactions, especially in the context of nanostructured environments, is highly critical for technological progress and inventive solutions in the fields of telecommunications, energy-efficient lighting, and cutting-edge quantum computing technologies. The fundamental interactions of photons with a surrounding environment directly impact the performance and efficiency of devices such as lasers, light-emitting diodes (LEDs), and quantum computing elements, which leverage the unique properties of confined structured environments. Since the late 1980s, the connection between a structured environment and the decay kinetics of an embedded fluorophore has been a highly debated and unresolved topic in the literature. More …

Near Infrared Upconversion Nanoparticles Modified With Semiconducting Polymers For Anti-Counterfeiting, Abraham Chibuikem Ikeji

Dissertations and Theses

Lanthanide doped up-conversion nanoparticles (UCNPs) are excellent luminescent materials due to their ability to perform photon up-conversion from low energy to high energy using their triplet energy metastable states and because of their long-lived excited state. These properties enable multiple applications with the near infrared upconversion emission. They have been incorporated in developing technologies to help curb counterfeiting activities and other areas of research. However, they still have some limitations such as the hydrophobic nature of the UCNPs, and the absence of functional groups that can also help impact other desired features. Thus, in this work we have coated up-conversion …

Electrospun Pt-Tio₂ Nanofibers Doped With Hpa For Catalytic Hydrodeoxygenation, Amos Taiswa, Randy L. Maglinao, Jessica M. Andriolo, Sandeep Kumar, Jack L. Skinner

Civil & Environmental Engineering Faculty Publications

Electrospinning is utilized to fabricate catalytic nanofiber scaffold for biocrude upgrading in hydrodeoxygenation (HDO) following computational studies suggesting the need for nano-catalysts for efficient HDO conversion and selectivity. Here, Pt-TiO₂ nanofibers are fabricated through electrospinning, followed by wet impregnation with a heteropoly acid (HPA), tungstosilicic acid. Intensive heat treatments were incorporated during and after processes to obtain a HPA doped Pt-TiO₂ nano-catalyst. Catalytic HDO was performed in a batch reactor with phenol as the raw biocrude dissolved in hexadecane. The HPA doped Pt-TiO₂ catalyst demonstrated promising HDO performance of 37.2% conversion and a 78.9% selectivity to oxygen …

Material Property Dependence Of Nanoparticle Silicon Carbide Alloying In Additively Manufactured Molybdenum, Andrew P. Mason

Theses and Dissertations

The structural performance of additively manufactured Mo printed by LPBF can be significantly improved by nanoparticle alloying. Previous AFIT studies of SiC nanoparticle addition conducted by Ellsworth (2022) et al. demonstrated increased powder consolidation, leading to reduced porosity, increased microhardness, and a shift in atomic defect concentrations. The addition of defected SiC particles is proposed to reduce in situ oxidation by acting as a sacrificial oxidizing agent and contributing to the formation of Mo disilicide secondary phases. This study investigated the relationship between laser powder bed fusion Mo microscale and nanoscale properties with varying SiC particle size while maintaining a …

Influence Of Dilute Silicon Carbide Nanoparticle Additions To The Microstructure And Mechanical Properties Of Laser Powder Bed Fusion Molybdenum, Nathan E. Ellsworth

Theses and Dissertations

Consolidation of pure molybdenum through laser powder bed fusion and other additive manufacturing techniques is complicated by a high melting temperature, thermal conductivity, and ductile-to-brittle transition temperatures. Nano-sized silicon carbide particles (0.1 wt%) were homogeneously mixed with molybdenum powder and the printing characteristics, chemical composition, microstructure, and mechanical properties were compared to pure molybdenum for scan speeds of 100, 200, 400, and 800 mm/s. The addition of silicon carbide improved the consolidation and mechanical properties and the oxygen content was reduced. Two mechanisms of oxygen reduction were identified as responsible for the improvements: oxidation of free carbon and the creation …

Non-Equilibrium Colloidal Phenomena In Magnetic Fields And Photoillumination: From Controlling Living Microbots To Understanding Microplastics, Ahmed Al Harraq

LSU Doctoral Dissertations

Colloids are a ubiquitous class of materials composed of microscopic particles suspended in a continuous phase which are found in everyday products and in nature. Colloids are also useful models for studying the spontaneous arrangement of matter from individual building blocks to mesophases. Standard treatment of colloid science is based on the assumption of equilibrium conditions, as defined in traditional thermodynamics. However, novel assembly mechanisms and motility are unlocked by pushing colloids away from equilibrium using external energy. In addition, many colloids in nature and in industrial applications exchange energy and mass with the surrounding environment thus behaving in a …

