Electrical and Electronics Commons^™

Low Power Multi-Channel Interface For Charge Based Tactile Sensors, Samuel Hansen

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Analog front end electronics are designed in 65 nm CMOS technology to process charge pulses arriving from a tactile sensor array. This is accomplished through the use of charge sensitive amplifiers and discrete time filters with tunable clock signals located in each of the analog front ends. Sensors were emulated using Gaussian pulses during simulation. The digital side of the system uses SAR (successive approximation register) ADCs for sampling of the processed sensor signals.

Adviser: Sina Balkır

Optimized Learning Using Fuzzy-Inference-Assisted Algorithms For Deep Learning, Miroslava Barua

Open Access Theses & Dissertations

For years, researchers in Artificial Intelligence (AI) and Deep Learning (DL) observed that performance of a Deep Learning Network (DLN) could be improved by using larger and larger datasets coupled with complex network architectures. Although these strategies yield remarkable results, they have limits, dictated by data quantity and quality, rising costs by the increased computational power, or, more frequently, by long training times on networks that are very large. Training DLN requires laborious work involving multiple layers of densely connected neurons, updates to millions of network parameters, while potentially iterating thousands of times through millions of entries in a big …

Processes & Toolchain For Automation Of Hybrid Direct-Write 3d Printing, Gilbert Thomas Carranza

Open Access Theses & Dissertations

Hybrid 3D printing has evolved from a means to rapidly prototype devices to a fully viable means of manufacturing final products. In particular, electronic and electromagnetic devices have been a focus of hybrid 3D printing multi material structures. However, while the hardware capabilities have been around for years, the software capabilities have only begun to catch up. A process and toolchain for hybrid 3D printing is critically needed.This work details a process and toolchain for hybrid 3D printing metal dielectric structures. In it, a basic slicing algorithm is shown along with off-axis printing and conformal printing for arbitrary curvatures. These …

Diy Cell Incubator, Hayden James Jeanor

Electrical Engineering

The purpose of creating a cell Incubator is for the development of cell and tissue production in laboratory settings. Large scale research projects and the medical community grow cells for various reasons, including experiments and creating tissue for patients. However, they cannot simply depend on growing cells in a petri dish that sit on a rack at room temperature. To grow heathy cells in the fastest way possible, they use cell incubators. Cell incubators create an atmosphere within the incubation bay that is designed to promote cell growth. The three main components that need to be constantly regulated, using a …

Permanently-Installed Distributed Pressure Sensors For Downhole Applications, Xuran Zhu

All Dissertations

Technology advancements (e.g., hydraulic fracturing and horizontal drilling) to recover unconventional oil and gas (UOG) resources are critical in maintaining future U.S. oil and gas production levels. Permanently installed distributed downhole pressure sensors could monitor fracture propagation, assess the effectiveness of hydraulic fracturing, and optimize hydraulic fracturing placement so that overall UOG recovery efficiency can be increased. However, the harsh environment (high temperatures, high pressures, strong vibration, and presence of brine, mud, debris, hydrate, and various gases), the long data telemetry distance, and the requirements of reliability and service lifetime make the downhole monitoring a very challenging task. To combat …

Multi-Criteria Performance Evaluation And Control In Power And Energy Systems, Payam Ramezani Badr

All Dissertations

The role of intuition and human preferences are often overlooked in autonomous control of power and energy systems. However, the growing operational diversity of many systems such as microgrids, electric/hybrid-electric vehicles and maritime vessels has created a need for more flexible control and optimization methods. In order to develop such flexible control methods, the role of human decision makers and their desired performance metrics must be studied in power and energy systems. This dissertation investigates the concept of multi-criteria decision making as a gateway to integrate human decision makers and their opinions into complex mathematical control laws. There are two …

Electrical Modeling For Dynamic Performance Prediction And Optimization Of Mcpms Layout, Quang Minh Le

Graduate Theses and Dissertations

In recent years, the fast development of Multichip Power Modules (MCPM) packaging and Wide Bandgap (WBG) technology has enabled higher voltage and current ratings, better thermal performance, lower parasitic parameters, and higher mechanical reliability. However, the design of the MCPM layout is a multidisciplinary problem leading to many time-consuming analyses and tedious design processes. Because of these challenges, the design automation tool for MCPM layout has become an emerging research area and gained much attention from the power electronics community. The two critical objectives of a design automation tool for MCPM layout are fast and accurate models for design insights …

