Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1 - 30 of 3185

Full-Text Articles in Materials Science and Engineering

A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading, Nahla Helmy Matar Jan 2027

A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading, Nahla Helmy Matar

Theses and Dissertations

The problem of mixed-mode fatigue crack growth has been a persistent research challenge. The determination of fatigue crack propagation direction directly impacts the safety and integrity of components and structures, making it crucial in various industrial applications, including welded drilling pipes, aerospace, and automotive engineering. Unlike uniaxial loading, mixed-mode cracks tend to change direction frequently (kinking), and nonproportional loading adds to the complexity of the problem. This research aims to estimate the crack propagation direction and fatigue crack life in linear elastic materials subjected to mixed-mode (I+II) loading conditions under proportional or non-proportional cyclic loading. Numerical software was developed based …

Go to article

A Systematic Review Of Alkali-Treated Polylactic Acid Biocomposites Relevant To Pineapple Leaf And Water Hyacinth Hybrid Design, Muhammad Rizky Adrianto Subandi, Tri Hartutuk Ningsih, Hanna Zakiyya Nov 2026

A Systematic Review Of Alkali-Treated Polylactic Acid Biocomposites Relevant To Pineapple Leaf And Water Hyacinth Hybrid Design, Muhammad Rizky Adrianto Subandi, Tri Hartutuk Ningsih, Hanna Zakiyya

Journal of Mechanical Engineering Science and Technology (JMEST)

The increasing demand for sustainable materials has accelerated the development of biodegradable polymer composites. Polylactic acid (PLA)-based natural fiber composites have attracted significant attention due to their renewable characteristics; however, their performance remains limited by weak fiber–matrix compatibility, moisture sensitivity, and inconsistent interfacial behavior. Alkali treatment has been widely applied to modify lignocellulosic fibers by removing non-cellulosic components and improving surface characteristics, although its effectiveness remains dependent on treatment conditions and fiber properties. This systematic review evaluates the influence of alkali treatment on PLA-based natural fiber composites and assesses the available evidence supporting future pineapple leaf fiber (PALF) and water …

Go to article

Experimental Study On The Behavior Of High-Strength Reinforced Concrete Beams With A Longitudinal Void, With And Without Micro Steel Fibers, At Different Shear Spans, Farah M. Hussein, Saif Altai, Shatha Alasadi, Ayoob A. Ibrahim, Arshad Nadhom Shubber Sep 2026

Experimental Study On The Behavior Of High-Strength Reinforced Concrete Beams With A Longitudinal Void, With And Without Micro Steel Fibers, At Different Shear Spans, Farah M. Hussein, Saif Altai, Shatha Alasadi, Ayoob A. Ibrahim, Arshad Nadhom Shubber

Journal of Sustainable Construction Materials and Technologies

This study examines the impact of creating a longitudinal void in high-strength reinforced concrete (RC) beams to decrease concrete volume. Testing involved three groups: solid beams (SB), beams with a 75 mm void (VB), and beams with a void incorporating 1.2% micro-steel fibers (VBSF), across various shear spans (a/d) of 1.8, 2.7, and 3.6. Results indicated that increased a/d led to a 54.2% reduction in peak loads and a 119.2% increase in deflection for solid beams. The void negatively affected load-bearing at a/d = 1.8 with a 25% peak load reduction and brittle failure. At a/d = 2.7, effects were …

Go to article

The Effect Of Transition Metal Oxides On The Performance Of Triboelectric Nanogenerators, Md Arafat Hossain, Abdullah Mohammad Sarjish, Md. Wasikur Rahman, Victoria Padilla, Mohammed Jasim Uddin Sep 2026

The Effect Of Transition Metal Oxides On The Performance Of Triboelectric Nanogenerators, Md Arafat Hossain, Abdullah Mohammad Sarjish, Md. Wasikur Rahman, Victoria Padilla, Mohammed Jasim Uddin

