Electrical and Electronics Commons^™

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf

Makara Journal of Technology

Magnetic field effect on CaCO3 precipitation is the key parameter in evaluating the effectiveness of Anti-scale Magnetic Treatment (AMT). The purpose of this study was to investigate magnetic fields influence on CaCO3 precipitation in high and low super-saturated CaCO3 solution by varied pH CaCO3 solution using circulation flow fluid system. The observation results in the high super saturated solution (pH 8.5) showed the increase of precipited CaCO3 in magnetized solutions compared to those in non-magnetic solution during circulation process. In the low super-saturated CaCO3 solution (pH 6.4) it was found that magnetic treatment increased CaCO3 precipitation after circulation process. In …

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian

Makara Journal of Technology

Intermetallic Cu3Sn Phase Layer on Electrode’s Tip of Galvanized Resistance Spot Welding. A resistance spot welding method is commonly used in automotive industries application. In a resistance spot welding method, the copper electrode has a significant role as an electric current carrier for joining thin metal sheet. This research was focused on studying the effect of tin layer at the electrode tip for joining galvanized steel sheet. The main variable of this research is in the thickness of the intermetallic Cu3Sn layer. The result showed that the introduction of tin layer less than 1 μm in thickness on the electrode …

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Simple ML Detector for Multiple Antennas Communication System. In order to support providing broadband wireless communication services against limited and expensive frequency bandwidth, we have to develop a bandwidth efficient system. Therefore, in this paper we propose a closed-loop MIMO (Multiple-Input-Multiple-Output) system using ML (Maximum Likelihood) detector to optimize capacity and to increase system performance. What is especially exciting about the benefits offered by MIMO is that a high capacity and performance can be attained without additional frequency-spectral resource. The grand scenario of this concept is the attained advantages of transformation matrices having capability to allocate transmitted signals power suit …

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto

Makara Journal of Technology

Potency of Thermoelectric Generator for Hybrid Vehicle. Thermoelectric Generator (TEG) has been known as electricity generation for many years. If the temperature difference occurred between two difference semi conductor materials, the current will flow in the material and produced difference voltage. This principle is known as Seebeck effect that is the opposite of Peltier effect Thermoelectric Cooling (TEC). This research was conducted to test the potential of electric source from twelve peltier modules. Then, these thermoelectric generators were applied in hybrid car by using waste heat from the combustion engine. The experiment has been conducted with variations of peltier module …

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman

Makara Journal of Technology

This study uses DEA solution to absorb CO2 from the gas flow through the hollow fiber membrane contactors. This study aims to evaluate the performance of hollow fiber membrane contactors to absorb CO2 gas using DEA solution as solvent through mass transfer and hydrodynamics studies. The use of DEA solution is to reduce the mass transfer resistance in the liquid phase, and on the other side, the large contact area of the membrane surface can cover the disadvantage of membrane contactors; additional mass transfer resistance in the membrane phase. During experiments, CO2 feed flows through the fiber lumens, while the …

Shaped Mems Contact, Ronald A. Coutu Jr., Paul E. Kladitis, Robert L. Crane

AFIT Patents

A MEMS switch fabrication process and apparatus inclusive of a bulbous rounded surface movable contact assembly that is integral with the switch movable element and achieving of long contact wear life with low contact electrical resistance. The disclosed process is compatible with semiconductor integrated circuit fabrication materials and procedures and includes an unusual photoresist reflow step in which the bulbous contact shape is quickly defined in three dimensions from more easily achieved integrated circuit mask and etching-defined precursor shapes. A plurality of differing photoresist materials are used in the process. A large part of the contact and contact spring formation …

Broadband Ir Polarizing Beam Splitter Using A Subwavelength-Structured One-Dimensional Photonic-Crystal Layer Embedded In A High-Index Prism, R. M.A. Azzam, H. K. Khanfar