Hybrid Multilevel Converters With Internal Cascaded/Paralleled Structures For Mv Electric Aircraft Applications, Fei Diao

Graduate Theses and Dissertations

Using on-board medium voltage (MV) dc distribution system has been a megatrend for next-generation electric aircraft systems due to its ability to enable a significant system mass reduction. In addition, it makes electric propulsion more feasible using MV power electronic converters. To develop high-performance high-density MV power converters, the emerging silicon carbide (SiC) devices are more attractive than their silicon (Si) counterparts, since the fast switch frequency brought by the SiC can effectively reduce the volume and weight of the filter components and thus increase the converter power density. From the converter topology perspective, with the MV dc distribution, the …

A Patient-Specific Algorithm For Lung Segmentation In Chest Radiographs, Manawaduge Supun De Silva, Barath Narayanan Narayanan, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Lung segmentation plays an important role in computer-aided detection and diagnosis using chest radiographs (CRs). Currently, the U-Net and DeepLabv3+ convolutional neural network architectures are widely used to perform CR lung segmentation. To boost performance, ensemble methods are often used, whereby probability map outputs from several networks operating on the same input image are averaged. However, not all networks perform adequately for any specific patient image, even if the average network performance is good. To address this, we present a novel multi-network ensemble method that employs a selector network. The selector network evaluates the segmentation outputs from several networks; on …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

Sers Platform For Single Fiber Endoscopic Probes, Debsmita Biswas

LSU Doctoral Dissertations

Molecular detection techniques have huge potential in clinical environments. In addition to many other molecular detection techniques, endoscopic Raman spectroscopy has great ability in terms of minimal invasiveness and real-time spectra acquisition. However, Raman Effect is low in sensitivity, limiting the application. Surface-Enhanced Raman Scattering (SERS), addresses this limitation. SERS brings rough nano-metallic surfaces in contact with specimen molecules which enormously enhances Raman signals. This provides Raman spectroscopy with immense capabilities for diverse fields of applications.

Generally, in clinical probe applications, the spectrometer is brought near the target molecules for detection. Typically, optical fibers are used to couple spectrometers to …

A Field-Deployable Quartz Crystal Microbalance System For Gas Detection, Jongyoon Park

LSU Doctoral Dissertations

Quartz crystal microbalance (QCM) has been widely studied as a mass sensing technique in laboratory environments and has shown a wide range of industrial applications such as food quality control, various forms of chemical detection, and biomolecular recognition under gas phase as well as liquid phase media. The construction of multi-sensor arrays combined with special sensor coatings enables multiple analyte detections and discrimination of multi-analyte along with statistical analysis. Despite the great sensing capabilities of QCM and growing interest in practical applications beyond the laboratory setup, most QCM studies are still performed in laboratory settings with benchtop QCM instruments. Therefore, …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Solid State Lighting/Led Lighting, With Reliability Analysis And Smart Sustainable Energy Solutions, Anjan N. Padmasali Dr.

Technical Collection

Reliability analysis of LED based lighting solutions used in general applications. Daily use LED luminaire performance analysis at different accelerated conditions and prediction of performance for any other conditions. System and component level reliability study and analysis. Develop LED based solutions for any specific application requirements. Currently working on developing measurements, data analysis and solutions in lines with providing smart and sustainable solution applicable to lighting and also energy usage optimizations in any system.

1. https://ieeexplore.ieee.org/document/9537294
2. https://journals.sagepub.com/doi/10.1177/1477153520976936
3. https://ieeexplore.ieee.org/document/9559924
4. https://ieeexplore.ieee.org/document/9108554
5. https://ieeexplore.ieee.org/document/8930628

Multi-Terminal Smart Transformer For Data Centre Applications, Anandh N

Technical Collection

With the increasing digitalization in recent times, cloud servers and data centres have gained significant attention. Renewable energy sources (RES) and battery energy storage systems (BESS) are inherent components of green data centres. This has led to an increasing need to develop efficient power electronic solutions. A multi-terminal smart transformer (MTST) is proposed for green data centre applications. The proposed system has the capacity to provide quality power both in the form of ac and dc at various required voltage levels. Moreover, the ac and dc terminals also offer the possibility of connecting alternative power sources such as RES or …

