Materials Science and Engineering Commons^™

Investigating The Corrosion Behavior Of Stainless Steel 316 In Static Lead Lithium Eutectic Under Applied Stressed Conditions, Daniel E. Levario

Nuclear Engineering ETDs

As fusion power moves closer to feasibility, identifying structural materials compatible with breeding blanket environments remains a critical challenge. Lead-lithium eutectic (LLE) is a leading candidate breeder and coolant material due to its low melting point and combined tritium breeding and neutron multiplication capability. However, the corrosive nature of LLE toward structural steels at elevated temperatures must be characterized before these systems can be reliably deployed. This study investigates the corrosion behavior of Type 316 stainless steel in static LLE under applied stress conditions at 550°C using C-ring stress corrosion specimens. Post exposure analysis via optical microscopy, SEM, EDS, and …

Improvement Of Mechanical And Corrosion Properties Of Weld In Stainless Steel In Crude Oil Tank By Using Nano-Fillers, Ali Abdulzahra Shanshoon

Al-Esraa University College Journal for Engineering Sciences

The aim of this study is to investigate the corrosion behavior and mechanical properties of welded steel exposed to gases emitted from crude oil reservoirs. In this study, two types of nanoparticles were used as fillers during welding to improve corrosion and mechanical properties. TiO₂ and SiO₂ nanoparticles were mixed with soldering oil in four mass concentrations of 0, 1, 2.5 and 5% by ultrasonic bath method and used as filler during the welding process. In order to prepare the samples, plain carbon steel with a thickness of 3 mm was used and they were welded together by …

Effect Of Heat Treatments On The Corrosion Resistance Of A Trip Steel And Its Evaluation By Non-Destructive Testing, Karla Ivette Vega-Nava, Ariosto Medina-Flores, Marco Antonio Espinosa-Medina, José Sergio Pacheco-Cedeño, Héctor Guillermo Carreón-Garcidueñas, Francisco Fernando Curiel-López, Jose Jaime Taha-Tijerina

Mechanical Engineering Faculty Publications

The development of advanced high-strength steels (AHSS) for the automotive industry requires optimizing the balance between mechanical properties and durability in aggressive environments. This study investigates the effects of two heat treatment routes on the microstructure and corrosion resistance of a transformation-induced plasticity (TRIP) steel (Fe-0.2C-1.75Mn-0.5Si-1Al). Route A includes a full austenitizing step at 1000 °C prior to intercritical annealing, whereas Route B omits this step and begins directly with intercritical annealing at 800 °C. Microstructural characterization (SEM/XRD), electrochemical assays, and eddy current tests were employed. The results revealed that Route A yields a homogeneous microstructure with 12.7% retained austenite, …

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah

Makara Journal of Science

The effect of Nb addition on the corrosion behavior of U–6Zr alloys within an aerated, demineralized water (DW) environment (pH 5.61) and its correlation of this addition with the mechanical and microstructural properties of the alloys were investigated. The U–6Zr–xNb alloys (x = 1, 4, and 7 wt.%) were synthesized by arc-melting U, Zr, and Nb. Additionally, the samples were mounted and polished, after which they were subjected to electrochemical corrosion analysis using a potentiostat. This evaluation was conducted in a DW medium (pH 5.6), representing an aerated atmosphere, at room temperature (27°C) and a potentiodynamic scan rate of 1 …

Investigation Of Electrochemical Corrosion Fatigue Mitigation Strategies For Mild Carbon Steel, Joel Andrew Hudson

Doctoral Dissertations

Corrosion fatigue remains a critical durability challenge for steels used in boiler tubes and other safety-critical components, where the interaction of cyclic stresses and corrosive environments accelerates material degradation. This dissertation comprises three experimental studies aimed at advancing mitigation strategies and test methodologies: (1) enhancing corrosion resistance through electrodeposited Fe-Ni anodic coatings, (2) inducing synthetic crack closure to suppress fatigue crack growth, and (3) developing an accessible, low-cost, automated testing system to investigate environmentally assisted cracking (EAC) under controlled laboratory conditions. The first study examined the corrosion behavior of Fe and Fe-Ni electrodeposits synthesized from sulfate-based baths and applied to …