Electrical Engineering Faculty Publications

An iterative procedure for the design of a polarizing beam splitter (PBS) that uses a form-birefringent, subwavelength-structured, one-dimensional photonic-crystal layer (SWS 1-D PCL) embedded in a high-index cubical prism is presented. The PBS is based on index matching and total transmission for the p polarization and total internal reflection for the s polarization at the prism-PCL interface at 45 degrees angle of incidence. A high extinction ratio in reflection (>50 dB) over the 4-12 mu m IR spectral range is achieved using a SWS 1-D PCL of ZnTe embedded in a ZnS cube within an external field of view …

Electronic Image Stabilization For Mobile Robotic Vision Systems, Michael John Smith

Theses and Dissertations

When a camera is affixed on a dynamic mobile robot, image stabilization is the first step towards more complex analysis on the video feed. This thesis presents a novel electronic image stabilization (EIS) algorithm for small inexpensive highly dynamic mobile robotic platforms with onboard camera systems. The algorithm combines optical flow motion parameter estimation with angular rate data provided by a strapdown inertial measurement unit (IMU). A discrete Kalman filter in feedforward configuration is used for optimal fusion of the two data sources. Performance evaluations are conducted by a simulated video truth model (capturing the effects of image translation, rotation, …

The Integrated Control Of The Rotor Side And Grid Side Converters In A Dfig To Reduce Both Power And Torque Pulsations During Network Voltage Unbalance Conditions., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

No abstract provided.

Electrical And Optical Properties Of Carbon Nanotube Intra-Connects And Conductive Polymers, Seon Woo Lee

Dissertations

Growth of individual carbon nanotube (CNT) intra-connects (bridges) between two prefabricated electrodes is a great challenge and a pre-requisite to the development of single electron devices. In this thesis, CNT intra-connects were fabricated and studied. Later on, the intra-connects were deposited with electrically conductive polymer (ECP) in the realization of CNT/ECP hybrids.

The process started by realizing two electrodes with sharp end on a silicon wafer using e-beam lithography. The intra-connects were then grown by use of chemical vapor deposition (CVD) technique. The intra-connects were later electroplated by various conductive polymers. The morphology, electrical conductivity of these intra-connects as well …

Practical Localized Waves Generation, Mohamed Ahmed Salem

Dissertations

Since the early works on localized waves (LW), extensive results were published on this important subject, from both the theoretical and the experimental points of view. Nevertheless, those experimental techniques of LW generation suffer from several shortcomings. A major one is that only pulse peaks were accredited. Either the full profile of the generated pulse was not reported, or it was not closely matching the theoretical profile. Additionally, low resolutions of the generated LWs were reported in the acoustic X-Waves. The conductors of the experiment attributed this effect to the limited bandwidth of the excitation elements.

The interest in the …

Non-Foster Matching Of An Rfid Antenna, Nedime Pelin Yalcin

Theses

In this thesis, novel designs of radio-frequency identification (RFID) tag antennas with better matching characteristics to achieve extended range for passive tags have been investigated in the ultra-high frequency (UHF) band. A variety of cavitybacked/coupled microstrip dipole antennas in 915 MHz range were considered. Additionally, a negative impedance converter designed to cancel out antenna's input capacitance at resonance frequency and to produce the real antenna input impedance was designed, simulated and implemented for an RFID antenna. Numerical simulations have been carried out using ORCAD software package (Cadence), ADS software package (Agilent) and HFSS software package (ANSYS/ANSOFT Inc). Antennas have been …

Design Of Acousto-Optic Chaos Based Secure Free-Space Optical Communication Links, Anjan K. Ghosh, Pramode K. Verma, Samuel Cheng, Robert C. Huck, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

We discuss the design of an acousto-optic cell based free space optical communication link where the data beam is made secure through chaos encryption. Using external signal modulation of the diffracted light from a hybrid acousto-optic cell chaos (or directly via incorporation in the sound-cell driver's bias voltage) encryption of data is possible. We have shown numerically that decryption of the encoded data is possible by using an identical acousto-optic system in the receiver.

X-Ray Photoemission Analysis Of Chemically Treated Gate Semiconductor Surfaces For Radiation Detector Applications, A. J. Nelson, A. M. Conway, B. W. Sturm, E. M. Behymer, C. E. Reinhardt, R. J. Nikolic, S. A. Payne, G. Pabst, K. C. Mandal

Faculty Publications

No abstract provided.