Disturbance-Observer Based Control For Pwm Rectifiers Without Dc Voltage Oscillations Under Unbalanced Grid Conditions, Mohammed Samer Al-Razehi

Theses

A three-phase controlled rectifier is a power electronic converter that employs the grid voltages as an input to produce a constant dc voltage at its output through the use of a capacitor, known as dc-link capacitor. However, the switching devices of power converters can create harmonics in the grid current, which mandates the need for filters to ensure high-quality grid current. This explains why the power converter is normally connected to the grid using passive filters such as L filter or LCL filter. The L filter is normally preferred over LCL filter to reduce harmonic distortions in grid currents as …

A Design Flow For Additively Manufactured 3d Metasurface Antennas​, Justin Parkhurst

Doctoral Dissertations and Master's Theses

Metasurface (MTS) antennas are complex arrays consisting of hundreds or thousands of individual elements that each exert their own influence on the performance of the antenna. Due to this, the process of designing and developing a MTS antenna can be intensive in terms of both the time to understand the how these antennas operate and time running calculations that achieve optimal performance. Through the use of automation for geometry creation in ANSYS HFSS, the work involved in making a MTS antenna can be greatly simplified. The overall objective of this thesis is to reduce the burden of constructing a MTS …

Study Of Stochastic Market Clearing Problems In Power Systems With High Renewable Integration, Saumya Sakitha Sashrika Ariyarathne

Operations Research and Engineering Management Theses and Dissertations

Integrating large-scale renewable energy resources into the power grid poses several operational and economic problems due to their inherently stochastic nature. The lack of predictability of renewable outputs deteriorates the power grid’s reliability. The power system operators have recognized this need to account for uncertainty in making operational decisions and forming electricity pricing. In this regard, this dissertation studies three aspects that aid large-scale renewable integration into power systems. 1. We develop a nonparametric change point-based statistical model to generate scenarios that accurately capture the renewable generation stochastic processes; 2. We design new pricing mechanisms derived from alternative stochastic programming …

Advancing Industrial Participation In Demand Response Within National Electricity Grids Through Systematic Asset Selection, Risk Assessment And Modelling Approaches, Alexander Brem

Theses

Increasing the flexible capacity on national electricity grids will be key to maintain reliable control as the levels of renewables continue to increase annually. The industrial sector has been identified as being capable of contributing and potentially offering flexible capacities, following appropriate investigation. The aim of this thesis is to develop the knowledge, advance the engagement and encourage additional participation in national demand response programmes from the industrial sector to provide this flexibility. The potential within this sector, facilitated by the smart grid and demand response concepts is outlined, specifically detailing their benefits, driving factors and potential barriers as part …

Developing Positive Thermal Coefficient (Ptc) Heaters For Solar Electric Cooking, Katarina Ivana Brekalo, Andrew Shepherd

Physics

Positive Thermal Coefficients, PTCs, are materials that abruptly change in resistance in response to changes in temperature. The purpose of this experiment is to explore the viability of using the switching type ceramic PTC thermistor as a replacement for current resistive heaters. These types of PTCs have a nonlinear change in resistance with increases in temperature. This device will be used as a temperature-controlling heating element intended to power an Insulated Solar Electric Cooker (ISEC). The ISEC is designed to cook meals throughout the day for impacted communities as an alternative cooking method that doesn’t require biofuel as an energy …

Studying Routing Issues In Vanets Using Ns-3 And Sumo, Mohammad Mahmoud Abdellatif, Omar E. Aly

Electrical Engineering

ehicular Ad-hoc Networks VANETs are normally sparse, highly dense, and highly mobile with many different and ever-changing topologies. These characteristics impose a challenge on finding a routing algorithm that fits the requirements of such network. The aim of this work is to study the performance issues of VANETs under different scenarios using realistic mobility models. In this paper, a comparative study is done among Ad-hoc On- Demand Distance Vector (AODV), Optimized Link State Routing (OLSR) and position-based routing protocols, namely Greedy Perimeter stateless routing (GPSR), and Max duration Min angle GPSR (MMGPSR). The comparison is done using key quality of …