A Magnesium Alloy With High Corrosion Resistance, Hardness And Elastic Modulus Enabled By Elemental Synergy, Alexander Helmer, Manoj V. Mugale, Tushar Borkar, Rajeev K. Gupta

Mechanical Engineering Faculty Publications

A magnesium alloy containing Ca, Ti, Zn, and In was synthesized via high-energy ball milling of elemental powders followed by spark plasma sintering. X-ray diffraction and scanning electron microscopy revealed a homogeneous matrix with dispersed Mg-rich phases and intermetallics. Potentiodynamic polarization tests revealed low corrosion current density (9.6 f 2.1 mu A/cm2), a noble corrosion potential (-1197 f 4 mVSCE), and a clear passive region, indicating excellent corrosion resistance. Nanoindentation tests showed high hardness (2.61 f 0.21 GPa) and elastic modulus (55.35 f 5.47 GPa), exceeding those of commercial Mg alloys.

Improving Fatigue Strength And Life Of Single Crystal Cmsx-4, Jochen Peter Fuhr, Lloyd Hackel, Nicolau I. Morar, Noah Holtham, Keivan Davami, Montu Sharma, Rajkumar Roy

15th International Conference on Shot Peening

The deep penetration of laser peening (LP) and retention of residual stress at high temperature by LP is significant in improving fatigue life and strength of superalloys exposed to high temperature and corrosion. Single crystal CMSX-4, was evaluated for stress relaxation and both fatigue life and fatigue strength of material that was LP-treated compared to non-LP and shot-peened (SP) specimens. LP was done with multiple layers using a 20 J/pulse laser where the laser high energy enabled using a 5 mm spot size on the metal surface. Stress measurements by the slitting technique showed the plastic penetration depth exceeded SP …

Potential Of Lidar And Hyperspectral Sensing For Overcoming Challenges In Current Maritime Ballast Tank Corrosion Inspection, Sergio Pallas Enguita, Jiajun Jiang, Chung-Hao Chen, Samuel Kovacic, Richard Lebel

Electrical & Computer Engineering Faculty Publications

Corrosion in maritime ballast tanks is a major driver of maintenance costs and operational risks for maritime assets. Inspections are hampered by complex geometries, hazardous conditions, and the limitations of conventional methods, particularly visual assessment, which struggles with subjectivity, accessibility, and early detection, especially under coatings. This paper critically examines these challenges and explores the potential of Light Detection and Ranging (LiDAR) and Hyperspectral Imaging (HSI) to form the basis of improved inspection approaches. We discuss LiDAR’s utility for accurate 3D mapping and providing a spatial framework and HSI’s potential for objective material identification and surface characterization based on spectral …

Laser Ablation-Induced Corrosion Resistance For Molten Salt Equipment Materials Evaluated Utilizing Electrochemical And Spectroscopic Analysis, Peggy Milota

Theses and Dissertations

Advanced reactors and used nuclear fuel separation (i.e. pyroprocessing technology) utilize high temperature salt as a thermal storage medium as well as an ionic solution for electrochemical processes. The use of these aggressive molten chloride and fluoride mediums requires specific materials or additional system alterations to extend the lifetime and structural integrity of equipment due to corrosion. Some materials, in the presence of inherently impure salt, will corrode and form oxide films in a specific formation that decreases corrosion rate by electrochemically and physically preventing elemental movement to the material surface. This is referred to as a passivation layer. However, …

Corrosion Of Pipes In Soil Under Cathodic Protection, Ashley Chow

Williams Honors College, Honors Research Projects

This research project focuses on understanding how various soil properties affect the corrosion of buried pipelines that are protected by cathodic protection (CP) systems. Specifically, the study seeks to evaluate key soil characteristics, including resistivity, moisture content, and pH levels to determine their influence on the efficiency of CP systems in mitigating corrosion. Through controlled laboratory experiments, carbon steel specimens were exposed to a range of simulated soil conditions to mimic real-world environments. Corrosion rates were assessed using advanced electrochemical techniques, such as linear polarization resistance (LPR) and Tafel slopes, along with traditional mass loss methods. The primary objectives of …

