Electrical and Electronics Commons^™

One-Stage Blind Source Separation Via A Sparse Autoencoder Framework, Jason Anthony Dabin

Dissertations

Blind source separation (BSS) is the process of recovering individual source transmissions from a received mixture of co-channel signals without a priori knowledge of the channel mixing matrix or transmitted source signals. The received co-channel composite signal is considered to be captured across an antenna array or sensor network and is assumed to contain sparse transmissions, as users are active and inactive aperiodically over time. An unsupervised machine learning approach using an artificial feedforward neural network sparse autoencoder with one hidden layer is formulated for blindly recovering the channel matrix and source activity of co-channel transmissions. The BSS sparse autoencoder …

Improving The Performance And Evaluation Of Computer-Assisted Semen Analysis, Ji-Won Choi

Dissertations

Semen analysis is performed routinely in fertility clinics to analyze the quality of semen and sperm cells of male patients. The analysis is typically performed by trained technicians or by Computer-Assisted Semen Analysis (CASA) systems. Manual semen analysis performed by technicians is subjective, time-consuming, and laborious, and yet most fertility clinics perform semen analysis in this manner. CASA systems, which are designed to perform the same tasks automatically, have a considerable market share, yet many studies still express concerns about their accuracy and consistency. In this dissertation, the focus is on detection, tracking, and classification of sperm cells in semen …

Outdoor Operations Of Multiple Quadrotors In Windy Environment, Deepan Lobo

Dissertations

Coordinated multiple small unmanned aerial vehicles (sUAVs) offer several advantages over a single sUAV platform. These advantages include improved task efficiency, reduced task completion time, improved fault tolerance, and higher task flexibility. However, their deployment in an outdoor environment is challenging due to the presence of wind gusts. The coordinated motion of a multi-sUAV system in the presence of wind disturbances is a challenging problem when considering collision avoidance (safety), scalability, and communication connectivity. Performing wind-agnostic motion planning for sUAVs may produce a sizeable cross-track error if the wind on the planned route leads to actuator saturation. In a multi-sUAV …

Integrated Circuits Parasitic Capacitance Extraction Using Machine Learning And Its Application To Layout Optimization, Mohamed Saleh Abouelyazid Saleh

Theses and Dissertations

The impact of parasitic elements on the overall circuit performance keeps increasing from one technology generation to the next. In advanced process nodes, the parasitic effects dominate the overall circuit performance. As a result, the accuracy requirements of parasitic extraction processes significantly increased, especially for parasitic capacitance extraction. Existing parasitic capacitance extraction tools face many challenges to cope with such new accuracy requirements that are set by semiconductor foundries (< 5% error). Although field-solver methods can meet such requirements, they are very slow and have a limited capacity. The other alternative is the rule-based parasitic capacitance extraction methods, which are faster and have a high capacity; however, they cannot consistently provide good accuracy as they use a pre-characterized library of capacitance formulas that cover a limited number of layout patterns. On the other hand, the new parasitic extraction accuracy requirements also added more challenges on existing parasitic-aware routing optimization methods, where simplified parasitic models are used to optimize layouts.

This dissertation provides new solutions for interconnect parasitic capacitance extraction and parasitic-aware routing optimization methodologies in order to cope with the new accuracy requirements of advanced process nodes as follows. …

Quantitative Dynamic Cellular Imaging Based On 3d Unwrapped Optical Coherence Phase Microscopy, Arunkumar Gunasekar

Theses

Phase wrapping artifacts are frequently encountered in phase resolved imaging and sensing techniques based on interferometry. When the value of the actual phase (φ) ranges beyond (-π, π], the extracted phase value (wrapped phase Ψ) is artificially increased or decreased by a multiple of 2π.