Development Of Method To Characterize Adhesion Of Electrically Conductive Adhesive For Flexible Electronics, Joshua Corbin

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Developing A Self-Navigating Robot To Map Disaster Regions, Lily Compher

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

A New Method For Triggering Lithium-Ion Cell Internal Short Circuit (Isc) While Monitoring The Isc Current, Mary Long

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Low-Cost Compact Optical Spectroscopy And Novel Spectroscopic Algorithm For Point-Of-Care Real-Time Monitoring Of Nanoparticle Delivery In Biological Tissue Models, Zahid Hasan, Jing Yan, Zhongchao Yi, Madison O. Korfhage, Sheng Tong, Caigang Zhu

Markey Cancer Center Faculty Publications

Objective: Real-time monitoring of nanoparticle delivery in biological models is essential to optimize nanoparticle- mediated therapies. However, few techniques are available for convenient real-time monitoring of nanoparticle concentrations in tissue samples. This work reported novel optical spectroscopic approaches for low-cost point-of-care real-time quantification of nanoparticle concentrations in biological tissue samples.

Methods: Fiber probe measured diffuse reflectance can be described with a simple analytical model by introducing an explicit dependence on the reduced scattering coefficient. Relying on this, the changes on the inverse of diffuse reflectance are proportional to absorption change when the scattering perturbation is negligible. We developed this model …

An Inexpensive Maximum Power Point Tracking System For An Insulated Solar Electric Cooker Using An Off-The-Shelf Buck Converter, Andrew A. Perez

Physics

A specialized control circuit using an off-the-shelf buck converter is built for an Insulated Solar Electric Cooker (ISEC). Cost and efficient power delivery are the focus. An ISEC is synonymous to a direct load heat resistor, allowing a specific maximum power point tracking (MPPT) algorithm and fewer components. Only a microcontroller, voltage sensor, and digital-to-analog converter are used with the buck converter to maximize the power delivered by a 100W solar panel for the 3.3Ω load.

Design And Analysis Of A Discrete, Pcb-Level Low-Power, Microwave Cross-Coupled Differential Lc Voltage-Controlled Oscillator, Pavin Singh Virdee

Master's Theses

Radio Frequency (RF) and Microwave devices are typically implemented in Integrated Circuit (IC) form to minimize parasitics, increase precision and tolerances, and minimize size. Although IC fabrication for students and independent engineers is cost-prohibitive, an abundance of low-cost, easily accessible printed circuit board (PCB) and electronic component manufacturers allows affordable PCB fabrication.

While nearly all microwave voltage-controlled oscillator (VCO) designs are IC-based, this study presents a discrete PCB-level cross-coupled, differential LC VCO to demonstrate this more affordable and accessible approach. This thesis presents a 65 mW, discrete component VCO PCB with industry-comparable RF performance. A phase noise of -103.7 dBc/Hz …

Multichannel Blind Deconvolution Of Circularly Polarized Imagery, Patrick B. Cunningham

Theses and Dissertations

Current methods can be used to recreate an expected Stokes polarization vector from measured light for characterization purposes. However, this only applies to three of the Stokes parameters, that is, the linear polarization components. Circular polarization is not currently being utilized for object characterization because the mathematical complexity is greater than for that of linear polarization. This research will analyze a way to expand existing algorithms to include circular polarization and enable the complete reconstruction of the Stokes vector from the measured light into a blind deconvolution algorithm for Stokes estimation and image reconstruction.

Performance Analysis Of The Dominant Mode Rejection Beamformer, Enlong Hu

Dissertations

In array signal processing over challenging environments, due to the non-stationarity nature of data, it is difficult to obtain enough number of data snapshots to construct an adaptive beamformer (ABF) for detecting weak signal embedded in strong interferences. One type of adaptive method targeting for such applications is the dominant mode rejection (DMR) method, which uses a reshaped eigen-decomposition of sample covariance matrix (SCM) to define a subspace containing the dominant interferers to be rejected, thereby allowing it to detect weak signal in the presence of strong interferences. The DMR weight vector takes a form similar to the adaptive minimum …