Mechanical Engineering Faculty Publications

Triboelectric nanogenerators (TENGs) are a promising energy-harvesting technique that utilizes contact electrification and electrostatic induction to convert mechanical energy into electrical energy. Contact electrification can occur between any two surfaces that experience periodic physical contact and separation, regardless of the material type. Various materials have been investigated for triboelectrification in TENGs for different applications. Although polymers are used in TENGs, various transition metal oxides (TMOs), including binary, ternary, and doped binary/ternary oxides, have also been widely studied as filler materials to improve TENG performance. Introducing TMOs into the polymer matrix enhances the performance by increasing surface charge density and enabling …

Go to article

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono Sep 2026

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono

Journal of Mechanical Engineering Science and Technology (JMEST)

Water-powered funicular railways are an environmentally friendly mode of transport whose efficiency heavily depends on the principle of gravity. However, their operation is vulnerable to natural wind disturbances that can hinder speed or cause a risk of overturning on steep, curved tracks. This study aims to analyse the influence of funicular car model design on the rolling moment exerted on the rails as the car turns to enter a track branch. The research methodology involves aerodynamic simulations using SolidWorks flow simulation, comparing three body models: WAHYUDI, FUNAERO, and AEROFUN. Simulations were conducted with variations in turn angles (10° to 30°) …

Go to article

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid Sep 2026

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid

Journal of Sustainable Construction Materials and Technologies

The use of precast concrete structures with grouted sleeve (GS) connections has gained significant traction in the acceleration of bridge construction. The plastic hinge length (Lp) is a critical parameter for assessing the seismic performance and deformation capacity of such structural members. The previous study has proposed empirical equations for Lp in monolithic columns; however, a comprehensive understanding of the influential parameters on Lp in precast concrete columns with GS connections remains limited. This study presents a detailed parametric investigation to evaluate the effects of key design parameters on the plastic hinge length of a precast concrete columns with GS …

Go to article

Sla Elastic Resin Curing Test Data, Richard Amesimenu, Johnson Nwogu, Haijun Gong Sep 2026

Sla Elastic Resin Curing Test Data, Richard Amesimenu, Johnson Nwogu, Haijun Gong

Datasets

3D printing via stereolithography (SLA) enables high-resolution polymer components, but as-printed parts may exhibit incomplete polymerization and reduced mechanical performance. This study investigates the effects of UV post-curing time on SLA-printed elastic photopolymer resin. Specimens were evaluated using Differential Scanning Calorimetry (DSC), uniaxial tensile testing (ASTM D412 Type C), and Durometer Type M hardness testing. Results show that increased post-curing enhances crosslink density, tensile strength, elastic modulus, and hardness, while extended curing may reduce ductility. An optimal post-curing window balancing stiffness and flexibility was identified. Testing datasets include DSC (dsc/), tensile testing (tensile/), and hardness testing (hardness/) results for uncured …

Go to article

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto Sep 2026

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Renewable energy from lignocellulosic biomass is a promising alternative to fossil fuels. Coconut shell (CS) waste is a favorable precursor for porous carbon due to its high carbon content, abundance, and non-food nature. However, conventional biochar often has limited surface area and catalytic active sites, hindering its effectiveness as a catalyst. While Fe-based modifications are promising, the use of ferric nitrate-assisted activation of coconut-shell-derived porous carbon remains underexplored. This research focused on developing an Fe-doped porous carbon catalyst from CS via ultrasound-assisted impregnation, followed by activation in a tube furnace. CS biochar was produced through pyrolysis at 550 °C and …

Go to article

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa Aug 2026

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Go to article

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto Aug 2026

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Go to article

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika Aug 2026

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

Go to article

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa Aug 2026

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Go to article

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih Aug 2026

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Go to article

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo Aug 2026

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Go to article

Additive Manufacturing Of Metals: Mechanical Properties And Their Implications, Sean Chih Aug 2026

Additive Manufacturing Of Metals: Mechanical Properties And Their Implications, Sean Chih

