Materials Science and Engineering Commons^™

Structural Studies Of Natural Zeolites And Optimizations For Water Hardness Softening Media, Tesfamariam Teklu Gebretsadik, Teklit Kidane Gebremedhin

Journal of Metals, Materials and Minerals

This study was aimed at investigating the mineralogical composition and structural features of natural zeolites using XRF, XRD, TGA, FT-IR and SEM. Natural zeolites were subjected to acid-activation and subsequently with NaCl salt to enhance surface area for water hardness softening applications. Peaks around 3560 and 1650 cm-1 belongs to O - H stretching and O - H bending vibrations which confirmed the presence of moisture within zeolite structures. This result was further supported by evolution of moisture above 108°C from thermogravimetric analysis. Fibrous structures which are full of rough texture were examined by SEM. The XRD pattern confirmed Stellerite …

Investigation Of Crosslink Structure Of Natural Rubber During Vulcanization Using X-Ray Absorption Near Edge Spectroscopy, Kanoktip Boonkerd, Wanwisa Limphirat

Journal of Metals, Materials and Minerals

The X-ray absorption near edge spectroscopy technique (XANES) has been applied to determine the crosslinking structure of natural rubber (NR) during sulfur vulcanization process. The NR samples were prepared using DCBS as an accelerator at different sulfur to DCBS ratios (from 0.26 to 6.67). The results showed that with increasing cure time from tc50 to tc70, tc90 and tc100 the position of sulfur peak shifted to higher energy. This implied that the amount of polysulfidic crosslink gradually decreased with increasing cure time. This result supported the crosslinking mechanism proposed in the literature at which the polysulfidic crosslink is dominating at …

Influence Of Poly(Butylene Terephthalate) And Wollastonite On Properties Of Recycled Poly(Ethylene Terephthalate) Preforms, Phasawat Chaiwutthinan, Thaksaporn Riyaphan, Athapon Simpraditpan, Amnouy Larpkasemsuk

Journal of Metals, Materials and Minerals

Influence of poly(butylene terephthalate) (PBT) and wollastonite (WLN) on properties of recycled poly(ethylene terephthalate) (RPET) was investigated. RPET was first melt-mixed with PBT at five loadings (10-50 wt%) on a twin screw extruder, and then injection molded. Scanning electron micrographs showed the immiscible blends. The blends at 10-40 wt% PBT displayed droplet-matrix morphology, while the blend at 50 wt% PBT showed a matrix inversion. All blends showed a PBT-dosedependent increase in impact strength and Young's modulus with an expense of tensile strength and elongation at break. Among five RPET/PBT blends, the one at 40 wt% PBT exhibited the good balanced …

Ten Questions Concerning The Implications Of Carpet On Indoor Chemistry And Microbiology, Sarah R, Haines, Rachel I. Adams, Brandon E. Boor, Thomas A. Bruton, John Downey, Andrea R. Ferro, Elliott T. Gall, Multiple Additional Authors

Mechanical and Materials Engineering Faculty Publications and Presentations

Carpet and rugs currently represent about half of the United States flooring market and offer many benefits as a flooring type. How carpets influence our exposure to both microorganisms and chemicals in indoor environments has important health implications but is not well understood. The goal of this manuscript is to consolidate what is known about how carpet impacts indoor chemistry and microbiology, as well as to identify the important research gaps that remain. After describing the current use of carpet indoors, questions focus on five specific areas: 1) indoor chemistry, 2) indoor microbiology, 3) resuspension and exposure, 4) current practices …

Solution Anneal Heat Treatments To Enhance Mechanical Performance Of Additively Manufactured Inconel 718, David J. Newell

Theses and Dissertations

The nickel-based superalloy Inconel 718 (IN718) is an excellent candidate among aerospace alloys for laser powder-bed fusion (LPBF) manufacturing. As-built LPBF IN718 has a vertically aligned columnar (001) microstructure which translates into orthotropic mechanical behavior. The post-process heat treatments for IN718 were developed 60 years ago for wrought and cast processes and do not mitigate the columnar microstructure of the LPBF process. Recrystallization is required to remove the columnar microstructure, which would allow for parts to be fabricated on different machines or in different orientations but still achieve the same properties. This research investigated the microstructure of LPBF IN718 as …

Cn And C2 Spectroscopy On The Pulsed Ablation Of Graphite In The Visible Spectrum, Brandon A. Pierce

Theses and Dissertations

An experimental study was conducted on the nanosecond pulsed laser ablation of graphite using a KrF laser at a fluence of 3.8 J/cm² in Air, Ar, He, and N₂. Optical emissions spectroscopy revealed the C₂ Swan sequences and the CN Violet sequences. A spectroscopic model was developed to extract the molecular rotational and vibrational temperatures of each excited species for t=0.5-10 microseconds after laser irradiation. The rovibrational temperatures were found to vary with background gas for the CN Violet; however, only the vibrational temperature varied between He and the other background gases for C₂ Swan. …