Effects Of Soil Properties On Cp Performance, Cecilia Segretario

Williams Honors College, Honors Research Projects

This research aims to evaluate the affect of various soil properties on the effectiveness of cathodic protection (CP) in preventing underground pipeline corrosion. Metal coupons of common pipeline materials with applied CP will be mounted in several separate controlled soil environments to manipulate real world underground corrosion scenarios. Each soil environment will have different physical properties by mixing the soil with a prepared chemical solution. The physical properties to be evaluated include pH, resistivity, and moisture content. At the end of a corrosion duration, weight loss method will be used to evaluate the corrosion rate over that period. Additionally, the …

Development, Characterization And Testing Of Traditonal And Advanced Nuclear Fuel Cladding Materials, Joshua Eddy Rittenhouse

Doctoral Dissertations

Kanthal D and FeCrAl alloys in general, are prospective candidates as accident tolerant nuclear fuel cladding materials. The work presented herein focuses on applying two techniques of severe plastic deformation, equal channel angular pressing (ECAP) and high-pressure torsion (HPT), as means of grain refinement to improve irradiation resistance. Samples of as-received, ECAP, and HPT processed Kanthal D were exposed to neutron irradiation to a dose of 2 DPA at two different temperatures, 300 °C and 500 °C. Detailed characterization was performed including mechanical and microstructural, and several positive improvements with regards to irradiation resistance were identified in the ECAP and …

Comparative Analysis Of Risk-Based And Time-Based Inspection Application In Hydrocarbon And Chemical Industries: A Review, Azizar Azizar, Nofrijon Sofyan

Journal of Materials Exploration and Findings

RBI and TBI strategies are comparatively reviewed in terms of their contribution to maintaining asset integrity for asset owners in the hydrocarbon and chemical industries. The objective is to assess various methods on a cost-efficient and risk-managed operational safety basis. It utilizes common industry standards such as API 580 for RBI, and API 510, API 570, and API 653 for TBI, and also case studies and literature analysis. The analysis of data was conducted to examine how each approach deals with inspection planning and decision-making. They suggest that RBI's risk-based prioritization strategy leads to more effective management of high-risk assets, …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Tin-Silver As A Novel Biodegradable Metallic Biomaterial, Charley Goodwin

All Dissertations

The Essure device is a non-hormonal, minimally-invasive, permanent female sterilization implant, removed from the market due to an increase in adverse events, hypothesized to be caused by corrosion of the Sn-Ag component of the implant. The goals of this dissertation were to first develop implant retrieval methods for Essure devices and surrounding tissue, documenting signs of degradation and metallic degradation products, then to characterize the electrochemical behavior of Sn-Ag in biologically representative environments and finally, to assess the biological interaction of Sn-Ag. Retrieval analyses developed successful methods, qualifying the degree of corrosion, primarily of the Sn-Ag component and finding Sn …

Change Of Metal Oxidation State At High Temperature, Impact Of Temperature And Reactive Gases, Yegor Nikitin

Dissertations and Theses

The fundamental understanding of gas-solid reactions enables a wide range of applications to be developed and improved. Specifically, the use of metal-based materials is critical to ensuring robust, safe, and long-term operations. For example, in power systems where boilers are used to generate steam for heat or electricity generation the use of stainless metal alloys is critical to allow high quality steam to be produced in a very harsh environment. Alternatively, in catalysis, the use of metal doped heterogeneous catalysts are essential in achieving selectivity and conversion performance for chemical synthesis to emissions abatement. Typically, these metal alloys must withstand …

Effects Of Ac Interference On Pipelines Under Cathodic Protection And Cathodic Disbondment Of Pipeline Coatings, Tanner Laughorn

Williams Honors College, Honors Research Projects

This project is split into two parts. The first revolves around AC interference on pipeline steel under cathodic protection. The corrosion rate of steel samples will be measured after they are exposed to varying levels of AC interference and cathodic protection. The results will be used to help develop new guidelines for appropriate cathodic protection of steel pipelines. The second part of this project revolves around the cathodic disbondment of pipeline coatings while under cathodic protection. The disbondment distance, electrolyte pH, and electrochemical impedance spectroscopy will be tested for multiple industry standard coatings under various conditions. The results will be …