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

Analysis Of Partial Discharge Pulse Height Distribution Parameters, Vinay N. Nimbole

Electrical & Computer Engineering Theses & Dissertations

Partial Discharges (PD) have been traditionally used to assess the state of any insulation system and its remnant life. In earlier work, Perspex (PMMA) samples with a needle plane gap have been aged with AC voltage. Their tree growth was monitored simultaneously by collecting PD at regular intervals of time and taking microphotographs in real time without interrupting the aging voltage. The obtained partial discharge pulse amplitude records were clustered together into groups of class intervals. The sequence of PD pulse height records was quantified as a time series of shape (η), and scale (σ) parameters of a Weibull distribution. …

System Identification Of An On Orbit Spacecraft's Antenna Dynamics, Christopher M. Sylvester

Theses and Dissertations

As a result of previous efforts [Pachter, Barba, 2007] a tight control loop was designed to meet performance specifications while minimizing the feedback control system’s gains of a spacecraft mounted flexible antenna. Emphasis is now shifted to on orbit system identification of the antenna dynamics in order to increase nominal plant knowledge, estimate plant uncertainty bounds, as well as determine the disturbance band. Non-parametric system identification is undertaken. Knowledge of the plant dynamics along with the corresponding uncertainty bounds will provide for the design of a control system which meets the specifications (tracking and disturbance rejection) while at the same …

Analysis & Design Of Improved Multiphase Interleaving Dc-Dc Converter With Input-Output Bypass Capacitor, Rudi Rudianto

Master's Theses

As the transistor count per chip in computer microprocessors surpasses one billion, the semiconductor industry has become more and more concerned with meeting processor’s power requirements. This poses a design challenge for the power supply module, especially when the processor operates at low voltage range. For example, the electrical requirement for the newest Intel microprocessors has exceeded 100A with an input voltage of approximately 1V. To overcome this problem, multiphase DC-to-DC converters encased in a voltage regulator module (VRM) have become the standard means of supplying power to computer microprocessor.

This study proposes a new topology for the multiphase DC-to-DC …

A Graph-Based Approach To Symbolic Functional Decomposition Of Finite State Machines, Piotr Szotkowski, Mariusz Rawski, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

This paper discusses the symbolic functional decomposition method for implementing finite state machines in field-programmable gate array devices. This method is a viable alternative to the presently widespread two-step approaches to the problem, which consist of separate encoding and mapping stages; the proposed method does not have a separate decomposition step instead, the state's final encoding is introduced gradually on every decomposition iteration. Along with general description of the functional symbolic decomposition method's steps, the paper discusses various algorithms implementing the method and presents an example realisation of the most interesting algorithm. In the end, the paper compares the results …

I/Q Imbalance Mitigation For Space-Time Block Coded Communication Systems, Mingzheng Cao

Dissertations

Multiple-input multiple-output (MIMO) space-time block coded (STBC) wireless communication systems provide reliable data transmissions by exploiting the spatial diversity in fading channels. However, due to component imperfections, the in-phase/quadrature (I/Q) imbalance caused by the non-ideal matching between the relative amplitudes and phases of the I and Q branches always exists in the practical implementation of MIMO STBC communication systems. Such distortion results in a complex conjugate term of the intended signal in the time domain, hence a mirror-image term in the frequency domain, in the data structure. Consequently, I/Q imbalance increases the symbol error rate (SER) drastically in MIMO STBC …

Clustered Wireless Sensor Networks, Renita Margaret Machado

Dissertations

The study of topology in randomly deployed wireless sensor networks (WSNs) is important in addressing the fundamental issue of stochastic coverage resulting from randomness in the deployment procedure and power management algorithms. This dissertation defines and studies clustered WSNs, WSNs whose topology due to the deployment procedure and the application requirements results in the phenomenon of clustering or clumping of nodes. The first part of this dissertation analyzes a range of topologies of clustered WSNs and their impact on the primary sensing objectives of coverage and connectivity. By exploiting the inherent advantages of clustered topologies of nodes, this dissertation presents …