Design, Development, And Testing Of A Low Cost, Additively-Manufactured, Centrifugal Compressor, Aaron P. Bauer

Theses and Dissertations

The three objectives of this research were to: 1.) design, build, and test AM compressors to substitute into COTS micro-gas turbine engines, 2.) provide initial correlations between FEA and compressor failure speed, and 3.) characterize the effects of AM on compressor performance. These goals improved the design cycle cost and the design-validation time cycle. ULTEM 9085, 300-AMB, and Onyx-Kevlar temperature-dependent tensile properties were measured. FEA-predicted failure speeds of stock compressor designs led design improvements, potentially fulfilling the original compressor requirements. Physical testing of the stock and ULTEM 9085 compressors occurred. Comparing these compressors' performances demonstrated that low cost, AM materials …

Fatigue Behavior Of An Advanced Melt-Infiltrated Sic/Sic Composite With Environmental Barrier Coating At 1200°C In Air And In Steam, Thaddeus M. Williams

Theses and Dissertations

Advanced aerospace applications such as aircraft turbine engine components, hypersonic flight vehicles, and spacecraft reentry thermal protection systems require structural materials that have superior long-term mechanical properties under high temperature, high pressure, and varying environmental factors, such as moisture. Because of their low density, high strength and fracture toughness at high temperatures SiC fiber-reinforced SiC matrix composites are being evaluated for aircraft engine hot-section components. In these applications the composites will be subjected to various types of mechanical loadings at elevated temperatures in oxidizing environments. Because their constituents are intrinsically oxidation-prone, the most significant problem hindering SiC/SiC composites is oxidation …

Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The development of highly efficient oxygen reduction reaction (ORR) catalysts is the key to the commercialization of fuel cells, where the sluggish ORR reaction rate needs to be overcome by adjusting the intermediates adsorption energies on the catalytic surfaces. To-date, platinum (Pt)-based materials are the-state-of-the-art catalysts in terms of both activity and stability in ORR, making them the preferred choice for commercial applications. However, the high cost of Pt-based catalysts limits their widespread use, leading to massive effects paid in reducing Pt loading, improving catalyst activity and stability. This article illustrates the challenges in the ORR reaction and introduces the …

Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang

Journal of Electrochemistry

The electrodes of Ni foam supported NiCo₂O₄ nanowires were prepared by hydrothermal method, followed by a thermal treatment in air, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that the NiCo₂O₄ nanowires had a diameter of about 50 nm with a length up to 3 ~ 5 μm. The catalytic performances of the Ni foam supported NiCo₂O₄ nanowires for H₂O₂ electrooxidation were studied by cyclic voltammetry and chronoamperometry. The results show that the Ni foam supported NiCo …

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng

Journal of Electrochemistry

Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …

Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

Nickel-rich ternary materials with large reversible capacity as well as high operating voltage are considered as the most promising candidate for next generation lithium-ion batteries (LIBs). However, the inferior cycle stability and thermal stability have limited their widely commercial applications. Concentration gradient design of Ni-Co-Mn/Al ternary concentration gradient materials have been extensively studied in the past decade, which can ensure high cycle capacity while maintaining excellent cycle stability. In this paper, the latest research progresses in Ni-Co-Mn/Al ternary concentration gradient materials for LIBs are reviewed. Firstly, we summarize the different synthesis methods of ternary concentration-gradient materials, especially focusing on the …

Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen

Journal of Electrochemistry

Positive material Li₂MnO₃ shows the highest ratio of lithium to manganese among lithium-rich materials and exhibites the theoretical capacity up to 458 mAh·g^-1, making it one of the most promising cathode materials. However, this material has the intrinsic low electrical conductivity and poor cycle stability. In this paper, Li₂MnO₃, the lithium-rich positive material, was prepared by sol-gel method using acetate as raw material and citric acid as a complexing agent. By using SnC₂O₄ as a tin source, Sn⁴⁺ instead of Mn⁴⁺ was introduced to obtain the …

Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang

Journal of Electrochemistry

Carbon layers with different thicknesses were introduced into the surfaces of silicon (Si) nanoparticles by sol-gel method using poly (cyclotriphosphazene-co-4, 4'-sulfonyldiphenol) as the carbon source. Technologies of X-ray diffraction, thermo-gravimetric analysis, Brunauer-Emmett-Teller and transmission electron microscopy were employed to analyze the structures and components of the as-prepared Si@C_PZS composites. Electrochemical performance of Si@C_PZS with different carbon thicknesses was studied. The results showed that Si@C_PZS with carbon thickness of 10 nm possessed the best performance. Its capacity remained 940 mAh·g^-1 after 290 cycles under 500 mA·g^-1. As the addictive, the graphite-based anode contained 30% of …