In this study, we develop a 3D phase unwrapping method that exploits the correlation of 3D phase data (φ(x,y,t)) over the other dimension (t). We validate our 3D unwrapping method using simulated data, as well as experimental data obtained by optically computed phase microscopy (OCPM) recently developed in our lab. Our results show that the …

Transformer Fault Event Detection And Classification Using Pmus, Yadunandan Paudel

Theses and Dissertations

Transformer is one of the most reliable components in an electric power system, however its failure has huge opportunity costs for an electric utility. In this work, we detect transformer electrical faults promptly and accurately classify the fault types using voltage/current data from Phasor Measurement Units. Our work can also eliminate uncertainties which are inherent in traditional transformer fault diagnostic techniques like dissolved gas analysis. In this thesis, first, possible causes of transformer failures are discussed, and four common transformer electrical faults are identified. Second, a comprehensive simulation model for electrical faults is developed. Third, fast and efficient abrupt change …

Challenges And Signal Processing Of High Strain Rate Mechanical Testing, Barae Lamdini

Theses and Dissertations

Dynamic testing provides valuable insight into the behavior of materials undergoing fast deformation. During Split-Hopkinson Pressure Bar testing, stress waves are measured using strain gauges as voltage variations that are usually very small. Therefore, an amplifier is required to amplify the data and analyze it. One of the few available amplifiers designed for this purpose is provided by Vishay Micro-Measurements which limits the user’s options when it comes to research or industry. Among the challenges of implementing the Hopkinson technology in the industry are the size and cost of the amplifier. In this work, we propose a novel design of …

Receptor-Doped Organic Transistors: Transducing Anion Binding From Mixed Ionic-Electronic Transport, Anthony Benasco

Dissertations

Organic semiconductors based on π-conjugated polymers show remarkable properties such as high tolerance to structural defects, low processing temperature requirements, biocompatibility, ease of fabrication, and tunable properties. Conjugated polymers integrated into device arrays can exhibit collective properties sensitive to minor perturbations in the surrounding media. However, these devices rely on serendipitous sensitivity to the analyte of interest, and strategies for specific detection remain a considerable change. There remains a compelling, global need for technologies to monitor phosphate due to its prevalence in agricultural runoff, leading to fish kills and economic decline for commercial and recreational fisheries. The strong hydration energies …

A Broadband Cp Elliptical-Slot Antenna For Ambient Rf Energy Harvesting, Khatereh Nadali, Patrick Mcevoy, Max Ammann

Conference papers

In this paper, a compact broadband CPW-fed circularly polarised elliptical-slot antenna with an inverted- L tuning stub is proposed. The antenna impedance is optimized for broadband operation from 1.62 GHz to 2.97 GHz. The measured CP bandwidth is 934 MHz (1.747-2.681 GHz), that covers common wireless communication bands GSM 1800, GSM 1900, 3G/LTE 2100, 3G/LTE 2300, 4G/LTE 2500, and 2.4GHz Wi-Fi bands. This makes the designed antenna an appropriate candidate for ambient RF energy harvesting purposes.

Worksheet 01 - Monopole, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet guides users on modeling a quarter-wavelength monopole antenna on an infinite ground plane and observing its characteristics. The worksheet starts with parameter settings and continues on to antenna design, boundary setting, radiation setting, and then to simulation and viewing the results.

Worksheet 04 - Dipole, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet shows how to create a half-wavelength dipole, set the feeder through a port, observe directivity, half-power beamwidth, etc.

Worksheet 05 - Loop, Ashanthi Maxworth Phd

Antenna Design With HFSS

In this worksheet, the users can design a small loop. The small loop shows low directivity, hence at the end of the worksheet, the users can chanage the design parameters and increase the directivity.

Worksheet 07 - Bicone, Ashanthi Maxworth Phd

Antenna Design With HFSS

In this worksheet, setps are given to design a full-wavelength biconical antenna. This is a broadband antenna. The worksheet also shows how to observe surface currents.

Worksheet 06 - Arrays, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet designs an antenna array with three identical dipole elemetns. The antenna is operating as a broadside array. By changing the parameters the users can view the grating lobes in addition to the main lobe.