Size Distribution, Elemental Composition And Morphology Of Nanoparticles Separated From Respirable Coal Mine Dust, Shoeleh Assemi, Lei Pan, Xuming Wang, Titilayo Akinseye, Jan D. Miller

Michigan Tech Publications, Part 1

Nanoparticles, defined as particles with one dimension below 100 nm, contribute little to the total mass concentration in respirable coal mine dust (RCMD) toxicological studies, but they could have a considerable part in the adverse health effects by RCMD inhalation. It has been shown that inhaled nanoparticles can penetrate deep into the lung and could plausibly contribute to acute and chronic pulmonary diseases by triggering oxidative stress formation and inducing inflammation. RCMD nanoparticles from samples collected in an underground mine in the United States were analyzed by a particle separation technique, field-flow fractionation (FFF), for size, morphology, and elemental composition. …

Zinc–Acetate–Amine Complexes As Precursors To Zno And The Effect Of The Amine On Nanoparticle Morphology, Size, And Photocatalytic Activity, Josh Eixenberger, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

Zinc oxide is an environmentally friendly and readily synthesized semiconductor with many industrial applications. ZnO powders were prepared by alkali precipitation using different [Zn(acetate)₂(amine)_x] compounds to alter the particle size and aspect ratio. Slow precipitations from 95 °C solutions produced micron-scale particles with morphologies of hexagonal plates, rods, and needles, depending on the precursor used. Powders prepared at 65 °C with rapid precipitation yielded particles with minimal morphology differences, but particle size was dependent on the precursor used. The smallest particles were produced using precursors that yielded crystals with low aspect ratios during high-temperature synthesis. Particles …

The Generation And Transport Of Charged Aerosols: Fundamental Study And Applications In Medicine And Energy Conversion, Hao Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

Charged aerosols have significant implications in the field of functional material synthesis, pharmaceutical coating, and drug delivery. Electrospray systems are an effective methodology for generating highly charged monodispersed droplets in the size range from nanometer to micrometer. The prediction of surface charge, size and morphology of nanoparticles resulting from charged droplets are highly required for the precise control of nanoparticle properties and their effective utilization. However, the evolution of charged droplet is not well understood due to the existence of coulombic fission and ion evaporation processes. Thus, the goal of this dissertation is to elucidate how the precursor properties and …

Carbon Monoxide Oxidation On Model Planar Titania Supported Platinum Nanoparticles Catalyst, Jovine Emmanuel, Brian Hayden

Tanzania Journal of Science

A high-throughput (parallel) thermographic screening methodology was developed to enable the measurements of the particle size and support influence on heterogeneous catalysts. A high throughput screening chip has been used to establish the catalytic activity of titania supported platinum nanoparticles catalyst for CO oxidation reaction. The catalytic activity of Pt nanoparticles between 1.3 to 7.8 nm has been investigated for CO conversion at a pressure of 0.11 and 1.1 mbar with O2:CO ratio of 1:1 at 80 °C and 0.6, 1.1 and 2.4 mbar at O2:CO ratio of 1:1 at 240 °C. At these experimental conditions, there was an increase …

A Study On Effect Of Manufacturing Parameters On Morphology Of A356 Aluminum Foam, Nikhil Nanabhau Mahajan

All Theses

Metal foams have shown an excellent promise for usage as multifunctional material concerning research & development in the last 20 years. They provide remarkable mechanical as well as physical properties being lightweight. Open-cell metal foams have already been used in sound and noise absorption. Open-cell metal foams are outstanding for use in heat exchangers, filters, and many more applications, while closed-cell foams show excellent characteristics in impact energy absorptions. Closed-cell metal foams have higher energy absorption than their solid parent metal as they convert most of the impact energy into deformation energy. Metal foams have been used as prominent safeguard …