Discovery Day - Daytona Beach

Additive manufacturing of metals is a relatively new and groundbreaking approach to manufacturing high-performance components. However, variability in mechanical properties from the process creates a barrier before this manufacturing technique can be widely applied. Understanding when and where to use this manufacturing is also important to create components with efficiency and without harmful defects. The objective of this research is to evaluate the effects of build orientation, printing parameters, internal defects, thermal history, and residual stresses, post-processing heat treatments, and fatigue behavior on additively manufactured components. Literature-based research is conducted on commonly used metals for additive manufacturing, such as stainless …

Go to article

Cavitation In Pumps And Propellers: Causes, Effects, Prevention, And Future Trends, Gillian Negron Burgos, Olivia Wilson Aug 2026

Cavitation In Pumps And Propellers: Causes, Effects, Prevention, And Future Trends, Gillian Negron Burgos, Olivia Wilson

Discovery Day - Daytona Beach

In this research, we will explore cavitation in pumps and propellers, including its causes, effects on system performance, prevention methods, and future engineering solutions. Cavitation occurs when the local pressure of a flowing liquid drops below its vapor pressure, forming vapor-filled bubbles that collapse and damage mechanical components. Disciplines such as fluid mechanics, thermodynamics, and materials science contribute to understanding and mitigating cavitation in fluid machinery.   When vapor bubbles collapse near metal surfaces, they generate localized shock waves that cause pitting, erosion, vibration, and noise. These effects reduce efficiency, increase maintenance requirements, and shorten the lifespan of rotating machinery used …

Go to article

Microstructural Shielding And Advanced Fatigue Crack Analysis In The Presence Of Deformation Twinning, Seyed Ali Asli Aug 2026

Microstructural Shielding And Advanced Fatigue Crack Analysis In The Presence Of Deformation Twinning, Seyed Ali Asli

All Dissertations

Design methods to mitigate fatigue failures have remained relatively stagnant, as engineers have relied on existing continuum-level models and adhered to the damage tolerance design methodology. Although damage-tolerant design has led to increased safety, extended component in-service life, and better life predictions, it still relies on maintenance routines to identify dangerous cracks. This research aims to test the hypothesis that bundles of deformation twin boundaries will increase the resistance to fatigue crack growth (FCG). Slip and twinning are two dominant mechanisms of plastic deformation in metals. Slip is more common in materials with face-centered cubic (FCC) crystal structures at room …

Go to article

Review: Mechanics Of Mycelium Materials, Md Anwar Sadat Anik, Ehsanul Azim, Gerardo I. Zapata, Mohammad R. Islam Aug 2026

Review: Mechanics Of Mycelium Materials, Md Anwar Sadat Anik, Ehsanul Azim, Gerardo I. Zapata, Mohammad R. Islam

Mechanical Engineering Faculty Publications

The biological growth of fungal root structure, called mycelium, can be engineered to develop innovative fibrous and biocomposite materials. Mycelium materials have potential as sustainable alternatives to petroleum-derived materials for load-bearing applications. To realize this potential, there is an increasing effort dedicated to understanding the mechanics of mycelium materials. This work presents a systematic review of our current understanding of the mechanics of mycelium materials with a specific focus on structure–property relationships. The review first explores how the mycelium’s fiber network structure varies depending on whether it is grown as a two-dimensional (2D) membrane, a cellular foam, or as a …

Go to article

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser Jul 2026

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser

Journal of Mechanical Engineering Science and Technology (JMEST)

Sugarcane is one of the important commodities in the industry where bagasse fiber as waste is abundantly available.   Sugarcane bagasse fiber has high cellulose, a key element in the utilization of bagasse. Chemical pretreatment is important to prepare the natural fiber before used as composite reinforcement. The purpose of the study is to analyze the thermal degradation of bagasse fiber after being treated using NaOH and TEMPO solution. The manufacturing method was carried out by a series of washing bagasse with distilled water and NaOH solution, subsequently soaking it in 6% NaOH and 2,2,6,6-tetramethylpiperidine-l-oxyl (TEMPO) solution, and conducted oven-dried. Thermogravimetric …