Worksheet 09 Horn, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet designs a pyramidal horn antenna fed by a waveport.

Worksheet 03 - Near Field, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet guides students to change the observational region between, reactive near field, radiating near field, and far-field.

Worksheet 08 - Helix, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet creates a helical antenna operating in the axial mode. The antenna is mounted on a ground plane. The users can change the circumference of the helix and change the operating mode to broadside or conical if they wish.

Worksheet 10 - Patch, Ashanthi Maxworth Phd

Antenna Design With HFSS

In this worksheet, steps are given to create a slotted rectangular microstrip patch antenna with an inset feed using a stripline. The patch antenna is operating in the TM10 mode.

Worksheet 02 - Meshing, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet is designed to oberserve the variations in results when the mesh is varied from coarse to fine, hence how to find the optimum mesh size such that we can get accurate results while not compromising computational power.

Automated Robotic Light Bulb Testing Platform, Agha I. Akram, Muhammad Ali Ummy

Publications and Research

The main purpose of this project is to create a functional prototype of a multilayered system that incorporates aspects of electrical, mechanical, and computer engineering technology. The main objective of the system is to be able to determine whether a light bulb is working or not. The building blocks of this system are a robotic arm that is able to slide along a rail (for added mobility), a conveyor belt, and an electromechanical device that holds and tests light bulbs. Initially, the robot arm picks up a light bulb and places it into the holder which then tests it. A …

Hinged Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Jeremiah C. Williams, Hengky Chandrahalim

AFIT Patents

A passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes a three-dimensional microscopic optical structure formed on a cleaved tip of the optical fighter using a two-photon polymerization process on a photosensitive polymer by a three-dimensional micromachining device. The three-dimensional microscopic optical structure having a hinged optical layer pivotally connected to a distal portion of a suspended structure. A reflective layer is deposited on a mirror surface of the hinged optical layer while in an open position. The hinged optical layer is subsequently positioned in the closed position to align the mirror surface to at least partially reflect a light signal back …

Design Of A Bandgap Voltage Reference, Nicolaus Vail

Electrical Engineering Undergraduate Honors Theses

This thesis details the design process of a bandgap voltage reference (BGR) integrated circuit in a 180 nm CMOS process. A BGR provides a constant DC voltage across a range of operating temperatures and supply voltages. By its nature, the circuit is intended as a reference, not to provide current, so the output would be connected to a very high impedance, such as the gate of a transistor. At 27°C, this design provides a 955 mV reference voltage given a nominal VDD of 3 V. From 20°C to 175°C, the output voltage has a variance of 7.2 mV (approximately 0.8%) …

Signal Analysis Of Photovoltaic Systems For Multilevel Cybersecurity, Wesley G. Schwartz

Electrical Engineering Undergraduate Honors Theses

The cybersecurity of grid-connected power electronics is a rapidly developing field as more and more of these devices become a part of the Internet of Things. The objective of this thesis to analyze the current control signals of a photovoltaic (PV) inverter and develop an interface board for the implementation of a new cyber-secure controller.

In this thesis, the testing and in-depth analysis of the current PV inverter control system will be conducted. Using the data collected, an interface board will be developed to allow the use of the Unified Control Board (UCB), developed by Chris Farnell, in the PV …

Grid-Connected Renewable Energy Systems For Residential Hvac Load Management, Oscar Samuel Acosta

Open Access Theses & Dissertations

With an ongoing mission of utility operators to maintain a resilient and reliable power grid in the face of continuously increasing load demand, it is essential that advancements be made in developing both technology and methodology to help account for the increasing energy requirements. According to the U.S. Department of Energy (DOE) and Energy Information Administration (EIA), the residential end-use sector alone counted for 22% of all electricity used in the U.S. in 2020. Of this, approximately 32% of household electricity load is the direct result of air conditioning and space heating units (HVAC). One way to account for this …