Corrosion Inhibitors: Mitigating The Degradation Of Rebar, Jake R. Hughes

Williams Honors College, Honors Research Projects

Our conjecture was twofold: first, that two compounds historically used as food preservatives could act as environmentally friendly inhibitors against rebar corrosion, and second, that molecular properties have a quantifiable influence on inhibition efficiency (%IE). To evaluate the two compounds, cyclic potentiodynamic polarization was used to determine corrosion current density (i_corr) and %IE. The “green” inhibitor candidates included sodium metabisulfite and ascorbic acid, which yielded maximum %IE values of -123900% and 91%, respectively. Results indicated that sodium metabisulfite is not a suitable inhibitor, while ascorbic acid showed potential to extend reinforced concrete’s design life without posing health or …

Passive Wireless Corrosion And Temperature Detection In High-Temperature Environments, Noah Lane Strader

Graduate Theses, Dissertations, and Problem Reports (ETD)

This work focuses on the theory and development of LC sensors for high temperature and corrosion measurement for stainless steel and copper surfaces with power industry and general corrosion detection applications. The LC resonators were fabricated via screen printing an Ag inductor on an alumina substrate. The LC design was modeled using the ANSYS HFSS modeling package. The LC passive wireless sensors operate with resonant frequencies centered at 85-110 MHz. The wireless response of the LC sensor was interrogated and received by a radio frequency signal generator and spectrum analyzer at temperatures from 50-800 °C for copper ground planes and …

Investigating The Influence Of Surface Finishing Methods On Corrosion Of Additively Manufactured Ss316l, Joshua R. Fadeley

Boise State University Theses and Dissertations

Additive Manufacturing (AM), namely with metal, has seen a surge in growth and interest over recent years. A wide array of industries is developing new products to take advantage of this budding technology. In order to enable adoption of this technology, understanding of the differences of AM versus traditional manufacturing on the resultant materials properties of printed components is important. The work done for this study fell into two separate categories of work.

The first effort of this work involved the installation, certification, and operation of the first laser powder bed fusion (LPBF) printer at the Center for Advanced Energy …

Corrosion Related To The Nuclear Waste Containers, Ali Ebrahimzadeh Pilehrood

Corrosion Research

The disposal of nuclear waste is a demanding topic, and the existing methods, whether it is temporary storage in spent fuel pools or storage in geological repositories, both face the risk of corrosion-related problems. Any failure in these storage methods can potentially lead to the release of radioactive materials into the environment. To avert such catastrophic scenarios, people in the nuclear industry consistently monitor and maintain these storage facilities endlessly and attempt to improve the plans designed to store nuclear waste. Here, I will examine the nuclear waste management organization (NWMO) plan in Canada. Choosing an appropriate location for the …

Corrosion Case Study On Pipeline, Kangze Ren

Corrosion Research

The Kashagan pipeline leaks were likely caused by sulfur stress corrosion cracking, a combined corrosion mechanism developed by the presence of high pressure, the high level of hydrogen sulfide(the main "ingredient" of sour gas), and poor metallurgical choice. Improper welding and poor metallurgical examination were blamed for causing the leaking issue. The purpose of the current review is to raise the alarm about the inappropriate corrosion management of Kashagan oil production and its societal and environmental consequences.

Estimating Remaining Life And Fitness-For-Services Evaluation Of Fuel Piping Systems, Sekar Putri Purwidyasari, Ahmad Isni Kurniawan, Deni Ferdian

Journal of Materials Exploration and Findings

Assets life extension are required to predict the design life expiry based on condition and effects of deterioration. The remaining life assessment will answer the questions about timing of the component or equipment will lead to failure and shall be evaluated by inspection and maintenance monitoring. This study elaborates process calculation and analysis by using remaining life assessment and fitness for services method according to API 579-1/ASME FFS-1 for process piping area. The result of remaining useful life estimation and estimated life has been proposed. There are 11 piping systems based on the condition monitoring with thickness measurements. The result …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Corrosion Case Study On Automobile, Grace Ajayi, Xinran Pan, Geethu Sasikala, Marshall S. Yang

Chemistry Publications

No abstract provided.