Spray Deposition Of Sustainable Plant Based Graphene In Thermosetting Carbon Fiber Laminates For Mechanical, Thermal, And Electrical Properties, Daniel W. Mulqueen, Siavash Sattar, Thienan Le, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Graphene has generated substantial interest as a filler due to its exceptional strength, flexibility, and conductivity but faces obstacles in supply and implementation. A renewable, plant-based graphene nanoparticle (pGNP) presents a more accessible filler with the same properties as mineral graphenes. In this study, we examine the effects of pGNP, which was sprayed on a carbon fiber/epoxy prepreg at loadings from 1.1 to 4.2 g/m². The study considered the mechanical, thermal, and electrical properties of pGNP-composite. An even particle dispersion was achieved using a spray application of pGNP in a water/alcohol suspension with the addition of surfactants and …

Development Of Oxide Dispersion Strengthening (Ods) Alloys Powder For Additive Manufacturing, Changyu Ma

Graduate Theses, Dissertations, and Problem Reports (ETD)

Additive manufacturing (AM) fabricated oxide dispersion strengthened (ODS) alloys are given high expectations for critical structural components such as the first stage turbine blade for their excellent creep strength and oxidation resistance compared to superalloys. However, the powder feedstock processing is still an open question since current state-of-the-art processes are not capable of achieving ultrafine strengthening elements such as Y₂O₃ in powder which leads to agglomeration issues in as-consolidated alloys. In this research, the oxidation behavior and stability of ultrafine oxide in AM-printed alloys using mechanically alloyed powders were evaluated at 1100 ^oC. In addition, a …

Incorporation Of Zinc In Pre-Alloyed Cuin[Zn]S2/Zns Quantum Dots, Jean Carlos Morales Orocu

Graduate Theses and Dissertations

Since the early 2000s heavy-metal-free quantum dots (QDs) such as CuInS2/ZnS have attempted to replace CdSe, their heavy-metal-containing counterparts. CuInS2/ZnS is synthesized in a two-step process that involves the fabrication of CuInS2 (CIS) nanocrystals (NCs) followed by the addition of zinc precursors. Instead of the usual core/shell architecture often exhibited by binary QDs, coating CIS QDs results in alloyed and/or partially alloyed cation-exchange (CATEX) QDs. The effect that zinc has on the properties of CIS NCs was studied by incorporating zinc during the first step of the synthesis. Different In:Cu:Zn ratios were employed in this study, maintaining a constant 4:1 …

Amorphous Silica Based Biomaterials For Musculoskeletal Tissue Regeneration Applications, Kamal Awad

Material Science and Engineering Dissertations - Archive

Musculoskeletal (MSK) injury includes any injuries that affect the bones, muscles, ligaments, tendons, or nerves. Open bone fracture is one of the common types of MSK traumatic injuries which results in not only bone fracture but also damage/loss of associated muscles, nerve, vasculature, endothelium, periosteum, fascia, and connective tissue. Surgical procedures and biological interventions are required to fix the broken bone, and muscle transfer is performed to compensate the skeletal muscle defects. Current treatments include fixative metal implants and regenerative biopolymer scaffolds, then muscle flap procedures to cover the bone. Yet, these treatments are inadequate because the used materials do …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Inventions Of Scientists, Engineers And Specialists From Different Countries In The Area Of Nanotechnologies. Part Ii, Leonid A. Ivanov, Li Da Xu, Zhanna V. Pisarenko, Qiang Wang, Petr S. Prokopiev

Information Technology & Decision Sciences Faculty Publications

The article provides an abstract review of patents. The results of creative activity of scientists, engineers and specialists, including inventions in the field of nanotechnology and nanomaterials, being implemented, allow achieving a significant effect in construction, housing and community services, and related sectors of the economy. For example, the invention «Method for liquidphase synthesis of nanostructured ceramic material in the CeO2–Sm2O3 system to create a solid oxide fuel cell» can contribute to the active development of alternative, hydrogen energy. Fuel cells have a wide range of applications – from batteries in portable electronic devices to large-scale power generation and autonomous …

Direct Solar Absorption Nanoparticle Doped Membranes For A Hybrid Membrane Distillation And Photovoltaic Cell, Alejandro Espejo Sanchez

Boise State University Theses and Dissertations

The growing demand for clean water supplies is driving the need for an innovative approach of water desalination. Developing a method for treating water with high salinities is possible with membrane distillation (MD). Additionally, MD is very attractive for pairing with solar energy due to the low temperature requirements. The integration of a membrane distillation system with a photovoltaic (PV) system will result in the co-production of electricity and clean water, thereby improving the economics of MD. Such a hybrid system will directly absorb thermal energy in the membrane for desalination while taking advantage of the spectrally selective nature of …