High Power Density And High Efficiency Converter Topologies For Renewable Energy Conversion And Ev Applications, Dereje Lemma Woldegiorgis

Graduate Theses and Dissertations

This dissertation work presents two novel converter topologies (a three-level ANPC inverter utilizing hybrid Si/SiC switches and an Asymmetric Alternate Arm Converter (AAAC) topology) that are suitable for high efficiency and high-power density energy conversion systems. The operation principle, modulation, and control strategy of these newly introduced converter topologies are presented in detail supported by simulation and experimental results. A thorough design optimization of these converter topologies (Si/SiC current rating ratio optimization and gate control strategies for the three-level ANPC inverter topology and component sizing for the asymmetric alternate arm converter topology) are also presented.

Performance comparison of the proposed …

Automatic Testing Of Organic Strain Gauge Tactile Sensors., Brian P. Goulet

Electronic Theses and Dissertations

Human-Robot Interaction is a developing field of science, that is posed to augment everything we do in life. Skin sensors that can detect touch, temperature, distance, and other physical interaction parameters at the human-robot interface are very important to enhancing the collaboration between humans and machines. As such, these sensors must be efficiently tested and characterized to give accurate feedback from the sensor to the robot. The objective of this work is to create a diversified software testing suite that removes as much human intervention as possible. The tests and methodology discussed here provide multiple realistic scenarios that the sensors …

Electric Power Grid Resilience Under Extreme Weather Events, Orlando Quezada Simental

Open Access Theses & Dissertations

Electric power distribution grids are experiencing blackouts at higher rates than ever before due to extreme weather, leaving hundreds of customers without electric energy for hours or even days. While these events are considered low-probability events, the socioeconomic costs and impacts are extensive as the distribution systems are unreliable under emergency events. The improvement of the resilience of the power distribution system can be accomplished through the implementation of microgrids (MGs) throughout the grid, which can be constituted by distributed energy resources (DERs) such as solar roof-top PV generation and electric vehicles (EVs) and many others. The development of new …

Development Of An Automated Electronic Prototyping System, Cesar Yahir Sanchez Zambrano

Open Access Theses & Dissertations

Prototyping systems with interconnected components can be a time and resource expensive process. The process consists of three main phases (design, build and analysis) with each having their own associated cost. For the case of electronic circuits, the building phase is the costliest phase among the three, being prone to human errors which causes the circuit to fail. All three phases of the prototyping process are important. However, often a disproportionate amount of time is spent on the build phase due to the difficulty of making and troubleshooting circuits by hand. In this thesis we will discuss a system that …

Analysis And Optimization Of The Two-Phase Series Capacitor Buck Dc-Dc Converter, Salahaldein Ali Aboajila Ahmed

Graduate Theses and Dissertations

Current sharing schemes for conventional multi-phase converters are based on sensing each phase current to deliver the current information to their controllers. In conventional buck converters, this fact may require a preset current sharing ratio at the expense of efficiency, which eventually requires a larger sensing circuit to achieve the sensing accuracy of each phase. Introducing the concept of automatic current sharing is one of the solutions to tackle this issue. Automatic current sharing (Current Sharing Mechanism CSM) is an advanced way to distribute heat generation in multi-phase switching topologies at full load. A two-phase series capacitor buck converter (2-pscB) …

Photoassisted Nanoscale Memory Resistors, Amir Shariffar

Graduate Theses and Dissertations

Memristors or memory resistors are promising two-terminal devices, which have the potential to revolutionize current electronic memory technologies. Memristors have been extensively investigated and reported to be practical devices, although they still suffer from poor stability, low retention time, and laborious fabrication processes.

The primary aim of this project was to achieve a device structure of quantum dots or thin films to address a fundamental challenge of unstable resistive switching behavior in memristors. Moreover, we aimed to investigate the effects of light illumination in terms of intensity and wavelength on the performance of the fabricated memristor. The parameters such as …