Development Of Battery Materials To Function As Corrosion Protection On Car Body Plates, Tubagus Noor Rohmannudin, Sulistijono Sulistijono, Noval Adrinanda, Faridz Wira Dharma, Samuel Areliano

Journal of Materials Exploration and Findings

Most car bodies made for mass production are made from steel or aluminum. Both are strong metals, but steel is cheaper than aluminum and is more commonly used in lower-end cars for a broader consumer range. The weakness of steel compared to aluminum is that it is susceptible to corrosion under certain conditions, and thus it may deteriorate over time without proper care. To prevent corrosion, modern cars are coated with paint to prevent direct contact with the environment. As a second line of protection, a car battery can be connected to the body to create an impressed current cathodic …

Investigation Of Oxidation And Corrosion Resistance Of Ni-Based Alloys And Stainless Steels Under Co2 Environments At Elevated Temperatures, Spencer Roy Fultineer

Graduate Theses, Dissertations, and Problem Reports (ETD)

High mechanical strength integrity, high robustness towards oxidation, and high resistance to carburization under CO2 environments at elevated temperatures are usually required for metallic systems that are employed for power generation. INCONEL 625 is a nickel-based superalloy that started development in the 1950s. This material was designed with the distinct purpose of use in high-temperature and high-pressure systems. While various materials possess the physical properties to handle these conditions, the creation of IN625 addresses the need for a material to withstand the highly corrosive properties of these kinds of environments. In order to evaluate the oxidation and corrosion resistance of …

Intergranular And Pitting Corrosion Mechanisms Of Sensitized Aluminum Alloy Aa5083, Clayton Egleston

Williams Honors College, Honors Research Projects

The motivation and objectives of this project is to examine the mechanisms of intergranular corrosion (IGC) and pitting corrosion of sensitized AA5083. In this regard, different characterization techniques were used, including optical analysis of microstructure, cyclic potentiodynamic polarization with Tafel fitting, electrochemical impedance spectroscopy with electrical equivalent circuit (EEC) fitting, and potentiostatic current transient monitoring. The transition from IGC to pitting corrosion occurs when the grain boundaries become saturated with the β-phase (Mg₂Al₃). It was found that AA5083 becomes more vulnerable to pitting corrosion as the degree of sensitization increases.

Understanding Charge Effects On Marked Ball Wear Rates – A Corrosion Study, John Bailey Fletcher

Masters Theses

"To measure the wear rates of grinding balls within a ball mill, marked ball wear tests (MBWTs) have been used extensively. Using the wear rates from a MBWT, operators select the most cost-effective media for their grinding application. One factor that a MBWT does not account for is the possible interaction between different media materials which could affect their corrosion rates. Galvanic coupling between dissimilar metals can cause significant changes in their corrosion rates. While galvanic interactions between minerals and grinding media have been studied, the interaction between dissimilar media has not. Corrosion rates and potentials of modern high carbon …

An Investigation On The Interface Corrosion Behaviors Of Cobalt Interconnects In Chemical Mechanical Polishing Slurry, Kai-Xuan Qin, Peng-Fei Chang, Yu-Lin Huang, Ming Li, Tao Hang

Journal of Electrochemistry

Cobalt is widely regarded as the most promising interconnect material for 10 nm node and beyond. The development of a chemical mechanical planarization (CMP) slurry suitable for cobalt interconnect is a critical component for the application of cobalt interconnect. During CMP process of the interconnect layer, the achievement of high-quality surface after planarization is greatly challenged by the metal corrosion in CMP slurry. In this contribution, the corrosion behavior of cobalt in a slurry with potassium persulfate (KPS) as an oxidizer, glycine as a complexing agent, and benzotriazole (BTA) as an inhibitor was investigated. Static erosion rates (SER) of cobalt …