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li

Journal of Electrochemistry

The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni²⁺ to Fe³⁺ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen

Journal of Electrochemistry

In recent years, the rapid growing in the electric vehicle market has raised higher requirement on the lithium-ion batteries (LIBs) performance towards energy density and safety. However, considering the successful development of LIBs techniques in the past 30 years, there is little room left for improving the LIBs performance on the aspects related to the electrode materials, battery structure design and production processes. It is important to pursue more comprehensive fundamental understanding in the entire system and working principle of LIBs. Solid electrolyte interphase (SEI), existing between the electrode material and the electrolyte, has been proved to be an important …

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun

Journal of Electrochemistry

The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen

Journal of Electrochemistry

In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO₂ from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO₂ reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …

Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian

Journal of Electrochemistry

Non-noble metal catalysts with high activity and low cost have attracted increasing interest as potential catalysts for oxygen reduction reaction (ORR) to replace Pt-based catalysts. In this paper, the effect of nitrogen content in catalyst precursor on ORR activity of FeN/C catalyst was investigated by X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET) surface area and pore size distribution measurements, transmission electron microscope (TEM), thermogravimetric analysis (TGA), and rotating disk electrode (RDE) techniques. The results show that the most active catalyst was obtained by pyrolysis in argon at 1050 °C with a catalyst precursor containing 20wt% 1,10-phenanthroline, 1wt% Fe and Black Pearl 2000. …

Effects Of Intrinsic Defects And Alloying With Fe On The Half-Metallicity Of Co2Mnsi, G. G. Baez Flores, Ivan A. Zhuravlev, Kirill Belashchenko

Kirill Belashchenko Publications

The electronic structure and half-metallic gap of Co2MnSi in the presence of crystallographic defects, partial Fe substitution for Mn, and thermal spin fluctuations are studied using the coherent potential approximation and the disordered local moment method. In the presence of 5% Co or Mn vacancies the Fermi level shifts down to the minority-spin valence-band maximum. In contrast to NiMnSb, both types of Mn antisite defects in Co2MnSi are strongly exchange coupled to the host magnetization, and thermal spin fluctuations do not strongly affect the half-metallic gap. Partial substitution of Mn by Fe results in considerable changes in the Bloch spectral …

Anomalous Eutectic Microstructures In Mg–Al Structural Alloy Prepared By Rapid Solidification, Soodabeh Azadehranjbar, Jian Wang, Jeffrey E. Shield

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Magnesium is the lightest engineering metal 1 However, conventional Mg alloys typically suffer from low strength and poor deformability due to very few slip systems and easy twinning 3 Alloying Mg with other materials and microstructural engineering are promising approaches to increase ductility and strength of Mg In the current work, non equilibrium solidification conditions were applied to induce a transition from regular to anomalous eutectic in Mg Al eutectic alloy such that four distinguished microstructures were acquired and the corresponding formation mechanisms were investigated

Architecture And Trilogy Of (Law, Theory And Hypothesis), Ahmed Hashim Hameed

Al-Esraa University College Journal for Engineering Sciences

The general cognitive expositions had focused on the study of the general knowledge frameworks of the field of architecture, with both concepts that influencing and influenced by them, which used to contain them without referring to their intellectual origins in order to understand their general effect and their role in the cognitive enrichment to the architectural field. This, in return, showed the importance of direction to study the role, influence and effect of trilogy (Law, theory and hypothesis) in the field of architecture, according to their general reality knowledge and their specific theoretical and intellectual characteristics. This research deals with …

The Impact Of Spatial Location Of Functions To Identify Architectural Forms As A Landmark (Case Study - Contemporary Islamic Architecture -), Ibtisam Abdulelah Mohammed Al Khafaji, Maha Haki Ismaeil

Al-Esraa University College Journal for Engineering Sciences

This research discusses the impact of spatial location of functions inside architectural form to enhance visual legibility and how it can improve the possibilities of identifying them as a landmark. The absence of a clear conceptual frame which can be used to describe this impact forms the basic research problem. The objective aim of the research is to clarify and describe this impact. To achieve this objective aim, an analytical process was used. We supposed that spatial location of functions enhances visual legibility of forms, then improves our possibility of identifying them as a landmark. For applying the conceptual frame, …

Effect Of Loading Level Of Hybrid Reinforced Concrete Deep Beams Under Repeated Loading, Sawsan Akram Hassan, Ghsoon Ali Faroun

Al-Esraa University College Journal for Engineering Sciences

This research is devoted to investigating the experimental and theoretical behavior of hybrid deep beams under monotonic and repeated two-point loading. The dimensions and the flexural reinforcement of the deep beams were kept constant. In this work, the idea of a hybrid beam is completely different. Two types of concrete were used but not in the cross-section. The first type, which is fiberous concrete (FC), was used in casting beam sides (shear spans), while the second type was conventional concrete (CC) which was used in the middle portion of the beam (between two shear spans). This was done to strengthen …