Go to article

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli Jul 2026

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of ethanol-blended fuel in a standard vehicle can reduce combustion quality, which has an impact on decreasing vehicle performance. At the above 20% blend level, it affects vehicle performance and requires adjustments to engine settings or the Electronic Control Unit (ECU) before use on conventional engines. This study investigates the effect of aftermarket ECU settings on the performance of a 150 cc motorcycle operating on a gasoline-ethanol blend. Four fuel variations were tested: Pertalite (P100), revvo 90 (R100), and 30% ethanol blends (PE30 and RE30). This study analyzes the effects of optimizing injection duration and ignition timing settings …

Go to article

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah Jul 2026

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO2-Al2O3 hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO2-Al2O3 mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Go to article

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika Jul 2026

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika

Journal of Mechanical Engineering Science and Technology (JMEST)

The processes of moulding and reinforcing chemical elements have a big impact on the balance of chemical composition in copper-based bearing alloys. This has a direct impact on how well the material works. This study examines Cu–Sn alloys produced via sand casting and Cu–Zn alloys fabricated through permanent mould casting, with the incorporation of nickel, which remains uncommon. The objective was to examine the variations in the equilibrium of the chemical composition and the performance potential of the bearing alloy metal when subjected to different casting techniques and nickel concentrations ranging from 0% to 4%. Some of the methods used …

Go to article

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly Jul 2026

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Go to article

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa Jul 2026

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Go to article

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch Jul 2026

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Go to article

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek Jul 2026

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Go to article

Structural Design And Finite Element Analysis Of A 54 Ton Freight Wagon Bolster Test Rig Under Vertical Center Plate Load, Shandy Dwi Prayoga, I Dewa Gede Ary Subagia, I Ketut Adi Atmika, Abdul Rohman Farid, Yunior Lanang Satrio Jul 2026

Structural Design And Finite Element Analysis Of A 54 Ton Freight Wagon Bolster Test Rig Under Vertical Center Plate Load, Shandy Dwi Prayoga, I Dewa Gede Ary Subagia, I Ketut Adi Atmika, Abdul Rohman Farid, Yunior Lanang Satrio

Journal of Mechanical Engineering Science and Technology (JMEST)

Bolster is one of the bogie's components that receives direct loading from the car body and freight movement. One of the problems that occurs in the bolster is permanent deflection during vertical and transversal static loading. Therefore, a static loading test is required to evaluate the structural strength of the bolster. During the static loading test, a rig is required to hold the bolster so that the bolster is in a fixed position. The rig owned by PT. INKA (Persero) showed a plastic deformation at the vertical center plate load (VCP 5.22P). Therefore, a modified design of the rig is …

Go to article

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono - Jul 2026

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono -

Journal of Mechanical Engineering Science and Technology (JMEST)

The objective of this study is to model variations in pump geometry to obtain optimal performance under the effects of cavitation. The resulting geometric variation models were then simulated using ANSYS Fluent software. The first geometric variation model used a standard 5-blade impeller with suction pipe diameter variations of 2, 2 ½, 2 ¾, 3, 3 ¼, 3 ½, and 4 inches. The second geometric variation model for simulation used a standard 3-inch suction pipe with impeller blade variations of 3, 4, 5, 6, 7, 8, and 9. The simulation results indicated that the number of blades without changes in …

Go to article

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj Jul 2026

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fiber reinforced composites are increasingly being developed due to their environmentally friendly nature, low production costs, and safety for human health. However, the presence of lignin and hemicellulose reduces adhesion properties between fiber and composite matrix. Alkalization treatment is an effective way to remove lignin and hemicellulose attached to cellulose. This study aims to determine the optimum concentration of NaOH used during alkalization process of pineapple stem fiber. The methods included the retting process of fibers from pineapple stems. The obtained fibers were soaked in variations of 2%, 4%, 6%, and 8% NaOH for 4 hours,  then dried and …

Go to article

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju Jul 2026

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Go to article

Next Last