Low Voltage, Low Power, Bulk-Driven Amplifier, Shama Huda

Electrical Engineering Undergraduate Honors Theses

The importance of low voltage and low powered electronics is increasing with advances in medical electronics. This branch of electronics specifically requires low voltage and low power to make efficient innovative medical equipment. Low power electronics are also desirable because it conserves energy and power. This paper proposes a design of a differential in - differential our amplifier that uses a bulk-driven differential pair for the input pair. In addition, it also used bulk-driven current mirrors for the tail current sink and the active loads. The bulkdriven technique helps to achieve the low voltage design. 90nm CMOS technology was considered …

Object Trajectory Estimation Using Optical Flow, Shuo Liu

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Object trajectory tracking is an important topic in many different areas. It is widely used in robot technology, traffic, movie industry, and others. Optical flow is a useful method in the object tracking branch and it can calculate the motion of each pixel between two frames, and thus it provides a possible way to get the trajectory of objects. There are numerous papers describing the implementation of optical flow. Some results are acceptable, but in many projects, there are limitations. In most previous applications, because the camera is usually static, it is easy to apply optical flow to identify the …

Robust Image And Video Coding With Adaptive Rate Control, Hongqiang Wang

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

This dissertation is focused on the problem of rate allocation in a resource constrained environment and robustness of video coding over noise channels. A new rate allocation scheme that combines the traditional PCRD-Opt algorithm with the rho domain analysis is proposed for wavelet based image coders. The proposed scheme provides competitive performance as compared with the optimal PCRD-Opt algorithm, while with great reduction on complexity and computational costs. Rate allocation is developed for the Region-Of-Interest (ROI) in the wavelet transform domain for image coding. A recursive region growing method that deter mines the ROI in the transform domain is proposed. …

Low Power Fft Processor Design Considerations For Ofdm Communications, David Layne Rushforth

UNLV Theses, Dissertations, Professional Papers, and Capstones

Today's emerging communication technologies require fast processing as well as efficient use of resources. This project specifically addresses the power-efficient design of an FFT processor as it relates to OFDM communications such as cognitive radio. The Fast Fourier Transform (FFT) processor is what enables the efficient modulation in OFDM. As the FFT processor is the most computationally intensive component in OFDM communication, the power efficiency improvement of this component can have great impacts on the overall system. These impacts are significant considering the number of mobile and remote communication devices that rely on limited battery-powered operation. This project explores current …

Surface Wave Propagation In A Dielectric Waveguide Loaded With An Anisotropic, Conductive, And Spatially Dispersive Substrate, Tushar Andriyas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents an analytical treatment of surface waves inside a dielectric slab loaded with a conductive and spatially dispersive semiconductor-like substrate. The work is primarily focused on the modelling of the substrate and getting the field solutions out from the Helmholtz equation. Appropriate boundary conditions have been used in order to get a unique dispersion relation. The surface wave modes are then extracted from the relation by using a root-searching algorithm, which in this work is the MATLAB Genetic Algorithm toolbox. Many different substrate configurations have been considered, starting from the very basic isotropic case to the most complex …

Full-Wave Analyses Of Nano-Electromechanical Systems Integrated Multifunctional Reconfigurable Antennas, Xiaoyan Yuan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis work builds upon the theoretical studies and full-wave analysis of radio frequency micro- and nano-electromechanical systems (RF M/NEMS) integrated multi-functional reconfigurable antennas(MRAs). This is a part of the overall μN∈MS research efforts performed in the RF NEMS Laboratory at USU, which includes design, microfabrication, test, and characterization of M/NEMS integrated congitive wireless communication systems (fig. A.1).

The thesis work focuses on two MRAs. 1) A triple bands patch antenna which can operate at 800, 2400, and 4900 MHz in response to public safety wireless communication systems. 2) A multi-frequency multi-polarization MRA for wireless personal area networking application (WPAN) …