Reverse Osmosis Method For Sulphate Re-Moval From Treated Wastewater Of Al-Doura Refinery, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

The treated wastewater by the industrial Wastewater Treatment Plant (WWTP) commonly named (INGECO) in Al-Doura refinery suffers from highly sulfate concentrations that exceed the EPA specified limits of 250 mg/L. Therefore, laboratory water quality historical data have been reviewed and analyzed to determine the annual rate, maximum, and peak sulfate concentrations that were found to be 360 mg/L, 425 mg/L, and 550 mg/L, respectively. Through field inspection aimed at specifying the reasons for the high sulfate concentrations in the wastewater of most refinery process units, it was found that the maximum required sulfate remaining concentration should not exceed 10 mg/L …

Comparison Between Regular And Irregular Configuration In Earthquake Resistant Design, Ali Nur-Aldeen Azeez, Ali Mohsen Jaafer Al-Khafaji

Al-Esraa University College Journal for Engineering Sciences

Earthquake-resistant design is one of the greatest challenges that must be considered by the Architect because it is a serious natural disaster that affects the stability and durability of the building. Due to the connection between the seismic behavior of buildings with its formal configuration and the differences in seismic resistance between regular and irregular buildings, the research problem presented as the confusion of seismic behavior of irregular buildings and their difference from the regular buildings when earthquakes occur. The aim of the research is to clarify the differences between regular and irregular configurations, also clarifying the design considerations in …

Pedestrian Movement Within Residential Areas, Abd Alali Hamza Mohamed

Al-Esraa University College Journal for Engineering Sciences

The network of transport within residential areas, especially within residential neighborhoods, consists mainly of roads designed to provide relative safety for road users and to prioritize solutions that enhance safety. It is believed that the pedestrian movement network should be separated from the car movement network, with a focus on road design, pedestrian paths, and the types of vehicles used in these areas to ensure safety. This research explores the solutions developed in the planning of roads and walkways in traditional housing schemes within the urban fabric of old cities. It examines the approaches and conclusions of modern models of …

Low-Grade Kaolin Clay Natural Resource For Use As A Supplementary Cementitious Material In Structural Concrete Elements, Brandon X. Lorentz

USF Tampa Graduate Theses and Dissertations

At the turn of the century, low-grade kaolin clay (LGK) was presented as a widely available and potential natural resource of supplementary cementitious materials (SCM) for producing high performance concretes. In using LGK as an SCM, clinker production is reduced, aiding environmental concerns with associated CO2 emissions. These types of clays have very heterogeneous mineralogy and microstructural characteristics, causing unique influences on concrete structural and flow performance, although these influences are not well understood. This research studies LGK natural to the state of Florida and assesses their potential use as high performance SCM.

Ten kaolin clays were obtained through a …

Protein-Polysaccharide Composite Materials: Fabrication And Applications., Elizabeth J Bealer, Shola Onissema-Karimu, Ashley Rivera-Galletti, Maura Francis, Jason Wilkowski, David Salas-De La Cruz, Xiao Hu

College of Science & Mathematics Departmental Research

Protein-polysaccharide composites have been known to show a wide range of applications in biomedical and green chemical fields. These composites have been fabricated into a variety of forms, such as films, fibers, particles, and gels, dependent upon their specific applications. Post treatments of these composites, such as enhancing chemical and physical changes, have been shown to favorably alter their structure and properties, allowing for specificity of medical treatments. Protein-polysaccharide composite materials introduce many opportunities to improve biological functions and contemporary technological functions. Current applications involving the replication of artificial tissues in tissue regeneration, wound therapy, effective drug delivery systems, and …

Vêtements De Protection Chimique Contre Les Aérosols Solides : Performances Des Matériaux Sous Différentes Conditions D'Exposition Et Caractérisation Des Déterminants, Ludovic Tuduri, Loïc Wingert, Yves Cloutier, Stéphane Hallé, Jean Luc Giraudel, Ali Bahloul, Dominic Tessier, Patricia Dolez

Rapports de recherche scientifique

Historiquement, les mesures jugées prioritaires en hygiène industrielle ont été orientées vers la prévention de l’exposition par les voies respiratoires. Des centaines de valeurs limites d’exposition ont ainsi pu être établies à partir de méthodes d’évaluation quantitative du risque.

La part de l'exposition cutanée dans l’exposition professionnelle aux substances toxiques est pourtant significative. Le National Institute for Occupational Safety and Health (NIOSH) estime à 13 millions le nombre de travailleurs exposés à des produits chimiques par la peau avec des coûts annuels induits par le traitement des troubles cutanés évalués à un milliard de dollars. Il n’existe pas de données …